GoVideoメーカーDDV2001の使用説明書/サービス説明書
ページ先へ移動 of 56
SSC.2001.051501 DDV2001 DUAL-DECK VCR USER’S GUIDE.
Congratulations... ...on your purchase of this Go-Video Dual-Deck VCR! We know you will enjoy this pr oduct for many years to come. In case warranty service is requir ed, please take a moment to attach your receipt to this manual and write down your Serial Number (located on the back panel of the VCR): __________________________________ .
i T able of Contents T ABLE OF CONTENTS SAFETY ................................................................................ iii 1 - GETTING ST ARTED 1 Unpacking ...................................................................... 1 Basic Connections .
ii Dual-Deck VCR User’ s Guide 9 - SEARCH 27 About Index Marks ....................................................... 27 Index Search/Scan ........................................................ 28 Special Search Options ..........................
iii Safety PORT ABLE CART W ARNING (Symbol provided by RET AC) SAFETY READ INSTRUCTIONS All the safety and operating instructions should be read befor e the unit is operated. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for futur e refer ence.
iv Dual-Deck VCR User’ s Guide Electrical Code, ANSI/NFP A No. 70-1984, provides information with respect to pr oper grounding of the mast and supporting struc- ture, gr ounding of the lead-in wire .
1 1 - Getting Started 1 CHECK P ACKING LIST • Dual-Deck VCR • Remote Control • T wo (2) “AA” Batteries • Coaxial Cable • User’ s Guide • Quick Reference Guide • W arranty Registrat.
2 Dual-Deck VCR User’ s Guide 1 CONNECT ANTENNA/CABLE TV Connect the coaxial cable f r om your indoor/outdoor antenna or cable TV outlet /cable box t o the “IN (FROM ANT .
3 1 - Getting Started press press or press 1 2 LANGUAGE/LANGUE 1 English 2 Français Select = 1-2 Choisir = 1-2 POWER Connect Antenna or Cable and Press MENU Searching For Channels Please W ait.
4 Dual-Deck VCR User’ s Guide REMOTE CONTROL SETUP Follow these steps to program the r emote control to operate your television*. 1 TURN ON TELEVISION Press POWER on your television. 2 ENTER CODE Press and hold the TV key on the VCR r emote control while entering the 2-digit code for your brand of television with the 0-9 keys (see table below).
5 2 - Quick T our 2 QUICK TOUR This Chapter provides an over view of the Remote Control, Fr ont Panel, Front Panel Display and On-Scr een Display . REMOTE CONTROL 0-9 While watching TV , press to select channels. While in the menu system, press to select menu items.
6 Dual-Deck VCR User’ s Guide Chapter 2 - Quick T our LCV While watching TV , press to display the last channel viewed. MENU Press to display the VCR’ s Main Menu. MUTE Press to turn the sound on and off. PLA Y/STILL Press to play the tape in the active deck.
7 2 - Quick T our FRONT P ANEL 1 POWER Press to power the VCR on and of f. 2 DECK SELECT Press to switch contr ol between Deck 1 and Deck 2. 3 COPY TAPE Press to copy the tape in Deck 1 to the tape in Deck 2 (see page 10). 4C H Press to select the next or pr evious channel.
8 Dual-Deck VCR User’ s Guide FRONT P ANEL DISPLA Y 1 DECK 1 ST A TUS INDICA TOR Lights to show you that Deck 1 is active. Also, graphically displays the status of the tape in Deck 1; e.g., Stop, Play , Rewind, etc. 2 TV/VCR INDICA TOR Lights when the Dual-Deck is in VCR mode, turns off when the Dual-Deck is in TV mode, as set by the TV/VCR key .
9 2 - Quick T our ON-SCREEN DISPLA Y 1 DA TE AND TIME When the TV View is set to Channel or Aux, the date and time are displayed at the bottom of the screen. 2 RECORD SOURCE When the TV View is set to Deck 1 or Deck 2, the Deck 1 and Deck 2 recor d sources ar e displayed at the bottom of the screen.
10 Dual-Deck VCR User’ s Guide 3 COPY This Chapter will show you how to copy tapes with your Dual-Deck VCR. T o set up the Commer cial Free Copy featur e, please see Chapter 8. BASIC COPYING NOTES • The Dual-Deck VCR cannot duplicate copy-pr otected tapes.
11 3 - Copy COPY SETTINGS NOTES • Complete Program Recor d (CPR) changes the copy speed from SP to SLP if necessary to r educe the risk of running out of tape before copying is complete. • EZ Copy : If the tape runs out in Deck 2 before copying is complete, neither tape will r ewind to alert you that a pr oblem occurred.
12 Dual-Deck VCR User’ s Guide 4 PLA Y This Chapter will show you how to play videotapes and enjoy special playback features. BASIC PLA YBACK NOTES • T apes without r ecord safety tabs can be set to play automatically when inserted; see “Auto Play/Rewind” on page 13.
13 4 - Play PLA YBACK SETTINGS Follow these steps to set the default Playback Settings for your Dual-Deck VCR. 1 OPEN MAIN MENU Press MENU. 2 SELECT “PLA YBACK SETTINGS” Press 2. 3 ADJUST PLA YBACK SETTINGS Press 1, 2, or 3 to set each of the following: 1 - Dual Playback Seq (Sequential) – T apes will play in se- quence; i.
14 Dual-Deck VCR User’ s Guide 1 INSERT T APE Insert a VHS tape with a recor d safety tab into Deck 1 or Deck 2. 2 SET RECORD SPEED Press the SP/SLP key to set the r ecord speed to: • SP – Standar d Play , for best quality . • SLP – Super Long Play , for maximum recor ding time (3 times longer than SP).
15 5 - Record RECORD SETTINGS 1 OPEN MAIN MENU Press MENU. 2 SELECT “RECORD/EDIT SETTINGS” Press 3. 3 ADJUST RECORD/EDIT SETTINGS Press 1, 2, 3, 4, 5, or 6 to set the following: 1 - Dual Recording Sequential – T apes will r ecord in sequence; i.
16 Dual-Deck VCR User’ s Guide NOTE • If you select Timer Recording without having set the clock, the “Set Clock” menu will appear . Y ou must set the Clock before you can pr ogram a Timer Recording (see page 37). 1 INSERT TAPE Insert a blank tape with a recor d safety tab into Deck 1 or Deck 2.
17 6 - Timer Record 6 SET LENGTH Use the 0-9 keys or UP/DOWN arrow keys to set the length of the event in hours and minutes. Set Length (H) Enter the hours as a 1-digit number; e.g., for one hour , press “1.” Set Length (M) Enter the minutes as a 2-digit number; e.
18 Dual-Deck VCR User’ s Guide SELECT EVENT [1-16] :01 / T o Move = Select 1 10:30 PM On Wednesdays 1 H 30 M Ch 10 Deck 1 Auto 2 - - : - - - - - - - - - - / - - - H - - M Ch - - Deck - - - 3 - - : -.
19 7 - Edit 7 EDIT This Chapter will show you how to use the 8-Scene Editor and the On-Scr een Titler to make your own home movies. Follow these steps to use the 8-Scene Editor to assemble the best scenes from your home movies. AUTOMA TIC EDITING 1 INSERT SOURCE T APE Insert your sour ce tape (original footage) in Deck 1.
20 Dual-Deck VCR User’ s Guide MANUAL EDITING 1 BEFORE YOU BEGIN — • T ur n off EZ Copy; see page 11. • T ur n off Auto Play; see page 13. 2 INSERT SOURCE TAPE Insert your source tape (original footage) in Deck 1. 3 INSERT TARGET TAPE Insert your target tape in Deck 2.
21 7 - Edit press press press COPY SETTINGS 1 Comm. Free Copy On 2 EZ Copy Off 3 Speed Matching On 4 Copy Audio Insert Off / = Move = Sel MENU = Quit 1 Copy Settings 2 Playback Settings 3 Record/Edit .
22 Dual-Deck VCR User’ s Guide ON-SCREEN TITLER Follow these steps to add titles or cr edits to your home movies using the On-Screen Titler . 1 OPEN MAIN MENU Press MENU. 2 SELECT “RECORD/EDIT SETTINGS” Press 3. 3 SELECT “SETUP TITLER MESSAGE” Press 6.
23 8 - COMMERCIAL ADV ANCE COMMERCIAL ADV ANCE This Chapter will show you how to use COMMERCIAL ADV ANCE to skip commer cials during playback of recor dings, and r emove marked commercials from copied tapes. 1 OPEN MAIN MENU Press MENU. 2 SELECT “PLA YBACK SETTINGS” Press 2.
24 Dual-Deck VCR User’ s Guide 8 CONFIRM OR CANCEL When recor ding is stopped, the VCR will alert you that, “The VCR will begin marking in 59 seconds...” • No action is requir ed to mark the commer - cials on the recor ding; simply wait 59 sec- onds for the confirmation screen to count down.
25 8 - COMMERCIAL ADV ANCE COMMERCIAL ADV ANCE PLA YBACK Follow these steps to automatically skip marked commercials while watching a taped TV show . 1 OPEN MAIN MENU Press MENU. 2 SELECT “PLA YBACK SETTINGS” Press 2. 3 SELECT “COMMERCIAL ADV ANCE” Press 3.
26 Dual-Deck VCR User’ s Guide Follow these steps to remove all marked commer cials while making a copy of a taped TV show . 1 OPEN MAIN MENU Press MENU. 2 SELECT “COPY SETTINGS” Press 1. 3 SET “COMM. FREE COPY” Press 1 to select fr om the following: • On – The VCR will exclude marked commer - cials while copying tapes.
27 9 - Search 9 SEARCH This Chapter will show you how to locate recor dings on your videotapes, as well as scan through the pr eviews at the start of purchased or r ented movies. Follow these steps to place Index Marks on your recor dings. ABOUT INDEX MARKS WHA T ARE INDEX MARKS? Index Marks are like bookmarks on your videotapes.
28 Dual-Deck VCR User’ s Guide press press SEARCH MENU 1 Index Search/Scan 2 Blank Search 3 Direct Time Search 4 Return to 0:00:00 5 Manual CA Playback / = Move = Sel MENU = Quit DECK ONE INDEX MENU.
29 9 - Search SPECIAL SEARCH OPTIONS 1 INSERT T APE Insert a videotape in Deck 1 or Deck 2. • If the tape has a recor d safety tab, you will see the menu at left. • If the tape is in Deck 1 and is missing the recor d safety tab, please see MOVIE ADV ANCE on page 30.
30 Dual-Deck VCR User’ s Guide NOTES • In “Find Next Preview” mode, you can still advance to the start of a movie. Simply pr ess STOP , then press SEARCH/INDEX, then pr ess 6 to select “Find Start of Movie.” • MOVIE ADV ANCE ® is a trademark of SRT , Inc.
31 Appendix A - Advanced Connections ADV ANCED CONNECTIONS This Chapter will show you how to connect additional components, such as a cable box or satellite receiver , to your Dual-Deck VCR. RF OUTPUT CHANNEL Follow these steps to change the RF Output Channel from 3 (the default) to 4 in the menu system.
32 Dual-Deck VCR User’ s Guide NOTES • A monitor TV is not the same as a computer monitor . • With the TV/Monitor TV connection, the TV/VCR button on the front panel has no ef fect.
33 Appendix A - Advanced Connections OTHER A/V HOOKUP Follow these steps to connect your Dual-Deck VCR to an external audio/video component, such as an additional VCR, laser disc player , DVD player , camcor der , satellite receiver , video game, etc.
34 Dual-Deck VCR User’ s Guide.
35 Appendix B - Custom Settings CUSTOM SETTINGS This Chapter will show you how to customize your Dual-Deck VCR experience, with settings that affect language, clock, channels, displays and mor e. LANGUAGE SETTINGS NOTE • Each time you press 7, the entir e Main Menu will be translated into English or French.
36 Dual-Deck VCR User’ s Guide AUTO CLOCK SETTINGS NOTE • If “Auto Clock Set” is off, then “Time Zone” and “Clock Set Channel” will not appear on the “Clock Settings” menu.
37 Appendix B - Custom Settings press 1 Copy Settings 2 Playback Settings 3 Record/Edit Settings 4 Channel Settings 5 VCR Settings 6 Timer Recording 7 Language/Langue / = Move = Sel MENU = Quit MAIN M.
38 Dual-Deck VCR User’ s Guide DA YLIGHT SA VINGS TIME NOTES • If “Auto Clock Set” is off, then “Time Zone” and “Clock Set Channel” will not appear on the “Clock Settings” menu. • If you ar e an Arizona resident, set “Daylight Savings” to “Of f” and set “Time Zone” to “Mountain” (see page 36).
39 Appendix B - Custom Settings CHANNEL SETTINGS Follow these steps to set all Channel Settings for your Dual-Deck VCR, including Channel Source, Add/Remove Channel, Show W eak Channels and Channel Audio. 1 OPEN “MAIN MENU” Press MENU. 2 SELECT “CHANNEL SETTINGS” Press 4.
40 Dual-Deck VCR User’ s Guide Follow these steps to customize the functionality of the Dual Deck VCR, including Child Lock, Remote Eject, Front Panel Display and On-Scr een Display . 1 OPEN “MAIN MENU” Press MENU. 2 SELECT “VCR SETTINGS” Press 5.
41 Appendix B - Custom Settings VCR SETTINGS 1 Child Lock Off 2 Remote Eject On 3 Panel Display Auto 4 Screen Display Auto 5 RF Output Channel Ch3 6 Clock Settings 7 Advanced Settings / = Move = Sel M.
42 Dual-Deck VCR User’ s Guide HELP This Chapter provides customer suppor t information, as well as a list of frequently asked questions, technical specifications, and the pr oduct warranty . TROUBLESHOOTING The chart below will help you solve common challenges with your Dual-Deck VCR.
43 Appendix C - Help SYMPTOM SOLUTION(S) Cannot recor d from cable box. • Set VCR to cable box output channel 2, 3 or 4, then select desired channel on cable box. Cannot Timer Recor d. • Set clock to correct time; see page 37. Copy speeds do not match.
44 Dual-Deck VCR User’ s Guide TECHNICAL SPECIFICA TIONS The following are the technical specifications for your Dual-Deck VCR. VIDEO SYSTEM 1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance; chrominance: converted sub system phase shift.
45 Appendix C - Help W ARRANTY DUAL-DECK VCR LIMITED WARRANTY Who Provides the Limited W arranty During the warranty period, the Go-Video W arranty Administrator will honor Dual-Deck VCR service for 90 days labor , 1 year parts from the original date of consumer pur chase.
46 Dual-Deck VCR User’ s Guide INDEX INDEX Symbols 0-9 keys 5 1-Time 17 100+ key 5 8-Scene Edit List 15, 19 A Add Channel 39 AM/PM indicator 8 Audio Outputs 32 Source 21 Audio Receiver 34 Auto Chann.
47 Index INDEX Freeze 12 French 35 Front Line Inputs During Copy Audio Insert 21 Front Panel 7 Front Panel Display 8 H Help 42 I Index Marks Automatic 27 Defined 27 Manual 27 Initial Setup 1 J Jet Sea.
48 Dual-Deck VCR User’ s Guide Timer indicator 8 Timer Recording 16 Other Sources 33 Timer Recording Err ors 18 Titler Message, Recording 22 Titler , On-Screen 15, 22 T racking Auto 12 Manual 12 T r.
DDV2001 MENU SYSTEM 4 CHANNEL SETTINGS Ch05 Channel Source Auto Auto Channel Search Add Channel Show Weak Channels No Ch Up / Dn or 0 - 9 For Chan / = Move = Sel MENU = Quit 6 9 1 SELECT EVENT [1-16] .
7835 East McClain Drive Scottsdale, AZ 85260 USA www .sensoryscience.com Thank you for pur chasing this Go-Video Dual-Deck VCR! PHONE WEB E-MAIL 1-800-SENSOR Y vcrhelp@sensoryscience.
デバイスGoVideo DDV2001の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GoVideo DDV2001をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGoVideo DDV2001の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GoVideo DDV2001の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GoVideo DDV2001で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GoVideo DDV2001を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGoVideo DDV2001の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GoVideo DDV2001に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGoVideo DDV2001デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。