First Alertメーカーfa1600cの使用説明書/サービス説明書
ページ先へ移動 of 80
) ) $ $ & & & & $ $ & & % % ) ) L L U U H H D D Q Q G G % % X X U U J J O O D D U U 8 8 V V H .
– 2 – TABLE OF CONTENTS SYSTEM OVERVIEW .................................... 4 General ....................................................... 4 A Partitioned System .................................. 4 Zones ......................................
– 3 – SPEED KEY (MACROS) .............................. 41 General Information .................................. 41 Defining ..................................................... 41 Executing .................................................. 42 ACCESS DOOR CONTRO L .
– 4 – System Overview General Congratulations on your ownership of an First Alert Pa rtitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today.
– 5 – System Overview (cont’d) Zones Your system's sensing devices have been assigned to various "zones." For example, the sensing device on y our Entry/Ex it door may have been assigned to zone 001, se nsing devices on windows in the master bedroom to zone 002, and so on.
– 6 – System Overview (cont’d) The following table lists the four different arming modes and the results of each. Features For Each Arming Mode Arming Mode Exit Delay Entry Delay Perimeter Armed.
– 7 – System Overview (cont’d) Using Schedules Your system may have been programmed with schedules for automatically arming, disarming and activating v arious devices and/or performing other system functions at predetermined times.
– 8 – System Overview (cont’d) Master Keypad Operation A "Master" keypad is one on which the status of all 8 partitions is displayed simultaneously. A user can get more information about a certain partition by simply entering ✴ + the desired partition number (1-8).
– 9 – System Overview (cont’d) • Control 4204/4204CF relays devices through the #70 Manual Relay Activation mode. Complete information regarding the use of this feature is provided in a separate m anual entitled PHONE ACCESS USER'S GUIDE, which accompanies the 4285 or 4286 VIP module.
– 10 – About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises , it indicates that an alarm has occur red during your absenc e. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby s afe location. Your keypads allow you to control all system functions.
– 11 – Functions Of The Keypad ARMED READY Prof essional OFF AWAY STAY MAXIMUM TEST BYPASS INSTANT CODE CHIME READY 1 A B C D 2 3 4 5 6 7 8 9 * 0# First Alert 1 15 14 2 5 16 8 12 13 11 9 10 7 6 4 .
– 12 – Functions Of The Keypad (cont’d) 1. ALPHA DISPL AY WINDOW: A 2- line, 32-character Liquid Crystal Display (LC D). Displays protection point identification and system status, messages, and u ser instructions.
– 13 – Functions Of The Keypad (cont’d) 10. CHIME KEY: Turns on & off the CHIME mode. When on, any entry through a protected delay or perimeter zone while the system is disarmed will cause a tone to sound at the Keypa d(s).
– 14 – Entry/Exit Delays General Information Your system has preset time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you ti me to leave through the designated exit door without setting off an alarm.
– 15 – Security Codes & Authority Levels General Information At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system.
– 16 – Security Codes & Authority Levels (cont’d) system. Th e security code must always be used to disarm the sy stem, however. Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to y ou, there are certain system functions you may be prohibited from performing.
– 17 – Security Codes & Authority Levels (cont’d) Level 7 Limi ted Use : Can arm and disarm the system for a predetermined number of times. Use #84 mode to set number of times. To view your authority level and system capabilities: 1. Enter your code + ✴ + ✴ .
– 18 – Security Codes & Authority Levels (cont’d) To Exit User Edit Mode You can exit any of the user edit modes described on the following pages at any time by doing the following: 1. Press either ✴ or # , or don't press any key for 10 seconds.
– 19 – Security Codes & Authority Levels (cont’d) RF BUTTON ? 0 = NO , 1 = YES This prompt will appear if a 5800 series button transmitter has been supplied and has not yet been assigned to a user. Press 1 if a button transmitter will be assigned to this user.
– 20 – Security Codes & Authority Levels (cont’d) PART. 1 A0 * WHSE USER 003 AUTH=3G. When all partitions have been displayed, the keypad will scroll through the partition(s) to which access has been as s igned, and w ill display the user number, authority level and global arm option for each.
– 21 – Security Codes & Authority Levels (cont’d) ADD NEW USER? 0 = NO , 1 = YES The system will recognize that the user number is already in use and will prompt whether or not this is a new user. Enter 0 to change the existing user's code to the code entered in step 3.
– 22 – Accessing Other Partitions To Access Another Partit ion Each key pad is assigned a default partition for display purposes, and will show only that partition's information. But, if the user is authorized, a keypad in one partition can be used to perform system functions in other partitions by using the GOTO command.
– 23 – Accessing Other Partitions (cont’d) Master Keypad Operation A "Master" keypad is one that reflects the status of the entire system (Partitions 1-8) on its display.
– 24 – Accessing Other Partitions (cont’d) FAULT 002 LOADING DOCK WINDOW Additional zone faults will be displayed one at a time. To display a new partition's status, press ✴ + [Partition No.]. This will display the status of the new partition.
– 25 – Accessing Other Partitions (cont’d) Common Lobby Operation When an installation consists of a partition that is shared by users of other partitions in a building, that shared partition may be assigned as a “common lobby” partition for the system.
– 26 – Accessing Other Partitions (cont’d) c. Arming the last partition programmed to arm the lobby will automatically attempt to arm the lobby. If any faults ex ist in the lobby partition, or another partition that affects the lobby is disarmed, the lobby cannot be armed, and the message “UNABLE TO ARM LOBBY PARTITION” will be displayed.
– 27 – Accessing Other Partitions (cont’d) Other Methods of Arming/Disarming When arming or disarming a partition that affects and/or arms the common lobby in one of the following manners, lobby.
– 28 – Checking For Open Zones Using the ✴ READY Key Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not Ready" message.
– 29 – Displaying All Zone Descriptors Using the ✴ READY Key The Alpha Keypads can also display all the zone descriptors that are programmed in your system. The abbreviated instructions for the READY key will appear first, followed by the zone descriptors.
– 30 – Bypassing Protection Zones Using the 6 BYPASS Key This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed.
– 31 – Bypassing Protection Zones (cont’d) Quick Bypass Your system allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually. Note: All bypasses are removed when an OFF sequence (security code plus OFF) is performed.
– 32 – Arming Perimeter Only (With Ent ry Delay ON) Using the 3 STAY key Use this key when you are staying home, but might expect someone to use the entrance door later. When armed in STAY mode, the system will sound an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises.
– 33 – Arming Perimeter Only (With Ent ry Delay OFF) Using the 7 INSTANT Key Use this key when you are staying home and do not expect anyone to use the entrance door. When armed in INSTANT mode, the system will sound an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises.
– 34 – Arming All Protection (With Ent ry Delay ON) Using the 2 AWAY Key Use this key when no one will be staying on the premises. When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises.
– 35 – Arming All Protection (With Ent ry Delay OFF) Using the 4 MAXIMUM Key Use this key when the premises will be vacant for extended periods of time such as vacations, etc.
– 36 – Disarming And Silencing Alarms Using the 1 OFF Key The OFF key is used to disarm the system and to silence alarm and trouble sounds. See "SUMMARY OF AUDIBLE NO TIFICATION" section for information which will help you to distinguish between FIRE and BURGLARY alar m s o und s .
– 37 – Using The Keyswitch General Your system may be equipped with a key switch for use when arming and disarming a partition. A red and green light on the keyswitch plate indicate the status of your system as follows: Green Light: Lights when the system is disarmed and ready to be armed (no open zones).
– 38 – Chime Mode Using the 9 Key Your system can be set to alert you to the opening of a door or window while it is disarmed by using CHIME mode. When activated, three tones will sound at the Keypad whenever a protected perimeter door or window is opened, and the Not Ready message will be displayed.
– 39 – Viewing Central Station Messages General Information Users of the system may periodically receive messages on their display screens from their monitoring agency or installer. When a message is waiting to be viewed, the message shown below will appear.
– 40 – Panic Keys (For Manually Activating Silent And/Or Audible Alarms) Using Panic Keys Your system may have been programmed to use special key combinations to manually activate panic functions. The functions that might be programmed are Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
– 41 – Speed Key (Macros) General Information Th e “A ”, “B ”, “C”, an d / or “D ” ke y s ca n be u se d to a ct i va t e a st r in g o f commands up to 32 keystrok es each. These commands are k nown as a macro and are st ored in the s ystem’s memory.
– 42 – interprets the use of the [#] key in a Speed Key sequence as its designated function only. Speed Key (Macros) (cont’d) Executing To execute a Speed Key sequence, do the following: If a lettered key, A- B- C, has been assigned as a Speed Key, press and hold down the appropriate key (about 2 seconds).
– 43 – Access Door Control General Information Your system may be set up such that a locked access door (such as in a lobby) can be unlocked momentarily or for a specific period of time, using a keypad command Ask your installer if this has been done in our system.
– 44 – Using #70 Relay Menu Mode General Information Your system may be set up so that certain lights or other devices can be turned on or off by using the #70 command from either a k eypad or a telephone keypad (if 4285 or 4286 VIP module is used).
– 45 – Using #70 Relay Menu Mode (cont’d) NN DEVICE IS OFF HIT THE "T " KEY Voice: " voice descriptor DEVICE nn ON/ OFF. TO EXIT ENTER 00 NOW" From a keypad, press T to continue. T he ENTER DEVICE NO. prompt w ill appear. From a telephone keypad, enter 00 to exit, or enter the next relay number to be programmed.
– 46 – Using Schedules Delaying the Closing Time Your system's programmed schedules may automatically arm the system at a predetermined time. In the event a user must stay on the premises later than usual, users w ith mas ter or manager authority levels can manually delay the automatic arming (closing) time up to 2 hours.
– 47 – Using Schedules (cont’d) Schedules are comprised of an arming (closing) time window and a disarming (opening) time window. A time window is simply a defined period of time, at the end of which arming or disarming will occur. Before programming a temporary schedule, use a worksheet similar to the one below to plan your schedule.
– 48 – Using Schedules (cont’d) MON DISARM WIND. 07:45AM 08:45AM The cursor will be positioned on the tens of hours digit of the start time for Monday's disarm window. Enter the desired hour. Press * to move to the minutes field. The minutes are entered in the same manner.
– 49 – Using Schedules (cont’d) DAYS ? MTWTFSS HIT 0-7 X X This is the prompt that actually activates the temporary schedule, and allows the temporary schedule to be customized to a particular week's needs. To select the days which are to be activated, enter the desired number 1-7 (Monday = 1).
– 50 – Programming Device Timers General Information Device timers consist of an ON time & an OFF time, and selected days of the week in which they are active. There are up to 20 timers that can be used to control various devices, such as lights or appliances.
– 51 – Programming Device Timers (cont’d) See your ins taller for device num bers . 00 ENTER OUTPUT# 00 Enter the desired output device number (1- 32). As the number is entered, the device's description will appear. To delete a previously programmed timer, enter 00 as the output number.
– 52 – Programming Device Timers (cont’d) 00 DAYS? MTWTFSS HIT 0-7 X X Select the days on which the device is to be activated by entering 1-7 (Monday = 1). An "X" will appear under that day, indicating the output for that day is active.
– 53 – Event Log Procedures General Information The system has the ability to record various events in a history log wherein each event is recorded in one of five categories (listed below), with the time and date of its occurrence.
– 54 – Event Logging Procedures (continued) 4. Use the [3] & [1] keys (for next and previous categories respec- tively) to display the categories of events. Press [8] to select a category and display the first event. Press [8] again for the next previous event.
– 55 – Testing The System (To Be Conducted Weekly) Using the 5 TEST Key The TEST key puts your system into Test mode, which allows each protection point to be checked for proper operation. 1. Disarm the system and close all protected windows, doors, etc.
– 56 – Testing The System (cont’d) Testing Your System 1. Open and close each protected door and window in turn and listen for three beeps. The identification of each faulted protection point should appear on the display. 2. Walk in front of any interior motion detectors (if used) and listen for three beeps as movement is detected.
– 57 – Fire Alarm System General Your fire alarm system (if installed) is on 24 hours a day, providing continuous protection. In the event of an emergency, the installed smoke and heat detectors will automatically send signals to your Control/Communicator, trigg ering a loud interrupting sound from the keypad.
– 58 – Fire Alarm System (cont’d) 2. If the keypad does not indicate a READY condition after the second OFF sequence, press the READY key to display the zone(s) that a re faulted. Be su re to check that smoke detectors are not responding to smoke or heat producing objects in their vicinity.
– 59 – Fire Alarm System (cont’d) 2. The test may be stopped by entering any security code and pressing OFF . NOTE: The system continues to monitor all 24 hour zones (fire, panic, etc.), while this test is active, and will end the test when an alarm condition is detected.
– 60 – Trouble Conditions Typical Trouble Displays The word CHECK or TRBL on the Keypad's display, accompanied by a rapid "beeping " at the Keypad, indicates that there is a trouble condition in the system. To silence the beeping sound for trouble conditions, press any key.
– 61 – Trouble Conditions (cont’d) 970: Bell 1 Output 975: Dialer 2 971: Bell 2 Output 988: 2 nd RF Receiver – not receiving 972: Earth Ground Fault signals 973: J2 Trigger Output 990: 1 st RF Receiver – not receiving 974: Dialer 1 signals 997: Polling Loop Short • A display of " COMM.
– 62 – Trouble Conditions (cont’d) Power Failure If the POWER indicator is off, operating power for the system has stoppe d and is inoperative. CALL FO R SERVICE IMMEDIATELY. If the POWER indicator is on, but the messag e " AC LOS S " is displayed, the Keypad is operating on battery power only.
– 63 – Recommendations For Proper Protection THE FOLLOWI NG RECOMME NDATION S FOR THE LOCA TION O F FIRE AND BURGLARY DET ECTION DEVICES HEL P PROVIDE PROPER COVERAGE FOR THE PROTECT ED PREMISES.
– 64 – Recommendations For Proper Protection (cont’d) DINING KITCHEN BEDROOM BEDROOM BEDROOM BEDROOM LIVING ROOM ✪ ✪ ✪ ✪ ✪ ▲ ▲ BEDROOM BDRM BDRM DINING LIVING ROOM TV ROOM KITCHEN ■ ■ ■ ✪ ✪ ✪ ✪✪ ✪ ▲ ✪ ✪ ✪ BEDROOM BEDROOM TO BR ■ ■ ■ ■ ■ LVNG RM BASEMENT KTCHN ▲ ▲ .
– 65 – Recommendations For Proper Protection (cont’d) Recommendations For Proper Intrusion Protection For proper intrusion coverage, sensors should be located at every possible point of entry to a home or commercial premises. This would include any skylights that may be present, and the upper w indows in a multi-level building.
– 66 – Emergency Evacuation Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association: 1. Position yo ur detector or your interior and/or exterior sounders so that they can be heard by all occupants.
– 67 – Maintaining Your System Taking Care of Your System The components of your security sy stem are designed to be as free of maintenance as possible. How ever, there are some things you can do to make sure that your system is in reliable working condition.
– 68 – Maintaining Your System (cont’d) Note: The low battery message comes on as a warning that battery replacement in indicated sen sor(s) is due within 30 day s. In the meantime, the sensor(s) cau sing the low battery in dication is still fully operational.
– 69 – Quick Guide To System Functions FUNCTION PRO CEDURE COMM ENTS Check Zones Press [ ✱ ]. To view faulted zones when system not ready. Displa y All Descript ors Press and hold [ ✱ ] for 5 seconds. Dis plays all alpha desc riptors programmed by installer .
– 70 – Quick Guide To System Functions (cont’d) FUNCTION PRO CEDURE COMM ENTS Change a User's Code Enter master/manager code. Press CODE [8]. Enter user's 3-digit number. Enter new code for that us er. Press 0 ( No) at prompt. Master & Manager lev el users can change their own or other us ers' codes.
– 71 – Summary Of Audible Notification (Alpha Display Keypads) SOUND CAUSE DISPLAY LOUD, INTERRUP TED* Keypad & E xternal FIRE ALARM FIRE is display ed; descript or of zone in alarm is display ed.
– 72 – Glossary The following terms are used throughout the manual. ARM/DISARM: “Armed” simply means that the burglary portion of your system is turned ON and is in a state of readiness. “Disarmed” means that the burg lary system is turned OFF , and must be rearmed to become operational.
– 73 – UL NOTICE: This is a “GRADE A” system. “FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT” This equipment has been tested to FCC requirem ents and has been found acceptable for use.
– 74 – “FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 NOTICE This equipment complies with Par t 68 of the FCC rules. On the front cov er of this equipment is a label that contains, among other information, the FCC registration number and r inger equivalence number (REN) for this equipment.
– 75 – CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) ST ATEMENT NOTICE The Canadian Department of Communi cations label identif ies certified equipm ent. This c ertificat ion means that the equipment meets cert ain telecommuni cations network protec tive, operat ional and s afety requirements .
– 76 – WARNING! THE LIMITAT IONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether com mercial or residential, is subject to compromise or failure to warn for a variety of reasons.
– 77 – WARNING! THE LIMITAT IONS OF THIS ALARM SYSTEM (continued) • Alarm warning devices such as sirens, bells or horns may not alert people or wake up sleepers if they are located on the other side of closed or partly open doors.
–78– Index #70 command ........................................ 44 4285 or 4286 VIP modu le ................. 8, 44 AC Loss .................................................. 62 Access Another Partitio n...................... 22 Access Doo r .....
– 79 – Low Battery ........................................... 67 Low Battery Warning ........................... 68 LSENS ................................................... 61 macro ..................................................... 41 Macros.
¬19¢Ll N6020-4V2 1/99 LIMITED WARRANTY Pittway Corporation, and its divisions, subs idiaries and affiliates ("Seller"), 165 Eileen Way, Syosset, New York 11791, warran.
デバイスFirst Alert fa1600cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
First Alert fa1600cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFirst Alert fa1600cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。First Alert fa1600cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。First Alert fa1600cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
First Alert fa1600cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFirst Alert fa1600cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、First Alert fa1600cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFirst Alert fa1600cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。