GigabyteメーカーGN-FE605(M)の使用説明書/サービス説明書
ページ先へ移動 of 62
GN-FE605(M) PCI Adapter User’s Guide i GN-FE605(M) 10/100 Fast Ethernet PCI Adapter User’s Guide http://www .gigabyte.com.tw Rev . 1.0 First Edition.
GN-FE605(M) PCI Adapter User’s Guide ii Contents 1. SAFETY , CARE AND REGULA TOR Y INFORMA TION .................................. 1 2. INTRODUCTION.................................................................................................... 5 C ONTENTS OF Y OUR S HIPMENT .
GN-FE605(M) PCI Adapter User’s Guide 1 1. Safety, Care and Regulatory Information Important safety information Read and follow all instructions marked on the product and in the documentation before you operate your sy stem. Retain all safety and operating instructions for future use.
GN-FE605(M) PCI Adapter User’s Guide 2 Precautions for Products With Modems, Telecommunications, or Local Area Network Options Observe the following guidelines when working with options: Do not connect or use a modem or te lephone during a lightning storm.
GN-FE605(M) PCI Adapter User’s Guide 3 FCC part 68 (app licable to pr od ucts fitted with USA modems) The modem com plies with Part 68 of the FC C Rules. On thi s equipment is a label that contains, among other informat ion, the FCC reg istration number and Ringer Equ ivalence Number (REN) for this equipmen t.
GN-FE605(M) PCI Adapter User’s Guide 4 company cause to request the user to disconnect the equipment. Users should ensure for their own pro tection th at the electr ical ground co nnections of the power utility, telephone lines and internal met allic water pipe system, if resent are connected to gether.
GN-FE605( M) PCI Adapter Us er’s Guide 5 2. Introduction W elcome to the Gigabyte GN-FE605(M) 10/100 Fast Ethernet PCI Adapter User ’ s Guide. Before start, please ch eck your Ethernet Card is GN-FE605 or FE605M.
GN-FE605(M) PCI Adapter User’s Guide 6 GN-FE605(M) Fast Ethernet PCI Adapter Indicator Description The faceplate on the 10/100 BASE-T NIC provides an RJ-45 connector for connecting the card to another network device.
GN-FE605(M) PCI Adapter User’s Guide 7 3. Adapter Specifications Feature V alue Interfaces 10/100-T Full/Half Duplex MAC Crossover Auto MDI/MDIX Controller-P rocessor VIA-VT6105(M) PCI Bus support PCI 2.2/2.1 Communication Standard IEEE 802.3 10 Base-T Ethernet IEEE 802.
GN-FE605(M) PCI Adapter User’s Guide 8 4. Key Features GN-FE605(M) 10/100 Fast Ethern et PCI Adapter contains the several features. These features provide respective advantag es to your system.
GN-FE605( M) PCI Adapter Us er’s Guide 9 5. Installation Procedures 5.1 Insert the Networking Interface Card S tep1. Switch off the computer , unplug the power cord, and remove the computer ’ s cover . S tep2. Select an unused PCI bus-master sl ot and remove its protective bracket.
GN-FE605(M) PCI Adapter User’s Guide 10 appropriate to your network operating system. Note: Before installing the networking in terface card, make sure your system meets the requirements listed for your operating system .
GN-FE605( M) PCI Adapter Us er’s Guide 11 6. Troubleshooting If you are facing any problems with the GN-FE605(M) 10/100 Fast Ethernet PCI Adapter , use the following checklists to identify a nd co rrect the problem. 1. Make sure the adapter card is fully a nd firmly seated in the slot connector .
GN-FE605(M) PCI Adapter User’s Guide 12 (B) Driver Installation For GN-FE605 Windows NT4.0 S tep1. Click the S tart button, select Setting , and Control Panel .
GN-FE605( M) PCI Adapter Us er’s Guide 13 S tep3. In the Network window , click on the “ Adapters ” tab. Click on the Add button. S tep4. From the list of network adapte rs, click on the Have Disk.
GN-FE605(M) PCI Adapter User’s Guide 14 S tep5. Insert the supplied driver CD into your CD-ROM. Enter E: (where “E” is the CD-ROM drive.) as the dr iver path and click on the OK button. S tep6. The next screen allows you to se lect a Connection T ype.
GN-FE605( M) PCI Adapter Us er’s Guide 15 S tep8. Check the “VIA VT6105 Rhine lll Fast Ethernet Adapter” under “ Network Adapters ” and click the Close button.
GN-FE605(M) PCI Adapter User’s Guide 16 S tep10. If the TCP/IP protocol ha s been installed, the IP address entry screen will appear . Enter the IP address, subnet mask, gateway address and other required values and click on the Apply button. Consult with your network administrator and if required, set DNS and WINS address as well.
GN-FE605( M) PCI Adapter Us er’s Guide 17 Windows 2000/XP Note: For the W i ndows 2000 and XP are the same driver . For the following instruction is for the W indows 2000. S tep1. Set the GN-FE605 to a PCI slot on your PC, and switch on the power of the computer .
GN-FE605(M) PCI Adapter User’s Guide 18 S tep4. Select “Search for a suitable driver for my device” and click on the Next button. S tep5. In the next window , you can specify a search location then click on the Next button.
GN-FE605( M) PCI Adapter Us er’s Guide 19 S tep6. The setup wizard reports that a driver for the device has been found. Click on the Next button to initiate driver installation. S tep7. After the file copy has completed, th e wizard reports that software for the device has been installed.
GN-FE605(M) PCI Adapter User’s Guide 20 Windows 95/98/Me Note: For the W indows 95, 98 and Me are th e same driver . For the following instruction is for the W indows 98. S tep1. Set the GN-FE605 to a PCI slot on your PC, and switch on the power of the computer .
GN-FE605( M) PCI Adapter Us er’s Guide 21 S tep3. Select “ Search for the best driver for your device ” and click on the Next button. S tep4. In the next window , you can specify the location of the driver to be installed. Insert the sup plied driver CD into your CD -ROM, and click on the Next button.
GN-FE605(M) PCI Adapter User’s Guide 22 S tep5. Click on the Next button. S tep6. W indows98 starts copying th e files. If it asks fo r certain files on W indows 98 CD-ROM, insert your W indows98 CD-ROM and specify a path. (If Drive E is your CD-ROM drive, enter e:win98.
GN-FE605( M) PCI Adapter Us er’s Guide 23 S tep7. After the file copy has completed, click on the Finish button. S tep8. Y ou will be asked to restar t the com puter . Remove the driver CD f rom the drive and click on the Ye s button to restart the computer .
GN-FE605(M) PCI Adapter User’s Guide 24 (C) Driver Installation For GN-FE605M Windows NT4.0 S tep1. Set the GN-FE605M to a PCI slot on your PC, and switch on the power of the computer . S tep2. Click the S tart button, select Setting , and Control Panel .
GN-FE605( M) PCI Adapter Us er’s Guide 25 S tep3. In the Network window , click on the “ Adapters ” tab. Click on the Add button. S tep4. From the list of network adapte rs, click on the Have Disk.
GN-FE605(M) PCI Adapter User’s Guide 26 S tep5. Insert the supplied driver CD into your CD-ROM. Enter E: (where “E” is the CD-ROM drive.) as the dr iver path and click on the OK button. S tep6. The next screen allows you to se lect a Connection T ype.
GN-FE605( M) PCI Adapter Us er’s Guide 27 S tep8. Check the “VIA VT6105M Rhine lll Fast Ethernet Adapter” under “ Network Adapters ” and click the Close button.
GN-FE605(M) PCI Adapter User’s Guide 28 S tep10. If the TCP/IP protocol has been installed, the IP a ddress entry screen will appear . Enter the IP address, subnet mask, gateway address and other required values and click on the Apply button. Consult with your network administrator and if requi red, set DNS and WINS address as well.
GN-FE605( M) PCI Adapter Us er’s Guide 29 Windows 2000/XP Note: For the W i ndows 2000 and XP are the same driver . For the following instruction is for the W indows 2000. S tep1. Set the GN-FE605M to a PCI slot on your PC, and switch on the power of the computer .
GN-FE605(M) PCI Adapter User’s Guide 30 S tep4. Select “ Search for a suitable driver for my device ” and click on the Next button. S tep5. In the next window , you can specify a search location then click on the Next button.
GN-FE605( M) PCI Adapter Us er’s Guide 31 S tep6. The setup wizard reports that a driver for the device has been found. Click on the Next button to initiate driver installation. S tep7. After the file copy has completed, th e wizard reports that software for the device has been installed.
GN-FE605(M) PCI Adapter User’s Guide 32 Windows 95/98/Me Note: For the W indows 95, 98 and Me are th e same driver . For the following instruction is for the W indows 98. S tep1. Set the GN-FE605M to a PCI slot on your PC, and switch on the power of the computer .
GN-FE605( M) PCI Adapter Us er’s Guide 33 S tep3. Select “ Search for the best driver for your device ” and click on the Next button. S tep4. In the next window , you can specify the location of the driver to be installed. Insert the sup plied driver CD into your CD -ROM, and click on the Next button.
GN-FE605(M) PCI Adapter User’s Guide 34 S tep5. Click on the Next button. S tep6. W indows98 starts copying th e files. If it asks fo r certain files on W indows 98 CD-ROM, insert your W indows98 CD-ROM and specify a path. (If Drive E is your CD-ROM drive, enter e:win98.
GN-FE605( M) PCI Adapter Us er’s Guide 35 S tep7. After the file copy has completed, click on the Finish button. S tep8. Y ou will be asked to restar t the com puter . Remove the driver CD f rom the drive and click on the Ye s button to restart the computer .
GN-FE605(M) PCI Adapter User’s Guide 36 (D) SNMP ONLY FOR GN-FE605M Introduction Network statistics and contro l inform ation are easily retrieved by using standard SNMP protocol. Network admi nistrator could us e MIB browser to get the information f rom remote host if it is SNMP protocol a vailable.
GN-FE605( M) PCI Adapter Us er’s Guide 37 SNMP service operation Install SNMP servic e in Windows 2000/XP In Microsoft windows 2000 and XP, SNMP service installation procedure is listed as the following: 1. Click Start , point to Settings , click Control Panel , double-click Add/Remove Programs , and then click Add/Remove Windows Components .
GN-FE605(M) PCI Adapter User’s Guide 38 6. In the System Setting Change dialog box, click OK to restart the system and finish the installation. Note: 1. SNMP starts automatically after sys tem restart. Install SNMP service in Windows NT4 In Microsoft windows NT4, SNMP service installation procedure is listed as the following: 1.
GN-FE605( M) PCI Adapter Us er’s Guide 39 2. In the console tree, click Services . 3. In the details pane, click SNMP Service 4. On the Action menu, click Start , Stop , or Restart .
GN-FE605(M) PCI Adapter User’s Guide 40 extension agent. 2. In the folder contains SNMP extension agent package, there are two version of setup program. 3. A Self-Extracting EXE and the VSNM P subfolder contains uncompressed setup program. 4. Double Click on the Self-Extracting EXE or the setup.
GN-FE605( M) PCI Adapter Us er’s Guide 41 Install SNMP extension agent from Gigabyte CD You can also install SNMP servic e directly from the Gigabyte CD. 1. Insert the CD into the CD-ROM dr ive. The C D autorun program starts. Click FE605M Install SNMP Service Driver .
GN-FE605(M) PCI Adapter User’s Guide 42 3. click Next . 4. Click Next ..
GN-FE605( M) PCI Adapter Us er’s Guide 43 5. Click Finish to complete Setup. Remove SNMP extension agent in Windows platform 1. Click Start , point to Settings , and click Control Panel . Double-click Add/Remove Programs. 2. In the list of installed program , choose SNMP .
GN-FE605(M) PCI Adapter User’s Guide 44 MIB-II and RMON counter support MIB-II counters Currently, GN-FE605M 10/100Mbps Fast Et hernet PCI Adapte r support most of the standard MIB-II counters. The table below lists the MIB-II interface group supported OIDs.
GN-FE605( M) PCI Adapter Us er’s Guide 45 RMON counters Currently, GN-FE605M 10/100Mbps Fast Et hernet PCI Adapte r support some of the standard RMON counters. The ta ble below lists the RMON Ethernet Statistics, History, Alarm a nd Event group supported OIDs.
GN-FE605(M) PCI Adapter User’s Guide 46.
GN-FE605( M) PCI Adapter Us er’s Guide 47.
GN-FE605(M) PCI Adapter User’s Guide 48.
GN-FE605( M) PCI Adapter Us er’s Guide 49.
GN-FE605(M) PCI Adapter User’s Guide 50.
GN-FE605( M) PCI Adapter Us er’s Guide 51 (E) NIC Control Set for GN-FE605(M) Introduction Overview NIC Control Set is a Windows platform applica tion. It provides inform ation, setting, statistics and diagnosis functions for the NIC. Add itionally, it provides multiple VLAN function for the m anagement NIC.
GN-FE605(M) PCI Adapter User’s Guide 52 Installation Hardware Requirements As the minimal configuration for a ll W indows operating systems, you must have: A PC with a 486 processor or higher and speed of at least 33 MHz, a minimum of 16 MB memory support.
GN-FE605( M) PCI Adapter Us er’s Guide 53 Fundamental Functions My Computer Display the network information of th is com puter. In “Network Component” area, all network adapters will be disp layed in it. In “Manag ement NIC” area, only NIC with management functions (e.
GN-FE605(M) PCI Adapter User’s Guide 54 Service : All network services curren tly installed in this computer Client : All network clients currently insta lled in this computer.
GN-FE605( M) PCI Adapter Us er’s Guide 55 General Display the basic information of th e NIC. (e.g. MAC Address, Link Speed, Duplex Mode, …) Setting Display and set the parameters for the NIC (e.g. Connection Type…). Note: Some of the functions are only for FE605M.
GN-FE605(M) PCI Adapter User’s Guide 56 Statistics Display all the statistics information of the NIC (e.g. counter of frames with Tx OK, counter of frames with Rx OK…).
GN-FE605( M) PCI Adapter Us er’s Guide 57 About Manufacture contact information. Advanced Management Functions(Only For FE605M) VLAN settings VLAN setting in NIC Control Set only supported in management adapters (e.
GN-FE605(M) PCI Adapter User’s Guide 58 Setting for add/remove VLAN User should specify VLAN ID and VLAN name in the dialog box. VLAN01 (VLAN ID = 1) added VLAN01 (VID = 1) will be displayed in VLAN area in NIC Control Set.
GN-FE605( M) PCI Adapter Us er’s Guide 59 Driver setting changed by NIC Control Set NIC Control Set will enable 802.1p/Q Tagging automatically if VLAN is created in VT6105M: Remove VLAN/Change VLAN .
GN-FE605(M) PCI Adapter User’s Guide 60 8. Limited Warranty 1-Y ear W arranty Gigabyte warrants to the original consumer /purchaser that the adapter prod uct free from defects in material and workmans hip for no limited tim e from the original manufactory shipment date.
デバイスGigabyte GN-FE605(M)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gigabyte GN-FE605(M)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGigabyte GN-FE605(M)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gigabyte GN-FE605(M)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gigabyte GN-FE605(M)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gigabyte GN-FE605(M)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGigabyte GN-FE605(M)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gigabyte GN-FE605(M)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGigabyte GN-FE605(M)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
