Fly-LinkメーカーFL-MR4420NDの使用説明書/サービス説明書
ページ先へ移動 of 109
.
Copyright Statement is the registered trademark. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holder s. All the ph otos an d prod uct sp ecifica tions mentioned in this ma nual ar e for refe rences o nly .
CONTENTS Chapter 1 Introduction ............................ 1 1.1 Product Fe atures .............................. 2 1.2 Package Co ntents ............................ 4 1.3 LED Indicator and P ort Description ..... 4 Chapter 2 Hardware Installation .
7.1 Basic Settings .................................. 41 7.2 Wireless Security Setting ................... 44 7.3 Advanced Settings ............................ 52 7.4 WPS Settings ................................... 53 7.5 WDS Settings ..............
12.2 URL Filter Settings .......................... 76 12.3 MAC Address Filter .......................... 78 12.4 Prevent Network Attack ................... 79 12.5 Remote W eb Management ................ 80 12.6 Local W eb Management ................
3G 300Mbps Wireless Router 1 Chapter 1 Introduction Thank you for purchasing Fly-link FL -MR4420ND 300Mbps Wireless Router! FL -MR4 420ND is a hi gh speed 3G 300Mbps Wi reless Router , which complies with the l atest IEEE802.
3G 300Mbps Wireless Router 2 through some access restricted area to share the Interne t with multip le computers e asily . Besides those access ways, WDS (Wireless Distribution System) enables you to bridge other wireless routers and extend wireless coverage area.
3G 300Mbps Wireless Router 3 Ethernet W AN port ¾ Provides four 10/100Mbps Auto-Negoti ation Ethernet LAN ports ¾ Provides one USB 2.0 port for 3G modem card connection ¾ Supports xDSL/Cable MODEM,.
3G 300Mbps Wireless Router ¾ Supports URL Monitor ¾ Supports QoS function 1.2 Package Co ntents Please unpack the box and check the following it ems: ¾ One FL -MR44 20ND 300Mbps Wirel ess Router ¾.
3G 300Mbps Wireless Router 5 LED indicator description on front panel: (from R to L) ¾ POWER When turns green, Always ON indicates the power connects well. ¾ WPS When b linking, it ind icates the de vice is negotia ting with client in WPS mode. ¾ SYS When turns green, blinking indi cates the system runs well.
3G 300Mbps Wireless Router Back P anel Show ： Rea r Pa n e l From L to R ：（ ） ¾ POWER The port is for power adapter connection. Please use the included DC 12V 1.
3G 300Mbps Wireless Router 7 It is always connected with DSL Modem, Cable Modem, or direct Internet line provided by ISP to access the Internet. ¾ LAN (1, 2, 3, 4) 4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.
3G 300Mbps Wireless Router Chapter 2 Hardware Installation 2.1 How to Install the R outer After you unpack the box, please follow the steps below to connect the device. For better wireless performance, please put the device i n the middle of wirel ess coverage area.
3G 300Mbps Wireless Router 3. Connection between the Router and Network A. If you have a 3G USB modem card, please connect it to the R outer's USB port to share 3G network. B. If you are provided the wired broadband by your ISP to access the Internet, please connect the Router's W A N port with the Internet access line.
3G 300Mbps Wireless Router 4. Please insert the included CD-ROM into the CD-ROM drive. Y ou can run the “Setup Wizard” automatically or click the “Setup” button manually and then follow the instructions to finish installation or enter the Router’s W eb-based util ity to set the device.
3G 300Mbps Wireless Router 1. Application Plan for 3G Network Connection 2. Application Plan for Wired Broadband Connection 3. Application Plan for Wireless Broadband Connection 11.
3G 300Mbps Wireless Router Chapter 3 How to Login to the Router The chapter mainly presents how to enter the R outer’s W eb page. After you have fini shed the hardware installa tion ( Please refer to chap ter2.) , the fol lowing steps will assist you to set the network configurations for you computer .
3G 300Mbps Wireless Router 2. Right click “Local Area Network Connection” and select “Properties” . 3 Select “Internet Protocol (TCP/IP)” and click “Properties” .
3G 300Mbps Wireless Router Select “Obtain an IP address automaticall y” or select “Use the following IP address (S)” . 4 ． A. “Obtain an IP address automatically” as the following diagram: B. “Use the following IP address (S )” IP Address: 192.
3G 300Mbps Wireless Router Tip: If you are not sure of the DNS server address, we recommend you to select “Obtain an IP address automatically (O)” and “Obtain a DNS server address automatically” .
3G 300Mbps Wireless Router 3. If you enter the correct user name and passwor d, the screen will be the next one. 16.
3G 300Mbps Wireless Router Chapter 4 WAN Medium Type 4.1 WAN Medium Type The R outer provides three access medium types. If you are provided the 3G broadband by your IS P to access the Internet, you can connect the 3G USB modem card to the R outer’s USB port and select 3G W AN to set the device.
3G 300Mbps Wireless Router 18 port on the Router’ s rear panel . The default type is wired W AN. ¾ Wireless WAN: If you are provided the wirel ess WAN to access the Internet or you want to amplify the wireless signals, you can use this type.
3G 300Mbps Wireless Router 19 Chapter 5 Quick Setup Guide This chapter deals with how to access the Internet quickly . After you enter the Router’ s We b-based interface from the Internet Explorer , please select the access medi um type provided by your ISP in “WAN Medium” .
3G 300Mbps Wireless Router During the installation, please select the type of 3G modem card and enter the basic parameters provided by your 3G ISP . Generally speaking, “ Access Point Name” and “Dial” are the necessary settings, but some other modem cards need to set “PIN Code” or “User name/ Password” .
3G 300Mbps Wireless Router 3G USB Modem card in the compatible products list to download the corresponding upgrading firmware. If you still can’t access the Internet, please contact the 3G modem card reseller and provide the Model No. of the 3G modem card you have, we’ll try our best to help you to solve the problem.
3G 300Mbps Wireless Router The screen will show as the diagram below. The R outer supports multiple access ways such as ADSL PPPOE Dial, Dynamic IP , static IP , etc. In this chapter , we introduce you three common access way settings. If you are not sure of your access way , you can enable the auto-detect function to select your access way .
3G 300Mbps Wireless Router ¾ Dynamic IP (via DHCP) If your connection mode is Dynam ic IP , it means your IP address keeps changing every time you connect. Y ou do not need to enter the information like other modes. Click “Next” and “ Apply” to finish the settings.
3G 300Mbps Wireless Router follows ： IP Address 192.168.1.2 ： 255.255.255. 0 Subnet Mask ： 192.168.1.1 Gateway ： 192.168.1.2 Primary DNS Se rver ： 202.96.134.133 Alternate DNS Serv er ： Click “ Apply” to complete the setup wi zard. The Router will record the settings you made.
3G 300Mbps Wireless Router between the Router and ISP device. If the status information of the W AN port appears as the diagram show , i t means you have finished the R outer ’ s basi c settings and you can surf on line now . If you want to configure more, please refer to the following chapters.
3G 300Mbps Wireless Router Please enter the wireless SSID, MAC address, channel, security mode parameters provided by your Wi-Fi ISP . If you are not clear , pl ease click” Auto Scan” to finish the settings. Select and save the settings, and you will enter the Router’ s Web interface again after rebooting the R outer .
3G 300Mbps Wireless Router are not sure of your ISP access way , you can enable the auto-detect function to select your access way . ¾ ADS L Virtual Dial-up (via PPPoE) This way is used when the Router is connected to the wireless modem or you want to amp lify wireless signals and share the Internet with multiple computers.
3G 300Mbps Wireless Router ¾ Dynamic IP (via DHCP) If you are provided the Dynamic IP connection mode by your ISP or you want to amplify wireless signals, please select “Obtain the IP address auto matically” . Click “Next” and “Save” to fin ish settings.
3G 300Mbps Wireless Router 29 attention to the IP address the previous router distributed. If the IP address belongs to the range: 192.168.0.x, you need to change the LA N IP address to different range such as 192.168.2.1. Only this way, you can amplify the wireless signals and access the Internet.
3G 300Mbps Wireless Router Click “Save” to complete the setup wizard. The Router will record the settings you made. T o activate the settings, it is recommended to select “Reboot the R outer” from “System T ool” of the left menu. It is rebooting now, please wait for a few minutes and DO NOT power off it.
3G 300Mbps Wireless Router configure more, please refer to the following chapters. Notice: The difference between wired WAN and wireless WAN is the connection medium type. Generally speaking, the standard twisted-pair is used to connect the Router’s WAN port in wired WAN connection type.
3G 300Mbps Wireless Router 32 computer with a 3G modem card to access the Internet. If the signals are OK and the speed is fast at the place, you can connect the wireless Router here to share 3G connection and access the Internet. 2 ． Confirm Wi-Fi signals.
3G 300Mbps Wireless Router Chapter 6 Advanced Settings 6.1 LAN Settings LAN Settings are for the basic TCP/IP parameters of LAN ports. ¾ MAC Address: The R out er’s physical MAC address as seen on your local network is unchangeable. ¾ IP Address: The R oute r’s LAN IP addresses (not your PC’ s IP addre ss).
3G 300Mbps Wireless Router 6.2 WAN Settings After you have selected the ISP connection type in “Setup Wizard” and you want to mo di fy the related settings, here you can modify and configure the settings in deta ils. Virtual Dial-up PPPoE （ ） ¾ WAN Connection Mode: Show your current connection mode.
3G 300Mbps Wireless Router 35 applica tion softwar e can not be open or e nabled , you can hav e a try to change the MTU value as 1450, 1400, etc. ¾ Service Name: It is defined as a set of characteristics that are applied to a PPPoE connect ion. Enter it if p rovided.
3G 300Mbps Wireless Router Static IP If your connection mode, static IP is chosen, you can modify the following addre ssing information. ¾ IP Address: Here enter the W A N IP address provided by your ISP . ¾ Subnet Mask: Enter the W A N Subnet Mask here.
3G 300Mbps Wireless Router 3G Broadband: Network settings ¾ 3G modem card type: choose the Model No. of your 3G USB modem card. ¾ Authentication method: 3G access way authentication methods include SIM card type and Username/Password type. ¾ PIN code: SIM card personal identification code.
3G 300Mbps Wireless Router 38 ¾ Access Point Name: Enter them provided by your ISP . Advanced PPP Settings ¾ User Name: PPP Authentication User Name. Some ISP need to enter this value. ¾ Password: PPP Authentication Password. Some ISPs need to enter this value.
3G 300Mbps Wireless Router 6.3 MAC Address Clone This page is for the Router’ s MAC address to WAN. Some ISPs require end-user's MAC address to access their network. This feature copies the MAC address of your network device to the Router . ¾ MAC Address: The MAC address to be registered with your Internet service provider .
3G 300Mbps Wireless Router ¾ DNS: Click the checkbox to enable the DNS server . The Router’ s DHCP sever will answer the client’s requests and distribute DNS address. ¾ Primary DNS Address: Enter the necessary address provided by your ISP . ¾ Secondary DNS Address: Enter the second address if your ISP pr ovide s, which is optional.
3G 300Mbps Wireless Router Chapter 7 Wireless Setting 7.1 Basic Settings ¾ Enable Wireless: Check to enable the R outer ’s wireless features; uncheck to disable it. ¾ Network Mode ： Select one mode from the following. The default i s 11b/g/n mode.
3G 300Mbps Wireless Router 42 11b mode ： Allow the wireless client to connect w i t h t h e d e v i c e i n 1 1 b m o d e a t t h e maximum speed of 11Mbps. 11g mode ： Allow the 11g/1 1n-compliant client device to connect with the AP at the maximum speed of 54Mbps.
3G 300Mbps Wireless Router 43 via wireless adapter , and configure PC1 and PC2 in the same segment. After the feature i s enabled, two PCs can not communicate and share network resource each other , but they can communicate with wireless clients connected with AP2.
3G 300Mbps Wireless Router 44 ¾ Standard Channel ： Specify the effective channel (from 1 to 13Auto) of the wireless network. ¾ Extension Channel ： T o increase data throughput of wireless network, the extension channel range is used in 11n mode.
3G 300Mbps Wireless Router ¾ WPA Algorithms ： Provides TKIP [T emporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. ¾ Pass Phrase : Enter the encrypted characters wi th 8-63 ASCII characters. ¾ Key Renewal Interval ： Set the key’s renewal period.
3G 300Mbps Wireless Router ¾ WPA Algorithms ： Provides TKIP [T emporal Key Integrity Protocol], AES [Advanced Encryption Standard] or TKIP&AES mixed mode. ¾ Pass Phrase ： Enter the encrypted characters with 8-63 ASCII characters. ¾ Key Renewal Interval ： Set the key’s renewal period.
3G 300Mbps Wireless Router ¾ Select SSID ： Se lec t th e SSI D (m ain SSID or minor SSID) to configure security setting from the drop-down menu. ¾ Security Mode ： From the drop-down menu select the corresponding security encryption modes. ¾ WEP Key ： Set the WEP key with the format of ASCII and Hex.
3G 300Mbps Wireless Router 7.2.4 WPA- Enterprise T h i s s e c u r i t y m o d e i s u s e d w h e n a R A D I U S s e r v e r i s connected to the device. Select “WPA -Enterprise” from the drop-down menu to enter the following window: ¾ WPA Algorithms ： Provides TKIP [T emporal Key Integrity Protocol] or AES [Advanced Encryption Standard].
3G 300Mbps Wireless Router ¾ Session Timeout ： The authenticati on interval period between the Router and authentication server . 7.2.5 WPA2-Enterprise This security mode is bas ed on Radius authentication server and WPA2 encryption method. WP A2 is used when a RADIUS server is connected to the device.
3G 300Mbps Wireless Router 50 period. ¾ Radius Server Address ： Enter the IP address of the Radius server . ¾ Radius Server port ： Enter the authentication port of the Radius server . The default is 1812. ¾ Shared Key ： Enter the shared key for authentication server wi th 8~63 AS CII characters.
3G 300Mbps Wireless Router ¾ WEP ： Click “Enable/Disa ble” to enable o r disable the WEP algorithm. ¾ Radius Server Address ： Enter the IP address of the Radius server . ¾ Radius Server Port ： Enter the authentication port of the Radius server .
3G 300Mbps Wireless Router (Disable), WPA-Personal -AES, PA2-Personal-AES. Other encryption methods are nonstandard. There may be compatib ility problems among different manufacturers.
3G 300Mbps Wireless Router 53 wireless radio. Default value is 100. It is recommended not to modify this value. ¾ Fragment Threshold: The fr agmentation threshold defines the maximum transmission packet size in bytes. The packet will be fragmented if the arrival is bigger than the threshold setting.
3G 300Mbps Wireless Router method and secret keys by manual. In the “Wireless settings” menu, click “WPS settings” to enter the next screen. ¾ WPS settings ： T o enable or disable WPS function. The de fault is “dis able” . ¾ WPS mode ： Provide two ways: PBC (Push-Button Configuration) and PIN code.
3G 300Mbps Wireless Router 55 means the WPS connection is completed. If more clients are added, repeat the above steps. At present, the WPS supports up to 32 clients access.) ¾ PIN ： I f t h i s o p t i o n i s e n a b l e d , y o u n e e d t o e n t e r a wireless client’s PIN code in the field and keep the same code in the WPS client.
3G 300Mbps Wireless Router be turned off . AP will not respond the WPS cli ent’ s requests and the set the security mode as WP A mode. 7.5 WDS Settings WDS (Wireless Distributi on System) is used to expand wireles s cover age area. Th is R outer prov ides th ree modes: Lazy , Bridge and Repeater .
3G 300Mbps Wireless Router or scanner to enlarge and extend the wireless radio. Encrypt Type: Select one from WEP , TKIP , AES for security here. Pass phrase: Enter the encrypted key for wireless devices. AP MAC Address: Input the MAC address of anot her (opposing) wireless router you want to connect.
3G 300Mbps Wireless Router address filter . Select “off ” to malfunction MAC address; “disable” to prevent the MAC addresses i n the list from accessing the wireless network; “ Allow” to allow the MAC addr ess in the li st to access the wireless network.
3G 300Mbps Wireless Router Chapter 8: DHCP Server 8.1 DHCP Settings DHCP (Dynamic Host Control Protocol) is to assign an IP address to the computers on the LAN/private network.
3G 300Mbps Wireless Router 8.2 DHCP List and Binding The Sta tic IP assignment is t o add a s pecific ally s tatic I P address to the assigned MAC address. Y ou can view the related informat ion in the DHCP server lis t. ¾ IP Address: Enter the IP address which needs to be bound.
3G 300Mbps Wireless Router Chapter 9 Virtual Server 9.1 Single Port F orwarding The R outer can be configured as a virtual server on behalf o f local serv ices behind the LAN port. The g iven remote requests will be re-directed to the l ocal servers via the virtual server .
3G 300Mbps Wireless Router 62 ¾ Internal Port: Th is is t he port num ber o f LAN computer set by the Router . The Internet traffic from the external port will forward to the internal port. F or example ： you can set the internal port NO.66 to act as the external port NO.
3G 300Mbps Wireless Router NOTE: If you set the vi rtua l server of the service port as 80, you must set the Web management port on Remote Web Management page to be any value except 80 such as 8080. Otherwise, there will be a conflict to disable the vir tual server.
3G 300Mbps Wireless Router 64 which ranges the External ports used to set the serve r or Inte rnet ap plications . ¾ IP Address: Enter the IP address of the PC where you want to set the applications. ¾ Protocol: Select the protocol (TCP/UDP/Both) for the ap plication.
3G 300Mbps Wireless Router 9.3 ALG Service Settin gs In the context of computer networking, an ALG or applica tion laye r gatew ay consists of a security component that augments a firewall or NA T employed in a computer network.
3G 300Mbps Wireless Router 66 Usually allowing client applications to use dynamic ephemeral TCP/ UDP ports to communicate with the known ports used by the server applications, even though a firewall-configuration may allow only a limited number of known ports.
3G 300Mbps Wireless Router ¾ DMZ Host IP Address: The IP address of the computer you want to expose. ¾ Enable: Cli ck the checkbox to enable the DMZ host. For example: Set the computer at the IP address of 192.168.0.10 i n LAN as a DMZ Host to intercommunicate with another host on the Internet.
3G 300Mbps Wireless Router ¾ Enable UPnP: Click the checkbox to enable the UPnP . 68.
3G 300Mbps Wireless Router Chapter 10 Traffic Control 10.1 T raffic Control T raffic control is used to limit communication speed in the LAN and WAN. Up to 20 entries can be supported with the capability for at most 254 PCs' speed cont rol, including for IP address range configuration.
3G 300Mbps Wireless Router ¾ IP Starting Address: The first IP address for traffic control. ¾ IP Ending Address: The last IP address for traffic control. ¾ Uploading/Downloading: T o specify the traffic heading way for the selected IP addresses: upload ing or download ing.
3G 300Mbps Wireless Router 71 ¾ Enable traffic statistics: check to enable traffic statistics. Usually traffic statistics is disabl ed, which can improve the R o uter’s data handling. The default is disabled. If it is enabled, t he page will update the PC’s traffic information automatically and be refreshed every 5 seconds.
3G 300Mbps Wireless Router Chapter 11 URL Monitor 11.1 URL Monitor This feature is used to record user ’ s Int ernet activity , so in terms of this feature, the administrator can check out and control what they can do and have done.
3G 300Mbps Wireless Router 73 disabled. ¾ Enable Email: T o enable this feature, the URL records will be sent to specified e-mail, which can be solved the problem that the records will be lost when it is over 500 entries. ¾ Receive E-mail Address: Input the received E-mail’s address here.
3G 300Mbps Wireless Router 74 ¾ Entry Triggering Interval: T o set sending e-mail’s entry interv al. The entry ranges from 100 to 500. For example: If you input 100 here, it means the Router will send an email from “Send Email Address” to “Receive Email Address” every 100 entries.
3G 300Mbps Wireless Router Chapter 12: Security Settings 12.1 Client Filter Settings T o benefi t your further management to the computers in the LAN, you can control some ports access to Internet by data packet filter function. ¾ Client Filter: Check to enable client filter .
3G 300Mbps Wireless Router 76 ¾ Policy Name: Enter a name for the access policy selected. ¾ IP Start/End: Enter the starting/ending IP address. ¾ Port No.: Enter the port range based over the protocol for access policy . ¾ Protocol: Select one protocol (TCP/UDP/Both) from the drop-down menu.
3G 300Mbps Wireless Router ¾ URL Filter: Check to enable URL filter . ¾ Access Policy: Select one number from the drop-down menu. ¾ Enable: Check to enable the access policy . ¾ Clear the Policy: Click “Clea r” button to clear al l settings for the policy .
3G 300Mbps Wireless Router ¾ Days: Select the day(s) to run the access policy . ¾ Save: Select Save to enable the settings. For example: If you want the computer at the IP address of 192.
3G 300Mbps Wireless Router 79 ¾ MAC Address Filter: Check to enable MAC address filter . ¾ Access Policy: Select one number from the drop-down menu. ¾ Enable: Check to enable the access policy . ¾ Clear the Policy: Click “Clea r” button to clear al l settings for the policy .
3G 300Mbps Wireless Router ¾ Prevent Network Attack: Check to enable it for attack prevention. 12.5 Remote W eb Management This se ction is to a llow the network adminis tra tor to manage the R outer remotely . If you want to access the R outer from outside the local network, please sel ect the “Enable” .
3G 300Mbps Wireless Router 81 Note ： 1. If you want to login the device’s Web-based interface via port 8080, you need use the format of WAN IP address: port (for example http://219.134.32.101: 8080 ) to implement remote login. 2. If your WAN IP address starts and ends with 0.
3G 300Mbps Wireless Router ¾ Enable: Check to enable the local web management. ¾ MAC Address: Enter the MAC addresses of LAN computers. 1. In the default state, this feature is not enable d. All co mputer s in the L AN can log in the W eb. Note ： 2.
3G 300Mbps Wireless Router Chapter 13 Routing Setting 13.1 Routing T able The main duty for a rout er is to look for a best path for every data frame, and tr ansf er thi s data frame to a destin ation. So , it’ s essential for the router to cho ose the best path, i.
3G 300Mbps Wireless Router 84 Destinat ion LAN IP . ¾ Gateway: The gateway of the next hop, usually the R outer or host’s IP address. Note ： 1. The gateway must keep the same segment wi th the Ro u t er ’s L A N I P a d d r e s s . 2. If the destination IP address is one host ’ s I P address, the Subnet mask should be 255.
3G 300Mbps Wireless Router Chapter 14 System Tools 14.1 Time Settings This section is to select the time zone for your location. If you turn off the R outer , the settings for time di sappear . However , the R outer wi ll automatically obtain the GMT time again once it has access to the Internet.
3G 300Mbps Wireless Router 14.2 DDNS The DDNS (Dynamic Domain Name S ystem) is supported in this Router . It i s to assign a fixed host and domain name to a dynamic Internet IP addres s, which is used to monitor hosting website, FTP server and so on behind the Router .
3G 300Mbps Wireless Router 87 menu and press “Sign up” for registration. ¾ User Name: Enter the user name the same as the registration name. ¾ Password: Enter the password you set. ¾ Domain Name: Enter th e domain na me which is optional. For example ： In the local host 192.
3G 300Mbps Wireless Router 14.3 Backup/Restore Settings The device provides backup/restore settings, so you need set a directory to keep these parameters. ¾ Backup Setting ： Click “Backup” button to back up the Router’ s settings and select the path for save.
3G 300Mbps Wireless Router ¾ Restore Setting ： Click “Browse” button to select the backup files. Click “Restore” button to r estore previous settings.
3G 300Mbps Wireless Router 14.4 Restore to F actory Default Setting This button is to reset all settings to the default values. It means the Router will lose all the settings you have set. So please Note down the related settings if necessary . ¾ Restore: Click this button to restore to default settings.
3G 300Mbps Wireless Router 14.5 Upgrade Firmw are The Router provides the firm ware upgr ade by clic king the “Upgrade” after browsing the firmware upgrade packet which you can download from www .fly-link.net. ¾ Browse: click this button to select the upgrade file.
3G 300Mbps Wireless Router 14.7 Password Change This section is to set a new user name and password to better secure your router and network. ¾ User Name: Enter a new user name for the device. ¾ Old Password: Enter the old password. ¾ New Password: Enter a new password.
3G 300Mbps Wireless Router 14.8 System Log The section is to view the system log. Click the “R efresh” to update the log. Click “Clear” to clear all shown information. If the log is over 150 records, it will clear them automatically . ¾ Refresh: Click this button to update the log.
3G 300Mbps Wireless Router 94 Appendix Ⅰ： Glossary 3G 3G, the 3rd Generation, refers to the third digital communication technology . It can manage multi-media such as image, audio, and video stre ams etc. and provide different communication services such as web browse, telephone session, and electronic busi ness etc.
3G 300Mbps Wireless Router 95 Channel An instance of medium use for the purpose of pa ssing protocol data units (PDUs) that may be used simultane ously , in the same v olume of space, wit h other inst.
3G 300Mbps Wireless Router 96 data. Therefore, all devices on a wireless network must use the same key and same type of encryption. There are 2 methods for entering the KEY ; one is to enter a 16-bit HEX digit. Using this method, users must enter a 10-digit number (for 64-bit ) or 26-digit number (for 128-bit) in the KEY fiel d.
3G 300Mbps Wireless Router 97 802.1x Authentication Static WEP key is difficul t to manage. When you change the key , you need to in form everyone. Once the key is disclosed, there is no security . In additi on, since static WEP encryption has serious security holes, the WEP key can be decrypted by receiving multiple data.
3G 300Mbps Wireless Router 98 Appendix Ⅱ : Troubleshooting In this part some questions and problems shown during the Router’ s usage and install ation will be given suggesting answers. If your problems are not in the list, please lo g into o ur websit e www .
3G 300Mbps Wireless Router 99 2. Forget the login password and can not enter the setting page. What can I do? Press the “RESET” button for 7 seconds to restore the R outer to default settings. 3. The computer connected with the Router shows IP address conflict.
3G 300Mbps Wireless Router 100 address to the bind21i ng PC’ s MA C address. Select “MAC Address Clone” in “ Advanced Setting” to input your computer’s MAC address and click “ Appl y” to activate it.
3G 300Mbps Wireless Router 101 applic ation and se rvice port: Server Protocol Service P ort WEB Server TCP 80 FTP Server TCP 21 T el net TCP 23 NetMeeting TCP 1503 、 1720 MSN Messenger TCP / U D P File Send:6891-6900(TCP) V oice:1863 、 6901(TCP) V oice:1863 、 5190(UD P) PPTP VPN TCP 1723 Iphone5.
3G 300Mbps Wireless Router 102 is compatible with the Router . Y ou can search the related model No. on the compat ible prod uct list. d. Please make sure that the 3G modem card model selected in the 3G W eb interface matches the practical product and the settings you entered match the parameters by your ISP .
3G 300Mbps Wireless Router 103 d. Please do not detach any antenna of the wireless Router when you are us ing the Router . After trying all the above steps, if you still can’ t access the Internet, you can contact us for support. 9 ． Why do the charges increase after using a 3G Modem Card? a.
EU Declaration or Declaration of Conformity H e r e b y , F L Y - L N K , d e c l a r e s t h a t t h i s 3 G 1 1 N W i r e l e s s R outer is in co mpliance with t he ess ential re quirements and other relevant provisions of Directive 1999/5/EC. www.
デバイスFly-Link FL-MR4420NDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fly-Link FL-MR4420NDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFly-Link FL-MR4420NDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fly-Link FL-MR4420NDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fly-Link FL-MR4420NDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fly-Link FL-MR4420NDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFly-Link FL-MR4420NDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fly-Link FL-MR4420NDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFly-Link FL-MR4420NDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
