GoVideoメーカーDVR4000の使用説明書/サービス説明書
ページ先へ移動 of 64
SSC.4000-1.072301 D VR4000 USER’S GUIDE DVD+VCR COMBO.
Congratulations... ...on your purchase of this Go-Video DVD+VCR! We know you will enjoy this pr oduct for many years to come. In case warranty service is requir ed, please take a moment to attach your r eceipt to this manual and write down your Serial Number (located on the back panel of the DVD+VCR): __________________________________ .
i T able of Contents T ABLE OF CONTENTS Important Safety Instructions ............................................... iii 1 - GETTING ST AR TED 1 Unpacking ...................................................................... 1 Basic Connections ....
ii DVD+VCR User’ s Guide Dolby/DTS Decoder Setting ........................................ 33 Other A/V Hookup ....................................................... 34 Cable Box Hookup ....................................................... 35 Alter native Cable Box Hookup .
iii Safety PORT ABLE CART WARNING (Symbol provided by RET AC) SAFETY READ INSTRUCTIONS All the safety and operating instructions should be read befor e the unit is operated. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for futur e refer ence.
iv DVD+VCR User’ s Guide Electrical Code, ANSI/NFP A No. 70-1984, provides information with respect to pr oper grounding of the mast and supporting struc- ture, gr ounding of the lead-in wire to an .
1 1 - Getting Started 1 UNP ACK YOUR DVD+VCR As you unpack, please check that the following items ar e included in your DVD+VCR packing case: • DVD+VCR • W arranty Registration Card • User’ s Guide • Stereo A/V Cable • RF (Radio Frequency) Cable • Remote Control • 1.
2 DVD+VCR User’ s Guide 1 CONNECT ANTENNA/CABLE TV Connect the RF antenna cable from your indoor/outdoor antenna or cable wall outlet to the IN (FROM ANT .
3 1 - Getting Started NOTES • If no channels wer e found in your area, the DVD+VCR will alert you and then display the “Channel Setup” menu; see page 41. • If Auto Setup was unable to detect the time, the DVD+VCR will alert you and then display the “Set Month” menu; see page 39.
4 DVD+VCR User’ s Guide FEA TURE SUMMAR Y SYSTEM FEA TURES • Complete versatility to play DVD, VCDs, audio CDs or VHS T apes • W atch a DVD while recor ding a TV show with the VCR • Auto Setup.
5 2 - Quick T our SYSTEM/DECK SELECT KEYS POWER Press to power the DVD+VCR on and of f. TV VIEW Press to change the view on your television among all the DVD+VCR input sources: DVD, VCR, T uner , Line 1, and Line 2. DVD Press to set the r emote control to operate the DVD deck.
6 DVD+VCR User’ s Guide 12 3 456 78 9 0 100+ DVD TV VIEW VCR VOL CH SHUTTLE 3D SOUND TV/VCR TRK— AUTO TRK+ DISC MENU REC TITLE SUBTITLE AUDIO MARK SP/SLP SET TIMER RETURN SEARCH/INDEX POWER OPEN/CLOSE SETUP /ENTER ZOOM MODE REPEA T SKIP F .ADV DISPLA Y CLOCK/ COUNTER CLEAR LCV ANGLE MUTE REMOTE CONTROL (cont.
7 2 - Quick T our 12 3 456 78 9 0 100+ DVD TV VIEW VCR VOL CH SHUTTLE 3D SOUND TV/VCR TRK— AUTO TRK+ DISC MENU REC TITLE SUBTITLE AUDIO MARK SP/SLP SET TIMER RETURN SEARCH/INDEX POWER OPEN/CLOSE SETUP /ENTER ZOOM MODE REPEA T SKIP F .
8 DVD+VCR User’ s Guide 1 DVD DECK Deck used for DVD/CD playback and other DVD functions. 2 DVD OPEN/CLOSE Press to open and close the DVD deck. 3 VCR DECK Deck used for VCR playback and other VCR functions. 4 RECORD Press to start r ecording in the VCR deck.
9 2 - Quick T our 12 3 4 5 6 7 8 1 COPY Press to copy a DVD in the DVD deck to a VHS tape in the VCR deck. Note: The DVD+VCR will not copy Macrovision ® encoded DVDs. 2 CHANNEL +/– Press to select the next or pr evious channel. 3 SETUP Press to display the DVD+VCR “Setup Menu.
10 DVD+VCR User’ s Guide 1 DVD DECK INDICATOR The DVD deck is active. 2 DISC TYPE INDICATOR A DVD, CD, VCD or SVCD is loaded. 3 LPCM INDICATOR A disc with LPCM (Linear Pulse Code Modulation) audio is loaded. 4 DOLBY DIGITAL INDICATOR A DVD with a Dolby Digital 5.
11 2 - Quick T our REAR P ANEL The following is an overview of the DVD+VCR rear panel. 1 23 5 46 7 8 9 1 0 1 RF ANTENNA INPUT Connect to your antenna, cable TV , or cable box with an RF coaxial cable. 2 RF OUT TO TV Connect to your television with an RF coaxial cable.
12 DVD+VCR User’ s Guide BASIC DVD PLA YBACK 1 OPEN DISC DRAWER Press OPEN/CLOSE to automatically power on the DVD+VCR and open the disc drawer . 2 INSERT DISC Place the disc in the drawer with the label side facing up. If the disc has two sides, orient the disc with the desired label facing up.
13 3 - Basic Operations BASIC VCR PLA YBACK 1 INSERT VHS TAPE Insert a standard VHS videotape into the VCR deck. The DVD+VCR will power on automatically when you insert a tape. 2 PLA Y TAPE Press PLA Y/P AUSE . • If the tape is missing the Record Safety T ab and Auto Play is tur ned on, the tape will begin playing automatically , see page 43.
14 DVD+VCR User’ s Guide MENU NA VIGA TION The following keys are used to open and navigate through the DVD+VCR on-scr een menu system. SETUP/ENTER KEY Press to access the DVD+VCR on-scr een menu system. UP ARROW KEY Moves pointer up the list of menu items.
15 4 - Special DVD Features 4 SPECIAL DVD FEA TURES This Chapter explains some of the special featur es of DVD/CD/VCD playback. TITLE/CHAPTER/TIME SELECTION 1 VIEW DVD/CD DISPLA Y Press DISPLA Y during DVD/CD playback.
16 DVD+VCR User’ s Guide ANGLE/ZOOM press LCV ANGLE press ZOOM Follow these instructions to view a DVD movie from multiple angles, or to zoom in during playback. ANGLE Some DVDs allow you to view the same scene from dif ferent perspectives, or angles, while watching a movie.
17 4 - Special DVD Features SUBTITLES/AUDIO/3D SOUND SUBTITLES Many DVDs provide subtitles in one or mor e languages. The SUBTITLE key provides a shortcut to view and select these options. 1 While playing a DVD, press SUBTITLE. 2 Use the UP/DOWN arrow keys to select from all available subtitle languages.
18 DVD+VCR User’ s Guide REPEA T FEA TURES Follow these steps to repeat a chapter , title, or segment (A-B) or a DVD disc. REPEA T CHAPTER/TITLE Y ou can r epeat a single chapter over and over , or you can r epeat a complete title. 1 While playing a DVD, pr ess MODE/REPEA T .
19 4 - Special DVD Features press MARK SEARCH/INDEX BOOKMARKS SET BOOKMARKS 1 While a DVD is playing, press MARK. The “Mark” header will appear on the screen. 2 Use the LEFT/RIGHT arrow keys to move to one of the three bookmark placehold- ers (- - -).
20 DVD+VCR User’ s Guide RANDOM PLA YBACK Random Playback sets a random order for playback of chapters/tracks on a DVD or CD. 1 While a DVD/CD is stopped, press MODE/REPEA T . 2 Use the UP/DOWN arrow keys to move the pointer to “Random Play ,” then press the RIGHT arr ow key to select.
21 5 - Record 1 INSERT T APE Insert a VHS tape with a r ecord safety tab into the VCR deck. 2 SET RECORD SPEED Press SP/SLP to set the r ecord speed to the following: • SP – Standard Play , for best quality . • SLP – Super Long Play , for maximum r ecording time (3 times longer than SP).
22 DVD+VCR User’ s Guide RECORD SETTINGS 1 OPEN “SETUP MENU” Press SETUP/ENTER. 2 SELECT “ VCR & CHANNEL SETUP” Use the UP/DOWN arrow keys to select “VCR & Channel Setup,” then pr ess the RIGHT arrow key to select.
23 5 - VCR Recor ding COPYING FROM DVD TO VHS The DVD+VCR allows you to copy the contents of a DVD to a VHS tape with a press of the COPY button. 1 INSERT DISC Insert the disc you wish to copy in the DVD deck and close the drawer . 2 INSERT VHS TAPE Insert a VHS tape with a recor d safety tab into the VCR deck.
24 DVD+VCR User’ s Guide NOTE • If you select “Set Timer Recording” fr om the “Setup Menu” without having set the clock, the “Clock Settings” menu will appear . Y ou MUST set the clock before you can pr ogram a T imer Recording (see page 39).
25 6 - Timer Recor ding 6 SET LENGTH Use the 0-9 keys to set the length of the event in hours and minutes. Set Length (H) Enter the hours as a 1-digit number; e.g., for one hour , press “1.” Set Length (M) Enter the minutes as a 2-digit number; e.
26 DVD+VCR User’ s Guide SELECT EVENT [1-16] :01 / T o Move T o Select 1 10:30 PM On W ednesdays Ch10 1H30M Auto 2 - - : - - - - - - - - - - / - - Ch - - - H - - M - - 3 - - : - - - - - - - - - - / - - Ch - - - H - - M - - 4 - - : - - - - - - - - - - / - - Ch - - - H - - M - - .
27 7 - Search/Index SEARCH/INDEX This Chapter will show you how to locate recor dings on your VHS tapes using Index Marks. Follow these steps to place Index Marks on your recor dings. ABOUT INDEX MARKS What are Index Marks? Index Marks are like bookmarks on your videotapes.
28 DVD+VCR User’ s Guide INDEX SEARCH/SCAN 1 INSERT T APE Insert a videotape in the VCR deck. 2 OPEN “SEARCH MENU” While the tape is stopped or playing, press SEARCH/INDEX. 3 SELECT “INDEX SEARCH/SCAN” Use the UP/DOWN arrow keys to move the pointer to “Index Search/Scan,” then pr ess the RIGHT arrow key to select.
29 7 - Search/Index SPECIAL SEARCH OPTIONS 1 INSERT T APE Insert a VHS tape in the VCR deck. 2 OPEN “SEARCH MENU” While the tape is stopped or playing, press SEARCH/INDEX.
30 DVD+VCR User’ s Guide A ADV ANCED CONNECTIONS This Chapter will show you how to use the S-Video and Component outputs, as well as how to connect additional audio/video devices to your DVD+VCR. S-VIDEO/COMPONENT HOOKUP APPENDIX Follow these steps to connect the DVD+VCR to your TV using the S-Video or Component V ideo outputs.
31 Appendix A - Advanced Connections 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER. Y ou will not be able to enter the “DVD Setup” menu if a DVD is playing.
32 DVD+VCR User’ s Guide A/V RECEIVER/STEREO HOOKUP STEREO CONNECTION 1 CONNECT DVD+VCR TO STEREO Connect RCA cables fr om the ”Line Out” audio jacks (R and L) on the back of the DVD+VCR to the line inputs on your stereo r eceiver .
33 Appendix A - Advanced Connections If you connected the DVD+VCR to your A/V receiver with the Digital Audio Out AND your A/V receiver is equipped with a Dolby Digital or DTS Decoder , you must enable the correct digital output in the menu system. NOTES • Y ou MUST enable this feature in the menu system to pr event damage to your speakers.
34 DVD+VCR User’ s Guide OTHER A/V HOOKUP Follow these steps to connect your DVD+VCR to an external audio/video component, such as a camcorder , video game, etc. 1 CONNECT DEVICE TO VCR Connect RCA cables fr om the audio/video outputs of your external device to the audio/video inputs on the fr ont (Line 1) or rear (Line 2) of the DVD+VCR.
35 Appendix A - Advanced Connections 1 CONNECT CABLE TO CABLE BOX Connect an RF antenna cable from your cable wall outlet to the “In from Cable” jack on the Cable Box. 2 CONNECT CABLE BOX TO DVD+VCR Connect a second RF cable from the “Out to TV” jack on the Cable Box to the “IN (FROM ANT .
36 DVD+VCR User’ s Guide AL TERNA TIVE CABLE BOX HOOKUP Follow these steps if you have a cable box and want to be able to watch a second channel while recor ding a TV program. NOTE • With the TV/VCR button set to VCR, you should see the channel that the VCR is tuned to.
37 Appendix B - System Settings SYSTEM SETTINGS This Chapter will show you how to customize your DVD+VCR experience, with settings that affect language, clock, channels, displays and mor e. LANGUAGE SETTINGS NOTE • Each time you select the “Language/Langue/Idioma” menu, all menus will be translated into English, French or Spanish.
38 DVD+VCR User’ s Guide AUTO CLOCK SETTINGS NOTES • If “Auto Clock Set” is off, then “Time Zone” and “Clock Set Channel” will not appear on the “Clock Settings” menu. • If the DVD+VCR sets your clock incor rectly , try adjusting the T ime Zone setting.
39 Appendix B - System Settings If Auto Clock Set is not available in your ar ea, follow these steps to set the clock manually . If Auto Clock Set is available but has set the time incorr ectly , try adjusting Daylight Savings Time (page 40) and Time Zone (page 38) before setting the clock manually .
40 DVD+VCR User’ s Guide DA YLIGHT SA VINGS TIME NOTES • If “Auto Clock Set” is off, then “Time Zone” and “Clock Set Channel” will not appear on the “Clock Settings” menu. • If you ar e an Arizona resident, set “Daylight Savings” to “Of f” and set “Time Zone” to “Mountain” (see page 38).
41 Appendix B - System Settings Follow these steps to set all Channel Settings for your DVD+VCR, including T uner Band, Auto Channel Search, Add/Remove Channel and Show W eak Channels.
42 DVD+VCR User’ s Guide CHILD LOCK 1 OPEN THE “SETUP MENU” Press SETUP/ENTER. 2 SELECT “CHILD LOCK” Use the UP/DOWN arrow keys to move the pointer to “Child Lock,” then press the RIGHT arrow key to select fr om the follow- ing: • Off - Child Lock is disabled.
43 Appendix B - System Settings Follow these steps to turn on Auto Play which will play tapes auto- matically when inserted and Auto Rewind which r ewinds tapes automatically when they are done playing.
44 DVD+VCR User’ s Guide SETUP MENU Set Timer Recording Child Lock Off Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / T o Move T o Select RETURN to Quit Select VCR & Channe.
45 Appendix C - Advanced DVD Setup C APPENDIX TV ASPECT RA TIO Follow these steps to set the TV Aspect Ratio so the DVD player will display movies at the appropriate size for your television. 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER.
46 DVD+VCR User’ s Guide T o Move DVD SETUP TV Aspect Ratio 4:3PS Language/Audio Setup Rating Control [None] Still Mode Auto Black Level [Low] Alt Video Out Off / T o Select RETURN to Quit Select DV.
47 Appendix C - Advanced DVD Setup DYNAMIC COMPRESSION 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER.
48 DVD+VCR User’ s Guide RA TING CONTROL SETTINGS Follow these directions to set up a rating contr ol system for your DVD movies. NOTES • Not all DVDs ar e rated. • DVDs that ar e rated higher than the level you select will not play without entering the passwor d you set.
49 Appendix C - Advanced DVD Setup CHANGING P ASSWORD Follow these instructions to change the rating control passwor d. 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER. Y ou will not be able to enter the “DVD Setup” menu if a DVD is playing.
50 DVD+VCR User’ s Guide STILL MODE/BLACK LEVEL Follow these steps to set Still Mode (the method used to freeze a single image) and Black Level (the refer ence level for black in the video signal). 1 OPEN “SETUP MENU” Press SETUP/ENTER. • Make sure the DVD deck is stopped before pr essing SETUP/ENTER.
51 Appendix D - Help HELP This Chapter provides customer support information, as well as a list of fr equently asked questions, technical specifications, and the pr oduct warranty . TROUBLESHOOTING The chart below will help you solve common challenges with your DVD+VCR.
52 DVD+VCR User’ s Guide Poor picture quality on VCR. • Set Channel Switch to channel 4. • Adjust tracking with AUTO and TRK –/+ keys. • Clean video heads with nonabrasive head cleaning tape. Remote not working. • Remove all obstacles and point directly at DVD+VCR.
53 Appendix D - Help TECHNICAL SPECIFICA TIONS The following are the technical specifications for your DVD+VCR. INPUTS AUDIO 2 Stereo audio inputs, RCA Connector , -8dbm, 47K Ω , front and rear VIDE.
54 DVD+VCR User’ s Guide W ARRANTY Who Provides the Limited W arranty During the warranty period, the Go-Video W arranty Administra- tor will honor DVD+VCR service for 90 days labor , 1 year parts from the original date of consumer pur chase. See below for Commer cial, Industrial or Educational use coverage.
55 Index INDEX INDEX Symbols 0-9 keys 5, 6 1-Time recor ding 25 100+ key 5 16:9 Widescreen 45 3D Sound 6, 10, 17 4:3 Letterbox 45 4:3 Pan and Scan 45 A A-B Repeat 18 A/V Receiver 32 Add/Remove Channel.
56 DVD+VCR User’ s Guide INDEX M Macrovision 4 Manual Clock Set 39 Mark key 6, 19 Menu Navigation 14 Minute 39 Mode/Repeat key 6, 7, 18, 20 Monday-Friday recor d- ing 25 Mono 7 Month 39 Mute key 5 O.
DVR4000 MENU SYSTEM T o Set RETURN to Quit SETUP MENU Set Timer Recording Child Lock Off Set Clock DVD Setup VCR & Channel Setup Language/Langue/Idioma / T o Move T o Select RETURN to Quit RETRUN .
7835 East McClain Drive Scottsdale, AZ 85260 USA www .sensor yscience.com Thank you for pur chasing this Go-Video DVD+VCR! PHONE WEB E-MAIL 1-800-SENSOR Y dvdhelp@sensoryscience.
デバイスGoVideo DVR4000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
GoVideo DVR4000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGoVideo DVR4000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。GoVideo DVR4000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。GoVideo DVR4000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
GoVideo DVR4000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGoVideo DVR4000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、GoVideo DVR4000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGoVideo DVR4000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。