FujitsuメーカーE8010の使用説明書/サービス説明書
ページ先へ移動 of 29
1 Fujitsu LifeBook E Series BIOS Guide LifeBook E Series Models: E8010 Document Date: 06/09/04 Document Part Num ber: FPC58-1150-0 1 FUJITSU COMPUTER SYSTEMS.
2 LifeBook E Series BIOS E Series BIOS BIOS SETUP UTILITY The BIOS Setup U tility is a program that sets up the operating en vironment for y our notebook. Y our BIOS is set at the factory for nor mal operating conditions, therefor e there is no need to set or change the BIOS environment to op erate your notebo ok.
3 3. If an error message is displa yed on the screen, and you want to enter the setup utility , press the [F2] key . 4. W hen the setup utility star ts with a fault present, the system display s the following message: Warning! Error message [Continue] 5.
4 LifeBook E Series BIOS MAIN MENU – SETTING STAN DARD SYSTEM PARAMETERS The Main M enu allows y o u to set or view the current system parameters. (See N avigat ing through the Setup Utility on pa ge 2 for more informat ion.
5 Primary Ma ster: ■ Selects Primary Master submenu The product number of the hard drive. Display t he type of device on this A T A/A T A PI interface, if there is one. Pressing the Enter key selects the Primary Mas ter submenu allowing additional device configur ation options for this interface.
6 LifeBook E Series BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what A T A dev ices are installed. Figure 2. Primary Mas ter Submenu T able 2: Fields, Options an.
7 Heads: ■ A number between 1 and 16 –— Thi s item is active only when Hard Disk is selec ted as type. Y ou can change the value by increment ing (p ressing the [Spacebar]) or by typing in the number . Sectors: ■ A number between 0 and 63 –— Thi s item is active only when Hard Disk is selec ted as type.
8 LifeBook E Series BIOS Secondary Maste r Submenu of the Main Menu The Secondary Master submen u allows you to configure secon dar y A T A devices. Figure 3.
9 Exiting from Main Menu W hen you ha ve finished setting the parameters on this menu, you can either exi t from the setup ut ilit y , or move to another menu. I f you wish to exit fr om the setup utility , press the [Esc] key or use the cursor k e ys to go to the Exit menu.
10 LifeBook E Series BIOS ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Ad vanced M enu allows y ou to: ■ Set the I/O addresses for the ser ial and parallel por ts. ■ Set the keyboar d and mouse features. ■ Select between the display panel and an e x ternal CR T display .
11 Internal Device Configurations –— –— When selected, ope ns the Internal Device Configuration submenu, which allows enab ling or disabling the IDE, Modem, LAN, and WLAN Control lers. CPU Features –— –— W hen selected, opens the CPU Features submenu to allow you to change the CPU speed for battery life opt imization.
12 LifeBook E Series BIOS Serial/Parallel Port Configu ration Submenu of the Advanced Menu The Serial/P ar allel P or t Configuration submenu lets y ou set the I/O addresses and interr upt levels for the serial, infrared and parallel port s of your notebook.
13 T able 5: Fields, Options and Defaul ts for the Serial/Parallel Port Conf iguration Submenu of Advanced Menu Menu Field Options Default Description Serial Port: ■ Disabled ■ Enabled ■ Auto [E.
14 LifeBook E Series BIOS Keyboard/Mo use Features Submenu of the Advanced Menu The K eyboard/Mouse F eatures submenu is for setting the paramet ers of the int egr ated and exte rnal mouse and ke y bo a rd .
15 Vid eo Features Submenu of th e Advanced Menu The Vid eo Features sub menu is for setting the display parameters. Figure 7. Video Features Submenu T able 7: Fields, Options and Defaults for the Vid.
16 LifeBook E Series BIOS Internal Device Configurat ions Submenu of the Advanced Menu The Internal Device Configuration submenu allo ws the user to enable or disable IDE, Modem, LAN and W ireless LAN Contr ollers.
17 CPU Features Submenu of the Advanced Menu The CPU Featur es submenu provides options for configuring the Int el SpeedStep power management features of the CPU .
18 LifeBook E Series BIOS USB Features Submenu of the Advanced Menu The USB Featur es submenu pr ovides options for enabling or disabling the USB Floppy Disk Drive.
19 Miscellaneous Configuratio ns Submenu of the Advanced Menu The Misc ellaneous Configurations submenu provides option s for enabling or disabling the power button and the W ake U p On LAN feature, and setting the volume and video memor y size. Figure 11.
20 LifeBook E Series BIOS Event Logging Sub menu of the Advanced Menu The Ev ent Logging submenu configur es event logging features for DMI events. Figure 12.
21 SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows y ou to set up the data security features of y our notebook to fit your operating needs and to view the current data secur ity configuration. (S ee N avigating through the Setup Utility on page 2 f or more information.
22 LifeBook E Series BIOS Exiting from the Security Menu W hen you ha ve finished setting the parameters on the Security Me nu, you can ei ther exit from setup utility or mov e to another menu. If y ou w ish to exit from setup utility , press th e [Esc] k ey to go to the Exit Menu.
23 Hard Disk Security Submenu of the Security Menu The Hard Disk Secur ity submenu is for co nfiguring hard disk security features. Figure 14. Hard Disk Security Submenu T able 14: Fields, Options and.
24 LifeBook E Series BIOS Owner Informatio n Submenu of the Security Menu The Owner Information sub menu is for setting o w ner inform ation. N ote that the o wner information cannot be set without having entered a Super visor P ass word.
25 Security Chip Setting Submenu of the Security Menu The Security Chip Se tting submenu is used to enable or disabled the embedded security chip. Figure 16. Security Chip Setting Subme nu Menu Field Options Default Description Security Chip: ■ Disabled ■ Enabled [Disabled] Allows you to enable or dis able the se curity chip.
26 LifeBook E Series BIOS BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE The Boot Me nu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Na v igating Through the Setup Utility to mak e any changes.
27 Boot Device Priority Submenu of the Boot Menu The Boot Dev ice Priority submenu is for setting the or der of checking of sour ces for the operat ing system.
28 LifeBook E Series BIOS INFO MENU - DISPLAYS BA SIC SYSTEM INFORMATI ON The Info M enu is a display only screen that pro vides the configuration i nformation for y our notebook. The following table shows the names of the menu fields for the Info men u and the information displayed in those fields.
29 EXIT MENU – LEAVIN G THE SETUP UTILITY The Exit M enu is used to leav e the setup utility . Follow the instructions for Na v igating Through the Setup Utility to mak e any changes. (See N av igating throug h the Setup Utilit y on pa ge 2 for more infor mation.
デバイスFujitsu E8010の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu E8010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu E8010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu E8010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu E8010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu E8010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu E8010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu E8010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu E8010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。