GrizzlyメーカーG3690の使用説明書/サービス説明書
ページ先へ移動 of 19
COPYRIGHT © 1995 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. MARCH, 1995. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTIN- UED.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
I. INTRODUCTION ................................1 II. COMMENTARY ..................................1 III. SAFETY RULES ................................2 IV. UNPACKING ......................................3 V. AIR .....................................
G3690 Grizzly Imports, Inc. - 1 - I. INTRODUCTION II. COMMENTARY The G3690 Angle Finish Nailer is designed for driving and setting clipped head finish nails in most natural and composite wood materials. It is especially suited for cabinetmaking and fas- tening trim moldings.
- 2 - Grizzly Imports, Inc. G3690 III. SAFETY RULES FOR NAIL GUNS 1. NEVER leave the gun connected to an air source when inspecting or maintaining. 2. The gun must be routinely inspected for worn or damaged parts and air leaks. If the gun is faulty, it should be removed from service and labeled, “ DO NOT USE .
G3690 Grizzly Imports, Inc. - 3 - IV. UNPACKING Carefully remove the items packed in the car- ton. It may be a good idea to save the carton and packing material in case it might be need- ed in the future. Upon removal of all items from the package, you should have: 1.
- 4 - Grizzly Imports, Inc. G3690 VI. PRE-USE CHECKS VII. OPERATIONS A. CLEANING Keep the gun nose as clean as possible. Dirt and debris have a tendency to work their way into the gun from the nose. Wipe off any dirt that collects on the outside of the gun before connecting it to the air supply.
G3690 Grizzly Imports, Inc. - 5 - VII. OPERATIONS C. CONNECTING TO AIR To connect the air hose to the air nozzle at the rear of the gun: 1. Pull back on the female hose connector sleeve. 2. Press the fitting onto the nail gun air noz- zle and release the sleeve.
- 6 - Grizzly Imports, Inc. G3690 VII. OPERATIONS D. TEST FIRING Whenever changing fastener size or composi- tion of material being fastened, the gun should be tested to ensure that the air pressure is set correctly and the gun is working properly. To test fire the gun, wear safety glasses and follow the steps below: 1.
G3690 Grizzly Imports, Inc. - 7 - VII. OPERATIONS Caution: If the gun nose is positioned too near the edge of the workpiece or is not held straight, there is a chance that the fastener will either split the workpiece or be deflected. Caution: Compressed air is exhausted out of the top, front of the gun and is directed down toward the gun nose.
- 8 - Grizzly Imports, Inc. G3690 VIII. INSPECTION WARNING: All inspections and/or any main- tenance is to be performed with the air supply disconnected from the tool. Inspect and maintain the following items daily: 1. Check the air gun for any loose bolts or air leaks.
G3690 Grizzly Imports, Inc. - 9 - IX. MAINTENANCE A. JAMMING To repair a jam: 1. Disconnect gun from the air supply. 2. Remove any fasteners remaining in the gun. 3. Open the nose by unlocking the safety clip. 4. Using needle nose pliers, remove any bent fasteners lodged in the gun nose.
- 10 - Grizzly Imports, Inc. G3690 IX. MAINTENANCE B. DAMAGED DRIVER To remove the driver: 1. Disconnect gun from the air supply and remove any fasteners from the maga- zine. 2. Loosen the 4 cap screws securing the gun cap to the gun body sequentially.
G3690 Grizzly Imports, Inc. - 11 - IX. MAINTENANCE X. TROUBLESHOOTING D. TESTING AFTER ASSEMBLY To initially test the gun after a repair pro- cedure: 1. Put on your safety glasses, reduce the regulated air pressure to 30 PSI. Do not put any fasteners into the magazine.
- 12 - Grizzly Imports, Inc. G3690 LIMITED WARRANTY Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original pur- chaser from the date of purchase. This war- ranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, acci- dents, repairs or alterations or lack of mainte- nance.
G3690 Grizzly Imports, Inc. - 13 - GRIZZLY MODEL G3690 ANGLE FINISH NAILER Operating Air Pressure: Softwood: ..........................................................................................................80 to 100 PSI Maximum Air Pressure .
- 14 - Grizzly Imports, Inc. G3690 XIV. PARTS DIAGRAM 101 112 113 434 433 433 428 42 6 301 121 123 124 125 114 114A 122 402 401 403 404 441 413 409 405 406 213 302 414 430 431 423 415 438 427 424 436 .
G3690 Grizzly Imports, Inc. - 15 - 305 PSB15M CAP SCREW M5 - 0.8 x 20 306 G2308 QUICK CONNECT 1 / 4 " NPT 401 P3690401 DRIVER GUIDE 402 P3690402 DRIVER GUIDE COVER B 403 PLW03M LOCK WASHER 6mm 404 PSB06M CAP SCREW M6 - 1.0 x 25 405 PLN01M LOCK NUT M4 - 0.
- 16 - Grizzly Imports, Inc. G3690 A Addresses ....................................................1 Air Pressure ................................................3 Air Quality ....................................................3 C Clean Air Hoses ...
デバイスGrizzly G3690の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Grizzly G3690をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGrizzly G3690の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Grizzly G3690の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Grizzly G3690で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Grizzly G3690を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGrizzly G3690の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Grizzly G3690に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGrizzly G3690デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。