Fisher-PriceメーカーH0150の使用説明書/サービス説明書
ページ先へ移動 of 28
Owner's Manual with Assembly Instructions For Model H0150 In an effort to provide the best products possible, we periodically make product modifications. Actual products may not be identical to items pictured above. Please read this manual and save it with y our original sales receipt.
2 T able of Contents Important Information A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 B W arnings and Cautions . . . . . . . . . . .
3 CA UTION • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only . W ARNING • Prevent Injuries and Deaths • Direct Adult Supervision Required • Keep Children Within Safe Riding Areas.
4 Roll Bar Parts C Seat • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
5 Parts Steering Wheel Cap Steering Column Sound Box Cover Mirror V ase Sound Box Steering Wheel Short Seat Belt - 2 Long Seat Belt Flower Left Right Running Boards Parts not shown: Label Sheet - 2.
6 12 V olt Battery (Located in a cardboard box in the front end of the vehicle. 12-V O L T C H A R G E R 12 V olt Charger Pb Parts All Shown Actual Size .354 Cap Nut - 2 .354" *For your convenience, we’ve included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver .
1. V ehicle 2. Dash 3. Seat 4. Roll Bar 5. Windshield 6. Right Running Board 7. Hood 8. V ase 9. Mirror 10. 12 V olt Charger 1 1. 12 V olt Battery 12. Steering Wheel 13. Steering Wheel Cap 14. Flower 15 Sound Box Cover 16. Sound Box 17. Long Seat Belt Strap 18.
8 Battery Charging E Important Notes • Y our new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • W e recommend that you start charging your battery before beginning assembly of your new vehicle.
9 Battery Charging Pb • Plug the charger connector into the battery . • Plug the charger into a standard 120 volt wall outlet . Note: If power flow to the wall outlet is controlled by a switch, make sure the switch is “ON”. • Before first-time use, charge the battery for at least 18 hours.
10 Assembly F Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery , or help in assembly of the vehicle.
11 Assembly • Fit pegs on the rear view mirror into the holes in the dash. • Insert two #8 x 3 / 4 " screws through the bottom of the dash and tighten. Dash Rear View Mirror Pegs T op V iew • Fit the tab on the vase into the groove in the dash.
12 Assembly Sound Box Cover Lower Ta b Upper Ta b Upper Slot Lower Slot • First, fit the lower tab on the sound box cover into the lower slot in the dash .
13 Assembly • Apply the labels to dash, as shown. 9 Dash • Fit the dash onto the top, front end of the vehicle. • Insert four #8 x 3 / 4 " screws into the dash and tighten. 10 Slots Slots Windshield • Fit the eight tabs on the windshield into the eight slots in the top, front end of the vehicle.
Assembly 15 Fasteners Seat Center Slots Long Seat Belt Seat T abs T abs Slots Slots Slot • T urn the seat face down on a flat surface. • Position the long seat belt so the fasteners face each other , as shown. • Insert each end of the long seat belt through the two center slots in the seat bottom.
15 Assembly Steering Column • Fit the straight end of the steering column through the hole in the lower steering linkage and the opening in the vehicle floor . 17 Curved End of Steering Column Upper Steering Linkage • Fit the curved end of the steering column through the hole in the upper steering linkage.
16 Assembly Cap Nut End of Steering Column • Fit a cap nut on the end of the steering column. • T ap the cap nut with a hammer to secure it on the end of the steering column. Hint: Y ou ma y need the help of another adult to hold the steering column in place while you tap the cap nut.
17 Assembly Slots Slots Roll Bar T abs V ase Plug Flower • Fit the six tabs on the roll bar into the slots in the top, rear edge of the vehicle. • Push near each tab in until the roll bar “snaps” into place .
18 Label Decoration G Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind: • W ash your hands before applying the labels. • Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
Label Decoration Back / Right Side View 19 16 34 5 26 12 19 12 35 8 36 11 Both sides of flower . 37 4 40 39 41 24 20.
20 IMPORT ANT! Use only Power Wheels ® 12 volt battery . Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time.
21 If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. See information below for proper disposal. If acid comes in contact with skin or eyes, flush with cool water for at least 15 minutes and call a physician.
22 Rules for Safe Driving K T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury .
23 How to Operate Y our V ehicle L IMPORT ANT! As assembled, your vehicle is ready to roll in low speed (2 1 / 2 mph, maximum). When your child is ready to drive the vehicle in high speed (5 mph, maximum), follow the instructions on this page to disconnect the high speed lock-out.
24 How to Operate Y our V ehicle Bumper-to-Bumper* Limited W arranty N *One year limited warranty from the date of purchase on the Power Wheels ® vehicle.
25 Problem Possible Cause Solution V ehicle does not run Undercharged battery Charge the battery . A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
26 V ehicle was running but Loose wire or loose connectors Check all wires and connectors. Make sure the motor suddenly stopped harness connector is tightly plugged into the battery , and that there are no loose wires around the motors. T ripped thermal fuse Each Power Wheels ® 12 volt battery has a built-in thermal fuse.
27 V ehicle runs sluggishly (cont.) Battery needs charging Be sure to charge the battery after each use. Battery is old and will not accept Even with proper care, a rechargeable battery does not accept full charge last forever . A verage battery life is 1 to 3 years depending on vehicle use and use conditions.
PRINTED IN MEXICO H0150pr-0920 If you are missing parts or need assistance, please call us toll-free: P ower Wheels ® Consumer Relations 1-800-348-0751 8 AM - 6 PM EST , Monda y through Frida y . Over 400 A uthorized Ser vice Center s! Visit us on-line at www .
デバイスFisher-Price H0150の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fisher-Price H0150をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFisher-Price H0150の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fisher-Price H0150の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fisher-Price H0150で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fisher-Price H0150を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFisher-Price H0150の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fisher-Price H0150に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFisher-Price H0150デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。