GEメーカーE1035の使用説明書/サービス説明書
ページ先へ移動 of 106
PB i USER MANUAL G Series G2 A Series A735 E Series E840s/E1035 GE-Digital Camera A835 E1235.
ii iii.
ii iii T h i s s y m b o l [ c r o s s e d - o u t w h e e l e d b i n W E E E Annex IV] indicates separate collection of waste electrical and electr onic equipment in the EU countries.
iv 1 iv 1 SAFE T Y PRECAUTIONS Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.
iv 1 iv 1 BEFORE YOU ST ART Preface Thank you for purchasing GE digital cameras. Please read this manual carefully and k eep it in a safe place for future refer ence.
2 3 2 3 • Do not expose the camera to moisture, or ex- treme temperatures. Extreme envir onments may shorten the life of your camera or damage the batteries. • Do not use or store the camera in dusty, dirty, or sandy areas, as its components may be dam- aged.
2 3 2 3 W ARNING SAFET Y PRECAUTIONS BEFORE YOU ST ART ................................ 1 Preface ............................................................ 1 Copyright .................................................. 1 Trademarks ................
4 5 4 5 Quality ..................................................... 33 Size ........................................................... 34 Color ........................................................ 35 USING THE MODES ............................
4 5 4 5 Expo Metering (Exposure Metering).. 56 Cont . Shot (Continuous shot) .............. 57 Grid .......................................................... 57 Quick Review ......................................... 58 Digital Zoom ..................
6 7 6 7 Connecting to a PC ..................................... 77 Setting the USB mode .......................... 78 Transferring les to your PC .............. 78 Connecting to a PictBridge compatible printer .....................................
6 7 6 7 GET TING RE ADY Your package should contain the camera model you pur chased along with the following items. If anything is missing or appears to be damaged, please contact your vendor . (The accessories will vary based on model purchased and ar e noted below .
8 9 8 9 Front View Camera views : G2 Back View Right View 1 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 16.
8 9 8 9 T op View Left View 1 Mic 13 Self-timer/ Down button 2 Flash 14 Flash mode/ Left button 3 Lens 15 Func/ok button 4 AF assist beam/Timer indicator 16 Speaker 5 LCD screen 17 Zoom scroll wheel 6.
10 11 10 11 Front View Camera views : A735/A835 Back View Right View 1 2 3 4 5 8 7 6 9 10 1 1 12 13 14 15 16.
10 11 10 11 T op View Left View 1 Flash 13 Self-timer/ Down button 2 Lens 14 Func/ok button 3 Mic 15 Flash mode/ Left button 4 AF assist beam/Timer indicator 16 USB/ AV port 5 Status LED 17 Power butt.
12 13 12 13 Front View Camera views : E840s Back View Right View 1 2 3 4 5 7 6 8 9 10 1 1 12 13 14 15 16.
12 13 12 13 T op View Left View Bottom View 1 Mic 13 Self-timer/ Down button 2 Flash 14 Flash mode/ Left button 3 AF assist beam/Timer indicator 15 Func/ok button 4 Lens 16 Speaker 5 LCD screen 17 Pow.
14 15 14 15 Front View Camera views : E1035/E1235 Back View Right View me gap i x el 10.1 E 1 0 3 5 1 2 3 4 5 7 6 8 9 10 1 1 12 13 14 15.
14 15 14 15 T op View Left View Bottom View 1 Flash 13 Self-timer/ Down button 2 AF assist beam/Timer indicator 14 Func/ok button 3 Lens 15 Flash mode/ Left button 4 Mic 16 Power button 5 LCD screen 1.
16 17 16 17 1. Place the battery into the char ger as shown. 2. Plug one end of the connecting cable into the charger base. 3. Plug the other end of the connecting cable into a wall outlet . Charging the battery (except A735/835) Leave the battery to charge until the charger light goes green.
16 17 16 17 Inserting the battery 1. Open the battery compartment . 2. In se r t t he b at te ry w hi le ob se r vi n g the correct polarity. Use the side o f battery to press down the stopper as s ho w n , a l l ow i n g t h e b a t te r y t o be inserted properly.
18 19 18 19 3. Close the battery compartment . Battery capacity decreases with usage. Inserting the battery (A735/A835) 1. Open the battery compartment .
18 19 18 19 2. In se r t t he b at te ry w hi le ob se r vi n g the correct polarity. Use the side o f battery to press down the stopper as s ho w n , a l l ow i n g t h e b a t te r y t o be inserted properly.
20 21 20 21 Inserting an optional SD/SDHC card 1. Open the battery compartment . 2. Insert an optional SD/SDHC card int o the memory card slot as shown. Optional SD/SDHC cards are not included. The use of 64MB to 4GB memory cards from recognized manufactur ers such as SanD isk, Panasonic and Toshiba is recommended for reliable data storage.
20 21 20 21 To r emove the SD/SDHC card, open the battery compartment and gently push the card to release it . Pull the card carefully. Turning on and o Press the Power button to turn the camera on. To turn o the camera, pr ess the Power button again.
22 23 22 23 Using the Mode Dial The GE camera provides a convenient mode dial that allows you to switch between dierent modes with ease. All the available modes are listed as follows. Mode Name Icon Description Auto Switch to take still pictures. (The camera uses the default pro - grammed automatic settings.
22 23 22 23 Setting date/time and language To set the l anguage, date , and time, the followin g settings need to be congured in the Setup menu. • Date / Time • Display language To access the Setup menu, do the following: 1 .Press Power to turn the camera on.
24 25 24 25 2. Press the Left/Right to highlight each eld and use the Up/Down to adjust the value. 3. Press the button to conrm the setting. Setting the Language 1. Use the Up/Down to select L an gu a ge . Then press the Right to enter the setting.
24 25 24 25 If the LCD monitor is damaged, take particular care with the liquid crystal in the monitor . If any of the following situations arise, take the urgent action indicated. • If liquid crystal comes in contact with your skin, wipe the area with a cloth and then wash thoroughly with soap and running water .
26 27 26 27 Shooting in Auto mode Auto mode is the easiest mode to take pho - tos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: 1. Set the mode dial to Auto mode ( ).
26 27 26 27 Zoom indicator (See “Digital Zoom“ on page 58) Using the ash There are six ash modes. Pr ess the Left/ Flash to cycle through the following ash modes. • Auto ash Camera ash res automatically based on existing light conditions.
28 29 28 29 Using Macro mode In Macro mode, you can capture tiny details of the subject at a very close range. Press the Right/Macro to take close-up shots.
28 29 28 29 Advanced function menu (quick menu setup) WB (White Balance) The white balance allows the user to adjust the color temperature under dierent light source to ensure faithful color r eproduction. (The WB setting is only available when the camera is in the Manual mode).
30 31 30 31 ISO The ISO function allows you to set the camera sensor sensitivity to light . To impr ove the performance in darker environments, a higher ISO value is requir ed. On the other hand, a lower ISO value is needed when in bright conditions. (The ISO setting is only available when the camera is in the Manual mode).
30 31 30 31 Quality The quality setting adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. To set the image quality, do the following: 1. Press the button to enter the Function menu.
32 33 32 33 Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image. To set the image size, do the following: 1. Press the button to enter the Function menu.
32 33 32 33 Color The color setting allows you to add artistic eects directly when taking shots. Y ou can try dierent color tones to alter the mood of your pictures. (The Color setting is only available when the camera is in the Manual mode). To set the image color , do the following: 1.
34 35 34 35 • Size settings in shooting mode. (•: available) Icon File size (Pixels) Model name : G2 A735 A835 E840s E1035 E1235 0.3M: 640×480 • • • • • • 1M: 1024×768 • • • .
34 35 34 35 Icon File size (Pixels) Model name : G2 A735 A835 E840s E1035 E1235 7M: 3072×2304 • 7M(3:2): 3264×2176 • • • 7M(16:9): 3648×2052 • 8M: 3264×2448 • • • 9M(3:2): 3648×24.
36 37 36 37 LCD Screen display USING THE MODES Still shooting mode display Mode: 10 1 13 14 15 16 17 9 11 12 2 3 4 5 6 7 8 19 18 20 1 Shooting mode icon Auto Manual Panorama Portrait Scene Image Stabi.
36 37 36 37 6 Macro mode indicator Macro mode 7 Flash mode indicator Auto ash Red-eye reduction ash Forced ash Flash o Slow Synchro Red-Eye Reduction+Slow Synchro 8 Battery status 9 Face detection “on” indicator 10 Remaining number of photos that can be taken.
38 39 38 39 Video shooting mode display Mode: 1 11 12 7 9 13 8 10 2 3 4 5 6 1 Shooting mode icon 2 Light metering method Spot AE Center-Weight Ai AE 3 EV indicator 4 Self-timer indicator 10-second self-timer 5 Macro mode indicator Macro mode 6 Battery status 7 Movie recording “on” indicator 8 Remaining time for videos that can be taken.
38 39 38 39 Playback mode display Mode: 10 9 1 2 3 4 5 6 7 8 12 13 14 15 11 18 17 16 1 Playback mode icon 2 DPOF le icon 3 File protection icon 4 Audio le icon 5 Video le icon 6 Memory card/i.
40 41 40 41 In Scene mode, you can select from a total of 12 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. To enter the scene mode, turn the mode dial to Scene mode.
40 41 40 41 Snow Suitable for snowy landscape. Camera auto- matically adjusts and corrects exposure v alue (EV). Sunset For shooting sunsets. Vivid reproduction of red and yellow . Fireworks For shooting at night and reworks. Shutter - speed is slower than normal.
42 43 42 43 Panorama mode Returning to the Scene selection menu 1. In Scene mode, press the button to activate the main function menu. 2. Select the “SCENE” menu option and then press the button to return to the to Scene selection menu. The main function menu also allows you congure image quality and image size.
42 43 42 43 2. Use the Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic sequence will commence automatically. 3. Compose your rst view on the LCD screen and press the shutter button. 4. The frame record icon will display under the focus frame to indicate the number of photos you have taken.
44 45 44 45 Image Stabilization mode Setting the Image Stabilization function under ( ) mode. ( Stabilization during Movie mode is only available when the Frame Rate is set to 15 fps) 1.Swit ch the mode dial to ( ) mode. 2.Press the button to enter the Function menu.
44 45 44 45 The stabilizer function is used for less blur picture caused by hand shake under a dark environment , the camera would increase the ISO level under the mode to have a higher shutter speed. This function may not help to take a clear picture of a fast moving target , such as a car passing by, etc.
46 47 46 47 The Face Detection mode will detect faces of persons in a photo so that the faces will be as clear as possible. 1. While in photography mode, press the button to activate Face Detection. The indicator appears on the LCD. 2. Hold the camera securely, and point the camera towards the subject to start the face detection process.
46 47 46 47 Viewing photos and videos PLAYBA CK To view the captur ed photos and video clips on the LCD screen: 1. Turn your camera to Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card.
48 49 48 49 During the video playback, an operation guide appears on the screen. Y ou can use the navigation pad to perform the functions ac- cordingly. During the video playback , you can use the Up/Down navigation buttons to adjust the volume of playback.
48 49 48 49 Editing video Press the Edit program button to enter the following screen and use the buttons on the left side to edit the playback. Use the Up/ Down navigation buttons to select a button. 1. Select the button and use the Left/ Right navigation buttons to specify the new beginning of the playback.
50 51 50 51 To exit the Edit scr een, select the but- ton and press the button. Edited video must be at least 1 second long . With sucient battery and at least 1GB available memory, up to 30 minutes of footage can be recorded per movie.
50 51 50 51 Using zoom playback (for still pictures only) The zoom scroll wheel can also be used during playback. This allows you to magnify photos up to 8X . 1. Turn your camera to Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify.
52 53 52 53 Using the Delete button The camera is equipped with a quick Delete button for you to delete photos or video- clips without entering the Playback menu. To delete a photo or video: 1. Turn your camera to Playback mode. 2. Use the navigation buttons to select the photo/video clip you want to delete.
52 53 52 53 Still menu USING THE MENUS Mode: In still shooting modes, press the button to enter the Still menu. To congur e the settings: 1. Use the Up/Down navigation buttons to scroll through the menu items. 2. Press the Right navigation button to enter the submenu.
54 55 54 55 AF mode (Auto-Focus mode) Use this setting to control the auto-focus mechanism while taking pictures. Two options are available: • Single-AF : The focus frame appears on the center of the LCD screen to focus on the subject . • Multi-AF : The camera automatically focuses the subject in a wide area to nd the focus point .
54 55 54 55 Expo Metering (Exposure Metering) Use this setting to select an area for the exposure to be obtained. Three options are av ailable: • Spot AE (Spot Auto Exposure) • Center-Weight • AiAE (Articial Intelligence AE) Cont. Shot (Continuous shot) Use this setting to perform continuous shooting.
56 57 56 57 • Time-Lapse : Automatically captur e pictures in at predened intervals. The ash is designed not to work in this mode in order to enable quick succession of shots.
56 57 56 57 Digital Zoom Use this setting to enable or disable the digital zoom function. When disabled, only the optical zoom is enabled. Digital Zoom indicator • Off: gray color . • On: reddish color . Histogram The histogram is used for checking the expo - sure while taking pictures.
58 59 58 59 Slow Shutter In Slow shutter mode, the shutter will remain open as long as the shutter button is pressed. This gives you complete control over the duration of exposure. (The slow shutter mode is available only in manual mode. • Manual : To set a long exposur e time between 2~30 sec.
58 59 58 59 Movie menu Mode: In movie shooting mode, press the button to enter the Movie menu. To congur e the settings: 1. Use the Up/Down buttons to scroll through menu items. 2. Press the Right navigation button to enter the submenu. 3. Use the Up/Down navigation buttons to select an option.
60 61 60 61 Expo Metering (Exposure Metering) Set metering mode for various lighting condi- tions. Three options are av ailable: •Spot metering •Center-weighted average meter- ing •Articial intelligence automatic exposure (Ai AE) Stabilization Please refer to page 44 for instructions on image stabilization.
60 61 60 61 Playback menu Mode: In playback mode, press the button t o enter the Playback menu. Please refer to the following sections for detailed instructions on the various menu options. Protect To pr event pictures or videos being erased accidentally, you can use this setting to lock one or all les.
62 63 62 63 2. Select the Protect setting from the Playback menu as described previously. 3. Use the Up/Down navigation buttons to select One to protect this picture/video, or select All to protect all pictures/videos in the internal memory or memory card.
62 63 62 63 the previous menu) using the Up/Down buttons, then press the button to conrm. •Delete All : 1. On the Delete menu, select Delete All and then press the Right button. 2. Using the Left/Right buttons, select Y es (to delete all les) or No (to cancel and return to the previous menu).
64 65 64 65 DPOF (Digital Print Order Format) DPOF allows you to record your selection of pictures that you would like to print , and will save your selection in the memory card, so that you can simply hand your memory card to a photo kiosk without having to tell them in person which photos you would like to print .
64 65 64 65 T rim The trim setting allows you select an area of the photo you want to keep and then save it as a new photo. To trim a pictur e: 1. Select the T rim setting from the Playback menu as described previously. 2. Using the Left/Right buttons, locate the photo that you want to crop and have it displayed on the LCD .
66 67 66 67 2. Use the Left/Right navigation butt ons to select a picture to resize. 3. Use the Up/Down navigation buttons to select a resolution ( 1024X768 or 640X480 ) to resize the image or back to cancel and return to the Playback menu. 4. Press the button to conrm the setting.
66 67 66 67 cancel and return to the Playback menu. 4. Press the button to conrm the setting. The rotated image will be saved as a new le, and the original image will remain intact in memory. Slide show This setting allows you to view all the stored pictures as a slideshow .
68 69 68 69 Setup menu Mode: The Setup menu is available in all modes. Press the button in any modes, then use the navigation buttons to select the Setup menu. To congur e the settings: 1. Use the Up/Down navigation buttons to scroll through the menu items.
68 69 68 69 3. The current media is formatted. Beep Use this setting to adjust the volume of beep when buttons are pressed and change the tones for shutter , buttons, self-timer , and power-on/power -o. To change this setting: 1. Select the Beep setting from the Setup menu as described previously.
70 71 70 71 LCD Brightness Use this setting to adjust the brightness of your LCD screen. 1. Select the LCD Brightness setting from the Setup menu as described previously. 2. Use the Up/Down buttons to select to Auto or Manual brightness adjustment , and then press to conrm your election.
70 71 70 71 to specify the idle period before automatic power-o. The level bars correspond to the following idle periods. • LCD o: 30 seconds, 1 minute, 2 minutes, and Always on. • Camera o: 3 minutes, 5 minutes, 10 minutes, and Always on.
72 73 72 73 File Numbering After capturing photos or videos, the camera will automatically save the le with a numeric sux. Language See “ Setting the Language “ section on page 26. Video system Use this setting to determine your video system in the current area.
72 73 72 73 NTSC: USA , Canada, Taiwan, Japan, etc. P AL : Europe, Asia (excluding Taiw an), Oceania, etc. Note: The T V output will not display properly if an incorrect video system is selected. Copy to Card (Copy internal memory to memory card) Use this setting to copy the les stored in the internal memory to the memory card.
74 75 74 75 Reset Settings Use this setting to restore the camera to its default settings. 1. Select the Reset setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to select Y es or No . Then press the button to conrm.
74 75 74 75 CONNECTIONS Connecting to a T V You can connect your camera to your television, computer , or printer to view picture you have taken. By using the AV cable, you can view the captured images on a TV . Follow the steps below to connect the supplied AV cable to a TV.
76 77 76 77 Connecting to a PC Use the USB cable and ArcSoft software (CD- ROM) supplied with your camera to copy (transfer) pictures to a computer . Setting the USB mode Since the camera’s USB port.
76 77 76 77 By using the USB cable, you can transfer the captured photos and videos to a PC. Follow the steps below to connect the camera to a PC. 1. Start a computer to which ArcSoft software has been installed. 2. Make sure both the camera and PC are turned on.
78 79 78 79 Window 2000 Professional Click the [Unplug or Eject Hardwar e] icon ( ) in the taskbar and select [Stop USB Mass Storage Device] from the menu displayed.
78 79 78 79 Connecting to a P ictBridge compatible printer PictBridge allows printing images from a memory card in a digital camera directly to a printer , regardless of brand. To nd out if a printer is PictBridge compat - ible, simply look for the PictBridge logo on the packaging or check the manual for specica - tions.
80 81 80 81 Connecting the camera and printer . 1. Make sure both the camera and printer are turned on. 2. Connec t on e e nd of the suppl ied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer .
80 81 80 81 After setting the USB mode to Printer , the PictBridge menu appears. Use the Up/Down navigation buttons to select a menu item, and press the Right navigation button to enter . Refer to the following sections for more de- tailed information on each setting.
82 83 82 83 2. Use the Left/Right navigation buttons to scroll through the photos. 3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. 4. Press the button and the following screen appears. 5. Select Y es to conrm printing, or No to cancel.
82 83 82 83 displayed image. 4. Press the button and the following screen appears. 5. Select Y es to conrm printing, or No to cancel. Then press the button. Print index You can use this setting to print all indexes to show all the photos currently in your camera.
84 85 84 85 Print DPOF (Digital Print Order Format) To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “ DPOF ” section on page 64. 1. Select Print DPOF from the PictBridge menu. The following screen appears.
84 85 84 85 Specications : G2 Appendices "Design and specications are subject to change without notice." Eective Image Sensor Pixels 8.0 Megapixels Image Sensor 8.31 Megapixels [1/2.35” Charge Coupled Device (CCD)] Lens Focal Length F = 6.
86 87 86 87 Image Compression Best , Fine, Normal DCF , DPOF (Ver1.1) Support Yes File Format Still Image Exif 2.2 (JPEG) Movie Image Compression: MPEG4, Audio: G.
86 87 86 87 AF Method Single AF , Multi-AF (T TL 9-point), Face-Detection, AF Assist Light (On/O) Light Metering Method Artificial Intelligence AE (Ai AE), Center-weighted Average, Spot (Fixed to c.
88 89 88 89 Recording Media Internal Memory: 26MB SD Card/SDHC Card (Up to 4GB support) Other Features PictBridge, Exif Print Support , Multi-language Support (11 languages) Jacks USB2.0/AV-OUT (Integrated Proprietary Connector) Power Rechargeable Lithium-ion Battery GB-20, 3.
88 89 88 89 Eective Image Sensor Pixels 7.07 /8.0 Megapixels Image Sensor 7.40 /8.5 Megapixels [1/2.5” (CCD)] Lens Focal Length F = 6.1mm (Wide) ~ 18.
90 91 90 91 Num ber of Re co rdi n g Pixels Still Image A7 3 5 : 7 M P : ( 3 0 7 2 x2304) , ( 3 : 2 ) 6 M P : ( 3 07 2x2048) , (16:9)5MP:(3 0 7 2 x1728), 3MP , 2MP , 1MP , 0.3MP A835: 8MP:(3264x2448),(3:2)7 M P : ( 3 2 64 x2176), (16:9)6MP:(3 2 6 4 x1836), 5MP: (2560x1920), 3MP , 2MP , 1MP , 0.
90 91 90 91 Panorama Stitching Y es LCD Display 2.5 inch L TPS (low-temperature polycrystalline silicon) TF T color LCD (153,600 pixels) ISO Sensitivity Aut o, ISO 80/100/200/400/800/1600 AF Method Si.
92 93 92 93 Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/ Slow Synchro/Red-Eye Reduction+Slow Synchr o Gno. 6.5 (ISO 100) Shooting Range Wide: Approx.
92 93 92 93 Specications : E840s/E1035/E1235 Appendices Model name E840s E1035 E1235 Eective Image Sensor Pixels 8.0 Megapixels 10.1 Megapixels 12.1 Megapixels Image Sensor 8.53 Megapixels 1/2.5" CCD 10.54 Megapixels 1/1.7" CCD 12.40 Megapixels 1/1.
94 95 94 95 Model name E840s E1035 E1235 Anti-Handshake Electronic Image Stabilization Digital Zoom 4.5X digital zoom (Combined Zoom: 22.5X) 4.5X digital zoom (Combined Zoom: 13.5X) 4.5X digital zoom (Combined Zoom: 13.5X) Number of Re- cording Pixels : Still Image (See page36) 8MP , 7MP(3:2), 6MP(16:9), 5MP , 3MP , 2MP , 1MP , 0.
94 95 94 95 Model name E840s E1035 E1235 File Format : Movie Image Compression: MPEG4, Audio: G.711 [Monaural] File Format : Audio WA VE [Monaural] (Max 60 seconds) Shooting Modes Auto, Manual, Image .
96 97 96 97 Model name E840s E1035 E1235 ISO Sensitivity Auto, ISO 80/100/200 /400/800/1600 Auto, ISO 64/100/200/ 400/800/1600/3200 Auto, ISO 64/100/200/ 400/800/1600/3200 (3M) AF Method Single AF , M.
96 97 96 97 Model name E840s E1035 E1235 Internal Flash (Shooting Range) Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchr o/Red-Eye Reduction+Slow Synchro Gno. 5.9 (ISO 100) Gno. 5.7±0.5EV (ISO 100) Gno. 5.7±0.5EV (ISO 100 (Shooting Range) (Wide): Approx.
98 99 98 99 Model name E840s E1035 E1235 Shooting Capability (Battery Performance) Approx. 200 shots (based on CIPA standards) Approx. 210 shots (based on CIPA standards) Approx. 210 shots (based on CIPA standards) Operation Environment Temperatur e: 0~40 o C, Humidity: 0~90% Dimensions (W x H x D) 95.
98 99 98 99 Error messages Messages Explanation No card • The memory card is not inserted. Card error • The memory card is not formatted. (See P.68) Card full • The memory card is full and cannot store any new images. Write protect • The memory card is write-pr otected.
100 101 100 101 Messages Explanation Card is not formatted, format? • Conrm whether the memory card should be formatted. This image cannot be deleted • The picture or video you ar e trying to delete is protected. Cannot record movie • The write protection switch in the memory card is set to the “LOCK” position.
100 101 100 101 T roubleshooting Problem Possible causes Solution Camera does not turn on. • The battery has run out . • The battery is not in- serted correctly. • Charge the battery or replace with a fully charged battery. • Re-insert the battery observing the correct polarity.
102 PB Problem Possible causes Solution No picture is taken when pressing the shutter but- ton. • The memory card is full. • No available space to store the les. • The mode dial is in Play- back mode. • Replace the memory card with a new one or clean o current memory card.
デバイスGE E1035の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GE E1035をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGE E1035の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GE E1035の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GE E1035で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GE E1035を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGE E1035の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GE E1035に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGE E1035デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。