Go-VideoメーカーTW1730の使用説明書/サービス説明書
ページ先へ移動 of 72
TW1730 User ’ s Guide 17" L CD TV.
2 Wa rning! Important Safety Instructions Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER VICEABLE P AR TS INSIDE. REFER SER VICING TO QUALIFIED SER VICE PERSONNEL. This symbol indicates high voltage is present inside.
3 Important Safety Information Safety Instructions Always be careful when using your LCD TV . T o reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.
4 Important Safety Information Safety Instructions •A void overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power cir cuits or where it can fall into such power lines or circuits.
5 FCC Information Safety Instructions User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
6 Contents Contents W arning! Important Safety Instructions ....................................................... 2 Important Safety Information ....................................................................... 3 FCC Information ..............
7 Using the Display Ergonomically ● When Using as a Computer Display • Adjust the LCD screen so that it faces slightly downward from your eyes, and maintain a distance of at least 15 inches from your eyes to the panel.
8 Using an LCD Mounting Arm Mounting Arm Requirements Y ou can use a variety of wall mount arms with your LCD TV . However , they must meet the following require- ments: ● Must comply with VESA Mount Interface 75mm standard. ● Must be able to sustain the weight of the LCD TV .
9 Care and Maintenance Maintenance of the Exterior Cabinet ● Use a soft, dry cloth. If the surfaces are extremely dirty , use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner , as these might damage the surface of the unit.
10 LCD TV Overview Before Using the TV Front View 1 MENU : Brings up the on-screen menu. 2 VOLUME : Increases or decreases the volume. Also use to select the “Return/Menu” item in the on- screen menu. 3 Standby Light : Lights when unit is in Standby mode.
11 Before Using the TV Rear Panel Jacks 1 POWER INPUT CONNECTOR : Connect ONL Y to the AC adapter supplied with this product. 2 PC VIDEO INPUT JACK : Connect to a PC monitor output. 3 PC AUDIO INPUT JACK : Connect to a PC audio output. 4 COMPONENT/HD VIDEO (Y , Pb, Pr) INPUT JACKS : Connect to a DVD player or a DTV receiver .
12 Remote Control Before Using the TV 1 POWER : T urns the TV on and of f. 2 MUTE : T emporarily mutes the sound. 3 LINE: Displays the Composite or S-Video Input. 4 PC: Displays the PC Input. 5 COMPONENT : Displays the Component Video Input. 6 NUMBER BUTTONS : Selects channels directly on the TV .
13 Before Using the TV Installing Batteries in the Remote Control The remote control does not work properly! Slide off the cover in the direction of the arrow . Install two AAA size batteries according to the correct polarity . Close the cover in the direction of the arrow .
14 Connecting the TV Antenna Before Using the TV If you do not have a cable system, you will need to connect an antenna to your TV . Connect the TV antenna cable.
L - AUDIO - R PHONES S-VIDEO VIDEO L - AUDIO - R S-VIDEO VIDEO To TV ANT LINE INPUT 15 Connecting a VCR or DVD Player Connections Connecting the Video/S-V ideo and Audio Jack Do not connect the Video cable and the S-V ideo cable at the same time. Y ou should connect only one cable at a time.
16 Connections Connecting the Antenna Input Jack To TV ANT Channel 12 L - AUDIO - R ANTENNA INPUT S-VIDEO VIDEO LINE INPUT Connection Procedures VCR RF Cable Connect the antenna cable to the ANTENNA IN terminal on the back of the VCR. Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV .
17 Connecting a DTV Receiver Connections Connection Procedures Y Pb Pr L - AUDIO - R COMPONENT/HD INPUT Y Pb Pr L - AUDIO - R ANT Connect the COMPONENT/HD INPUT jack on the TV and the component video output jack of your DTV receiver with the component video connectors (Y , Pb, and Pr).
18 Connecting an STB Receiver Connections Connection Procedures L - AUDIO - R PHONES S-VIDEO VIDEO LINE INPUT L - AUDIO - R S-VIDEO VIDEO To TV ANT Connect your STB receiver antenna cable to the antenna signal input jack on the STB receiver tuner .
19 Connecting a CA TV Receiver Connections L - AUDIO - R PHONES S-VIDEO VIDEO LINE INPUT L - AUDIO - R VIDEO To TV ANT Connection Procedures Connect the cable TV antenna cable to the antenna input jack of the cable TV receiver .
20 Connections Connecting the Antenna Input Jack Channel 34 L - AUDIO - R ANTENNA INPUT S-VIDEO VIDEO LINE INPUT L - AUDIO - R VIDEO To TV ANT Connection Procedures Connect the cable TV antenna cable to the ANTENNA IN jack on the back of the cable TV receiver .
21 Check Before Using Procedures for Using the TV Please go through the following check list before using the TV . Is the antenna cable connected properly? Are the remote control batteries installed properly? Have the channels been memorized? Refer to page 24.
22 W atching TV Procedures for Using the TV T urning the TV On and Off Rotate the power switch on the front panel downward to turn on the unit. ● When you turn the power ON, the screen appears and the POWER/ST ANDBY light is turned off. ● When you turn the power OFF , the screen goes blank, and the POWER/ST ANDBY light turns on.
23 V iewing the Status Information Press the DISPLA Y button on the r emote control. The TV will display the input sour ce, picture mode, sound mode, MTS mode, curr ent time, V -chip, and audio signal you are listening to. Adjusting the V olume ● Adjust the volume using the VOL+/– buttons.
24 Memorizing Channels Procedures for Using the TV The LCD TV can memorize and store all available channels for both antenna and cable TV . After the channels are memorized, use the TV CH+ /– buttons to scan through them. This eliminates the need to change channels using the number keys.
25 Procedures for Using the TV Storing Channels in Memory (Automatic Method) The TV automatically searches for all available channels and stores them to memory . This takes approximately one or two minutes. First, select the correct signal source (TV , CA TV).
26 Procedures for Using the TV Adding and Erasing Channels (Manual Method) Y ou can use this function to add channels and to delete unwanted channels after the auto channel search is complete. Press the MENU button. ● The OSD MENU is displayed. Select CHANNEL SETUP using the TV CH+/- buttons and then press the VOL+ button.
27 Procedures for Using the TV Changing Channels Y ou can change channels on your LCD TV by using the TV CH+/- buttons, or by direct selection using the number buttons. Y ou can use the number buttons to tune to any channel (even one that has been erased or has not been memorized).
28 If Picture Quality is Poor or Unstable Operation Use fine tuning to adjust a particular channel for better picture quality when noise interferes, color quality is poor , or the screen is unstable. Select the channel to tune using the numeric or channel buttons.
29 LNA (Low Noise Amplifier) Operation If the TV is operating in a weak signal area, sometimes the LNA function can improve the recep- tion (a low noise pre-amplifier boosts the incoming signal). Press the MENU button. ● The OSD MENU is displayed. Select CHANNEL SETUP using the TV CH+/- buttons and then press the VOL+ button.
30 Selecting the Picture Mode Operation Yo u can select one of four Picture Modes, or preset video adjustments. These modes include USER, ST ANDARD, DYNAMIC, or MILD. Shortcut: Press the VIDEO button. ● The video menu changes to USER ➔ ST ANDARD ➔ DYNAMIC ➔ MILD.
31 Manually Adjusting Picture Settings Operation Press the MENU button. ● The OSD MENU is displayed. Select PICTURE SETUP using the TV CH+/- buttons and then press the VOL+ button. Select the desired item to adjust using the TV CH+/- buttons and then press the VOL+ button.
32 Selecting the Sound Mode Operation Y ou can select one of four Sound Modes, or preset audio adjustments. These modes include USER, ST ANDARD, MUSIC, or SPEECH. Shortcut: Press the AUDIO button. ● The Sound Mode changes to USER ➔ ST ANDARD ➔ MUSIC ➔ SPEECH.
33 Operation Y ou can adjust the audio BALANCE and EQUALIZER settings directly . Press the MENU button. ● The OSD MENU is displayed. Select SOUND SETUP using the TV CH+/- buttons and then press the VOL+ button. Select BALANCE using the TV CH+/- buttons and then press the VOL+ button.
34 Choosing a Multi-Channel Sound (MTS) Soundtrack Operation Depending on the particular program being broadcast, you can listen to Stereo, Mono, or a Secondary Audio Program (SAP). SAP audio is usually a foreign-language translation, although sometimes it has unrelated information like news or weather .
35 Changing the Screen Size Operation Y ou can adjust the screen size for each video source. Press the ASPECT button. ● The screen size changes to WIDE ➔ NORMAL ➔ ZOOM ➔ P ANORAMA (you can only select WIDE or NORMAL in Component and PC input modes.
36 V iewing Picture-in-Picture Operation Y ou can watch two video sources on the screen simultaneously . Shortcut: Press the ON/OFF button. ● Tu r ns the PIP screen on or off. Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button.
37 Operation Y ou can change the video source of the PIP window to any externally connected device. Shortcut: Press the SOURCE button. ● The source of the PIP window is changed to the next video signal of any externally connected device. Press the MENU button.
38 Changing the PIP Window Channel Operation When the PIP window shows normal broadcasting (TV and CA TV) channels, you can change the PIP window channel. Shortcut: Press the PIP CH+/- buttons when the PIP window is displayed. ● The PIP window channel is changed.
39 Operation Selecting Audio in the PIP Screen Mode Y ou can select the desired audio source from either the main screen, or the PIP window . Press the SOUND button. ● The audio source is changed between MAIN and SUB. When MAIN is selected: Audio from the main scr een is heard.
40 Changing the Border Color of the PIP Window Operation Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button. Select PIP SETUP using the TV CH+/- buttons and then press the VOL+ button.
41 Freezing the Picture Operation Y ou can freeze a single frame while you are watching TV . Press the FREEZE button. ● The current frame is fr ozen. Press FREEZE again to r esume. N N N N o o o o t t t t e e e e ● Even if the picture has been frozen, the audio sound continues normally .
42 Setting the Clock Operation Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button. Select TIME SETUP using the TV CH+/- buttons and then press the VOL+ button. ● The TIME SETUP OSD is displayed.
43 Setting the On/Off T imer Operation Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button. Move to TIME SETUP using the TV CH+/- buttons and then press the VOL+ button.
44 Operation T urning On At 6:10 AM Move to the Hours using the VOL+ but- ton and then set the Hour to AM 6 using the TV CH+/- buttons. Move to the Minutes using the VOL+ button and then set the Minutes to 10 using the TV CH+/- buttons. Press the VOL+ button to finish the ON TIME configuration.
45 Selecting the ON T imer Channel / V olume Operation Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button. Select TIME SETUP using the TV CH+/- buttons and then press the VOL+ button.
46 Setting the Sleep T imer Operation Y ou can have the TV shut off automatically after a desired period of time. Shortcut: Press the SLEEP button. ● The Sleep mode is changed to SLEEP OFF → SLEEP 10 → SLEEP 20 → SLEEP 30 → SLEEP 60 → SLEEP 90 → SLEEP 120 → SLEEP OFF .
47 BLUE SCREEN Function Operation Y ou can have the TV display a blue screen instead of picture noise when weak video signals are received. Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button.
48 MELODY Function Operation If the MELODY function is turned on, a melody plays whenever the TV is turned on or off. Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button.
49 RESET Function Operation Y ou can reset all TV settings to their factory defaults. Press the MENU button. ● The OSD MENU is displayed. Select FUNCTION SETUP using the TV CH+/- buttons and then press the VOL+ button. Select RESET using the TV CH+/- buttons and then press the VOL+ button.
50 V iewing Closed Caption Information Operation Y our TV decodes and displays the closed captions that are broadcast along with some television shows. These captions are usually subtitles for the hearing impaired or translations into other lan- guages.
51 Operation Select MODE using the TV CH+/- buttons and then press the VOL+ button. Select CAPTION or TEXT using the TV CH+/- buttons. ● ln caption mode, captions appear at the bottom of the screen, and they usually cover only a small portion of the picture.
52 Using the V -Chip Operation The V -Chip feature automatically blocks programming that is deemed inappropriate for children. The user must first enter a password before any of the V -Chip restrictions can be set up or changed. Note: The V -chip doesn’t function when the Picture-in-Picture is active.
For security you may wish to cut this note from your manual... 53 Operation Select CHANGE P ASSWORD using the TV CH+/- buttons and then press the VOL+ button. ● The Change Password scr een will appear . Choose any 4 digits for your password and enter them.
54 Using the V -Chip Operation Select V -CHIP using the TV CH+/- buttons and then press the VOL+ button. ● The “Enter Password” scr een will appear . Enter your 4-digit passwor d. The default password for a new TV set is “0-0-0-0.” After entering a valid password, the “V -CHIP SETUP” screen will appear .
55 Operation Select V -CHIP using the TV CH+/- buttons and then press the VOL+ button. ● The “Enter Password” scr een will appear . Enter your 4-digit passwor d. The default password for a new TV set is “0-0-0-0.” After entering a valid password, the “V -CHIP SETUP” screen will appear .
56 Using the V -Chip Operation At this point, one of the TV -GUIDELINES is selected. Press the VOL+ button: Depending on your existing setup, a letter “U” or “B” will be selected (U: Unblocked, B: Blocked). ● Press the TV CH+/- buttons to block or unblock the category .
57 Operation Select V -CHIP using the TV CH+/- buttons and then press the VOL+ button. ● The “Enter Password” scr een will appear . Enter your 4-digit password. The default password for a new TV set is “0-0-0-0.” After entering a valid password, the “V -CHIP SETUP” screen will appear .
58 Using the V -Chip Operation Repeatedly press the the TV CH+/- buttons to highlight a particular MP AA category . ● The MP AA categories are as follows. G General audience (no restrictions). PG Par ental guidance suggested. PG-13 PG-13 (Parents strongly cautioned).
59 Operation How to Continue W atching after the V -Chip Blocks a Channel If the TV is tuned to a restricted channel, the V -CHIP will block it. The screen will prompt you to “ENTER P ASSWORD.” Enter the correct password to temporarily cancel the V -Chip and resume normal viewing.
60 Connecting to a PC Operation SPK POWER DC12V VIDEO AUDIO PC INPUT Connection Procedures Connect the PC INPUT -VIDEO jack of the TV and the monitor output jack of the PC using the D-Sub cable. Connect the PC INPUT - AUDIO jack of the TV and the audio output jack of the PC with the audio cable.
61 Configuring a PC Operation The following PC screen configuration procedures may differ depending on the model of your PC. This product supports DDC (Display Data Channel) to enable the automatic configuration of the screen. PC Configuration Procedures 1.
62 Adjusting the PC Picture Quality Operation Adjusting the Frequency Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select FREQUENCY using the TV CH+/- buttons and adjust the frequency using the VOL+ button.
63 Operation Adjusting the Phase Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select PHASE using the TV CH+/- but- tons and adjust the phase using the VOL+ button. ● During adjustment, an additional adjustment window is displayed.
64 Adjusting the Picture Position Operation Adjusting the Horizontal Position Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select H_POSITION using the TV CH+/- buttons and adjust the horizontal position using the VOL+ button.
65 Operation Adjusting the V ertical Position Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select V_POSITION using the TV CH+/- buttons and adjust the vertical position using the VOL+ button.
66 PC RESET Function Operation Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select RESET using the TV CH+/- buttons and then select using the VOL+ button. ● This returns you to the factory default settings.
67 Auto Set Operation Press the MENU button. ● The OSD MENU is displayed. Select PC SETUP using the TV CH+/- buttons and then press the VOL+ button. Select AUTOSET using the TV CH+/- buttons and then select using the VOL+ button. ● The PC screen is adjusted automatically .
68 Tr oubleshooting Q & A If your TV seems to have a problem, please refer to the following troubleshooting guide before contacting a service center . If none of these tips apply , do not attempt to repair the product yourself. Call your nearest service center .
69 Q & A First try the following list of possible problems and solutions. If the symptom continues, turn the TV off, and call your nearest service center . Symptom Possible Problem Possible Solution “No input signal” message appears. V ertical bars appear.
70 Specifications The exterior design and the product specifications are subject to change without prior notice due to improvements in performance. This product is manufactured for domestic use. It may not be used in countries that have different tele- vision system types or power voltages.
A TFT LCD TV is configured to support the following 10 signal modes. A user can register up to 10 modes. Configure the PC display mode referring to the following table.
72 Who Provides the Limited W arranty During the warranty period, the GoVideo W arranty Administrator will honor LCD TV service for 90 days labor , 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage.
デバイスGo-Video TW1730の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Go-Video TW1730をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGo-Video TW1730の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Go-Video TW1730の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Go-Video TW1730で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Go-Video TW1730を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGo-Video TW1730の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Go-Video TW1730に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGo-Video TW1730デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。