EricssonメーカーTT1222の使用説明書/サービス説明書
ページ先へ移動 of 20
TT1222 MPEG-2 SD 4:2:0 Professional Receive r Software Version 6.1.1 (and later) USER GUIDE EN/LZT 790 0002/1 R1A.
TT1222 MPEG-2 SD 4:2:0 Professional Receiver Copyright © Copyright Ericsson AB 2010. All rights reserved. Disclaimer No part of this document may be reproduced in any form without the written permission of the copyright owner.
Contents Contents 1 Introduction ............................................................................................ 5 1.1 Who Should Use this User Guide? .......................................................... 5 1.2 What Equipment is Covered by this User Guide? .
Contents EN/LZT 790 0002/1 R1A 2011-02 -21 4 (20) Table 3 Software Options ......................................................................................6 Table 4 Types of Connector .............................................................
1BIntroduction 1 Introduction 1.1 Who Should Use this User Guide? This User Guide is written for operators/users of the TT1222 MPEG-2 SD 4:2:0 Professional Receiver to assist in installation and operation. It is not inten ded to be a detailed source of information.
1BIntroduction 1.3 Hardware Options See Table 2 for a list of hardware options available with the Receiver. Detailed information is in the Reference Guide .
2BInstalling the Equipment 2 Inst alling the Equipment 2.1 Introduction For best performance and reliability follow the instructions for site requirements and installation in the Reference Guide and only use installation accessories recommended by the manufacturers.
2BInstalling the Equipment Warnings! The Technical Earth is not a Protective earth for electric shock protection. This unit must be correctly earthed through the molded plug supplied. If the local mains supply does not have an earth conductor do not connect the unit.
2BInstalling the Equipment T able 4 T ypes of Connector Type of Connector Description Inputs Technical Earth Connect the Receiver's Te chnical earth to a suitable point. RS232 Remote A 9-way, D-type male connector provide s a connection to a PC for remote control and software uplo ad.
2BInstalling the Equipment 2.5 Connecting the Receiver to the Power Supply Warnings! Do not overload wall outlets and extension cords as this can r esult in a risk of fire or electric shock. As no mains switch is fitted to this unit, ensure the local powe r supply is switched OFF before connecting the supply cord.
3BOperating the Equipment from the Front Panel 3 Operating the Equipment from the Front Panel 3.1 Introduction The front panel display and keypad may be used to configure, control and monitor the unit when an external control system is not used. 3.2 Navigating the Menus 3.
3BOperating the Equipment from the Front Panel 3.2.3 Editing a Menu Value 3.2.3.1 Accessing the Edit Mode To edit a menu item, first select the item using the Right arrow key.
4BTypical Operation and Setting of Parameters 4 T ypical Operation and Setting of Parameters Refer to Section 3.2 onwards on how to navigate the menus. To view the menu structure and for more detailed information regarding parameters not mentioned in this User Guide refer to the Reference Guide .
4BTypical Operation and Setting of Parameters Navigate to the TV Service Menu . Select the following options: • Service ID - display or change the service ID for the decoded Service. • Service List - press the Up and Down arrows until the selected Service is displayed.
4BTypical Operation and Setting of Parameters • Line Standard - change the default line standard to be used when the unit is not decoding video: 525 or 625 selectable. • 525 Video - change the preferred 525 video format to be used when the unit is not decoding video: NTSC, PALM selectable.
5BTypical Configurations 5 T ypical Configurations It may also be necessary to modify some of the other default settings to suit the particular installation, see the Reference Guide for details.
6BEquipment Packaging 6 Equipment Packaging 6.1.1 Packaging Statement The outer carton and any cardboard inserts are made from 82% recycled material and are fully recyclable. The Stratocell ® or Ethafoam 220 ® polyethylene foam inserts can be easily recycled with other low density polyethylene (LDPE) materials 6.
7BMaterials Declarations 7 Materials Declarations 7.1 Overview Ericsson products are designed and manufactured in keeping with good environmental practice. Our component and materials selection policy prohibits the use of a range of potentially hazardous materials.
8BDisposal of this Equipment 8 Disposal of this Equipment 8.1 General Dispose of this equipment safely at the end of its life. Local codes and/or environmental restrictions may affect its disposal. Regulations, policies an d/or environmental restrictions differ throughout the world.
9BRecycling EN/LZT 790 0002/1 R1A 2011-02 -21 20 (20) 9 Recycling Ericsson SA TV Recycling has a process facility that enables customers t o return Old and End-of-Life Products for recycling if it is required. Ericsson provides assistance to customers and recyclers thr ough our Ericsson and SATV Recycling eBusiness Portal.
デバイスEricsson TT1222の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Ericsson TT1222をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEricsson TT1222の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ericsson TT1222の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ericsson TT1222で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ericsson TT1222を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEricsson TT1222の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ericsson TT1222に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEricsson TT1222デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。