Gravelyメーカー915015 - 1742 ZT, 9150156 - 2048 ZTの使用説明書/サービス説明書
ページ先へ移動 of 34
Owner/Oper ator Man ual Models 915015 - 1742 ZT 915016 - 2048 ZT 015627 00 A 8/00 Supersedes 01562700 Printed in USA ZT Zer o T urn Mo wer ENGLISH FRANÇAIS ESP A Ñ OL.
.
3 ENGLISH 1. Steering Control Lev ers 2. Batter y Compar tment 3. Ignition Switch 4. P ower T ake Off (PT O) Switch 5. Throttle Control (2048) Throttle/Choke Control (1742) 6. Choke Control (2048) 7. P arking Brake Le ver 8. Attachment Lift Le ver 9. F oot Rest 10.
4 ESPA Ñ OL 1. P alancas de control de direcci ó n 2. Compar timento de la bater í a 3. Interruptor de encendido 4. Interruptor de la toma de fuerza (TDF) 5. Control del acelerador (2048) Control del acelerador/ estrangulador (1742) 6. Control del estrangulador (2048) 7.
5 Controls and Features. . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Assembl y . . . . . . . . . . . . . . . .
6 SAFETY ALERTS Look f or these symbols to point out impor tant safety precautions . They mean: Attention! P ersonal Saf ety Is In volved! Become Alert! Obey The Message! The saf ety aler t symbol is used in decals on the unit and with proper operation procedures in this manual.
7 Ne v er carr y children, e v en if mow er is disengaged. Remov e objects that could be thro wn by the b lade . Go up and down slopes , not across. Do not operate on slopes that e xceed 10 ° . • If machine stops going uphill, stop blade and back do wn slowly .
8 Only allow responsib le adults who are trained and f amiliar with the instructions to operate the machine. T raining includes actual operation. Clear the area of objects such as tree branches , rocks , to ys, wire , etc., which could be pic ked up and thro wn b y the blades .
9 K eep children out of the mo wing area and under the watchful care of another responsib le adult. Be aler t and tur n off machine if children enter the area. Bef ore and when backing up , look behind and down f or small children. Ne v er carr y children, e v en if mow er is disengaged.
10 T o ensure safe and proper operation, all parts and hardware m ust be tightened securely . Use the correct tools to ensure proper tightness. T O REMO VE TRA CT OR FR OM SKID 1. Remov e all accessib le loose par ts from shipping car ton. 2. Remov e top and sides of crate .
11 CONTROLS AND FEA TURES Operator Presence System Y our tractor is equipped with an operator presence s witch. When engine is running, any attempt b y the operator to lea v e the seat, without fi rst disengaging attachment and placing the Steering Control Lev ers in neutral, will shut off the engine .
12 Neutral Lock T o star t, loc k unit in neutral b y pushing both T ra v el-Steering Control Le v ers outward – to each side – from centered (neutral) position. Straight Forward Push the T ra v el-Steering Control Le v ers SLO WL Y f orward the same distance from the centered (neutral) position.
13 Attachment Lift Le ver Lock AL W A YS engage the attachment Lift Le v er Lock when removing or ser vicing the mower dec k. Lift le v er can spring up quickly if released while mow er deck is remo v ed. Bef ore removing the mow er deck, ❶ low er the attachment lift le v er to position 1, then ❷ latch and lock the loc k pin.
14 STARTING THE ENGINE NO TE: Bef ore star ting, read w arm and cold star ting procedures below . 1. The operator must be seated. 2. T rav el-Steering Control lev ers must be in the "NEUTRAL-LOCK" position. 3. The PT O Switch must be in the "OFF" position.
15 T O OPERATE ON HILLS • Use a slow speed bef ore star ting up or do wn hills. • A v oid stopping or changing speed on hills . • If slowing is necessary , mov e T ra vel-Steering Control Le v ers to slow er position.
16 MULCHING OPERA TION (OPTIONAL) The special mulching b lades and baf fl es will allow the grass clippings to be cut man y times to reduce their size . As the grass f alls onto the lawn,it disperses into the grass and will not be noticed. Also, the m ulched grass biodeg rades quic kly and provides n utrients for the lawn.
17 1 - Change more often when operating under a hea vy load or in high ambient temperatures . 2 - Ser vice more often when operating in dir ty or dusty conditions.
18 CHECK OPERA T OR PRESENCE SYSTEM The engine should not star t unless the PT O Switch is disengaged, and the Steering-Control Lev ers are in neutral loc k position.
19 4. Slide blade onto an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade mo v es downw ard, sharpen the heavy end until the blade is balanced.
20 5. Remov e wing nut from the Battery Rod and remov e the rod. 6. Disconnect the negativ e ( – ) cable fi rst. 7. Disconnect the positiv e cable (+) second. 8. Lift the batter y out of the unit and place batter y on a bench or other well v entilated area where an acid spill will not create damage.
21 ENGINE T o access engine: 1. Unhook Engine Cov er latch. 2. Lift rear of cov er and slide out. Set cover aside . 3. T o replace cover: Slide front of co v er into slot. 4. Inser t the back edge of cov er into its suppor t brac ket. 5. Hook Engine Cov er latch securely .
22 T O REMO VE 48" MOWER DECK 1. T ur n off engine, engage parking brake and allo w hot par ts to cool. 2. Place center deck lift handle in lo west (1) position. 3. Engage Attachment Lift Lock. Pull handle out and rotate down 90 ° . Handle will spr ing into lock ed position.
23 3. Engage Attachment Lift Lock. Pull handle out and rotate down 90 ° . Handle will spr ing into lock ed position. 4. Loosen nut on rod link at front of tractor . It is not necessar y to remov e it entirely . 5. Release rod link locking br ack ets from rod link at front of deck.
24 6. Tighten height adjuster nuts . 7. Secure height adjusters with washers and hair pins. T o Adjust 42" Deck: 1. Place mow er in the number three (3) postition. 2. Place anti-scalp rollers in highest position so they do not touch the ground during adjustment.
25 BEL TS Clutch to Dec k Belt Replacement (48" Dec k) 1. Disconnect main idler spring from bolt under frame . 2. Remov e belt from electric clutch and drive pulle y . 3. Install new belt onto driv e pulley and electric clutch, checking f or belt alignment and clearance.
26 4. Remov e the loc k nut, w asher , spring, and spacer from the ey e-bolt. Discard the lock nut and inner spacer . 5. Loosen the nut on the belt adjustment brac ket. 6. Rotate belt adjustment arm out of the way , and remov e mo wer dec k belt. 7. Match marks on mower shea v es to marks on deck to properly align b lades.
27 Clutch Shaft Belt Replacement 1. Remov e transaxle belt (see procedure abo v e). 2. Remov e clutch shaft idler spring from frame. 3. Remov e clutch shaft belt from engine shea v e. 4. Remov e clutch shaft belt from clutch shea v e. 5. Install new belt onto clutch shea v e , then engine sheav e.
28 4. Adjust the rotation of the eccentrics on one or both sides of the unit so that the steering control le v ers align in the full f orward position. 5. Tighten the eccentric ’ s bolts. 6. Reinstall the side shrouds. SEAT ADJUSTMENT Lift up and tilt seat f orward to locate seat adjustment bolts on the seat plate.
29 Prepare your tr actor f or storage at the end of the season or if the tractor will not be used f or 30 da ys or more. T RACTOR / DECK IMPORT ANT : Ne v er spra y unit with water or store unit outdoors. W ater can seep into sealed bearings, which are sealed against dir t and debr is only , causing reduced component lif e.
30 PROBLEM CA USE CORRECTION Engine will not start or loses power 1. Steering-Control Lev ers not loc k ed in neutral. 2. Attachment clutch is engaged. 3. Out of fuel. 4. Engine not "CHOKED" properly . 5. Engine fl ooded. 6. Bad spark plug.
31 Engine continues to run when operator leaves seat 1. F aulty operator-presence safety s witch. 1. Contact your Grav ely Dealer . Engine “ back fi res ” when turning engine “ OFF ” 1. Engine throttle control not set at “ SLO W ” position for 30 seconds bef ore stopping engine.
32 SPECIFICA TIONS Model Number 915015 915016 Description 1742 ZT 2048 ZT Engine Manuf acturer Briggs & Stratton Engine Model Number 311777 406777 Engine P ower - HP (KW) 17 (12.7) 20 (15) Engine Operating F ast Idle Speed - RPM 3250 ±100 3300 ±100 Engine Displacement - cu.
33 2 Y ear Limited W arranty Gra vely , Division of Ariens Company warrants to the original purchaser that consumer products manuf actured b y Grav ely will be free from defects in material and workmanship for a period of two (2) years after the date of purchase.
GRA VEL Y A Division of Ariens Company 655 West Ryan Str eet P .O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www .gravely .com.
デバイスGravely 915015 - 1742 ZT, 9150156 - 2048 ZTの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Gravely 915015 - 1742 ZT, 9150156 - 2048 ZTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGravely 915015 - 1742 ZT, 9150156 - 2048 ZTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Gravely 915015 - 1742 ZT, 9150156 - 2048 ZTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Gravely 915015 - 1742 ZT, 9150156 - 2048 ZTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Gravely 915015 - 1742 ZT, 9150156 - 2048 ZTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGravely 915015 - 1742 ZT, 9150156 - 2048 ZTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Gravely 915015 - 1742 ZT, 9150156 - 2048 ZTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGravely 915015 - 1742 ZT, 9150156 - 2048 ZTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
