FujitsuメーカーAOU18CLの使用説明書/サービス説明書
ページ先へ移動 of 19
KEEP THIS OPERA TION MANUAL FOR FUTURE REFERENCE FUJITSU GENERAL LIMITED P/N9315255020-0 1 OPERA TING MANUAL MODE D’EMPLOI MANUAL DE FUNCIONAMIENT O English Français Español Indoor Unit ASU18CL Outdoor Unit AOU18CL 05M150_9315255020-01_Cover 2005.
CONTENTS SAFETY PRECA UTIONS ..................................... En-1 FEA TURES AND FUNCTIONS ............................ En-2 NAME OF P AR TS ................................................ En-3 PREP ARA TION .....................................
CONTENTS SAFETY PRECA UTIONS ..................................... En-1 FEA TURES AND FUNCTIONS ............................ En-2 NAME OF P AR TS ................................................ En-3 PREP ARA TION .....................................
CONTENTS SAFETY PRECA UTIONS ..................................... En-1 FEA TURES AND FUNCTIONS ............................ En-2 NAME OF P AR TS ................................................ En-3 PREP ARA TION .....................................
En-2 FEA TURES AND FUNCTIONS INVERTER At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit automatically switches to a low power setting for eco- nomic and comfortable operation.
En-3 Fig. 1 Indoor Unit 1 Operating Control Panel (Fig. 2) 2 MANUAL AUTO button ● When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced cooling operation will start. ● The forced cooling operation is used at the time of installation.
En-4 PREP ARA TION CAUTION! ● T ak e care to prevent infants from accidentally swallowing batteries. ● When not using the Remote Control Unit for an extended period, remove the batteries to avoid possible leakage and damage to the unit.
En-5 T o Select Mode Operation 1 Press the ST ART/STOP button (Fig.6 Q ). The indoor unit’ s OPERA TION Indicator Lamp (red) (Fig. 3 5 ) will light. The air conditioner will start operating. 2 Press the MASTER CONTROL button (Fig.6 K ) to se- lect the desired mode.
En-6 T o Stop Operation Press the ST ART/STOP button (Fig. 6 Q ). The OPERA TION Indicator Lamp (red) (Fig. 3 5 ) will go out. About AUTO CHANGEOVER Operation AUTO: ● When A UTO CHANGEO VER operatio.
En-7 TIMER OPERA TION s Before using the timer function, be sure that the Remote Control Unit is set to the cor rect current time ( ☞ P . 4). T o Use the ON timer or OFF timer 1 Press the ST ART/STOP button (Fig. 6 Q ) (if the unit is already operating, proceed to step 2).
En-8 SLEEP TIMER OPERA TION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped. To Use the SLEEP Timer While the air conditioner is operating or stopped, press the SLEEP button (Fig.
En-9 ADJUSTING THE DIRECTION OF AIR CIRCULA TION V ertical (up-down) direction of airflow is adjusted by pressing the R emote Control Unit’ s SET button. Horizontal (right-lef t) airflow direction is adjusted manually , by moving the Air Flow Direction Louvers.
En-10 SWING OPERA TION MANUAL AUTO OPERA TION Use the MANUAL AUTO operation in the event the Remote Control Unit is lost or otherwise unavailable. How T o Use the Main Unit Controls Press the MANUAL AUTO button (Fig. 2 2 ) on the main unit control panel.
En-11 1 2 CLEANING AND CARE ● Before cleaning the air conditioner , be sure to turn it off and disconnect the P ower . ● Be sure the Intake Grille (Fig. 1 9 ) is installed securely . ● When removing and replacing the air filters, be sure not to touc h the heat exc hanger, as per - sonal injury may result.
En-12 Air Cleaning Filter Installation 1. Open the Intake Grille and remove the Air filters. 2. Install the Air cleaning filter set (set of 2). 1 Set the air cleaning filter into the air cleaning filter frame. 2 Engage the latch at both ends of the filter with the two hooks at the rear of the air cleaning filter frame.
En-13 TROUBLESHOOTING W ARNING! Symptom Doesn’t operate immedi- ately: Noise is heard: Smells: Mist or steam are emitted: Airflow is weak or stops: Problem ● If the unit is stopped and then immediately started again, the com- pressor will not operate for about 3 minutes, in order to prevent fuse blowouts.
En-14 TROUBLESHOOTING Symptom Doesn’t operate at all: Poor Cooling performance: The unit operates differently from the Remote Control Unit’ s setting: See Page — 7 - 8 — 5 4 CHECK ONCE MORE It.
En-15 OPERA TING TIPS Dry Mode About 1 4 °F to 1 15 °F About 64 °F to 90 °F Outdoor temperature Indoor temperature Cooling Mode About 14 °F to 1 15 °F About 64 °F to 90 °F T emperature and Hum.
05M150_9315255020-01_En 2005.12.15, 10:56 16.
デバイスFujitsu AOU18CLの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu AOU18CLをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu AOU18CLの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu AOU18CLの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu AOU18CLで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu AOU18CLを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu AOU18CLの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu AOU18CLに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu AOU18CLデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。