Fisher-PriceメーカーDORA THE EXPLORER H7332の使用説明書/サービス説明書
ページ先へ移動 of 24
Please read this manual and save it with your original sales receipt. T ools needed for assembly: Phillips Screwdriver, Adjustable Wrench (or Pliers), Hammer , and Safety Scissors (all not included). Use only with a Power Wheels ® 12 Volt Lead-Acid Rechargeable Battery and a Power Wheels ® 12 V olt Charger with type 12V connector (both included).
2 T ABLE OF CONTENTS A H7332pr-0920 • Y our new vehicle requires adult assembly . Please set aside at least 45 minutes for assembly . • Y ou must charge your battery for 18 - 30 hours before you use your vehicle for the first time . We recommend that you start charging your battery before beginning assembly .
H7332pr-0920 • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only . • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas.
H7332pr-0920 4 P ARTS C • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
5 T ABLE OF CONTENTS A H7332pr-0920 Fas ten ers Sho wn Actua l S ize For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver .
6 T ABLE OF CONTENTS A H7332pr-0920 T M 6 P ARTS PICTURE D 2 4 8 6 9 15 1 V ehi cle 2 Cowl ing 3 Seat 4 Whee l - 4 5 Hubc ap - 4 6 Cap Nu t - 5 7 Ste eri ng Co lum n 8 Hand leb ar Ne ck 9 12 V olt Bat.
H7332pr-0920 Important Notes • Y our new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle. • The battery must be upright while charging.
8 T ABLE OF CONTENTS A H7332pr-0920 Battery Charger Connector 8 BA TTER Y CHARGING E H7332pr-0920 1 2 1 2 • Plug the charger connector into the battery . • Plug the charger into a standard 120 volt wall outlet . Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”.
H7332pr-0920 3 • Slide a hubcap, indented side down, onto the rear axle. • Slide a wheel onto the rear axle. Make sure the ribs on the wheel face up. • Slide a rear wheel driver , ring side down, onto the rear axle. Fit the grooves on the rear wheel driver onto the ribs on the wheel.
H7332pr-0920 • Face the front end of the vehicle. • Slide a 7 / 16 " washer onto one of the front axles. • Slide a round bushing, ring end first, onto the front axle. • Slide a wheel (ribbed side first) onto the front axle. • Slide a hubcap (indented side out) onto the front axle.
H7332pr-0920 • Press firmly on the front of the cowling to snap the four, front tabs into the slots in the vehicle. Make sure the side and rear tabs stay aligned with the slots. Note: Pull up on the front of the front end of the vehicle while pressing down on the cowling to make sure the front tabs snap into the slots.
H7332pr-0920 1 0 Hint: Y ou may want the help of another adult to support the steering column near the steering linkage while assembling the handlebar to the vehicle. • Slide the steering bushing, narrow side down, onto the steering column and into the vehicle neck.
H7332pr-0920 • Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehicle. • Now , fit the back handlebar assembly to the front handlebar assembly . • Insert two #6 x 1 / 2 " screws into the two top, center holes in the back handlebar assembly , as shown.
14 ASSEMBL Y F H7332pr-0920 • Insert six #6 x 1" screws through the back handlebar assembly , as shown. T ighten the screws. 1 8 R • Apply labels as shown. For best results, make sure your hands and the areas to which the labels will be applied are clean and dry .
H7332pr-0920 T M Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • W ash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
H7332pr-0920 IMPORT ANT! Use only a Power Wheels ® 12 volt lead-acid rechargeable battery . Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enc losed Power Whee ls ® 12 volt charger before operating your vehicle for the first time.
H7332pr-0920 • Y our Power Wheels ® battery is a non-spillable sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner. • Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. • Do not dispose of a lead-acid battery in your regular, household trash.
H7332pr-0920 T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury .
H7332pr-0920 REMOVE LOCK-OUT SCREW ON SIDE OF SHIFTER FOR HIGH SPEED OPERATION Lock-Out Screw Shifter IMPORT ANT! Use this vehicle ONL Y outdoors. Most interior floor- ing can be damaged by riding this vehicle indoors. Fisher-Price ® will not be responsible for damage to the floor if the vehicle is used indoors.
H7332pr-0920 20 Bumper-to-Bumper* Limited W arranty One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 12 volt battery .
H7332pr-0920 PROBLEM POSSIBLE CAUSE SOLUTION V ehicl e does not run Unde rch arge d batte ry Char ge the batter y . A new batte ry shou ld hav e been char ged for at least 18 hours befor e using the vehi cle for the fi rst tim e. After first- time use, rec harg e the bat tery for at lea st 14 hour s afte r each use .
H7332pr-0920 Shor t run tim e (Less than Unde rch arge d batte ry Char ge the batter y . A new batte ry shou ld hav e been 1 - 3 hours per charg e) char ged for at least 18 hours befor e using the vehi cle for the fi rst tim e. After first- time use, rec harg e the bat tery for at lea st 14 hour s afte r each use .
H7332pr-0920 V ehicl e runs in low spee d, but High Speed lock-o ut not discon nect ed The ve hicl e was pre- set to run only in low speed . T o al low does not run in hig h spee d the vehic le to run in low and high speed , you mus t disco nnec t the High Spe ed Lock -Ou t.
PRINTED IN CHINA 73610a-0920 Or contact your local independently owned and operated Power Wheels ® Authorized Service Center . For the location nearest you, visit us on-line at www .powerwheels.com . Fish er- Pric e, Inc ., a sub sidi ary of Matte l, Inc .
デバイスFisher-Price DORA THE EXPLORER H7332の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fisher-Price DORA THE EXPLORER H7332をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFisher-Price DORA THE EXPLORER H7332の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fisher-Price DORA THE EXPLORER H7332の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fisher-Price DORA THE EXPLORER H7332で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fisher-Price DORA THE EXPLORER H7332を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFisher-Price DORA THE EXPLORER H7332の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fisher-Price DORA THE EXPLORER H7332に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFisher-Price DORA THE EXPLORER H7332デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
