Fisher-PriceメーカーM3865の使用説明書/サービス説明書
ページ先へ移動 of 32
Owner's Manual Owner's Manual with Assembly Instructions with Assembly Instructions For Model M3865 For Model M3865 Owner's Manual with Assembly Instructions For Model M3865 Product features may vary from the picture above. Please read this manual and save it with your original sales receipt.
2 TABLE OF CONTENTS A M3865pr-0920 • Y our new vehicle requires adult assembly . Please set aside at least 45 minutes for assembly . • Y ou must charge your battery for 18 - 30 hours before you use your vehicle for the first time . We recommend that you start charging your battery before beginning assembly .
M3865pr-0920 • In the unassembled state, this package contains small parts. Adult assembly is required. • Use the charger in dry locations only. • Prevent Injuries and Deaths • Direct Adult Supervision Required. • Never Ride At Night. • Keep Children Within Safe Riding Areas.
M3865pr-0920 4 PA R T S • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
5 TABLE OF CONTENTS A M3865pr-0920 5 PA R T S M3865pr-0920 Not Shown: Label Sheet 6 V olt T ype H Charger 6 V olt T ype H Battery ® Rear Axle Steering Column Steering LInkage Cover (taped under vehic.
M3865pr-0920 6 PA R T S M3865pr-0920 Lock W asher - 4 .437 (Large) White Cap Nut – 2 #8 x 3 / 4 " Screw - 13 (Small Diameter Head) #10 x 3 / 4 " T russhead Screw (Large Diameter Head) 1 / 4 " x 1 1 / 4 " Screw - 2 #6 x 1" Screw - 2 5 / 16 " Large W asher - 5 #10 Lock Nut ¼" Small W asher - 2 .
7 TABLE OF CONTENTS A M3865pr-0920 Right Rear Wheel Assembly 7 P ARTS PICTURE M3865pr-0920 T M ® 1 V ehicle 2 Seat 3 Door 4 Wheel - 4 5 Rear Axle 6 Windshield 7 Driver 8 Front Axle - 2 9 Steering Lin.
8 TABLE OF CONTENTS A M3865pr-0920 8 Important Notes • Y our new battery must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle.
M3865pr-0920 9 M3865pr-0920 BA TTER Y CHARGING IMPORT ANT! The battery must be removed from your vehicle for the initial charge in order to complete assembly . After assembly is complete, you do not need to remove the battery from your vehicle to recharge it.
REAR VIEW 1 Children can be harmed by small parts, sharp edges and sharp points in the vehicle's unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
11 ASSEMBL Y M3865pr-0920 3 2 • Fit a round bushing, barrel side first, into the hole inside the battery compartment. • Position the gearbox with the teeth outward.
12 ASSEMBL Y M3865pr-0920 • Fit a round bushing, barrel side first, into the hole in the inside of a wheel (ribbed side) . • Repeat this procedure to insert a round bushing into the inside of another wheel. • Identify the inside and the outside of a wheel.
11 13 ASSEMBL Y M3865pr-0920 • T urn the vehicle on its side. • Fit a lock washer , rounded side up, into the assembly tool. Make sure it fits completely inside the assembly tool. • Fit the assembly tool (with lock washer in it) onto the end of the rear axle.
15 14 ASSEMBL Y M3865pr-0920 12 14 TM • Fit the door peg into the hole in the top of the vehicle. Hole • Insert eight #8 x 3 / 4 " screws into the door . • Tighten the screws. Door 13 Door Peg • T urn the windshield face down on a flat surface.
15 ASSEMBL Y M3865pr-0920 19 16 • Position the windshield upright, as shown. • Remove the backing and position label #2 7 on the right side of the windshield, as shown. Hint: Align the dotted line on the label with the back edge of the windshield.
23 21 20 22 16 ASSEMBL Y M3865pr-0920 • Slide a 5 / 16 " large washer onto the short end of each front axle. • Position the steering linkage cover over the steering linkage. Make sure the A and B markings in the steering linkage cover match the A and B markings in the steering linkage.
17 ASSEMBL Y M3865pr-0920 24 26 • Fit a 5 / 16 " large washer onto each front axle. Large W asher Front Axle • Identify the inside and the outside of a wheel. • The inside of the wheel has ribs on its surface. The outside of the wheel has a smooth surface.
30 31 18 ASSEMBL Y M3865pr-0920 29 • Fit the notches on the inside of a front wheel traction band to the ridges on a front wheel, as shown. Hint: Soak the traction band in hot water for about two minutes to soften it.
34 33 32 19 ASSEMBL Y M3865pr-0920 • Cut the steering wheel labels (#29, #30 and #31) from the larger label sheet. Now , position the steering wheel labels, as shown in the illustration, around the steering wheel. Hint: These labels will be applied around the spokes on the steering wheel.
37 36 20 ASSEMBL Y M3865pr-0920 • T urn the vehicle on its side, so that the bottom faces you. • Position the steering bracket behind the steering linkage, as shown. • Fit the steering column through the hole in the steering bracket to the second bend.
41 REAR VIEW 21 ASSEMBL Y M3865pr-0920 • Insert the seat front tabs into the slots inside the vehicle. • Then, insert the lock fastener tabs on the back of the seat into the slots in the vehicle. • Using a slotted screwdriver , turn each lock fastener 1 / 4 turn to the locked position.
DECORA TION 22 J4030pr-0920 M3865pr-0920 T M LEFT SIDE VIEW 4 2 3 8 25 19 16 18 33 10 12 6 23 RIGHT SIDE VIEW 1 7 24 20 23 9 22 17 15 11.
M3865pr-0920 ® 3 4 1 23 M3865pr-0920 BA TTER Y INST ALLA TION 2 • Locate the lock fasteners in the back end of the seat. • Using a slotted screwdriver , turn the lock fasteners 1 / 4 turn to the unlocked position . Unlocked Lock Fasteners Seat • Lift the seat to remove it from the vehicle.
6 5 24 BA TTER Y INST ALLA TION J4030pr-0920 24 M3865pr-0920 ® • Plug the battery connector into the motor harness connector . Note: If the battery connector will not plug into the motor harness connector , turn it over and try again! Do not force the battery connector into the motor harness connector .
• Y our Power Wheels ® battery is a non-spillable sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner . • Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. • Do not dispose of a lead-acid battery in your regular , household trash.
T each Safety Rules to Children While children can quickly develop the skill necessary to drive this vehicle, it is important to remember that their judgment skills are still very immature. Unsupervised driving by children can lead to serious injury .
IMPORT ANT! Use this vehicle ONL Y outdoors. Most interior floor- ing can be damaged by riding this vehicle indoors. Fisher-Price ® will not be responsible for damage to the floor if the vehicle is used indoors.
Bumper-to-Bumper* Limited W arranty *One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 6 volt battery .
PROBLEMS AND SOLUTIONS GUIDE PROBLEM POSSIBLE CAUSE SOLUTION Vehicle does not run Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
PROBLEMS AND SOLUTIONS GUIDE Vehicle was running but Loose wires or loose connectors Check all wires and connectors. Make sure the battery suddenly stopped connector is tightly plugged into the motor connector, and that there are no loose wires around the motors.
Vehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 14 hours after each use.
Trademarks, design patents and copyrights are used with the approval of the owner VOLKSW AGEN AG. Fisher-Price, Power Wheels, and Power Lock are U.S. trademarks of Mattel, Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New Y ork 14052 U.
デバイスFisher-Price M3865の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fisher-Price M3865をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFisher-Price M3865の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fisher-Price M3865の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fisher-Price M3865で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fisher-Price M3865を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFisher-Price M3865の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fisher-Price M3865に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFisher-Price M3865デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
