Furunoメーカー1933C-BBの使用説明書/サービス説明書
ページ先へ移動 of 252
MARINE RAD AR MODEL 1823C-BB MARINE RAD AR MODEL 1833C-BB MARINE RAD AR MODEL 1933C-BB MARINE RAD AR MODEL 1943C-BB MARINE RAD AR MODEL 1953C-BB COLOR VIDEO PLO TTER GD-1900C-BB offered by Busse-Yachtshop.
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi y a, Ja p an Nishinomi y a, Ja p an Tele p hone : Tele p hone : 0798-65-2111 0798-65-2111 fa x fa x 0798-65-4200 0798-65-4200 : : F IRST EDITION : F IRST EDITION : DEC.
i SAFETY INSTR UCTIONS WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. Turn off the radar power switch before servicing the antenna unit. Post a warn- ing sign near the switch indicating it should not be turned on while the antenna unit is being serviced.
ii T A BLE OF CONTENTS FOREWORD ...................................................................................................... viii SYSTEM CONFIGUR A TIONS .............................................................................. x 1. OPERA TION AL OVERVIEW .
iii 2.15 Z oom ...................................................................................................................... .. 2-18 2.15. 1 Zoom ing i n o n radar t argets .....................................................................
i v 3. PLOTTER OPER A TION ................................................................................. 3-1 3.1 Pl otter D ispl ays........................................................................................................... .3 - 1 3.
v 3.1 1 Al arms ................................................................................................................... . 3- 52 3.1 1. 1 A udio al arm on/o ff ................................................................................
vi 4.15 I nter preting the Soun der Di splay .............................................................................. 4-27 4.15. 1 Zer o line .......................................................................................................
vi i 7. MAIN T ENANCE, TROUBLESHOO T IN G ...................................................... 7-1 7.1 Pr even tive M ainten ance............................................................................................... 7-1 7.2 R eplacem en t .
v iii FOREWORD A W ord to the O w ner of the Model 1800C-BB/ 1900 C - B B Se r i es Ma r i ne R ada r , GD-1900C-BB Color V ideo Plotter FURUNO E l ectr i c Comp any t hanks y ou for purc has i ng the M odel 1800C- B B / 1900C- B B Seri es M ar i ne Radar , GD- 1900C- B B Col or V ideo Pl ott er .
ix Features T he 1800C-BB/ 1 900 C- BB s er i es of r adar s a nd vi deo plot ters w ork wi thi n our new prod uc t -netw ork syst em c all ed the “Na vNet.” E a ch prod uct has an I P address to communi cate w ith NavNet c om p ati ble produc t s wit hin t he netw ork , using T CP/I P protoc ol through an Ethe r net 10BASE-T network.
x SYSTEM CONFIGU RA T IONS Al l Nav Net produc t s inc or por ate a “ net w ork ci rcuit boar d” t o int egr at e each Na vNet pr od uct on board t hrough a n opt ional LAN cabl e (Ether net 10BASE-T ). Each NavNet prod uct is assi gned an I P addres s t o enable t r ans f er of i mages b et w een other Na vNet produc t s.
xi Single-unit NavNet system (GD-1 900 C-BB) Network Sounder ETR-6/10N ETR-30N GPS receiver GP-310B/320B 12 - 24 VDC 100/110/115/220/230 VAC 1 φ , 50/60 Hz : Standard : Option Plotter, etc. Rectifier PR-62 VGA monitor (Owner supply) Facsimile Receiver FAX-30 Other NavNet system (Model 1833C-BB, etc.
xii T w o-unit NavNet sy stem Radar Antenna Unit OR GPS Receiver GP-310B/320B Radar , plotter data Radar , plotter data Radar Antenna Unit OR GPS Receiver GP-310B/320B RAD AR or PLO TTER RAD AR or PLO.
1-1 1. OPERA TIONA L OVER VIEW T his c hapt er provides t he basic i nform at ion needed t o get you s t arted usi ng y our radar , video pl ott er . T he foll ow ing t opics ar e pres ent ed: • Con.
1. OPERA TIONA L OVERVIEW 1-2 1.1 O perating Control s Ove rview of contr ol unit T he radar , video pl ott er , sounder a nd c h art s y stems ar e op erate d wi th the cont r ol unit . T en keys ar e l abeled and t hey pr ovi de t he f unc t ion show n on their l abels .
1. OPERA TIONAL OVER VIEW 1-3 Sof t keys T he funct i on of t he f ive sof t k ey s (A , B, C, D and E ) changes ac c or di ng to t he operati on. T hei r l abel s for t heir c ur r ent funct i ons are show n on the screen. T o hide or s how the sof t key s, pr es s t he [HI DE/S HO W ] key .
1. OPERA TIONAL OVER VIEW 1-4 1.2 Inserting a Char t Card Y our unit r eads F URUNO and Nav-Chart s ™ (NA VI ONI CS) chart cards, or C-M AP c har t cards, dependi ng on the t y pe of pr oc es s or uni t y ou have. I nsert t he appropri ate chart card for y our area as f oll ow s: 1.
1. OPERA TIONAL OVERVIEW 1-5 1.3 T urning the Unit On/Off Press the [ POWER/T X ] key on the contr o l u n it to turn on the p owe r . The POWER lamp on the processor u n it lights. A beep sounds and the eq uipment proceeds in the sequen ce shown below , displaying product informatio n, startup test results and the chart usage dis claim er .
1. OPERA TIONAL OVER VIEW 1-6 1.4 A djusting Hue, Panel Illumination Y ou may s el ect t he color s f or the radar , plot t er and overlay dis pl ay s , and adjust the p anel illumin at ion as b elo w . 1. Press t he [PO W ER/ T X ] k ey moment aril y .
1. OPERA TIONA L OVERVIEW 1-7 4. Press the B : PANEL BRI LL soft key . T he panel il l umi nation adj ustment wi ndow appear s at the bott om of t he s c r ee n. T his w indow s how s the current ill umi nat ion level by bar graph. PANEL BRILLIANCE 8 panel bri llian ce wi ndows 5.
1. OPERA TIONAL OVER VIEW 1-8 1.5.2 Selecting a display 1. Press the [ DI S P ] key t o show the di spl ay sel ecti on w indow . T he icons of modes not avai l able ar e s haded. HOT P AGE 1-HO T P AG E 6 ar e user-ar r angeabl e dis pl ay s c al led “ hot pages, ” w hic h y ou can conf igure as y ou li ke.
1. OPERA TIONA L OVERVIEW 1-9 1. 5.3 Sw it chin g cont ro l in co mb inat ion and ov erlay s c ree ns A sof t key i s provide d in r el evant c om bi nati on and o v er l ay s c r eens t o swi tch contr ol betw een displ ay s .
1. OPERA TIONAL OVER VIEW 1-10 1.5.4 Selecting im age source W hen more than one net w ork radar or net w ork sounder i s connect ed to the equipm ent , y ou may s el ect an i mage sourc e f or each as show n below . T his i s not neces s ar y w hen onl y one netw ork radar or net w ork sounder i s connect ed.
1. OPERA TIONAL OVER VIEW 1-1 1 1.6 T rackball, Cursor T he track bal l f uncti ons to shi f t t he cur s or , for m eas ur ement of range and beari ng to a l ocati on (radar) and l ati tude and l ongi tude posi ti on (plot ter). Roll the trac k bal l t o shif t the curs or .
1. OPERA TIONAL OVER VIEW 1-12 1.7 Entering the MO B Mark, Setting MOB as Destination T he MO B (M an Overboard) mar k f uncti ons to mar k m an overboard pos i ti on. Y ou can i ns c r i be thi s mark f rom any mode, exc ept w hil e play ing bac k dat a or conduct i ng any t est.
1. OPERA TIONA L OVERVIEW 1-13 1.8 D ata B oxes Data box es, pr o vidi ng na vigati on data, m ay be show n on any f ull -screen di spl ay . Up to si x data box es ( t w o i n case of l arge chara cte.
1. OPERA TIONA L OVERVIEW 1-14 1.8. 2 Rear rangi ng d ata bo xes Y ou ma y sel ec t t he l ocati on for dat a boxes as f o ll ow s: 1. Using t he track bal l, place t he cursor i nsi de t he data box y ou wi sh to m ove. A s the cur s or ent ers t he box it changes to a n open hand.
1. OPERA TIONAL OVER VIEW 1-15 1.9 Function Key s T he funct i on key s provide f or one- t ouch execut i on of a desi red func t ion. T he defaul t func t ion key set t ings ar e as s how n in the t able below .
1. OPERA TIONA L OVERVIEW 1-16 2. Press f uncti on key des i red. Note : Functi on key s can be i ndi vidual l y pr ogr am m ed f or the pl otter , radar and sound er di spl ay s. F or further det ail s see the f ollow ing: Radar : paragr ap h 5.2. 3 Pl ot ter: par agr ap h 5.
1. OPERA TIONA L OVERVIEW 1-17 Radar NavN et process or uni t -gener at ed echo es 1. Sel ec t RADAR, t hen pres s t he A:EDI T s oft k ey . RADAR ▲ SIMULA TION 1 SIMULA TION 2 LIVE ▼ 2. Sel ec t S I MULA TI ON 1, then push t he [ENT ER] k nob. 3.
1. OPERA TIONA L OVERVIEW 1-18 10. Sel ect LO NGIT UDE, t hen pr es s t he A:EDI T s of t key . 11. Ent er longi tude (s et ti ng r ang e, 180 ° E- 180 ° W , de faul t set ti ng, 125 ° 0 0.000’ W ). T o change W to E, or vic e versa, press t he A : W <- - > E s of t ke y .
2-1 2 . RA D A R OPE RA TION T h i s chapt er c o vers rad ar op erati on, i ncludi ng the ARP ( A ut o Plot ter) f uncti on. ARP requi res a M odel 180 0-BB/ 1900-B B s er i es net w ork radar equi pped w it h the ARP ci rcui t board. 2.1 Radar Displ a y TRAIL 30m 02m30s G1 IN G2 OUT ES 2 EAV L IR L EBL1 27.
2. RA DAR OP E RA TI ON 2-2 2.2 T ransmitt ing, St and-b y 1. Confi rm that the netw ork radar i s plugged i n if neces s ar y . 2. Press t he [DI SP] ke y to sel ec t a radar dis pl ay . 3. Press t he [PO WER/TX ] key m om ent arily . 4. Press t he D:RADA R ST BY sof t key to hi ghlight T X on i t s l abel.
2. RA DAR OP E RA TI ON 2-3 1. Press the [ GAI N] key to s how the “gai n adjus t ment” s of t key s, and the las t -used adj us t ment w indow appears. T he exampl e below show s the gain sensi ti vi ty adjus t ment wi ndo w . T he gain sof t keys show n depend o n radar source as s h ow n below .
2. RA DAR OP E RA TI ON 2-4 2.5 Reducing Sea Clutter 2.5. 1 How the A/C SE A w orks Echoes f rom w aves can be t roubles ome, c o veri ng the cent r al part of the di s pl ay wit h random si gnals k now n as “sea cl utter ” . T he hi gher t he w aves and the hig her the ant en na ab o ve the w ater , the f ur t her the cl utt er w ill ex t end.
2. RA DAR OP E RA TI ON 2-5 5. Wh en t h e radar sou rce is th e Mod el 180 0- B B/ 1900-BB se ries, sea clutt er and rai n c l utt er c an be aut omat ical ly r ej ected. Press the D: A / C A T O N/OFF soft key to sel ect O N or OFF as appr opri ate.
2. RA DAR OPE RA TION 2-6 2.7 Range Scale T he range sett ing det er m i nes the s i ze of t he area (i n naut ical mi l es) t hat w ill appear on y our dis pl ay .
2. RA DAR OP E RA TI ON 2-7 2.8 Pulsele ngth T he pulsel ength i n use i s di splay ed at t he upper l eft corner of the di s pl ay . Appro priat e pulsel engths ar e preset to i ndi vidua l range scal es. T herefore, y ou are not us u ally requi red to sel ect t hem.
2. RA DAR OPE RA TION 2-8 2.9 Present ation Mode T his uni t provi des f our radar pres ent at i on modes: head- up, c our s e- up, north-up and true m ot ion. Heading dat a is requi red for m odes ot her than head-up. 2.9.1 Selecting a pr esent ation m ode 1.
2. RA DAR OP E RA TI ON 2-9 2.9.2 Descr iption of present ation modes Head-u p A dis pl ay w ithout azim ut h st ab iliz atio n in w h ich t he line c onnect i ng the cent er w i t h t he top of t he dis pl ay i ndic at es ow n shi p’ s headi ng.
2. RA DAR OPE RA TION 2-10 Nor th-up I n the nort h- up m ode, t ar get s are pai nted at t heir m eas ur ed di st ances and i n thei r true ( c om p ass) di rect i ons fr om ow n ship. North i s mai nt ai ned at the t op of the sc r een. T he headi ng l ine c hanges i t s dir ec t ion acc or di ng to shi p’s headi ng.
2. RA DAR OP E RA TI ON 2-1 1 2.10 Measuring the R ange Y ou can measure t he r ange t o a radar t arget t hree w ay s : by t he range ri ngs , by the cur s or , and by t he VRM ( V ari abl e Range M ar k er ) . Measur ing range by range rings Count t he num ber of rings bet w een the cent er of the di s pl ay and t he t ar get .
2. RA DAR OPE RA TION 2-12 Measur ing range by cursor Operat e the tr ac k bal l t o place t he cursor i nters ec t ion on t he i nsi de edge of the radar t arget . T he range t o t he t ar get , as w ell as t he bearing, appears to t he right of “+ ” at the bott om of t he di spl ay .
2. RA DAR OP E RA TI ON 2-13 3. Rotat e the [E NT ER] knob to pl ace the V RM on the i nsi de edge of a radar t arget. Read t he VRM i ndic at ion t o f ind range t o the t arget. Y ou may al so adj us t t he VRM , w it hin t he r ange r i ng int erval, by pressi ng the VRM sof t key .
2. RA DAR OP E RA TI ON 2-14 2.1 1 Measuring th e Bearin g T here are tw o way s to meas ur e t he beari ng to a target : by the cur s or , and by t he EBL (E l ectr oni c beari ng Line). M easuri ng beari ng b y curs or Use the t rackb all to place t he c ur s or at the cent er of t he target .
2. RA DAR OP E RA TI ON 2-15 Erasin g EB L dat a bo xe s Press t he EBL (A or D k ey ) sof t key as soc i ated w ith the E B L dat a box y ou w i sh to eras e. Press t he [CLEA R] key once or tw ice to eras e t he d ata box . Hidi ng E BL d ata b oxes Press t he E:Z O OM & D.
2. RA DAR OPE RA TION 2-16 2.12 Erasing the Heading Line, N orth Marker T he heading l ine i ndic at es the shi p's headi ng in al l pres ent ation modes .
2. RA DAR OP E RA TI ON 2-17 2.14 Rejecting Radar Interference Radar i nt erferenc e m ay occur w hen near another shi pborne radar t hat is operati ng in t he same fr equenc y band as y our radar .
2. RA DAR OPE RA TION 2-18 2.15 Zoom T he zoom feat ure all ow s y ou to doubl e the si ze of t he ar ea s el ected w ith t he “zoom c i rcl e.” I t i s avail able on any range but i s i noper at ive in t rue moti on and w hen the di spl ay i s shi f ted.
2. RA DAR OP E RA TI ON 2-19 4. Press the C:ARP TG T ZM sof t key . ▲ ▼ 1 SELECT TARGET NO. T arget no. s elec t ion w indow 5. Use the [ ENT ER] knob t o select number (1- 10), then pus h the [ENT ER] knob. I f the t arget number does not exis t several beep s sound and the z oom funct ion i s cancel led.
2. RA DAR OPE RA TION 2-20 2.16.2 Automatic shif t T he amount of aut omati c shi f t is c al cul at ed accordi ng to shi p’s s peed, and the amount of shif t is l im i ted t o 50% of the range i n use.
2. RA DAR OP E RA TI ON 2-21 2.17 Using the Offset EB L The offse t EB L ca n b e u se d to pre dic t a p ot en tial c ollisio n c ou rse . It ca n a lso b e used to m eas ur e t he range and beari ng bet w een tw o t arget s.
2. RA DAR OPE RA TION 2-22 2.17.2 M easuring r ange & bearing between two t arget s T he procedure w hich fol low s show s how t o m eas ur e t he r ange and bear i ng betw een tw o t arget s, usi ng the t arget s “A ” and “ B ” i n the f i gure bel ow as an exampl e.
2. RA DAR OP E RA TI ON 2-23 2.18 Echo T rails Echo t r ai ls ar e s i mul at ed af t erglow of t arget echoes t hat repres ent thei r movement s rel at ive or tr ue t o ow n ship. T hi s f uncti on is us ef ul f or al erti ng y ou pas t po ss ible collis ion situ atio ns .
2. RA DAR OPE RA TION 2-24 2.18.2 St arting echo tr ails 1. If not di s pl ay ed, press t he [ HI DE / S HO W ] key to show the radar sof t k ey s. 2. Press the D:T ARGET sof t key . 3. Press the A:TRAI L soft key . 4. Pre ss the A:TRAIL ON/OFF so f t ke y to selec t ON.
2. RA DAR OP E RA TI ON 2-25 2.18.4 T rail color T rai l s may be show n i n blue, y el l ow , green or w hite. 1. If not di s pl ay ed, press t he [ HI DE / S HO W ] key to show the radar sof t k ey s. 2. Press t he D: T ARG E T , A:T RAI L and D:T RAIL COLOR s of t key s i n that or der .
2. RA DAR OPE RA TION 2-26 2.19 Echo Stretch Normal ly , the ref l ected ec hoes f rom l ong r ange t arget s appear on t he displ ay as w eaker and sm al ler bl ip s even though they are com pens at ed by t he radar ’ s int ernal c i rcui try . T he echo st retch f uncti on magnif ies t hese smal l bl ip s i n al l ranges.
2. RA DAR OP E RA TI ON 2-27 2.20 Echo A v eraging T he echo avera ge featur e, w hic h requi res a M odel 1800-BB/ 1900 -BB ser i es netw ork radar , ef fec ti vel y suppres s es s ea c l utt er .
2. RA DAR OP E RA TI ON 2-28 2.21 Outputting TLL Dat a T arget posi ti on dat a c an be out put to uni t s of t he net w ork and show n on their plot ter sc r een w ith t he T T L mark ( X ). T his f uncti on requi res pos i ti on and heading dat a. 1.
2. RA DAR OP E RA TI ON 2-29 2.22 Guar d A larm T he guard alar m al low s the operat or t o set t he des i red range and beari ng for a guard zone. W hen shi ps , isl ands, l andmasses , etc. vi ol ate t he guard z one, an audio al arm sounds and t he of f ending t arget bl ink s t o call the operat or ’s att ention.
2. RA DAR OPE RA TION 2-30 T he equipment then searc hes f or t arget s ins i de the guard z one t o determi ne guard al ar m t ype. I f a t ar get is f ound insi de the guard z one, the guard zone t y pe becomes an “ O utw ard guard al arm, ” and any t arget ex i ti ng the guard zone w ill tri gger the audi o alar m .
2. RA DAR OP E RA TI ON 2-31 2.23 W atchman 2.23.1 How watchm an works T he w atchman f uncti on peri odi cal l y t ransmi t s radar puls es f or one mi nut e to check f or t arget s in a guar d z one. I f a t ar get is f ound in t he z one, w atchman i s cancel led, t he audio al arm sounds and t he radar cont i nues tr ans m i tt i ng.
2. RA DAR OPE RA TION 2-32 2.24 Suppressing Second-trace Echoes I n cert ai n si tuat i ons, echoes f rom very di st ance t arget s may appear as f al se echoes (s ec ond- t race echoes) on t he screen. T his occ ur s w hen the retur n ec ho is r ec ei ved one transmi ssi on cy c l e lat er , or af ter a nex t radar pul s e has been trans mit ted.
2. RA DAR OP E RA TI ON 2-33 2.25 W ay point Marker A w ay poi nt mar k er , show i ng t he locat ion of t he desti nati on w aypoi nt set on t he plot ter , m ay be i ns cr i bed on the radar di spl ay . NAV FUNC 12/ HU L 3nm SP 319. 9 ° M 359.9 ˚ R 11.
2. RA DAR OP E RA TI ON 2-34 2.26 A RP , TTM Operation W hen the radar s our ce i s an ARP-equi pped M odel 1800/1900 ser i es netw ork radar , y ou can manual ly and autom at ical ly acqui re and trac k t en t ar get s. Once a t arget i s acqui r ed aut omati call y or m anual ly i t is aut omati call y tracked w it hi n 0.
2. RA DAR OP E RA TI ON 2-35 2.26.1 Activ ating/deactivating ARP , TTM 1. Press t he [ ME NU] key f oll ow ed by t he C:ARP SET UP sof t key to s how the ARP SET UP menu.
2. RA DAR OP E RA TI ON 2-36 2.26.2 Acquiring and tr acking t arget s (ARP) T en t ar get s may be ac qui red and tr ac k ed m anual ly and autom at ical ly . W hen you att em pt to acqui re an 1 1th t ar get , the m es s age “ A RP FULL – ALRE A DY T RACKI NG 10 T ARG ET S!” appears f or f ive seconds.
2. RA DAR OP E RA TI ON 2-37 6. Press the [ M E NU] key t o clos e t he menu. An acqui sit ion area of 2.0 to 2. 5 mi l es i n r ange and ± 45º on eit her s i de of t he headi ng li ne in bear i ng appears. Note: T arget s being t racked i n aut omati c acqui s i ti on are conti nuousl y trac k ed w hen sw it c hi ng to manual acqui s i ti on.
2. RA DAR OPE RA TION 2-38 2.26.4 T erm inating tracking of ARP t arget s W hen ten t arget s have been acquir ed, no more acqui sit ion occ ur s unl ess t arget s are cancel led.
2. RA DAR OP E RA TI ON 2-39 2.26.5 S etting v ector attr ibutes (ARP) Wh at i s a vector? A vector i s a l ine ex t ending f r om a t racked t arget w hich show s esti mated speed and course of the t arget. T he vector t ip show s an esti mated posi ti on of t he t arget af ter t he s el ected vect or t ime el aps es .
2. RA DAR OPE RA TION 2-40 2.26.6 Di splay ing p ast position (ARP ) T hi s AR P can display t i me-spaced d ot s (maximum ten dots) marking the past posi t ions of any t arget s bei ng trac k ed. Y ou can evaluat e a t arget’s ac t ions by the sp ac i ng betw een dots .
2. RA DAR OP E RA TI ON 2-41 2.26.7 ARP , TTM t arget dat a Y ou can show moti on trends ( r ange, bearing, course, s peed, CP A and T C P A) f or ARP or TT M t ar gets. No te tha t T AR GET ID N UMBER, in th e AR P SET UP menu , must be t urned on to di splay thi s dat a.
2. RA DAR OPE RA TION 2-42 2.26.8 CP A /TC P A alarm (A RP ) W hen the predi cted CP A of any t arget becom es s mal l er t han a preset CP A al ar m range or i t s pr edi cted T CP A l ess than a pr es et T CP A alarm l imi t, an audi o alar m sounds and t he s peak er i con appears ( i n red).
2. RA DAR OP E RA TI ON 2-43 TCPA ▲ ▼ 30 seconds 1 minute 2 minutes 3 minutes 4 minutes 5 minutes 6 minutes 12 minutes TCP A w i ndow 8. Select a T CP A li m i t f r om 30 s ec , 1 min, 2 min, 3 min, 4 min, 5 min, 6 min and 12 mi n. 9. Pre ss t he C:ENT ER sof t key .
2. RA DAR OPE RA TION 2-44 2.27 Interpreting the R adar Display 2.27.1 General Mini mu m and maxi mum rang es M i nim um range T he mini mum range i s defi ned by t he shortes t dist ance at w hi ch, using a s c al e of 1.
2. RA DAR OP E RA TI ON 2-45 Ra dar r esolution T here are tw o import ant fact or s i n radar res ol uti on (dis c r i mi nat i on): bear i ng resol uti on and r ange r es ol uti on.
2. RA DAR OPE RA TION 2-46 2.27.2 False echoes Occ as i onall y ec ho s i gnals appear on t he screen at pos i ti ons w here ther e i s no t arget or di sappear even if there are t argets . Fal s e t arget si t uati ons m ay be recogni zed, how ev er , i f y ou underst and w hy they are di spl ay ed.
2. RA DAR OP E RA TI ON 2-47 Virtual im age A rel at i vely lar ge t arget clos e t o y our shi p may show at t w o posit ions on t he screen. One of t hem is t he true echo di rect l y r ef lect ed b.
2. RA DAR OPE RA TION 2-48 2.27.3 S A RT (S earch and Rescue T r ansponder) A Search and Resc ue T ransponder ( SA R T ) may be tri ggered by any X -Band ( 3 cm) r adar w ithi n a range of appr ox i matel y 8 nm .
2. RA DAR OP E RA TI ON 2-49 Gene ral pr ocedur e for de tect ing SA RT re sponse 1. Use the range scal e of 6 or 12 nm as t he spac i ng betw een the SAR T responses i s about 0. 6 nm (1 125 m) to di sti nguish t he SAR T . 2. T urn of f the autom at ic c l utt er s uppr ess i on (i f appli cable) .
2. RA DAR OPE RA TION 2-50 A/C SEA control For opt imum r ange S A R T detecti on, thi s cont r ol shoul d be s et to the m i nim um . Care shoul d be exerci sed as w anted t arget in s ea c l utt er m ay be obscur ed.
3-1 3. PLOTTER OPERA TION 3.1 Plotter Display s Y ou may s how the plot ter di splay over the ent i re scr een, in t he overl ay s c reen w i t h t he radar di s pl ay , or i n a combi nati on s c r een. 3.1.1 Full-screen plotter display 34 ° 22. 3456'N 359.
3. PLOTT ER OPER A TION 3-2 Na v data w indow T he dat a show n in t he nav dat a wi ndow depends on t he st atus of t he C: NA V sof t key and the c ursor . 359. 9 ° M 359. 9 ° M 79. 9 ° F NU 19. 9kt 99. 9nm 345 ft Bearing to Waypoint Course, Speed Range to Waypoint Water Temp.
3. PLOTT ER OPER A TION 3-3 3.1.2 Comp ass display T he comp as s di spl ay , show n i n c om bi nati on displ ay s , provides st eering inf ormati on.
3. PLO TT ER OPERA TION 3-4 Readi n g th e X TE ( cro ss-t rac k erro r) mon i tor T he X T E m oni tor , l ocated bel ow the compass r o se, s how s t he di stanc e y ou are of f cours e and t he direc t ion t o s t eer to ret urn to course. T he ow n sh i p m ar k er mo ves acc or di ng t o direc t ion and di stance of f course.
3. PLOTT ER OPER A TION 3-5 3.1.3 Highway display T he highw ay di splay , show n i n combinat ion di splay s, prov i des a graphi c present ati on of shi p’s track al ong int ended course. It is useful for moni tori ng shi p’s progr ess tow ard a w aypoi nt.
3. PLOTT ER OPER A TION 3-6 3.1.4 Nav dat a display T he nav data di splay provides comprehensi v e navi gation dat a, and it is show n in a three- screen combi nati on displ ay . T he user may sel ect w hat data t o displ ay and w here to di spl ay i t.
3. PLOTT ER OPER A TION 3-7 3.2 Present ation Mode T hree ty pes of pr esent ati on modes are provided f or the pl otter di spl ay: north-up, course- up and auto course- up. T o change the present ation mode, press t he [HIDE/SH OW ] ke y follow ed by the B :M ODE soft key .
3. PLOTT ER OPER A TION 3-8 3.2.2 Cour se-up T he course-up m ode i s usef ul for m oni tori ng shi p’ s progres s t ow ards a w ay point . T he desti nati on i s at t he top of t he s c r een w hen a desti nat ion i s set.
3. PLOTT ER OPER A TION 3-9 3.3 Shif ting the Display T he plot ter di splay can be shi f ted as bel ow . 1. Use the trac kball to l ocate t he cursor at a s creen edge. T he screen shi f t s in the di recti on opposi te of cur sor loc ation. 2. T o turn of f t he cursor , pr ess the C: CENT ER sof t key .
3. PLOTT ER OPER A TION 3-10 3.5 Chart Cards 3.5.1 Chart car d ov er v iew Y our sy s t em reads F URUNO and Nav Char t s ™ (NA VI O NI CS) c har t s, or C-M AP chart s, dependi ng on the t y pe of pr oc es s or uni t y ou have.
3. PLOTT ER OPER A TION 3-1 1 3.5.2 Indices and chart enlar gement W hen the [RA NGE] k ey i s operated, you w ill s ee sev e ra l fra mes ap pe ar o n t he chart . T hese frames ar e call ed indi ces and they show you w hat part s of the chart can be enl arged in t he current r ange.
3. PLOTT ER OPER A TION 3-12 3.5.3 FURUNO and NavCh art s ™ chart s Chart symb ols T he t able bel ow show s FURUNO and NavCharts ™ c hart sy mbol s and thei r meani ngs.
3. PLOTT ER OPER A TION 3-13 Port servi ce icon s Sel ec t ed NavC har t s show services avai l able at port s, w ith i cons. 1. Use the t rackbal l to pl ace the c urs or on t he sail boat i con (denotes a por t or harbor) des i red. 2. Push t he [ ENT ER] knob.
3. PLOTT ER OPER A TION 3-14 3.5.4 C-M A P chart s Cur sor a nd data displa y Besi des it s fundament al f uncti ons of provi di ng posi t ion dat a, t he c ur s or c an al so show i nf ormati on about caut ion area, depth area, s our c e of dat a, etc.
3. PLOTTER OPERA TION 3-15 Icon dat a Y ou may place the cursor on any icon to find informatio n abo ut the selected icon. 1. For example, place the cursor on a lighthouse icon. Place the cursor on a lighthouse icon. 34 ° 22. 3456'N 359.9 ° M TRIP NU 080 ° 22.
3. PLOTTER OPERA TION 3-16 Color white Height 7. 00 Meters Light characteristic occulting XXXXXXXX XXXXXXXX Navigation mark, fix ed Light. Sample lighthous e data 5. If necessary , move the trackball downward or upwar d to scroll the win dow . 6. Press the E:CANCEL sof t key twice to finish.
3. PLOTT ER OPER A TION 3-17 34 24. 3456 N 359.9 NU 124 24. 3456 W 59.9kt 024nm + Time: 04:35 Height: 0.45ft Draught: 0.65ft 28/10/03 -05 43 ° 32.860N 010 ° 18.022E Port information LIVORNO (LEGHORN) High Water(max) 0.86ft(13:30 L) Low Water(min) 0.
3. PLOTT ER OPER A TION 3-18 3.6 Wor king w ith T rack Y our ship’ s tr ack is plott ed on the scr een using navigat ion dat a fed f rom posi tion- fix ing equi pment. T his secti on show s y ou w hat y ou can do w i th trac k, from turni ng it on or off to changi ng it s pl ott ing i nterval.
3. PLOTT ER OPER A TION 3-19 T arget tracks T arget tracks, w h i ch require NM EA format T T M (T racked T arget Message) dat a sentenc e, may be t urned on or of f as des i red.
3. PLOTT ER OPER A TION 3-20 3.6.3 Changing track color T rack c an be displ ay ed in red (def ault setti ng), y el low , gr een, li ght-bl ue, purpl e, blue and w hite. I t can be usef ul t o change track color on a regul ar basi s to dis crim inate bet w een previous day ’s track, etc.
3. PLOTT ER OPER A TION 3-21 3.6.4 T r ack plotting method and interval for own ship tr ack I n draw i ng the ow n shi p track, fi rst t he ship’ s posi tion f ed from pos iti on-fi xi ng equipm ent is stored i nto the uni t’ s memory at an i nterval of ti me or di st ance.
3. PLOTT ER OPER A TION 3-22 4. Use the trac kball to sel ect di git and enter value w ith t he alphanumer ic key s. T he D: CLEAR s oft key f uncti ons to cl ear an enti re li ne of dat a. 5. Push t he [ENT ER] k nob or C: ENT ER sof t key . 6. Press the [M ENU] k ey t o close t he menu.
3. PLOTT ER OPER A TION 3-23 3.6.6 Er asing track T his p aragraph show s you how to erase ow n ship’ s track and t arget tracks. Y ou can erase s hip’ s track three w ay s: col lec tivel y , by color and by area. Erasin g own shi p track b y area Y ou can erase ow n shi p’s t rack by area as bel ow .
3. PLO TT ER OPERA TION 3-24 Erasin g own shi p trac k by col or Y ou ma y erase ow n ship’ s t rack by c ol or as fol l o w s: 1. Pre ss t he [M ENU] key fol l ow ed by the A:CHART SETUP, B:T RACKS & M ARKS CO NT RO L and C: ERASE T & M soft keys t o show the ERASE menu.
3. PLOTT ER OPER A TION 3-25 3.7 Marks, Lines M arks are usef ul f or denoti ng import ant point s suc h as a good fi shing spot . M arks can be i nscri bed in seven shapes and s ev en col ors: Red, y ell ow , green, li ght-bl ue, purpl e, bl ue and w hit e.
3. PLOTT ER OPER A TION 3-26 MARKS SHAPE ▲ ▼ ✕ M ar k s s hape w indow 7. Use the tr ackball to sel ect m ark shape desi red, t hen press the C: ENT ER sof t key . 8. Select MA RKS SI ZE, then press the A:EDI T sof t key . 9. Use the tr ackball to sel ect LA RGE (def ault s etti ng) or SM ALL as appropr iate.
3. PLOTT ER OPER A TION 3-27 3. Use t he track ball t o sel ect l i ne sty l e desi red, then pr ess the C:E NT ER sof t key . T he li ne sty l e “ dot ” di sabl es l ine dr aw ing. E dge of li nes i s det ermi ned by mark s hape. For exam pl e, sel ecti ng the ci rcl e shape w ill join line s with a ci r c l e as bel ow .
3. PLOTT ER OPER A TION 3-28 3.8 W ay point s I n navigati on termi nology , a w ay point i s a p arti cular locat ion on a voyage w hether i t be a st arti ng, int ermedi ate or desti nati on point . A w aypoi nt i s the si mplest piece of inf ormati on your equipment requires to get y ou to a dest inat ion, in t he shortes t dis tanc e possibl e.
3. PLOTT ER OPER A TION 3-29 6. Press the A:SELEC T MARK sof t key . 7. Press the A:MARK SHAPE sof t key to open t he mark shape selecti on w i ndow . SELECT MARK Waypoint mar k s hape s elec t i on w i ndow 8. Operate t he trackbal l to sel ect shape desi red.
3. PLOTT ER OPER A TION 3-30 Ente ring a w a ypoint by r ange a nd bear ing T his m et hod is us ef ul w hen you w ant t o enter a w ay point using r ange and beari ng t o a t ar get found on a radar .
3. PLOTT ER OPER A TION 3-31 Ente ring a w a ypoint fr om the w a ypoint list Y ou can manual l y ent er w aypoi nt posi ti on from t he w aypoi nt l is t as fol low s: 1. Press the [ M ENU] key to open t he menu. 2. Press t he C:W AY PO I NTS /ROUT ES and A :W AY PO I NTS soft keys .
3. PLOTT ER OPER A TION 3-32 Editing a w aypoint f rom the plotter display Y ou may edi t w aypoi nt s from t he plot ter di splay as fol low s: 1. Press t he [M ENU] key fol low ed by t he C:W AY PO I NTS /ROUT ES and A:W AY POI NT S sof t key to open t he w aypoi nt menu.
3. PLOTT ER OPER A TION 3-33 3.8.3 Er asing way point s Era sing a w a ypoint dir ectly from t he plotte r displa y 1. Operate t he trackbal l to plac e the cursor on t he w ay point y ou w ant t o erase. A fl ashi ng diamond mar k appears over the w ay point w hen the w ay point is correctly selected.
3. PLOTT ER OPER A TION 3-34 3.8.4 Changi n g way po int mark size (F URUNO, NavCh art s™) Y ou may c hange the si ze of al l w ay point marks t o small or l arge (defaul t), or you may tur n the m off. 1. Press the [ M ENU] key to open t he menu. 2.
3. PLOTT ER OPER A TION 3-35 3.8.5 Sear ching way point s Y ou can search f or a w aypoi nt t hrough the al phanumeric w aypoi nt l ist as fol low s: 1. Press t he [M ENU] k ey. 2. Pre ss t h e C:W AY POI NTS/ROUT ES, A:W AY POI NTS and B:A LPHANUM ERI C LI ST soft k eys t o show the al phanumeri c li st.
3. PLOTT ER OPER A TION 3-36 3.9 Routes Of ten a t rip f rom one pl ace to another involves several course changes, requi ring a ser ies of route poi nts (w ay point s) w hi ch y ou nav i gate to, one af ter another . T he sequence of w ay point s l eading to t he ult imat e desti nation i s cal led a route.
3. PLOTT ER OPER A TION 3-37 4. Press the B :NEW ROUT E s oft key to open t he new route ent ry s creen. NEW ROUTE ROUTE NAME COMMENT 0 0 1 LOCAL LIST B CANCEL E PLOT A ALPHA LIST C CONECT D New r out e entry s c r een 5. If desir ed you can c hange the route nam e show n and/or add a com ment.
3. PLOTT ER OPER A TION 3-38 Creatin g voyag e-based ro utes Y ou can create r outes based on y our shi p’s t rack. T he route c an be created automat ical ly by ti me or di st ance, or manual ly . T hi s feat ure is us eful w hen you w i sh to retr ace previous t rack.
3. PLOTT ER OPER A TION 3-39 6. Choose how to recor d poi nt s for y our rout e, by ti m e, by r ange or manual entry , by pr es s i ng A:BCK T RK T I M E, B : BCKT RK T I ME or C: M A NUA L sof t key as appropri ate. F or manual ent ry , go t o step 8.
3. PLOTT ER OPER A TION 3-40 3.9.2 Connecting r outes T w o routes w hich y ou have created can be c onnected as f oll ow s to for m a new route. 1. Press the [ M ENU] key to open t he menu. 2. Press t he C:WA Y POI NT S/RO UT ES sof t key . 3. Press the B:ROUT ES so f t key .
3. PLOTT ER OPER A TION 3-41 3.9.3 Inserting waypoint s Waypoi nt s can be i nserted i n a route as f oll ow s: Inse rting a w a ypoint fr om the route lis t 1. Press the [M ENU] k ey t o open the menu. 2. Press the C:W AY POI NT S/RO UT ES soft key .
3. PLOTT ER OPER A TION 3-42 9. Use the tr ackball to sel ect t he w aypoi nt y ou w ant t o inser t. (Y ou can sw i tch betw een the loca l l ist and alphanumeri c l ist by usi ng the C: LOCAL LI ST and D:ALPHA LIST soft keys. ) 10. Press the A:SELEC T W PT or A:CHANGE W PT soft key, w hichev er i s dis play ed.
3. PLOTT ER OPER A TION 3-43 3.9.4 Rem ov ing w ay points from a r oute Re moving a w aypoint f rom the route lis t 1. Press the [ M ENU] key to open t he menu. 2. Press t he C:WA Y POI NT S/RO UT ES sof t key . 3. Press the B:ROUT ES so f t key . 4. Select a route.
3. PLOTT ER OPER A TION 3-44 3.10 Nav igation T his s ecti on show s y ou how to get t o a desir ed desti nation by “qui ck poi nts ,” w ay point s, port servic es and routes. Note : Recipr ocal set ti ng and canceli ng of dest inat ion i s avail able by outputt ing the dat a sent ence ZDA fr om the NavNet unit connected t o the navigat or .
3. PLOTT ER OPER A TION 3-45 Na vigating t o multiple quic k points 1. Select “35 POI NT S” f oll ow ing t he procedure i n “Selec ting qui ck poi nt entr y method” on the previous page.
3. PLOTT ER OPER A TION 3-46 Select i ng an external waypoi n t Y ou can selec t a w aypoi nt (or r out e) entered at an external plot ter connec t ed w i t h NM EA cable. T his f uncti on requir es t he RMB dat a sentence. 1. Pre ss the [M EN U] ke y , B:PLOTT ER SETUP soft key to sh ow the PL OT TER SET UP menu.
3. PLOTT ER OPER A TION 3-47 ▼ POR T & SER VICE SELECT POR T & SRVC A CCIAROLI A CQU AMORT A A GNONE S. NICOLA A GROPOLI AMALFI BAIA CAPRI CASA MICCIOLA-ISCHIA ▲ P or t services (NavChar t ) P or t list (Na vChar t , Italy) ▼ POR T & SERVICE WC P or t services (C-MAP) TM TM Port s er v i ces and sam ple port li st 4.
3. PLOTT ER OPER A TION 3-48 3.10.4 Following a r oute Select i ng t h e rout e t o fol l ow 1. Press t he [M ENU] key t o open t he menu. 2. Press t he C:W AY POI NT S/RO UT E S s of t key . 3. Press t he B:RO UT ES soft k ey to open t he route l is t .
3. PLOTT ER OPER A TION 3-49 Rest art i ng n avigat i on W hen you s teer to avoi d an obst acle or t he v es sel dri f t s, y ou may go of f y our int ended course, as in Li ne 1 in t he figur e below .
3. PLOTT ER OPER A TION 3-50 Setti ng sp eed fo r E T A calcu l atio n S peed, w hich may be i nput manual ly or automat ical ly , is required t o calc ulate ET A (Esti mated T i me of Arri v al ) to a des tinat ion. 1. Press the [ M ENU] key to open t he menu.
3. PLOTT ER OPER A TION 3-51 T o selec t w ay point s w it ching met hod do the fol low ing: 1. Press t he [M ENU] key . 2. Press the B:PLOT TER SET UP soft key. 3. Us e the trackb all to se l e ct W AYPOI N T SW IT CH I N G. 4. Press the A :EDI T soft key to show the w aypoi nt sw itc hing w i ndow .
3. PLOTT ER OPER A TION 3-52 3.1 1 Alarms T he plot t er sect i on has ei ght condit ions w hich generat e both audi o and vi s ual alarms: arrival alarm, anchor w atch alarm, X T E (Cross T rack Error) a l arm, proxi mit y al arm, s peed al arm, t rip al arm, w ater tem per at ur e al arm and bot t om alar m .
3. PLOTT ER OPER A TION 3-53 3. 1 1.2 Arri v al a larm T he arri val al arm i nforms y ou that your boat is appr oachi ng a desti nati on w ay poi nt. T he area that defi nes an arr i val zone i s that of a cir c l e w hic h y ou approach f r om t he out s i de of t he ci rcl e.
3. PLOTT ER OPER A TION 3-54 3.1 1.3 A n chor watch alarm T he anchor w atc h alarm i nform s you t hat y our boat i s moving w hen it shoul d be at res t. W hen the anc hor w atch i s acti ve, a red dashed ci rcl e w it h an “X” at it s center marks t he anchor w atch ar ea.
3. PLOTT ER OPER A TION 3-55 3.1 1.4 XTE (Cr oss-T r ack Err or) alarm T he X TE alarm w arns y ou w hen your boat is of f it s i ntended cours e. W hen the X T E alarm i s act ive tw o red dashed l i nes mark the X T E al arm area. : Alarm Destination waypoint Own ship position Alarm setting Intended course How t he XTE alar m w or k s 1.
3. PLOTT ER OPER A TION 3-56 4. Use the tr ackball to sel ect W I T HI N, UNDER/ OVER, or OF F as appropri ate 5. For W I T HIN and UNDE R/OVE R use the tr ackball and the al phanumeri c key s to ent er alarm range: Oper ate the t rackbal l to s elect digi t; use t he alphanum eric k eys t o enter value.
3. PLOTT ER OPER A TION 3-57 3.1 1.7 T r ip alar m T he tri p alarm infor ms y ou w hen you have travel ed a cert ain di st ance. 1. Press the [ ALARM ] key to open t he alarm menu. 2. Use the tr ackball to sel ect T RI P ALA RM. 3. Press the A :EDI T soft key to show the t rip al arm w indow .
3. PLOTT ER OPER A TION 3-58 3. 1 1.8 Al arm i nfo rmat ion W hen an alarm setti ng has been viol ated, t he buzzer sounds and the speaker ic on appears and is red. Pres s the [CLE AR] key to si lenc e the alar m. Y ou can see w hi ch alarm has been violat ed on the ALARM menu.
3. PLOTT ER OPER A TION 3-59 A larm messag es T he t able bel ow show s the pl ott er alarm messages and t heir meani ngs. Plott er alarm mes s ages and t heir m eani ngs Messag e Meani ng ARR IVED A T W A Y POINT XXX! (XXX = w ay p oint nam e) Arr iv al al arm v iolated.
3. PLOTT ER OPER A TION 3-60 3.12 Resetting T rip Dist ance T ri p dist ance i s show n on t he nav i gati on data di spl ay . Y ou c an reset t he tri p dis tanc e to zero as f oll ow s: 1. Press t he [M ENU] k ey . 2. Press t he E:S Y ST EM CONFI GURA TI O N and A: GENERAL SET UP sof t key s in t hat order t o show the G ENERAL SET UP m enu.
4-1 4. VIDEO SOUNDER OPERA TION W it h c onnec t ion of t he opti onal Netw ork Sounder ET R-6/ 10N/ 30N you c an s how video sounder i mages on t he di spl ay .
4. V IDEO S OUNDER OP ERA T ION 4-2 4.2 Sounder Display s 4.2.1 S electing a sounder display T here are seven dis pl ay m odes f rom w hi c h t o choose: dual frequenc y , singl e frequenc y , marker z oom , bottom z oom , bottom l ock, bot tom di scri minat ion, and A-sc ope.
4. V IDEO S OUNDER OP ERA T ION 4-3 4.2.2 Descr iption of sounder display s Single- freque ncy dis play Color bar Soft ke ys V ar iab le Range Marker (White) Depth scale Tx frequency Depth 50 30 Te m p . scale W ater temp . graph W ater temp . displa y 50.
4. V IDEO S OUNDER OP ERA T ION 4-4 Dual - f req uency d ispl ay T he dual-f requency displ ay pr ovi des bot h LF and HF pi ctur es . T hi s di spl ay i s useful for c om p ari ng t he same pi c t ure w it h tw o di f ferent soundi ng frequenc i es. 0.
4. V IDEO S OUNDER OP ERA T ION 4-5 HF 80 42.0 MARKER-ZOOM DISPLAY Fish school Fish school This part is zoomed. Zoom marker VRM NORMAL DISPLAY 50 0 100 - - - - - - - - - - - 50 60 70 - - - - - - - - -.
4. V IDEO S OUNDER OP ERA T ION 4-6 Bott o m-lo ck d ispl ay T he bottom - l ock di splay provides a c om pr ess ed nor m al pic t ure on the ri ght hal f of t he s c r een and a 10 or 20 f eet (3 or 6 met er) w i de lay er i n c ont act w it h t he bott om i s exp anded onto the l ef t hal f of t he screen.
4. V IDEO S OUNDER OP ERA T ION 4-7 Bott om disc rimina tion display T he bottom di scri mi nat ion mode di spl ay s t he bot tom echo t o help y ou determ i ne bott om har dnes s . A bot t om dis pl ay ed w ith a s hor t echo t ail usuall y m eans i t i s a sof t, s andy bott om.
4. V IDEO S OUNDER OP ERA T ION 4-8 4.2.3 Selecting scr een split method in com bination display s On com bi nati on sounder di s pl ay s y ou can spl it the scr een vert i cal l y or hori z ont ally , usi ng t he E:SP LI T sof t key as bel ow . 0.0 LF HF 0.
4. V IDEO S OUNDER OP ERA T ION 4-9 4.3 A utomatic Sounder Operation Autom at ic s ounder oper at ion i s useful w hen y ou ar e pr eoc c upi ed w it h other t asks and do not have the ti me to adj ust t he displ ay .
4. V IDEO S OUNDER OP ERA T ION 4-10 4.4 Manual Sounder Operation M anual operati on is us ef ul f or obs er vi ng f ish s chool s and bot t om us i ng a fi xed gain s et ti ng. T he gain, r ange and r ange s hi f t func t ions us ed t ogether gi ve you the m eans t o sel ec t the depth y ou can see on t he screen.
4. V IDEO S OUNDER OP ERA T ION 4-1 1 Press t he [GA I N] key t o show the gai n w indow , and adjust the [E NT ER] knob or trac k bal l. Current l evel i s s how n on the bar , and the s et ti ng r ange i s 0-100(%) . Press t he E:RE T URN sof t key t o fi ni sh.
4. V IDEO S OUNDER OP ERA T ION 4-12 4.5 Measuring Depth, T ime T he VRM m eas ur es t he depth and the c r os s- hai r curs or , ti me. 1. Rotate t he [ ENT ER] knob t o shif t the V RM ; c ount ercl oc k w ise t o s hi ft i t dow nw ard, c l ockw i se to shi ft i t upw ard.
4. V IDEO S OUNDER OP ERA T ION 4-13 4.6 Reducing Interference I nterf er enc e f rom other ac ous t ic equi pment oper at i ng nearby or other el ectr oni c equipm ent on your boat may s how it sel f on the di s pl ay as s how n below .
4. V IDEO S OUNDER OP ERA T ION 4-14 4.7 Reducing Low Lev el Noise Light -blue dot s may appear over mos t of the s c reen. T hi s is m ai nly due to sedi m ent in t he w ater , or noi se. T his noi se can be suppr es s ed by adj us t i ng CLUT T ER on the SO UNDER SET UP menu.
4. V IDEO S OUNDER OP ERA T ION 4-15 4.8 Erasing W eak Echoes Sedi m ent s in the w ater or ref lect ions f rom pl ank t on may be p aint ed on the dis pl ay i n green or l ight bl ue. T hese w eak echoes m ay be erased as bel ow . Weak echoes Appearance of weak ec hoes 1.
4. V IDEO S OUNDER OP ERA T ION 4-16 4.9 White Marker T he w hit e marker f unc t ions t o displ ay a p art i cul ar ec ho c ol or i n w hite. For exampl e, y ou may w ant to di spl ay the bot tom echo i n w hit e to di s c r i mi nat e fi s h echoes near t he bottom .
4. V IDEO S OUNDER OP ERA T ION 4-17 4.10 Picture A dvance Speed T he pict ure advance speed determ i nes how qui c k l y t he v er t ical scan l ines r un across t he screen.
4. V IDEO S OUNDER OP ERA T ION 4-18 4.10.2 Adv ancement sy nchronized with ship’ s speed W it h s peed dat a prov i ded by a s peed- m eas ur i ng device, pi ctur e advance speed may be set acc or di ng to shi p’s s peed, the shi p’s s peed dependent mode.
4. V IDEO S OUNDER OP ERA T ION 4-19 4.1 1 D isplay Color s Y ou can sel ect t he num ber of color s and bac k gr ound col or to di spl ay as f oll ow s: 1. Press t he [ ME NU] key . 2. Press t he A : SOUNDER M ENU sof t key . 3. Select HUE, t hen pr es s t he A:E DI T sof t key t o show the hue w indow .
4. V IDEO S OUNDER OP ERA T ION 4-20 4.12 A larms T he sounder sect ion has f ive condi t ions w hich generat e audio and vis ual alar m s : bott om al arm, f ish al arm (bot tom l ock), f ish al arm (norm al ) and w ater temper at ure alar m ( t em per at ure sensor r equi red).
4. V IDEO S OUNDER OP ERA T ION 4-21 4.12.2 Bottom alar m T he bottom al arm sounds w hen the bott om ec ho i s w i t hin t he al arm range s et . T o acti v at e the bott om alar m , the depth m us t be displ ay ed. Note that the bott om alar m i s tur ned on or of f r ec i procal ly w it h the bott om alar m on t he plot t er alar m menu.
4. V IDEO S OUNDER OP ERA T ION 4-22 4.12.4 Fish alar m (B/L) T he bottom - l ock f i sh al ar m s ounds w hen a fis h ec ho i s w i t hin a predet ermi ned dis t ance from t he bot tom. Not e that t he sensi t ivit y of the fi sh al ar m c an be s et on the SO UNDER SY ST E M SET UP menu.
4. V IDEO S OUNDER OP ERA T ION 4-23 4.12.5 Water temperatur e alarm T here are tw o ty pes of w ater t em per at ure alar m s: W IT HIN RANG E and OUT OF RANGE .
4. V IDEO S OUNDER OP ERA T ION 4-24 4.12.6 W h en an alar m setting is v iolated... W hen an alarm s et ti ng has been viol ated t he buz z er s ounds and t he speaker ic on appear s i n red. P r es s t he [ CLEAR] k ey to s i lenc e t he alarm . At thi s ti me the col or of the speaker i con changes f rom red t o back gr ound c ol or .
4. V IDEO S OUNDER OP ERA T ION 4-25 A larm messag es T he t abl e bel ow show s the sounder al arm mess ages and t heir m eani ngs. Sounder alarm m essages and t hei r m eanings Messag e Meani ng DEPTH ALARM! Bottom alar m vi olated. FISH ALAR M! Fi sh alar m v iol ated.
4. V IDEO S OUNDER OP ERA T ION 4-26 4.14 Changing Pulse Repetition Rate Pul s e r epet it i on rate c an be c hanged. Normal l y , t he highest rate (20) i s used. W hen in shal low w at ers, s ec ond r ef lect ion echoes m ay appear bet w een surface and actual bott om ec ho.
4. V IDEO S OUNDER OP ERA T ION 4-27 4.15 Interpreting the Sounder Display 4.15.1 Zero line T he zero l i ne (somet imes r ef erred to as t he transmi ssi on li ne) represent s the trans duc er’s posi ti on, and moves of f t he sc r een w hen a deep phased range is used.
4. V IDEO S OUNDER OP ERA T ION 4-28 4.15.3 Fi sh school echoes Fi sh school echoes w ill general l y be pl ott ed bet w een the zero l ine and t he bott om . Usuall y t he fi s h s c hool /f i sh echo i s w eaker t han t he bottom ec ho because i t s r ef lect ion proper t y i s much s m al ler c om p ared to t he bottom .
5-1 5. CUST OMIZING YOUR UNIT T his c hapt er descri bes the vari ous opti ons w hic h al low you t o s et up your uni t t o sui t your needs . For mode- s pec i fi c menus, e. g. radar , pl otter and s ounder , make sure t hat you s el ect t he appropri at e displ ay bef ore opening one of those menus .
5. CUS T OMIZI NG YOUR UNIT 5-2 Content s of gener al s et up menu Item D escripti on Set tin gs Key Beep T urns k ey b eep on/of f. On, Off Languag e Choos es m enu lang uage. Engl ish, F rench, Ger m an, Italian, Por tugues e, S panis h Rang e Uni t C hooses unit of r ange and sp eed m easur ement .
5. CUS T OMIZI NG YOUR UNIT 5-3 5.2 Radar Setup T his p aragraph expl ains how to cust om i ze the r adar di spl ay to s ui t y our operati onal needs .
5. CUS T OMIZI NG YOUR UNIT 5-4 Content s of r adar di splay set up menu Item D escripti on Set tin gs EBL Ref erenc e Ref erenc es EBL bear ing, show n in the EBL data box, to N orth ( T r ue) or heading (R elativ e) . Relati v e wi th no heading inp ut.
5. CUS T OMIZI NG YOUR UNIT 5-5 Content s of r adar di splay set up menu ( c on’ t from previ ous p age) Item D escripti on Sett ings Backg round Colo r Choos es color s of back gr ound, rang e ri ngs and c haracter s. Eff ectiv e w hen C:H UE soft k ey i s se t for MANUA L.
5. CUS T OMIZI NG YOUR UNIT 5-6 5.2.2 Radar range setup Y ou may c hoose the radar r anges you w ish t o use, f rom the RADA R RANGE SET UP menu. Af ter choosing t he ranges desi red, change t he range w it h the [RANG E] key to ac tivate r ange setti ngs.
5. CUS T OMIZI NG YOUR UNIT 5-7 5.2.3 Function key setup T he funct ion key s provide one- touch execut ion of a desired f uncti on. T he default radar f uncti on key s etti ngs are as show n in the t able below . Function Ke y Defa ult Function Function Key Label 1 T urn heading li ne off.
5. CUS T OMIZI NG YOUR UNIT 5-8 4. Select funct ion desi red w it h the tr ackball , t hen press the C: ENT ER sof t k ey or [E NTE R] knob to r egist er your select ion. 5. Press the [ M ENU] key to cl ose the m enu. Radar func t ion key s Menu Ite m Function Function Ke y Labe l OFF Assi gns no f uncti on.
5. CUS T OMIZI NG YOUR UNIT 5-9 5.3 Plotter Setup T his p aragraph provi des the i nformat ion necess ary f or sett ing up t he plott er display . 5.3.1 Navigation options Navigati on opti ons, f or exampl e, w ay point sw it ching met hod, may be set on t he PLOT TE R SET UP m enu.
5. CUS T OMIZI NG YOUR UNIT 5-10 5.3.2 Function key setup T he funct ion key s provide one- touch execut ion of a desired f uncti on. T he default plot ter f uncti on key s etti ngs are as show n in the t able bel ow . Function Key Defaul t Function Function Ke y Labe l 1 S t ar t/stop recordi n g /plotting own ship ’s track.
5. CUS T OMIZI NG YOUR UNIT 5-1 1 4. Select funct ion desi red w it h the tr ackball , t hen press the C: ENT ER sof t k ey or [E NTE R] knob to r egist er your select ion. 5. Press the [ M ENU] key to cl ose the m enu. Plott er funct ion key s Menu Ite m Function Function Ke y Labe l OFF Assi gns no f uncti on.
5. CUS T OMIZI NG YOUR UNIT 5-12 5.4 Chart Setup T his p aragraph show s y ou how to setup di git al chart s, from of fs etti ng chart posi tion t o turni ng chart at tri butes on or of f. 5.4.1 Chart offset I n some i nst ances posi ti on may be of f by a f ew seconds.
5. CUS T OMIZI NG YOUR UNIT 5-13 5.4.2 FURUNO, Nav Chart s ™ chart attr ibutes FURUNO , NavChart s ™ chart at tri butes may be tur ned on or of f fr om the CHAR T DET A I LS menu, w hi ch y ou may di spl ay as f oll ow s: 1. Press t he [M ENU] key .
5. CUS T OMIZI NG YOUR UNIT 5-14 Content s of c har t det ai ls m enu (FURUNO , NavChart s ™ ) Item D escripti on Sett ing s Lat/Lon Gr id Lati tude and long itude g rids Red, yel low, gr een, li gh.
5. CUS T OMIZI NG YOUR UNIT 5-15 B:CNTOUR L I NE sof t key 1. Press t he [M ENU] key . 2. Press t he A: CHART SET UP and C:CHAR T DET AI LS sof t key s. 3. Press t he B:CNT OUR LI NE sof t k ey . CONTOUR LINE DEPTH < 10m RED DEPTH = 10m YELLOW DEPTH > 10m LIGHT BLUE DEPTH INFORMATION RED SPOT SOUNDING RANGE 00000-00333ft 10m = APPROX.
5. CUS T OMIZI NG YOUR UNIT 5-16 Content s of c har t det ai ls m enu (C-M AP) Item D escripti on Sett ings Waypoint W ay p oint displ ay Plotter/Ov erlay , Plotter , Off Wayp oint Name Waypoint nam e.
5. CUS T OMIZI NG YOUR UNIT 5-17 Content s of c har t det ai ls m enu for C-M AP (con’ t f rom pr ev i ous p age) Item D escripti on Set ting s Bathy m etri c Line Plotter/Ov erlay , Plotter, Off S .
5. CUS T OMIZI NG YOUR UNIT 5-18 5.5 Dat a Boxes Setup Y ou may s elect the dat a to show in the dat a boxes for the pl ott er , radar and sounder di splay s. Six box es may be displ ayed i n case of small si ze dat a box and tw o for lar ge size dat a box.
5. CUS T OMIZI NG YOUR UNIT 5-19 5.6 Hot Page Setup Si x user-arr angeable hot p ages are provi ded for qui ck sel ecti on of desi red dis play . I f the def ault hot pages ar e not to y our l iki ng you m ay change t hem as show n bel ow .
5. CUS T OMIZI NG YOUR UNIT 5-20 4. Rot ate the [ ENT ER] knob t o selec t a mai n screen, t hen press t he [ENT ER] knob. F or exampl e, sel ect t he radar dis play .
5. CUS T OMIZI NG YOUR UNIT 5-21 NAV SETUP * For GPS receiver other than GP-310B/320B. POSITION SOURCE ALL SPEED AVERAGING* 0060second(s) LOCAL TIME OFFSET* +00:00 TEMP CALIBRATION +00.
5. CUS T OMIZI NG YOUR UNIT 5-22 5.7.2 GPS receiv er setup (Set equipped with GP-310B /320B) T he GPS S E T UP menu s et s up t he GP Receiver G P - 310B / 320B . Press t he [MENU] k ey follow ed by the E:SY STEM CONFIGUR A TI ON, B :NA V OPTI ON and B:G PS SENS O R SET T I NGS sof t key s to di splay thi s menu.
5. CUS T OMIZI NG YOUR UNIT 5-23 Content s of G PS set up m enu (con’ t from previ ous p age) Item D escripti on Sett ings Posi tion Sm oothing W hen t he DOP or rec eiv ing conditi on is unf av orab le, the GPS f ix m ay chang e gr eatly , ev en if the v essel i s not m ov ing .
5. CUS T OMIZI NG YOUR UNIT 5-24 Content s of G PS set up m enu (con’ t from previ ous p age) Item Descr ipti on Sett ings Disable Sa tellite Every GPS sate llite is br oadcasti ng ab norm al s ate .
5. CUS T OMIZI NG YOUR UNIT 5-25 W AAS S E T U P Press the C:W AAS SET UP sof t key t o show the W AAS SET UP di spl ay . Note: T his f uncti on requir es t he GPS r ec ei ver GP-320B . Content s of W AAS SET UP menu I tem Desc ription Settings WAAS M ODE Selec t ON to use the WAAS mode.
5. CUS T OMIZI NG YOUR UNIT 5-26 5.7.3 TD display setup T he T D SE TUP menu set s w hich Loran C or Decca chai n to use to di spl ay T D posi tion. (Connecti on of a Loran C or Decca navigator is not necessary to dis play T D posi ti on.) 1. Press t he [M ENU] key .
5. CUS T OMIZI NG YOUR UNIT 5-27 6. If necessary , you m ay ent er a posit ion of f set to r efine Lor an C posit ion accurac y . Sel ect ( GRI ) CORRECT IO N 1 or CORRECT IO N 2, then pr ess the A:E DIT sof t k ey . Ent er correct ion value w ith t he track ball and alphanumeri c key s.
5. CUS T OMIZI NG YOUR UNIT 5-28 5.8 Nav Dat a Disp la y Setup T he nav data di splay show s v ar ious navigat ion dat a, f ed from a navi gator , netw ork equipment , etc . Y ou may s elect the dat a to di splay and w here to di spl ay it as fo ll o w s: 1.
5. CUS T OMIZI NG YOUR UNIT 5-29 5.9 Sounder Setup T his s ec t ion show s you how to cust om i ze y our netw ork sounder to y our l iki ng. Y ou can set f i sh al ar m s ensi ti vity , fi ne t une sensors, etc. 5.9.1 Sy stem setup 1. Show the sounder di spl ay , t hen press t he [ ME NU] key .
5. CUS T OMIZI NG YOUR UNIT 5-30 Sounder system setup m enu descripti on (con’ t fr om previous p age) Item D escripti on Sett ings Echo Offs e t (HF , L F) If the on-sc reen echo l evel app ears t .
5. CUS T OMIZI NG YOUR UNIT 5-31 5.9.2 Sensor setup T he SENSO R SET UP menu let s y ou furt her refi ne speed, w ater tem perature and depth dat a fed f rom the net w ork sounder .
5. CUS T OMIZI NG YOUR UNIT 5-32 5.9.3 S ounding range, zoom range, bottom lock range T his p aragraph show s y ou how to set c ust om ranges f or bas i c range, z oom range (mar k er and bot t om zoom) and bot tom l ock range. Al l def ault bas i c ranges are rest ored w henever the uni t of depth m eas ur ement is changed.
5. CUS T OMIZI NG YOUR UNIT 5-33 5.9.4 Function key setup T he funct ion key s provide one- touch execut ion of a desired f uncti on. T he default sounder f uncti on key s etti ngs are as show n in the t able bel ow . Function Key Defaul t Function Function Ke y Labe l 1 Outp ut cur rent p ositi on .
5. CUS T OMIZI NG YOUR UNIT 5-34 5. Select funct ion desi red w it h the tr ackball , t hen press the C: ENT ER sof t k ey or [E NTE R] knob to r egist er your select ion. 6. Press the [ M ENU] key to cl ose the m enu. Sounder f unc t ion key s Menu Ite m Function Function Ke y Labe l OFF Assi gns no f uncti on.
6. DA T A TRANSF ER 6-1 6. DA T A TRA NSFER T his c hapt er provides i nform at ion f or s aving and r epl ay i ng dat a to and f r om memory cards , uploadi ng and dow nloadi ng dat a, loadi ng w ay poi nt dat a fr om Y eoman, and output ti ng dat a through the net w ork.
6. DA T A TRANSFER 6-2 6.1.2 Saving dat a to a mem ory card 1. Inser t a form atted memo ry card i nto th e slot. 2. Press t he [M ENU] key fol l ow ed by t he E : SY ST EM CONF I G URAT I ON, D:DAT A T RANSFER, A:SAVE/ LOAD DAT A and C:SAVE DAT A T O M E M ORY CARD soft key s to show the SAVE DAT A menu.
6. DA T A TRANSFER 6-3 Memory card messag es V arious m em or y card m ess ages appear t o alert you t o memory card-r el ated error . T hese are t abul at ed below . M em ory c ar d m essages Messag e Reason Rem edy Memory ca rd is no t ins erted. Pleas e inser t m e mory ca rd .
6. DA T A TRANSFER 6-4 6.1.3 Play ing back dat a fr om a mem ory card Dat a (trac k , marks, li nes, w aypoi nt s, routes and s et ti ng dat a) can be loaded f r om a memory card and di spl ay ed on the s c r een.
6. DA T A TRANSFER 6-5 6.2 Receiv ing Dat a V ia Netw ork Equipment Y ou can recei ve w ay point s, r out es, mar k s and l ines f rom NavNet equipm ent . 1. Press t he [M ENU] key . 2. Pre ss t he E:SY STEM CONFIG URA TI ON soft key . 3. Pre ss t he D:DA T A TRANSFER sof t key .
6. DA T A TRANSFER 6-6 10. Pr es s t he B:RCV s of t key fol l ow ed by t he [ENT ER] knob. T he message “S T ART RECEI VI NG DA T A VI A NET W O RK . ” is di spl a y ed. I f no dat a coul d be f ound, the mes sage “ ( HO ST NAME ) ’ IS NO T FO UND.
7-1 7. M A INTENA NCE, TROUBLESHOOTING T his c hapt er provides i nform at ion neces s ar y for keepi ng y our unit in good w orki ng order and remedy i ng s i mpl e pr obl ems. WARNING WARNING Do not open the equipment. Hazardous voltage which can cause electrical shock exists inside the equipment.
7. MAINTENANC E, TROUBLESHOOTING 7-2 7.2.2 R eplace m ent of the fuse T he fuse on t he pow er cable pr ot ect s the equi pment f r om reverse pol ari t y of the shi p’ s mai ns and equipm ent faul t . I f t he f use blow s, fi nd out t he c ause bef ore repl ac i ng it .
7. MAINTENANC E, TROUBLESHOOTING 7-3 7.3 T rackball Maintenance I f the c ur s or s k i ps or m oves abnormal ly , y ou m ay need to c l ean the t r ac k bal l.
7. MAINTENANC E, TROUBLESHOOTING 7-4 7.4 Simple T roubleshooting T his s ec t ion provi des s i mpl e t roubles hoot ing proc edures w hich t he us er c an fol low to restor e nor m al operati on. I f y ou cannot r es t ore normal operati on do not att em pt to check i nsi de t he unit .
7. MAINTENANC E, TROUBLESHOOTING 7-5 7.4.3 Plotter Requir es G PS Recei ver GP-310B/ GP-320B . Plott er troubles hoot ing If… Then… pos iti on is not f ixed w ithi n three m inut es • chec k that antenna connec tor is fi rm ly f astened. • ch eck n umber of sat ellite s rec e ived, o n t h e GP S st at us d isplay .
7. MAINTENANC E, TROUBLESHOOTING 7-6 7.4.4 Sounder Requir es Net w ork Sounder E T R-6/10N/30N. Sounder t r oubles hoot ing If… But… Then… you selec ted a sounder dis play w ith the D ISP key p ic ture does not ap pear • chec k that the netw or k sounder ’s si gnal cabl e is f ir m ly f astened.
7. MAINTENANC E, TROUBLESHOOTING 7-7 7.5 Diagnostics T his p aragraph provi des t he procedures f or test ing t he equi pment f or proper operati on. F our t est s are provided: Mem or y I /O t est, K ey board t es t , Remot e contr ol ler t est, and T est p atter n.
7. MAINTENANC E, T R OUBLESHOOTING 7-8 Proces sor u n it test Press the A:PROCESSOR U NI T TES T soft key at the M E M ORY I/O TEST menu to t est t he pr oc es s or uni t. T he equipment di splay s progr am versi on number and ch ecks devices. Res ult s f or dev i c e checks are show n as OK or NG (No Good) .
7. MAINTENANC E, TROUBLESHOOTING 7-9 Ne tw ork s ounder t est ( Require s Ne tw ork Sounder E TR- 6/10N , ETR -30 N) Press t he C:NET W ORK S O UNDER T EST sof t k ey at t he ME M O R Y I / O T E S T menu to t est t he Net w ork Sounder E T R-6/10N or ET R-30N.
7. MAINTENANC E, TROUBLESHOOTING 7-10 7.5.2 T est p attern T he test p at t ern test checks the di splay for proper displ ay of col ors. 1. Press the [ M E NU] key t o show the menu. 2. Press the E:SY ST EM CONFI GURA T IO N sof t key . 3. Pre ss t he C:SY ST EM SET UP sof t key .
7. MAINTENANC E, TROUBLESHOOTING 7-1 1 7.5.3 Key board test of the contr ol unit T he keyboard t est checks the cont rol s on the cont rol unit f or proper operat ion. 1. Press the [ M E NU] key t o show the menu. 2. Pre ss t he E:SY STEM CONFIG URA TI ON soft key .
7. MAINTENANC E, TROUBLESHOOTING 7-12 7.6 GPS S t atus Display T he GPS s t atus dis pl ay pr ovi des dat a about the GP S s at e llite s. It is av aila ble w i t h c onnec t ion of t he GPS Rec ei ver GP-310B / 320B or a GP S navi gat or output t ing t he dat a sentence GS A or GSV .
7. MAINTENANC E, TROUBLESHOOTING 7-13 7.7 Clearing Memories Y our equipment has a memory for eac h of the pl ot ter , radar and s ounder sect i ons. T hese memori es can be cl eared to r es t art operati on w it h defaul t settin gs.
7. MAINTENANC E, TROUBLESHOOTING 7-14 7.8 Error Messages I n addit i on to al arm mess ages y our equi pment al so dis pl ay s er r or m ess ages . Error m essages Erro r Message Meanin g Rem edy Connec ti on w it h the E TR w as cut. Netw or k sounder disconnec ted.
A P-1 A PPENDIX Menu Ov erv iew MENU key Radar MENU Key EBL REFERENCE (TRUE, RELA TIVE ) CURSOR POSITION (LA T/LON, TD, RNG&BRG-REL , RNG&BRG-TRUE) TUNING ( AUTO , MAN) TX SECTOR BLANKING (ON .
APPEND IX AP -2 A:GENERAL SETUP A:NA V SOURCE SETTINGS B:NA V OPTION E:SYSTEM CONFIGURA TION POSITION SOURCE (FURUNO BB GPS, GP , LC, ALL ) SPEED A VERAGING (0-9999 seconds, 60 seconds ) LOCAL TIME OF.
APPEND IX A P-3 A:PORT SETUP 2 4 C:SYSTEM SETUP 3 B:SELECT SNTNC soft ke y* A:GPS/NMEA PO RT FURUNO GPS SENSOR (YES, NO ) OUTPUT FORMA T (NMEA 0183 V er .1.5, 2.0 ) LA T/LON FORMA T (DD ° MM. MM ’ DD ° MM. MMM ’ DD ° MM. MMMM ’ ) OUTPUT DESTINA TION (YES, NO ) D:OUTPUT THROUGH NETWORK (Select data sentences to output to NavNet equipment.
APPEND IX AP -4 3 4 B:TEST & CLEAR A:MEMORY I/O TEST C:HOT P AGE & NA V DISP SETUP A:HOT P AGE SETUP (Configures HOT P AGE 1 to 6.) RADAR (SIMULA TION 1, SIMULA TION 2, LIVE ) PLOTTER ((S IM UL A TI ON, LIVE ) SOUNDER (S IM UL A TI ON 1, SIMULA TION 2, LIVE ) SPEED (0.
APPEND IX A P-5 Plotter MARKS/LINES COLOR (RED, YELLOW , GREEN, LIGHT BLUE, PURPLE, BLUE, WHITE) MARKS SHAPE ( ) LINES STYLE ( ) MARKS SIZE ( LARGE , SMALL) MENU Key A:CHAR T OFFSET (of fsets chart position.
APPENDIX AP-6 W A YPOINT ( PLOTTER/OVERLA Y , PLOTTER , OFF) W A YPOINT NAME ( PLOTTER/OVERLA Y , PLOTTER , OFF) LA T/LON GRID ( PLOTTER/OVERLA Y , PLOTTER , OFF) CHART BORDER LINE ( PLOTTER/OVERLA Y .
APPEND IX A P-7 E:SYSTEM CONFIGURA TION (Same items as on page AP-2.) D:CREA TE VOY AGE- BASED ROUTE SOFT KEY 1 - SOFT KEY 5 (OFF , ADD NEW WPT , MOVE WPT , RULER, GOTO WPT , GOTO ROUTE, EDIT MK/LINE, TRACK ON/OFF , TTM ON/OFF , DEL TGT TRK, ALPHA LIST , LOCAL LIST , ROUTE LIST , D.
APPEND IX AP -8 Sounder MENU Key NOISE LIMITER ( OFF , LOW , MEDIUM, HIGH) CLUTTER (0-16, 05 AUTO ) WHITE MARKER (1-8 (8-color), 1-16 (16 color), OFF ) ZOOM MARKER ( ON , OFF) HUE (1-9, 1 ) SIGNAL LEV.
APPEND IX A P-9 EXT VIDEO (Same items as on page AP-2.) MENU Key E:SYSTEM CONFIGURA TION ALAR M k ey Radar A larms A:SET GUARD 1 (ERASE GUARD 1) C:SET GUARD 2 (ERASE GUARD 2) ALARM key Plo tter A larms AUDIO ALARM (INT & EXT BUZZ, INTERNAL BUZZ , OFF) ARRIVAL ALARM (ON, OFF , default range: 0.
APPEND IX AP-10 Geodetic Char t List 001: W G S84 002: W G S72 003: TOKYO : Mean V alue ( Japan, Korea, and Okinaw a) 004: NORT H AM ERICAN 1927 : M ean V alue ( CONUS) 005: EURO PEAN 1950 : M ean V a.
APPEND IX A P-1 1 Wor ld Tim e C ha rt offered by Busse-Yachtshop.de.
APPEND IX AP-12 Icons Icon Me aning Nort h marker . Points to North. Cor rect char t and suitabl e scale - f ul l chart r eliab ility. Char t overenl arged. Char t card not inser ted. W rong chart c ard inser ted. Char t scale too sm all. Plotter , radar, s ounder alar m setting v iolated.
APPEND IX A P-1 3 What is W AA S? WAAS, av ail able i n N orth America, i s a prov i de r i n the worl dw ide SBAS (Sate llite Based Augmentat ion Sy stem) navigati on syst em. SBAS prov i des GPS signal corrections to SBAS users, for ev en better po si tion accuracy , typi cal l y better than three met ers.
This page is intentionally left blank . offered by Busse-Yachtshop.de.
SP - 1 SPECIFICA TIONS OF MARINE RADAR MODEL 1800C-BB/1900C-BB SERIES 1 GENERAL 1.1 Range, Pulse length (PL) & Pulse Repetition Rate (PRR) Range (nm) Pulse length ( µ s) PRR (Hz approx.
SP - 2 -23 dB or less ( ± 20° of main-lobe or more) 2.3 MODEL1933C-BB: 2.3.1 Radiator Slotted waveguide array 2.3.2 Polarization Horizontal 2.3.3 Antenna Rotation 24 or 48 rpm nominal High brilliance monitor: 24 rpm nominal only 2.3.4 Radiator Length 100 cm (XN10A) 2.
SP - 3 3.3 Modulator FET Switching Method 3.4 Intermediate Frequency 60 MHz 3.5 Tuning Automatic or manual 3.6 Receiver Front End MIC (Microwave IC) 3.7 Bandwidth Tx pulselength 0.08 µ s and 0.3 µ s: 25 MHz Tx pulselength 0.8 µ s: 3 MHz 3.8 Duplexer Circulator with diode limiter 3.
SP - 4 5.9 Electronic Chart FURUNO chart card or NAVIONICS chart card available C-MAP chart card also available for C-MAP NT Model 5.10 Alarms Arrival and Anchor watch, Cross track error and proximity alarms, Ship’s speed in and out alarms, Water temperature, Trip alarm, Fish alarm, Bottom alarm (ETR required) 6 POWER SUPPLY 6.
SP - 5 SPECIFICA TIONS OF VIDEO PLOTTER GD-1900C-BB 1 PLOTTER FUNCTION 1.1 Projection Mercator 1.2 Usable Area 85 latitude or below 1.3 Position Indication Latitude/longitude, Loran C LOP or DECCA LOP 1.4 Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area) 1.
SP - 6 3.2 Rectifier (option) PR-62: 100/110/220/230 VAC, 1 phase, 50/60 Hz 4 ENVIRONMENTAL CONDITION 4.1 Ambient Temperature -15°C to +55°C 4.2 Relative Humidity 93 % ± 2% at +40°C 4.3 Waterproofing Processor Unit: IPX 0 Control Unit: IPX5 (Front panel), IPX2 (Rear panel) 4.
Index-1 INDEX A A/C R A IN ...................................................... 2-5 A/C S EA ....................................................... 2-4 ACQ s o ft ke y............................................... 2-3 6 ALARM key plotte r ........
IND EX Index-2 Color s radar di splay ............................................. 5-5 radar ec hoes ............................................. 5-5 sounder ec hoes ...................................... 4-19 Co m pa ss d i sp l ay ................
IND EX Index-3 Hot page setup ........................................... 5-1 9 Hue radar , pl otter .............................................. 1-6 sounder .................................................. 4- 19 I I. RE J. s of t key ............
IND EX Index-4 Por t, por t se rv ices icon s ....................................................... 3-1 3 na vigatin g to ........................................... 3- 46 Posit ion offset (GPS Receiv er GP- 310B ) ..... 5- 23 Posit ion sm oot hing (G PS Recei v er GP- 310B) .
IND EX Index-5 T rack dis play i ng o ther t arge ts '........................... 3- 19 dis play i ng o w n s hip's............................... 3-18 era s i ng a ll ow n s hip ' s .............................. 3-2 4 era s i ng a ll ta rge ts ' .
offered by Busse-Yachtshop.de.
offered by Busse-Yachtshop.de.
offered by Busse-Yachtshop.de.
デバイスFuruno 1933C-BBの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Furuno 1933C-BBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFuruno 1933C-BBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Furuno 1933C-BBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Furuno 1933C-BBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Furuno 1933C-BBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFuruno 1933C-BBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Furuno 1933C-BBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFuruno 1933C-BBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
