AltinexメーカーMT115-110の使用説明書/サービス説明書
ページ先へ移動 of 20
MULTITASKER ® MANUAL PART NUMBER: 400 - 0433 - 00 3 COMPUTER/COMPONENT VIDEO + AUDIO, DUAL TWISTED PAIR TRANSMITTER USER’S GUIDE MT115 - 110.
MULTITASKER 400 - 0433 - 00 3 1 TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WA RNINGS ................ 2 GENERAL .......................................................... 2 HANDLING ........................................................ 2 CLEANING .
MULTITASKER 400 - 0433 - 00 3 2 PRECA UTIONS / SA FETY WA RNINGS 1 Please read this manual carefully before using your MT115 - 110 and keep it handy for future reference. These safety instructions are to ensure the long life of your MT115 - 110 and to prevent fire and sho ck hazards.
MULTITASKER 400 - 0433 - 00 3 3 AB OUT YOUR MT115 - 110 2 MT115 - 110 Computer/Component Video + A udio , Dual Twisted Pair Transmitter The MT115 - 110 provides a means of transmitting computer or com.
MULTITASKER 400 - 0433 - 00 3 4 PRODUCT DESCRI PTION 4 VIDEO EQUALIZATION FOR INPUT 2 AUDIO INPUT 2 4TP OUTPUT 1 4TP OUTPUT 2 BOTTOM RETAINER SCREW AUDIO INPUT 1 RGBHV/YPbPr TOP RETAINER SCREW VIDEO E.
MULTITASKER 400 - 0433 - 00 3 5 AP PLICA TION DI AG RA MS 5 DIA GRA M 1 : TYPICA L SETUP MT115-110 TP115-111 TP115-111.
MULTITASKER 400 - 0433 - 00 3 6 DIA GRA M 2 : INTERNAL VIEW MP POWER GREEN PLUG and PLAY BLUE RED VER HOR GREEN DETECT SIGNAL PAIR 4 PAIR 2 PAIR 3 PAIR 1 PAIR 4 PAIR 2 BLUE RED VER HOR MT115-110 PAIR 3 PAIR 1 VIDEO 15-PIN HD VIDEO 15-PIN HD 4TP 4TP SYNC PROCESSING SYNC PROCESSING PLUG and PLAY AUDIO 3.
MULTITASKER 400 - 0433 - 00 3 7 DIA GRA M 3 : SWITCH SETTINGS EQ2 SW3 GAIN2 SW5 EQ1 GAIN1 SW4 SW6 Set SW6 to SW for software control and HW for a fixed gain = 1. Set SW5 to SW for software control and HW for a fixed gain = 1. Set SW4 to SW for software control and HW for hardware control.
MULTITASKER 400 - 0433 - 00 3 8 INSTA LLING YOUR MT115 - 110 6 Step 1. Determine the approp riate switch settings using Diagram 3 on page 7. Step 2. Turn off power to the MultiTasker system and disconnect from AC power. Step 3. Remove a slot cover (MT200 - 101) from one of the unused slots.
MULTITASKER 400 - 0433 - 00 3 9 7.2 DESCRIPTION OF COMMA NDS Each command consists of three parts: Function, Card ID, and Unit ID. [ Function , Card ID , Unit ID ] Example: [VERC3U2] VER= Function C3 = Card ID or Group ID U2 = Unit ID (optional for Unit ID 0) For Function, see a detailed explanation under each command description.
MULTITASKER 400 - 0433 - 00 3 10 3. [CnS] This command saves the card settings and displays the status. After the system is reset or powered off and on, the settings are restored. Cn = card number S = save configuration Example: Save the status by sending [C4S] .
MULTITASKER 400 - 0433 - 00 3 11 6. [ST A1 ] This command enables automatic feedback from the front panel. The command affects any card with auto - feedback capability, not just the MT115 - 110 . The default at power on or reset is STA0, off. For more details, see the [?Cn] command definition.
MULTITASKER 400 - 0433 - 00 3 12 Example: Set the equalization on Input 2 of C3 to a value of 32 by sending the command [EQ2=32C3]. The card will respond with feedback of “[ ]” once the command is executed. 12. [G AI N] This command displays the g ain setting for an input and selects that input for adjustment using the [+] and [ - ] commands.
MULTITASKER 400 - 0433 - 00 3 13 ID COMMANDS The default card ID is the same as the card slot number. The next several commands allow the user to change the card ID to a value other than the slot number. Once the ID is changed, moving the card to another slot will not change the card ID.
MULTITASKER 400 - 0433 - 00 3 14 20. [SID+] This command sets the card ID of all the cards in a system to their slo t number plus the offset value. Command Format: [ SID+n ] n = Offset amount (n = # from 0 to 99) The maximum card ID is 99, so subtract the highest slot number from 99 to find the maximum offset.
MULTITASKER 400 - 0433 - 00 3 15 Example: G5 consists of the C2, C4, and C6. Remove only C4 and C6 from the group by sending the command [RMC4C6G5] . The system will return the following feedback: [G5=C2] 24. [RMG] This command may be used to delete an entire group, or all groups.
MULTITASKER 400 - 0433 - 00 3 16 Group Commands 22) [WR] Group multiple cards 23) [RMC] Remove members from group 24) [RMG] Delete group 25) [RD] Display group members 7.4 MENU MODE Menu Mode commands allow virtually the same functionality as p rogramming commands.
MULTITASKER 400 - 0433 - 00 3 17 7.4.4 MT115 - 110 MENUS Following are the menus available to the MT115 - 110 . The first menu is the Main Menu only. The second listing is an expanded view of the card’s sub - menus. The expanded menu contains values that indicate t he current setting or value of a parameter.
MULTITASKER 400 - 0433 - 00 3 18 7.4.5 MENU MODE EXA MPLES All Menu Mode examples assume an MT115 - 110 is installed in slot 3 . Start by clicking the mouse in the Terminal W indow.
MULTITASKER 400 - 0433 - 00 3 19 Cause 2: Signal is bad or missing. Solution 1: Make sure the output is connected to the TP receiver. If there is still no display, see Solution 2. Solution 2: Bypass the MT115 - 110 and TP receiver and connect the output of the source directly to the monitor.
デバイスAltinex MT115-110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Altinex MT115-110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAltinex MT115-110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Altinex MT115-110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Altinex MT115-110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Altinex MT115-110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAltinex MT115-110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Altinex MT115-110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAltinex MT115-110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。