FortecメーカーFS-4000v2の使用説明書/サービス説明書
ページ先へ移動 of 32
OK LIS T PR + PR.
GENERAL INFORMA TION INSTALLATION MENU INFORMA TION 1 6 7 Main Features For your Safety Unpacking General Operation RCU Front Panel Rear Panel 1 2 3 3 4 5 5 Main Menu 1. Channel List 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete All 2. Installation 2.
4. T ools 4.1 Information 4.2 Factory Setting 4.3 SatcoDx Auto Programing 5. Game 6. Hot key 6.1 Info 6.2 EPG 6.3 Find 6.4 Numer 6.5 TV/Radio 6.6 Up/Down 6.
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features.
For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth.
General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.
RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or sele.
Front Panel Front Panel Rear Panel Rear Panel The picture is only for reference,please make the object as the standard. CONNECT VIDEO TO TV USING RCA JACK CONNECT TO A DIGITAL AMPLIFIER CONNECT TO A P.
The picture is only for reference,please make the object as the standard. Connecting to TV using RCA support L R IN VIDEO TV AUDIO DSR Satellite Dish Connecting to Digital Amplifier Satellite Dish DIG.
Main Menu This menu consists of 5 major main menus as follow. - Edit Channel - Installation - System Setup - T ools - Game During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has mark. Y ou can also use the numeric keys on the RCU to enter numeric value.
If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey . 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted.
3. Press FAV key to move the FA V button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program.
6. Press yellow colour key to move the Move button upward. Select the program and press OK key to mark this program with the move mark. Press PR+, PR- keys to move the cursor to the position where you want to locate and press OK key to confirm.
Press green colour key to move the Edit button upward. Select the program and press OK key to pop up the Rename window. In Rename window, press red colour key to switch between capital letter and lowe.
In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?".
2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down.
3. Press red colour key to pop up the Edit Satellite window. Press PR+, PR- keys to move cursor up or down. Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name. Longitude: Y ou can press keys to switch between east longitude and west longitude.
Suppose that you have selected Fixed Antenna in the Antenna Connection window. 1. Satellite: All selected satellites in the satellite list are displayed in this item. Press keys to select the satellite in circle. Or press OK key to pop up the drop- down list, then select the desired satellite in the list and press OK key to confirm.
4. Motor Setting: Press OK key to the Motor Setting window. Satellite: Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. Transponder: The same operation as the above.
6. If select USALS, Delete All item will turn grey. Local Longitude, Local Latitude: Press keys to switch between West and East, or press keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit.
2.5 Multi Satellite Search 4. Network Search: Select between No and Yes. This item turns grey when Auto Scan is selected in the following Scan mode item. 5. Scan Mode: Press keys to select between Auto Scan and Preset Scan. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.
2. Press red colour key to pop up the Edit TP window. Frequency, Symbol rate: Press keys to add or reduce by step one. Or press numeric keys (0-9) to input the desired value. The range of the frequency is 3000- 13450, while the range of the symbol rate is 1000~45000.
1. Press OK key to enter into the Language window. Press keys to select the language in circle, while press PR+, PR- keys to move the cursor up or down in circle. 2. Press MENU key or EXIT key to save and exit. 3. The types of the language, pleaser refer to the configuration of the customer.
1. Summer T ime: Select between ON and OFF. "OFF" delegates the normal time. If select ON, time will add one hour. 2. GMT Offset: When select "ON" in GMT Usage item, system will get the date and time information from the screen automatically .
Before entering into the Parental Lock window, you need input the correct password. The default password is 0000. 1. Menu Lock: Press keys to select between Off and On. If select "On" , you can not enter into the most window before entering the password.
There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window. Since the same operation as the above the Add Satellite window, here we don't explain any more. 3.7 Favorite 3.8 Other 1.
4. T ools 4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Y es button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit.
Press OK key at the Start button to start receiving date from RS232 for 10 seconds. 4.3 SatcoDX Auto Programing 5. Game 1. Press OK key or key to enter into the game. 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu.
Press INFO key to pop up the Info bar. Press INFO key again to pop up the program guide of the current program. You can press keys to know the program guide of the future 16 days. 6. Hot Key Press EPG key to enter into the EPG window. 1. Press PR+, PR-, keys to select up or down, left or right.
Press FIND key on to pop up the Find window. Use numeric keys to enter into the character and use the colour keys to realized the corresponding operation.
1. Press keys to enter into the Audio window. 2. Press keys to select among Left, Right, Stereo, and Mono. 3. Changing the audio mode is only connected with the current channel, not all the channels. 4. Press MENU or EXIT key to close this window. 6.11 Audio Press key to switch the current channel to the previous channel.
Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket.
デバイスFortec FS-4000v2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fortec FS-4000v2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFortec FS-4000v2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fortec FS-4000v2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fortec FS-4000v2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fortec FS-4000v2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFortec FS-4000v2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fortec FS-4000v2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFortec FS-4000v2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。