Gibson Guitarsメーカー1550-07 GUSの使用説明書/サービス説明書
ページ先へ移動 of 64
OWNER’S MANUAL.
1550-07 GUS.
© 2007 Gibson Guitar Corp..
T o the new Gibson owner: Congratulations on the purchase of your new Gibson electric guitar—the world’ s most famous electric guitar from the leader of fretted instruments.
The Components of the Solidbody Electric Guitar 4 Gibson Innovations 6 The History of Gibson Electric Guitars 8 DESIGN AND CONSTRUCTION Body 13 Neck and Headstock 13 Pickups 14 Controls 15 Bridge 17 T.
6 Strap Button Stopbar T ailpiece T une-o-matic Bridge The Components of the Solidbody Electric Guitar Featuring a Les Paul Standard in Heritage Cherry Sunburst 12th Fret Marker/Inlay Neck Fret Nut He.
7 Strap Button Stopbar T ailpiece T une-o-matic Bridge The Components of the Solidbody Electric Guitar Featuring a V-Factor Faded in Worn Cherry 12th Fret Marker/Inlay Neck Fret Nut Headstock Fingerbo.
6 Here are just a few of the Gibson innovations that have reshaped the guitar world: 1894 – First archtop guitar 1922 – First ƒ-hole archtop, the L-5 1936 – First professional quality electric .
7 1958 – First semi-hollowbody guitar , the ES-335 1961 – SG body style introduced in the Les Paul line 1963 – Firebird guitars and Thunderbird basses introduced 1969 – Les Paul Personal and Professional with low-impedance pickups introduced 1979 – L.
8 A BRIEF HISTORY OF GIBSON ELECTRIC GUIT ARS Gibson’ s legendary acoustic engineer , Lloyd Loar , was experimenting with electric instruments in 1924, at the dawn of electronic amplification.
9 The first postwar Gibson electrics followed the prewar concept of an electric guitar as a conventional acoustic archtop with a pickup installed on the top. Gibson added a second pickup to the ES-300 in 1948 and then became the first company to offer a three-pickup model with the introduction of the ES-5 in 1949.
10 In 1954 the growing popularity of the Les Paul Model prompted Gibson to expand the line. On the high end, the Les Paul Custom sported an Ebony finish and low frets for fast action, and it immediately gained two nicknames: the Black Beauty and the Fretless W onder .
11 The body of the Les Paul Jr . received a pair of rounded horns to become Gibson’ s first double- cutaway solidbody . And the finish color on the Les Paul Model was changed to Cherry Sunburst, which let the grain of the maple top show through.
12 In response to the rising demand for 1950s-style Les Pauls, the carved-top models were rein- troduced in 1968. A new model, the Les Paul Deluxe, featuring mini-humbucking pickups appeared in 1969. The Special was revived in the 1970s and the Jr . reappeared in the 1980s.
13 DESIGN AND CONSTRUCTION Body . The solidbody guitar was invented to increase sustain, produce a brilliant tone, and eliminate feedback caused by a vibrating top.
14 Neck Specifications. Gibson designs its guitar necks to complement and enhance the unique characteristics of each model. Neck profiles can be “rounded ’50s” or “slim ’60s” (or a slight V -shape available only on the BluesHawk).
15 without the “dog ears” are nicknamed “soapbar” because the original cream-colored plastic covers on the 1952 Les Paul Model resembled bars of soap. When the P-90 was introduced in 1946, it was the most powerful pickup of its kind. And it still is.
16 V olume controls: The two knobs closest to the fingerboard control the volume of the pickups. The volume knob nearest the bridge controls the “front” or neck pickup; the knob nearest the edge of the guitar controls the “back” or bridge pickup.
17 The T une-o-matic Bridge. The T une-o-matic bridge allows for adjustment in overall bridge height and individual string length. Height is adjustable up and down by means of thumb wheels under the bridge at either end. Each string saddle is adjustable forward and back with a small standard screwdriver .
18 The tune-o-matic bridge was designed to adjust for string changes (gauge or type) and other physical changes but not for problems with intonation due to string wear . Should a string lose its intonation due to wear , we strongly recommend changing the string and not the bridge setting.
19 CARE AND MAINTENANCE Finish. A Gibson instrument always attracts attention, whether it is on a concert stage before thousands or on a guitar stand in a home studio. After the classic body lines of a Gibson, the finish makes the strongest impression.
20 Heat and cold: Gibson’ s nitrocellulose finish can expand or contract to adjust to extreme tem- peratures and humidities—but not to sudden changes in temperature or humidity .
21 Avoid sharp blows to any part of your instrument. Be particularly alert to possible blows to the back of the headstock, machine heads (tuners), and in the neck heel area. Many headstock breaks are the result of a guitar being knocked over or dropped while it’ s still in the case, so do not stand the case on its end.
22 When changing strings, we recommend changing one string at a time in order to maintain ten- sion on the neck and bridge. The pressure of the strings holds the bridge and saddles in place, and removing all the strings could necessitate a new setup. Use high quality strings.
23 2. Be certain the string is wrapped around the tuner post an adequate number of times. For unwound strings, at least five turns around the machine head stem are necessary . For wound strings, two or three turns are adequate. What gauge strings should be used? Y our Gibson guitar comes strung with “10s”—which means the high-E string is .
24 NEW TECHNOLOGY - THE GIBSON ROBOT GUITAR The Impossible is Now Possible. Introducing the Gibson Robot Guitar , the world’ s first guitar with robot technology . Gibson’ s Robot Guitar is the only guitar available with the auto-tuning system described herein as original equipment.
25 THE MASTER CONTROL KNOB (MCK) The Master Control Knob not only serves as the master control for all aspects of this amazing, self-tuning system, but it will communicate with you as you learn its “language.
26 The MCK’ s LED display will show various symbols and colors and these will be explained in the various modes of operation available to you. During the tuning process, they will behave as follows:.
27 PRECAUTIONS: • Never try to manually turn the tuning pegs on the Powerheads unless they are in the disengaged position (pulled out and away from the peghead). • Do not attempt to open the cover of the peghead electronics, the Powerheads, or the body CPU as this will void your warranty .
.
.
30 GUIDE TO FUNCTIONS AND DISPLA Y MODES DURING TUNING OPERATIONS Function MCK Position Display LEDs Action Remarks Instantly Activated T uning (440Hz, EADGBE is factory default) Regular T uning 440Hz.
31 Function MCK Position Display LEDs Action Remarks DADGAD T uning 440Hz, DADGAD Dropped D T uning 440Hz, DADGBE Delta Blues T uning 440Hz, DGDGBD Pull MCK out and turn to A LED Pull MCK out and turn.
32 Function MCK Position Display LEDs Action Remarks E Flat T uning 440Hz, EbAbDbGbBbeb Double Dropped D T uning DADGBD Pull MCK out and turn to B LED Pull MCK out and turn to e LED B LED shining blue.
33 Function Display LEDs Action Remarks Reference T uning (T une to selected reference pitch) Pull MCK out and turn to I LED I LED shining red Pull out (disengage) the peg of the Powerhead you choose to tune to a reference pitch. Now tune this string to match your chosen ref- erence.
34 Function Display LEDs Action Remarks Custom Altered T uning Pull MCK out and turn to Peg LED T o create your own ”Custom Altered T uning,” disengage each Powerhead of the string required and tune it manually to the pitch you want. Then press the display once, and the Peg LED will shine green and the string LEDs will shine red.
35 Function MCK Position Display LEDs Action Remarks String Up Mode String Down Mode Pull MCK out and turn to Revolving Arrow LED Pull MCK out and turn to Revolving Arrow LED Revolving Arrow and # LED shine green Revolving Arrow and # LED shine green Activate String Up Mode by pressing the display for 3 seconds.
36 TO RESTRING YOUR ROBOT GUITAR First ensure that all Powerheads are disengaged by pulling the pegs away from the peghead. This is very important! T urn each peg so that the post-hole is roughly in line with each corresponding string as it leaves the nut of your guitar .
37 TO ACTIV A TE STRING UP MODE FOR A SINGLE STRING (as in the case of replacing a string broken while playing) Install the string in the manner described above (remember saddle contact is crucial!). Simply select the LED for the string you are replacing, turn to the green revolving arrow and toggle it from green to red and back to green.
38 Function MCK Position Display LEDs Action Remarks Intonation Mode Activate Intonation Mode by pressing the display for 3 seconds. Strum one of the strings until the according LED shines green. For example, D. After 2 seconds b LED turns off and # LED shines green Pick the same string now in the 12th fret and strum it.
39 Function MCK Position Display LEDs Action Remarks Intonation Mode For each green LED turn the screw half turn clockwise For each red LED turn the screw half turn counter - clockwise Now a colored blink code displays the appropriate correction for the intonation screw .
40 Function Display LEDs Action Remarks Calibration Mode Pull MCK out and turn to C LED C LED shines red Access Calibration Mode by pressing the display for 3 seconds. The C LED will shine blue. Now turn the MCK to select your funda- mental frequency from the following list.
41 PLEASE NOTE: Once you have selected your desired fundamental, press the display down for three seconds. Now choose a tuning and strum the strings. The Global Calibration Offset is applied to each selected tuning. T o check the selected Global Calibration Offset, pull MCK out and press LED C for three seconds.
42 Function MCK Position Display LEDs Action Remarks Enter Setup Mode Pull MCK out and turn all the way down to “0” (counter -clockwise) b and # shine red Pr ess display for 3 seconds. When the display turns blue, release the display button. Now press the display again for 3 seconds.
43 Function MCK Position Display LEDs Action Remarks Exit Setup Mode without saving changes Exit Setup Mode; saving changes Push MCK back in Dependent on Setup Mode function last utilized Setup Mode s.
44 Restore Factory Defaults Display Software Release Enter Setup Mode and turn to LED D Enter Setup Mode and turn to E LED and press Enter LED D shining blue, Peg LED shines white Peg LED flashing seq.
45 Function MCK Position Display LEDs Action Remarks Global Calibration Offset On / Off Enter Setup Mode turn to LED C and press display once LED C shining blue, Peg LED shines white T urn MCK left (C.
46 Function MCK Position Display LEDs Action Remarks Instantly Activated Last T uning Instantly Activated Preset T uning Enter Setup Mode and turn to LED and press Enter Enter Setup Mode and turn to L.
47 Function Display LEDs Action Remarks Speed / Accuracy Settings Enter Setup Mode and turn to A LED Pegs shines white, A shines blue Press display once. Current Speed / Accuracy setting will be indicated by flashing green LEDs (as described below) The Powertune system is adjustable to a pitch accuracy of .
48 Dynamic Runtime Control On / Off eFunction Correction On / Off Enter Setup Mode turn to G LED and press Enter Enter Setup Mode and turn to B LED, press display # will be shining green or b will be .
49 CALIBRA TING POWERHEADS The Robot Guitar will be pre-calibrated for a standard .010-.046 set of strings. If you change string gauges, restore factory defaults, or are installing the system yourself, you may first want to calibrate the Powerheads individually using the Motor Calibration Mode as described below .
50 CHARGING AND BA TTERY INFORMA TION The Robot Guitar comes with a battery pack containing two rechargeable batteries. A special charger is also included with the system. The battery charge level is indicated each time you activate your system, as indicated below .
51 Charge Mode Pull MCK out, turn to C LED and press display Y our current charge level will be displayed for about 3 seconds. The level of charge will be indicated by how many green LEDs you see (betweeen 1 and 10). For optimum performance, you will want a charge level of 8-10 green flashing LEDs.
EMERGENCY CHARGE MODE The system now has an Emergency Charge Mode (ECM) if its internal rechargeable battery goes completely dead or too low in charge to run the normal Charge Function. Put MCK in the C position. Plug your patch cable into the charging device and connect and plug in the transformer .
53 SHORT CIRCUIT W ARNING In the event of a short circuit from negative to ground (Strings E or A to D or G) the white peg symbol will flash. This can be caused if strings are not trimmed properly at the headstock.If the short circuit runs from B or hi E to D, A or low E, the peg will flash yellow .
A LIFETIME OF MUSIC Y our Gibson electric guitar is a lifetime investment. With proper care, it will not only maintain its value as a top quality instrument, it will also continue to pay musical dividends for generations to come. Y our investment in the world’ s finest electric guitar is supported by the No.
55.
56.
57 NOTES ____________________________________________________________________________________________ __________________________________________________________________________________________________.
58 NOTES ____________________________________________________________________________________________ __________________________________________________________________________________________________.
59 NOTES ____________________________________________________________________________________________ __________________________________________________________________________________________________.
60 NOTES ____________________________________________________________________________________________ __________________________________________________________________________________________________.
7.
6 309 Plus Park Boulevard Nashville, TN 37217 USA 1.800.4GIBSON www .gibson.com.
デバイスGibson Guitars 1550-07 GUSの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gibson Guitars 1550-07 GUSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGibson Guitars 1550-07 GUSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gibson Guitars 1550-07 GUSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gibson Guitars 1550-07 GUSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gibson Guitars 1550-07 GUSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGibson Guitars 1550-07 GUSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gibson Guitars 1550-07 GUSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGibson Guitars 1550-07 GUSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
