FujitsuメーカーF9600の使用説明書/サービス説明書
ページ先へ移動 of 19
June 2008 Edition 1725-3634-001 Version E Fujitsu F9600 Telephone System LinkPlus Interface Guide SpectraLink 6000 System SpectraLink 8000 System.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries.
PN: 1725-36134-001_E.doc 3 About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our Lin kPlus digital integration technology to inte grate with various digital switch platforms.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 4 Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.
About this Guide PN: 1725-36134-001_E.doc 5 Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware.
.
PN: 1725-36134-001_E.doc 7 Plan the Interface The system administrator programs the telephone system for use with the handset System using the norma l administration terminal or procedures.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 8 “model” handsets then use the mod el as a template to program the other handsets. • All handsets are different : All handsets are programmed differently, so each handset w ill be programmed individually.
Plan the Interface PN: 1725-36134-001_E.doc 9 The system administrator may use the Extension Assignments Worksheet at the end of this document to track the port numbers, extensions, users, and features assigned to h andsets. The Wireless Telephone Display The SpectraLink Wireless Telephone will display the telephone number as it is dialed.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 10 Feature Programming Requirements When planning the interface, the fo llowing information must be taken into account: Line sequences The handset uses two types of key seq uences to access PBX features and multiple lines.
Plan the Interface PN: 1725-36134-001_E.doc 11 SpectraLink 6100 MCU For the SpectraLink 6100 MCU, the handset function menu tex t can only be changed via remote configuration through the services of Polycom’s Customer Support.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 12 Autodial FAB10 through FAB13 may be used for up to 4 Autodial numbers per handset. Specifics are described later in this document. Ring types Handset ring types (soft, normal, vibrator, etc.
PN: 1725-36134-001_E.doc 13 Interface Implementation This section describes the recommended programming to use the SpectraLink 6000 System (MCU) or SpectraLink 8000 Wireless Telephone system (Gateway) with a Fujitsu F9600 telephone system. The procedures assume: • The F9600 is installed and operational in an approved configuration.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 14 SpectraLink 8000 Telephony Gateways Connect to the SpectraLink 8000 Telephony Gateway using t he serial or modem interface. From the Main Menu, choose Gateway Configuration.
Interface Implementation PN: 1725-36134-001_E.doc 15 The FCN +[number] and LINE+[numb er] labels represent the key sequence on the handset mapped to the corresponding key on the desk set.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 16 Note that the TYPE must be 3. The other parameters in the bracke ts can be the default values. Other related commands: CHA MLDT, DEL MLDT, DIS MLDT Clear programmable buttons The programmable buttons are probab ly assigned to a default button pattern.
Interface Implementation PN: 1725-36134-001_E.doc 1 7 Note: The following features should not be assigned to the PTB 4xx, and should not be assigned to other SpectraLink Wireless Telephones if they ar.
LinkPlus Interface Guide: Fu jitsu F9600 Telephone System PN: 1725-36134-001_E.doc 18 Using the Autodial feature 1. To use the Autodial feature, perform the following steps: 2. Press START on the same handse t that was programmed above. 3. Press the Autodial key sequence for the number to be dialed ( FCN + 4, FCN + 5 , FCN + 9 , or FCN +*).
PN: 1725-36134-001_E.doc 19 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Handset # Ext. # Name Interface Module Circuit # Comment Handset Serial # Handset 1 1 Handset 2 2 H.
デバイスFujitsu F9600の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu F9600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu F9600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu F9600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu F9600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu F9600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu F9600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu F9600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu F9600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。