GEメーカー28129xx6の使用説明書/サービス説明書
ページ先へ移動 of 68
.
Y our telephone equipment is approved for connection to the Public Switched T elephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical R equirements for T elephone T erminal Equipment published by ACT A .
3 The telephone company may make changes in its communications facilities, equipment , operations or procedures wher e such action is requir ed in the operation of its business and not inconsistent with FCC Rules and Regulations.
4 This telephone system meets FCC standards for Hearing Aid Compatibility.
5 E quipmEnt A pprov Al i nformAtion ................. 2 i ntErfErEncE i nformA tion ............................. 3 H EAring A id c ompA tibilit y (HAc) ................. 4 l icEnsing .............
6 l eaVing a m essage ......................................... 32 s Creening C alls from the B ase ................... 32 m emorY f ull ................................................... 32 m essage P laYBaCk ........................................
7 a DDing the P hone B ook e ntries i n D esireD g rouP ................................ 50 D eleting the P hone B ook e ntries i n D esireD g rouP ..................................... 50 s et g r ouP r ing .
8 .
9 For there will be additional handset , charge cradle, belt clip, battery pack and cover than shown. For there will be additional handsets, charge cradle, belt clips, battery packs and covers than shown.
10 • Avoid sources of noise and heat , such as motors, uorescent lighting, microwave ovens, heating appliances and direct sunlight . • Avoid areas of excessive dust , moisture and low temperature.
11 .
1 .
13 .
14 . Install 4 AAA-size alkaline batteries (not included) for back up power in the event of a power failure. • Press the tab to open the battery compartment door located on the back of the phone. • Insert the batteries as shown on the diagram inside the batter y compartment .
15 4. Plug the AC power conv erter into the electrical outlet and the DC connector into the jack on the bottom of the base. 5. Place the handset in the base cradle.
16 1. Make sure your base is (not in talk mode). . Press the Menu (SKL) button to enter the main menu. 3. Use the or button to scr oll to Phone Settings . 4. Press the Select (SKL) button to enter the submenu. 5. Use the or button to scroll to Language .
17 The base and/or handset menus give you access to all of the built -in features.
18 3. Use the or button to select On or Off . The default setting is On . 4. Pre ss th e Sel ect (SKL ) but ton t o sav e yo ur se lecti on. Y ou wi ll he ar a voice ann ounce ment of co nrma tio n. Y ou can access the answering system from a tone-dial telephone in another (remote) location.
19 .
0 Alarm On 1. Use the or button to scroll to Snooze: Off . . Press the Select (SKL) button to enter the menu. Snooze On/Off shows on the display. 3. Use the or button to select from Off, Every 5 minutes, Every 10 minutes, Every 15 mintues, or Every 30 minutes .
1 This menu allows you to change the language of the display and voice pr ompts on the base. Phone Settings 1. Use the or button to scroll to Language . . Press the Select (SKL) button to enter the menu.
Phone Settings 1. Use the or button to scroll to Tone/Pulse . . Press the Select (SKL) button to enter the menu. 3. Use the or button to select Tone or Pulse . The default is T one .
3 Y ou may choose from the 5 preset melodies and 10 dual-tone ringer tones. .
4 This unit supports a maximum of two Bluetooth cell phone devices. To use y our Bluetooth cell phone device with the 819 system, .
5 3. Use the or button to scroll to desired device. 4. Press the Select (SKL) button to select . 1. Use the or button to scroll to Edit Name . . Press the Select (SKL) button to conrm, use the number keys to enter the cell phone name (maximum 15 characters).
6 5. Use the or button to scroll to On or Off . 6. Press the Select (SKL) button to save your selection. Y ou will hear a conrmation tone. .
7 1. Use the or button to scroll to Alarm Melody . . Press the Select (SKL) button to enter the menu. 3. Use the or button to select desired melody.
8 If you enter your local 3-digit ar ea code in the area code menu, your local area code does not display on the Caller ID (CID) list .
9 Phone Setting 1. Use the or button to scroll to Registration . . Press the Select (SKL) button to enter the menu. 3. Use the or button to scroll to No or Y es .
30 3. Press and hold the MUTE button on the base while plugging in the DC connector until the base displays Initialization and then Deregister All Handsets .
31 . Press the Select (SKL) button to enter the menu.
3 There ar e several ways to activate/deactiv ate the answerer ; press.
33 The message counter and the base mailbox button/indicators (PLAY ST OP 1/ PL A Y STOP / PLA Y STOP 3) let you know when you hav e message(s) or new message(s). To play the messages, press the corr esponding mailbox button (PLAY ST OP 1/ PLAY ST OP / PLAY ST OP 3).
34 4. Press the DELETE button or 0 key on the handset to erase a message during playback. This feature allows you to r ecord a memo to store as an incoming message.
35 . Enter the security code during the outgoing announcement or after you hear the tone. 3. Follow the voice menu to use the answering system ’s remote functions. When answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the 3-digit security code.
36 Press the SPEAKER button on the base to activate the speakerphone. Use the VOL UME ( 5 or 6 ) buttons to adjust speaker volume on the base to a comfor table level. VOL1 is the minimum speaker v olume and VOL8 is the maximum.
37 Press and hold the number k ey to get the corresponding speed dialing number , then press Cell (SKR) button. .
38 During a cellular call, if you receiv e an incoming landline call. 1. Press the Line (SKR) button to answer the incoming call and the cellular call will be on hold.
39 • This feature allows you to cr eate a 3-way conversation, please refer to Intercom Operation section of this manual for details.
40 1. During the call, press T ALK or SPKR on the handset or SPE AKER on the base to join the ongoing call.
41 1. Press the button rst , then use the or button to select the desired redial number .
4 This feature allows you to turn off all the handset ringer(s) at once, by pr essing one button at the base unit , even though the ringer volume of handset(s) has been pr eset . 1. In the standby mode, press the DO NOT DISTURB button on the base.
43 Various Caller ID err or messages may appear on the display. Refer to the Display Messages section of this User ’s Guide for more information.
44 .
45 4. Use the or button to scroll to the desir ed CID recor d. 5. Press the More (SKL) button. 6. Use the or button to scroll to Store. 7. Press the Select (SKL) button. 8. The CID number shows on the display. Refer to "Adding Phone Book Entries" section to save the recor d.
46 4. Press the or button to scroll to the recor ds for desired recor d. 5. Press the More (SKL) button to see more options. 6. Press the or button to select Format or Store . 7. Press Select (SKL) button to conrm the option. (If Store is selected, please refer to the Phone Book section of this manual for detailed information.
47 3. Press the Select (SKL) button to enter the phone book . Add Record 4.
48 Store a dialed number when r eviewing it: 1. Make sure the phone is (not in talk mode). . Press the button on the handset to access the Dialed Calls menu.
49 1. When reviewing the phone book records list , use the the or button to scroll to the desired r ecord or enter the rst character of name for alphabetical search.
50 6. Press the Select (SKL) button and use the or button to select desired group . 7. Press Select (SKL) button to conrm. Gr ouping 1.
51 6. Press the Select (SKL) button and use the or button to select desired location. (Up to 10 locations, 0 to 9) 7. Press Select (SKL) button to conrm. 1.
5 In the Extra Features Menu, ther e are thr ee programmable submenus: Room Monitoring, Intercom and Push to T alk . 1. Make sure your base or handset is (not in talk mode). . Press the Menu (SKL) button to enter the menu.
53 4. The receiving handset is paged and emits a tone. .
54 7. Use the or button to desired handset or base. The default setting at base is HANDSET 1 and the default setting at handset is B ASE . 8. Press the Select (SKL) button to save your selection. 9. Press and hold the PUSH TO T ALK button to connect with the desired handset or base.
55 1. Use the or button to scroll to . . Press the Select (SKL) button to enter the menu. 3. Use the or button to select Once, Daily, Weekly, Monthly , or Yearly .
56 3. Use the or button to select the desired record and pr ess the Select (SKL) button to view the recor d details. 4. Press the Option (SKL) button to enter the option menu. 5. Use the or button to scroll to Delete Reminder . 6. Press the Option (SKL) button to enter the menu.
57 NOTE: The RBRC seal on the battery used in your Thomson Inc. product indicates that we are participating in a program to collect and recycle the rechar geable battery (or batt eries). For more information go to the RBRC web site at www .rbrc.org or call 1-800-8-BA T TERY or contact a local recycling center.
58 Caller information is interrupted during transmission or the phone line is excessively noisy. Displays on handset while the line is in use. Indicates CID recor d is from a long distance call.
59 No dial tone • Check and repeat installation steps: Ensure the base power cor d is connected to a working electrical outlet .
60 • Your Bluetooth cell phone device may be too close, mov e it to a distance of feet to 10 feet from the base. • Charge the battery. Unit beeps • Clean charging contacts on cordless handset . • See solutions for “No dial tone” . • Replace the battery.
61 No Display • Charge the battery (for 16 hours). Or replace the battery. • Make sure that the unit is connected to a non-switched electrical outlet . Disconnect the power adaptor and remove the back up batteries fr om the base.
6 To k eep your unit working and looking good, follow these guidelines: • Avoid dropping the handset , as well as other r ough treatment to the phone. • Clean the phone with a soft cloth.
63 • Defects in materials or workmanship. • One year , from date of pur chase.
64 • Please complete and mail the Product Registration Car d packed with your unit . It will make it easier to contact you should it ever be necessary. The return of the car d is not required for warranty coverage.
65 Accessory Information 64 Adding a Reminder 54 Adding Phone Book Entries 46 Adding the Phone Book Entries In Desired Group 50 Adding the Speed Dialing Number 50 Alarm 19, 5 Answerer 17 Answer.
66 Handset Layout 11 Handset Layout (Side Views) 10 Handset Name 8 Handset Sound Signals 58 Handset to Handset Intercom Call 5 Hearing Aid Compatibility (HAC) 4 Important.
67 Reviewing Phone Book Records 48 Reviewing the Announcement 16 Ringer Tone 3, 31 Ringer Volume 3, 31, 41 Rings to Answer 18 Room Monitoring 5 Scheduler 54 Screening Calls from the Base .
Model 819 0005374 (Rev . 1 Dom E) 08-09 Printed in China 101 West 103rd St . Indianapolis, IN 4690-110 © 008 Thomson Inc.
デバイスGE 28129xx6の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GE 28129xx6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGE 28129xx6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GE 28129xx6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GE 28129xx6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GE 28129xx6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGE 28129xx6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GE 28129xx6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGE 28129xx6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。