Fujitsuメーカー2142-02の使用説明書/サービス説明書
ページ先へ移動 of 23
FUJITSU SEMICONDUCTOR CONTROLLER MANUAL F 2 MC FAMILY 10BASE-T LAN ADAPTER MB2142-02 USER’S MANUAL CM41-00412-1E.
PREFACE ■ Objectives and intended readership The MB2142-02 support tool (10BASE-T LAN adapter) is designed to enable the development and evaluation of products based on the F 2 MC* family.
1995 FUJITSU LIMITED Printed in Japan 1. The products described in this manual and the specifications thereof may be changed without prior notice. To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu authorized dealer.
READING THIS MANUAL ■ Page layout In this manual, an entire section is presented on a single page or spread whenever possible. The reader can thus view a section without having to flip pages. The contents of each section are summarized immediately below the title.
i CONTENTS CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT ................................................. 1 1.1 Packing List ......................................................................................................................
ii FIGURES TABLES Figure 1.1 10BASE-T LAN adapter ............................................................................................................... 2 Figure 1.3 IF cable dimensions ........................................................
1 CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT This chapter explains the handling and specifications of the 10BASE-T LAN adapter. Read this chapter and check the contents of the package before attempting to use the 10BASE-T LAN adapter. 1.1 Packing List 1.
2 1.1 Packing List Before first using the 10BASE-T LAN adapter, check that the package contains the following components: • 10BASE-T LAN adapter × 1 • IF cable × 1 ■ Appearance and names of parts Figure 1.1 illustrates the 10BASE-T LAN adapter.
3 The function of each part is described below: IF connector: Used to connet the IF cable. 10BASE-T LAN connector: Used to connect the twisted pair LAN cable.
4 1.2 10BASE-T LAN Adapter Specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. Table 1.2b lists the LAN specifications. ■ 10BASE-T LAN adapter specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. *1: Power is supplied from the main unit.
5 ■ LAN specifications Table 1.2b lists the LAN specifications. An RJ45 type LAN connector (8-conductor modular connector, 10BASE-T-compatible) is used. Note: To set the IP address, port address, or Ethernet local address, use the LAN address write program supplied with the emulator debugger.
6 1.3 IF Cable Specifications Table 1.3a lists the IF cable components, Table 1.3b lists the general specifications of the IF cable, and Figure 1.3 shows the dimensions of the IF cable. ■ IF cable specifications For an explanation of connecting the adapter to the main unit, see Section 2.
7 Figure 1.3 IF cable dimensions 300 ± 1 0mm Con ne ctor (FCN -23 7R 068- G/E ) Cov er (FCN- 230 C 068-C /E).
8 1.4 Notes on Use When using the 10BASE-T LAN adapter, keep the following points in mind: ■ Operating considerations When using the 10BASE-T LAN adapter, always keep the following points in mind: ❍ Turn off the power before connecting or removing a cable.
9 CHAPTER 2 CONNECTIONS This chapter describes how to connect, turn on, and turn off the 10BASE-T LAN adapter. Familiarize yourself with the contents of this chapter before attempting to turn on the adapter. 2.1 System Configuration 2.2 Connection to Main Unit 2.
10 2.1 System Configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN-based communication with the host machine. ■ System configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN- based communication with the host machine.
11 Memo.
12 2.2 Connection to Main Unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). ■ Connection to main unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately).
13 ■ Notes When connecting the 10BASE-T LAN adapter to the main unit (sold separately), keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction.
14 2.3 Connection to Network As shown in Figure 2.3, connect the LAN conector to the network that includes the host machine. ■ Connection to network According to Figure 2.
15 ■ Notes When connecting the LAN connector to the network that includes the host machine, keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction.
16 2.4 Power-on Sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, the main unit, then the target (user system). ■ Power-on sequence Before turning on the power, ensure that all connections are complete.
17 2.5 Power-off Sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. ■ Power-off sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. To turn off the power, set the power switch on the rear panel of the main unit to “0.
デバイスFujitsu 2142-02の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu 2142-02をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu 2142-02の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu 2142-02の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu 2142-02で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu 2142-02を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu 2142-02の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu 2142-02に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu 2142-02デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。