GEメーカーA1035の使用説明書/サービス説明書
ページ先へ移動 of 106
EN User Manual A Series A950 / A1050 / A1250 / WM1050 / A1035 / A1235 Digital Still Camera E Series E1255W GETTING READY BASIC OPERATION USING THE MODES PLAYBACK USING THE MENUS CONNECTIONS APPENDICES.
.
i This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.
ii ii 1 SAFE T Y PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.
ii 1 BEFORE YOU ST ART Preface Thank you for purchasing GE digital cameras. Please read this manual carefully and keep it in a safe place for future refer ence.
2 3 • Do not expose the camera to moisture, or extreme temperatures. Extreme environments may shorten the life of your camera or damage the batteries. • Do not use or store the camera in dusty, dirty, or sandy areas, as its components may be damaged.
2 3 3 WARNING SAFETY PRECAUTIONS BEFORE YOU START ............................................. 1 Preface .............................................................................. 1 Copyright ......................................................
4 Quality .................................................................... 27 Size .......................................................................... 28 Color ....................................................................... 29 USING THE MODES .
5 PLAYBACK ........................................................... 47 Viewing photos and videos ....................................... 47 Editing video ......................................................... 49 Thumbnail view ..................
6 6 7 Beep ........................................................................ 69 LCD Brightness ..................................................... 69 Power Saver .......................................................... 70 Date/Time ........
6 7 GET TING READY Your package should contain the camera model you pur chased along with the following items. If anything is missing or appears to be damaged, please contact your vendor . The accessories will vary based on model purchased and are noted below .
8 9 Front View Camera views : A Series Back View Right View 1 2 3 4 6 7 5 8 10 9 1 1 12 13 14 15 17.
8 9 9 Top View Left View Bottom View 19 18 20 21 22 23 16 1 AF assist beam / Timer indicator 13 Self-timer / Down button 2 Flash 14 Flash mode / Left button 3 Lens 15 Func / ok button 4 Mic 16 USB/ AV.
10 11 Front View Camera views : E Series Back View Right View 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15.
10 11 11 Top View Left View Bottom View 1 Flash 13 Self-timer / Down button 2 Mic 14 Flash mode / Left button 3 AF assist beam / Timer indicator 15 Func / ok button 4 Lens 16 Shutter button 5 LCD scre.
12 13 12 13 1. Place the battery into the charger as shown. 2. Plug one end of the connecting cable into the charger base. 3. Plug the other end of the connecting cable into a wall outlet . Charging the battery (except A Series) Leave the battery to charge until the charger light goes green.
12 13 12 13 Inserting the battery 1. Open the battery compartment . + - - + 2. Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to be inserted properly.
14 15 3. Close the battery compartment . 1. Open the battery compartment . Inserting the battery (E Series).
14 15 15 Battery capacity decreases with usage. 3. Close the battery compartment . 2. Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to be inserted properly.
16 17 16 17 Inserting an optional SD/SDHC card 1. Open the battery compartment . 2. Insert an optional SD/SDHC card into the memory card slot as shown. Optional SD/SDHC cards are not included. The use of 64MB to 8GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshib a is recommended for reliable data storag e.
16 17 16 17 To remov e the SD/SDHC card, open the battery com- partment and gently push the card to release it . Pull the card carefully. Turning on and o Press the Power button to turn the camera on. To turn o the camera, press the Power button again.
18 19 18 19 Using the Mode Dial The GE camera provides a convenient mode dial that allows you to switch between dierent modes with ease. All the available modes are listed as follows. Mode Name Icon Description Auto Switch to take still pictures. (The camera uses the default programmed automatic settings.
18 19 18 19 Setting date/time and language To set t he la nguag e, d ate, and t ime, the f ollo wing settings need to be congured in the Setup menu. • Date / Time • Display language To access the Setup menu, do the following: 1. Press Power to turn the camera on.
20 20 21 2. Press the Left/Right to highlight each eld and use the Up/Down to adjust the value. 3. Press the button to conrm the setting. Setting the Language 1. Use the Up/Down to select Language . Then press the Right to enter the setting. 2. Use the navigation buttons to select the desired language.
20 21 If the LCD monitor is damaged, take particular care with the liquid crystal in the monitor . If any of the following situations arise, take the urgent action indicated. • If liquid crystal comes in contact with your skin, wipe the area with a cloth and then wash thoroughly with soap and running water .
22 23 22 23 Shooting in Auto mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: 1. Set the mode dial to Auto mode ( ). 2.
22 23 22 23 Using the ash There are six ash modes. Press the Left/Flash to cycle through the following ash modes. • Auto ash Camera ash res automatically based on existing light conditions. • Red-eye reduction ash The camera res a brief ash before the pic - ture is taken to reduce red-eye eects.
24 25 24 25 Using Macro mode In Macro mode, you can capture tiny details of the subject at a very close range. Press the Right/Macro to take close-up shots.
24 25 24 25 Advanced function menu (quick menu setup) WB (White Balance) The white balance allows the user to adjust the color temperature under dierent light source to ensure faith - ful color reproduction. (The WB setting is only available when the camera is in the Manual mode).
26 ISO The ISO function allows you to set the camera sensor sensitivity to light. To improve the performance in darker environments, a higher ISO value is required. On the other hand, a lower ISO value is needed when in bright conditions. (The ISO setting is only available when the camera is in the Manual mode).
27 Quality The quality setting adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. To set the image quality, do the following: 1. Press the button to enter the Function menu. 2. Use the Left/Right navigation buttons to highlight the Quality function.
28 Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image. To set the image size, do the following: 1. Press the button to enter the Function menu.
29 Color The color setting allows you to add artistic eects directly when taking shots. You can try dier ent color tones to alter the mood of your pictures. (The Color setting is only available when the camera is in the Manual mode). To set the image color , do the following: 1.
30 • Size settings in shooting mode. (•: available) File size (Pixels) Model name : A950 A1050 A1250 A1035 A1235 WM1050 E1255W 0.3M: 640×480 • • • • • • • 2M: 1600×1200 • 3M: 204.
31 File size (Pixels) Model name : A950 A1050 A1250 A1035 A1235 WM1050 E1255W 9M: 3456×2584 • • • • 9M(3:2): 3648×2432 ••• 9M(16:9): 4000×2248 ••• 10M: 3648×2736 • • • • • • 10M(3:2): 3824×2548 • • 10.
32 33 LCD Screen display USING THE MODES Still shooting mode display Mode: 10 1 13 14 15 16 17 9 1 1 12 2 3 4 5 6 7 8 19 18 20 21 1. Shooting mode icon Auto Manual Panorama Portrait Scene Image Stabilization 2.
32 33 33 Continuous shot 6. Macro mode indicator Macro mode 7. Flash mode indicator Auto ash Red-eye reduction ash Forced ash Flash o Slow Synchro Red-Eye Reduction+Slow Synchro 8. Battery status 9. Face detection “on” indicator 10. Remaining number of photos that can be taken.
34 Video shooting mode display Mode : 1 11 12 7 9 13 8 10 2 3 4 5 6 1. Shooting mode icon 2. Light metering method Spot AE Center-Weight Ai AE 3. EV indicator 4. Self-timer indicator 10-second self-timer 5. Macro mode indicator Macro mode 6. Battery status 7.
35 Playback mode display Mode: 10 9 1 2 3 4 5 6 7 8 12 13 14 15 1 1 18 17 16 1. Playback mode icon 2. DPOF le icon 3. File protection icon 4. Audio le icon 5. Video le icon 6. Memory card/internal memory indicator 7. Picture ID 8. Battery status 9.
36 37 In the "ASCN" mode, dierent conditions are detected intelligently and the most suitable settings will be automatically selected. With "ASCN" you can always take good pictures. Follow these steps to create a "ASCN": 1.
36 37 37 Landscape Mode For landscapes, ASCN will automatically adjust the exposure to match the background. Portrait mode For portraits, ASCN will automatically adjust the exposure and skin tones to give clear pictures.
38 39 In Manual Scene mode, you can select from a total of 12 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. To enter the scene mode, turn the mode dial to Manual Scene mode.
38 39 39 Sunset For shooting sunsets. Vivid reproduction of red and yellow. Fireworks For shooting at night and reworks. Shutterspeed is slower than normal.(Use of tripod is recommended) Glass Suitable for photographing objects behind glass or window.
40 41 Pan-Capture Panorama Returning to the Scene selection menu 1. In Scene mode, press the button to activate the main function menu. 2. Select the “SCENE” menu option and then press the button to return to the to Scene selection menu. The main function menu also allows you congure image quality and image size.
40 41 41 3. Use the Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic sequence will commence automatically. 4. ComposeyourrstviewontheLCDscreenandpress the shutter button.
42 43 Image Stabilization mode The Image Stabilization mode combats the eect of hand shake and allows you to take pictures that would otherwise be blurred. 1. Switch the mode dial to ( ) mode. 2. Press Shutter halfway to focus on the subject . 3. Press Shutter fully to capture the image.
42 43 43 The stabilizer function is used for less blur picture caused by hand shake under a dark environment , the camera would increase the ISO level under the mode to have a higher shutter speed. This function may not help to take a clear picture of a fast moving target, such as a car passing by, etc.
44 45 44 45 The Face Detection mode will detect faces of persons in a photo so that the faces will be as clear as possible. 1. While in photography mode, press the button to activate Face Detection. The indicator appears on the LCD. 2. Hold the camera securely, and point the camera towards the subject to start the face detection process.
44 45 44 45 Smile Detection With the camera's new "smile detection"feature, which automatically detects and captures a person smiling, you'll never miss a smile. 1. While in shoot ing m ode, pres s th e but ton re peated ly u ntil appea rs on the LCD .
46 47 46 47 Blink Detection The Blink Detection feature is on by default , and after taking each photo, a warning message will pop up if a blink had been detected in the photo. 1. In photography modes, press the button to enter the Photo menu. 2. Use the Up/Down navigation buttons to select "Bl ink detection" setting.
46 47 46 47 Viewing photos and videos PLAYBA CK To view the captured photos and video clips on the L CD screen: 1. Turn your camera to Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card.
48 During the video playback, an operation guide appears on the screen. You can use the navigation pad to per- form the functions accordingly. During the video playback, you can use the Up/Down navigation buttons to adjust the volume of playback.
49 Editing video Press the Edit program button to enter the follow- ing screen and use the buttons on the left side to edit the playback. Use the Up/Down navigation buttons to select a button. 1. Select the button and use the Left/Right navigation buttons to specify the new beginning of the playback.
50 51 50 51 To exit the Edit screen, select the button and press the button. Edited video must be at least 1 second long . With sucient battery and at least 1GB available memory, up to 30 minutes of footage can be recorded per movie.
50 51 50 51 Using zoom playback (for still pictures only) The zoom scroll wheel can also be used during play - back. This allows you to magnify photos up to 8X . 1. Turn your camera to Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify.
52 53 52 53 Using the Delete button The camera is equipped with a quick Delete button for you to delete photos or videoclips without entering the Playback menu. To delete a photo or video: 1. Turn your camera to Playback mode. 2. Use the navigation buttons to select the photo/ video clip you want to delete.
52 53 52 53 Still menu USING THE MENUS Mode : In still shooting modes, press the button to enter the Still menu. To congure the settings: 1. In the Still menu, press the Up/Down button to switch between the page numbers of the function menu, and press the Right button to enter the function menu option.
54 AF mode (Auto-Focus mode) Use this setting to control the auto-focus mechanism while taking pictures. Two options are available: • Single-AF : The focus frame appears on the center of the LCD screen to focus on the subject . • Multi-AF : The camera automatically focuses the subject in a wide area to nd the focus point .
55 Cont . Shot (Continuous shot) Use this setting to perform continuous shooting. Once in this mode, you must continuously hold the shutter button to use this function. Four options are available: • O : Capture a single shot only. • 3 shot : Capture up to 3 consecutive pictures.
56 Quick Review This setting refers to the quick photo review immedi - ately after taking a picture. The picture stays on the LCD screen for an adjustable period of time. Four options are available: • O • 1 sec • 2 sec • 3 sec Digital Zoom Use this setting to enable or disable the digital zoom function.
57 Digital Zoom indicator • O: gray color . • On: reddish color . Histogram The histogram is used for checking the exposure while taking pictures.
58 58 59 Date Imprint Include a date/time stamp in the photo image. • O : • Date • Date and time Blink Detection The Blink Detection feature is on by default , and after taking each photo, a warning message will pop up if a blink had been detected in the photo.
58 59 Movie menu Mode : In movie shooting mode, press the button to enter the Movie menu. To congure the settings: 1. In the Short Movie Shot menu, press the Up/Down button to switch between the page numbers of the function menu, and press the Right button to enter the function menu option.
60 60 61 Expo Metering (Exposure Metering) Set metering mode for various lighting conditions. Three options are available: • Spot metering • Center-weighted average metering • Articial intell.
60 61 Playback menu Mode : In playback mode, press the button to enter the Playback menu. Please refer to the following sections for detailed instructions on the various menu options. Protect To prev ent pictures or videos being erased accidentally, you can use this setting to lock one or all les.
62 3. Use the Up/Down navigation buttons to select One to protect this picture/video, or select All to protect all pictures/videos in the internal memory or memory card.
63 • Delete All : 1. On the Delete menu, select Delete All and then press the Right button. 2. Using the Left/Right buttons, select Yes (to delete all les) or No (to cancel and return to the previous menu). The “ ” indicator means a le is protected.
64 Info. Box (Information Bo x) Use this setting to enable or disable the text display for taking pictures. The following information will be dis - played on the screen: histogram display, aperture value, shutter speed, exposur e value, image size, image quality, and ISO value.
65 4. Press the Shutter button to save what you see on the LCD screen as a new pictur e, or the butt on to cancel and return to the Playback menu. Resize This setting allows you to resize a picture to a specied resolution, and saves it as a new picture.
66 direction for rotation or Back to cancel and return to the Playback menu. 4. Press the button to conrm the setting. The rotated image will be saved as a new le, and the original image will remain intact in memory. Slide show This setting allows you to view all the stored pictures as a slideshow .
67 Red-eye r emoval Use this setting to remove red-eye eect in your photos. 1. Select the Red-eye removal setting from the Playback menu as described previously. 2. Use the Left/Right navigation buttons to select the image for which red-eye will be removed.
68 69 Setup menu Mode : The Setup menu is available in all modes. Press the button in any modes, then use the navigation buttons to select the Setup menu. To congure the settings: 1. In the Setting menu, press the Up/Down button to switch between the page numbers of the function menu, and press the Right button to enter the Setting menu option.
68 69 69 3. The current media is formatted. Beep Use this setting to adjust the volume of beep when buttons are pressed and change the tones for shutter , buttons, self-timer , and power-on/power-o. To change this setting: 1. Select the Beep setting from the Setup menu as described previously.
70 3. For manual adjustment , use the Left/Right buttons to adjust the brightness. Power Saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn o the LCD screen and camera automatically after a period of inactivity.
71 Date/Time See “ Setting the Date and Time “ section on page 19. World time The world time setting is a useful function on your over- seas trips. This feature enables you to display the local time on the LCD screen while you are ov erseas. 1. Select the World time setting from the Setup menu as described previously.
72 Select this setting: Serial number is derived and assigned to a new le as follows: Continue whether the number should continue on from the last photo you have taken Reset reset the counter to 1 and save les in a new folder in the memory card.
73 Copy to Card (Copy internal memory t o memory card) Use this setting to copy the les stored in the internal memory to the memory card. 1. Select the Copy to memory card setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to select Yes or No .
74 74 75 FW Ver . (Firmware version) Use this setting to view the current camera rmware version. 1. Select the FW Ver . setting from the Setup menu as described previously. 2. If SD card contains a new version of rmware, please upgrade accordingly as necessary.
74 75 CONNECTIONS Connecting to a T V You can connect your camera to your television, computer, or printer to view picture you have taken. By using the AV cable, you c an view the captured images on a TV. Follow the steps below to connect the supplied AV cable to a TV.
76 77 Connecting to a PC Use the USB cable and ArcSoft software (CD-ROM) supplied with your camera to copy (transfer) pictures to a computer . Setting the USB mode Since the camera’s USB port can be.
76 77 77 If the USB option is set to [P C] : Turn the camera o and disconnect the USB cable. If the USB option is set to [P C (PTP) ] : Remove the camera from the system as described below before turning the camera o and disconnecting the USB cable.
78 78 79 Window 2000 Professional Click the [Unplug or Eject Hardware] icon in the taskbar and select [Stop USB Mass Storage Device] from the menu displayed.
78 79 Connecting to a PictBridge compatible printer PictBridge allows printing images from a memory card in a digital camera directly to a printer , regardless of brand. To nd out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the manual for specications.
80 80 81 Connecting the camera and printer. 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera.
80 81 After setting the USB mode to Printer, the PictBridge menu appears. Use the Up/Down navigation buttons to select a menu item, and press the Right navigation button to enter . Refer to the following sections for more detailed infor- mation on each setting.
82 3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. 4. Press the button and the following screen appears. 5. Select Yes to conrm printing, or No to cancel. Then press the button. Print without date Use this setting to print the photos without dates on them.
83 5. Select Yes to conrm printing, or No to cancel. Then press the button. Print index You can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears.
84 84 85 Print DP OF (Digital Print Order F ormat) To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “ DPOF ” section on page 63. 1. Select Print DP OF from the PictBridge menu. The following screen appears.
84 85 Specications : A950/A1050/WM1050/A1250 APPENDICES Model name A950 A1050 WM1050 A1250 Eective Image Sensor Pixels 9.1 Megapixels 10.1 Megapixels 10.1 Megapixels 12.2 Megapixels Image Sensor 9.4 Megapixels 1/2.33" CCD 10.4 Megapixels 1/2.
86 Model name A950 A1050 WM1050 A1250 Anti-Handshake Electronic Image Stabilization Digital Zoom 5.7X digital zoom (Combined Zoom: 28.5X) Number of Recording Pixels : Still Image 9MP, 8MP(3:2), 8MP , 7MP(16:9), 5MP, 3MP, 0.3MP 10MP, 9MP(3:2), 9MP, 8MP , 7MP(16:9), 5MP, 3MP, 0.
87 Model name A950 A1050 WM1050 A1250 Shooting Modes Auto, Manual, ASCN, Image Stabilization, Movie, Scene (Sport, Children, Indoor, Leaf, Snow, Sunset, Fireworks, Glass, Museum, Landscape, Night Land.
88 Model name A950 A1050 WM1050 A1250 Exposure Compensation ±2 EV in 1/3 steps Shutter Speed 4 ~ 1/2000 second (Manual 30 seconds) Continuous Shooting Approx. 1.65 fps (Large/Fine mode) Approx. 1.65 fps (Large/Fine mode) Approx. 1.65 fps (Large/Fine mode) Approx.
89 Model name A950 A1050 WM1050 A1250 Jacks USB2.0/AV-OUT (Integrated Proprietary Connector) Recording Media Internal Memory: 24MB SD Card/SDHC Card (Up to 8GB support) Other Features PictBridge, Exif.
90 91 Specications : A1035/A1235 APPENDICES Model name A1035 A1235 Eective Image Sensor Pixels 10.1 Megapixels 12.2 Megapixels Image Sensor 10.4 Megapixels 1/2.33" CCD 12.4 Megapixels 1/2.3" CCD Lens Focal Length F = 6.3mm (Wide) ~ 18.
90 91 91 Model name A1035 A1235 Number of Recording Pixels : Still Image 10MP, 9MP(3:2), 9MP, 8MP , 7MP(16:9), 5MP, 3MP, 0.3MP 12MP, 10MP(3:2), 10MP , 9MP(16:9), 8MP , 5MP, 3MP, 0.3MP Number of Re-cording Pixels :Movie 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Image Compression Best, Fine, Normal DCF, DPOF (Ver1.
92 Model name A1035 A1235 Red-eye Removal Yes Pan-Capture Panorama Yes LCD Display 2.5 inch LTPS TFT color LCD (230,400 pixels) ISO Sensitivity Auto, ISO 64/100/200/400/800/1600 AF Method Single AF, M.
93 Model name A1035 A1235 Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/Red-Eye Reduction+Slow Synchro Gno. 5.3 (ISO 100) (Shooting Range): (Wide) : Approx. 0.3m~4.9m, (Tele) : Approx. 0.3m~3.1m (ISO 800) Jacks USB2.
94 95 Eective Image Sensor Pixels 12.2 Megapixels Image Sensor 12.4 Megapixels [1/2.3” (CCD)] Lens Focal Length F = 5.2mm (Wide) ~ 26mm (Tele) 35mm lm equivalent 28mm (Wide) ~ 140mm (Tele) F number F3.
94 95 95 Number of Recording Pixels Still Image 12MP, 10.5MP(3:2), 10MP, 9MP(16:9), 8MP , 5MP, 3MP, 2MP , 0.3MP Movie 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format Still Image Exif 2.
96 Pan-Capture Panorama Yes LCD Display 3.0 inch (230,400 pixels) LTPS (low-temperature polycrystalline silicon) TFT color LCD ISO Sensitivity Auto, ISO 64/100/200/400/800/1600 AF Method Single AF, Mu.
97 Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/Red-Eye Reduction+Slow Synchro Gno. 5.0 EV (ISO 100) Shooting Range Wide: Approx.
98 99 Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. Card full • The memory card is full and cannot store any new images. Write protect • The memory card is write-protected.
98 99 99 Messages Explanation Card is not formatted, format? • Conrm whether the memory card should be formatted. This image cannot be deleted • The picture or video you are trying to delete is protected. Cannot record movie • The write protection switch in the memory card is set to the “LOCK” posi- tion.
100 101 Troubleshooting Problem Possible causes Solution Camera does not turn on. • The battery has run out. • The battery is not inserted correctly. • Charge the battery or replace with a fully charged battery. • Re-insert the battery observing the cor- rect polarity.
100 101 101 Problem Possible causes Solution No picture is taken when press - ing the shutter button. • The memory card is full. • No available space to store the les. • The mode dial is in Playback mode. • Replace the memory card with a new one or clean o current memory card.
© 2009 General Imaging Company http://www .ge.com/digitalcameras.
デバイスGE A1035の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GE A1035をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGE A1035の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GE A1035の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GE A1035で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GE A1035を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGE A1035の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GE A1035に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGE A1035デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。