GrundigメーカーGLCD4000HD, GLCD4600HDの使用説明書/サービス説明書
ページ先へ移動 of 48
COLOUR TV Cinemo GLCD4000HD Cinemo GLCD4600HD ENGLISH Grundig Helpline: 1800 509 394 Australia Grundig Helpline: 0800 450 259 New Zealand.
Installation 3 Remote control handset 4-5 Controls 4 Battery installation 5 Controls of Front panel 6 Connections of Back panel 7 Connection to External equipment 8-12 Basic operation On and Off 13 Pr.
Power This set operates on an AC mains supply , the voltage is as indicated on the label on the back cover . Never apply DC power to the set. In the event of thunderstorms or power- cuts, please pull out the aerial and mains plugs. W arning To prevent fire or shock hazard, do not expose the set to rain or moisture.
- All the functions can be controlled with the remote control handset. - Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Controls Before you use the remote control handset, please install the batteries.
EN Remote control handset Battery installation 5 -Y our remote control handset is powered by two AA type batteries. - T o insert batteries, turn the remote control handset over and remove the battery cover . - Put the two batteries into the compartment observing battery polarity .
Controls of Front panel 6 1. MAIN POWER switches the set On or Off. 2. D / E (Programme Up/Down) selects a programme or a menu item. switches the set On from standby . 3. F / G (V olume Down/Up) adjusts the volume. adjusts menu settings. 4. MENU selects a menu.
Connections of Back panel 7 EN 1. HDMI1 INPUT / HDMI2 INPUT / AUDIO INPUT / RGB INPUT SOCKETS Connect the set output socket of the PERSONAL COMPUTER to this socket. 2. AUDIO INPUT / COMPONENT INPUT (480i / 480p / 576i / 576p / 720p / 1080i / 1080p) SOCKETS 3.
Connection to External equipment 8 -Y ou can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your set and additional appliance unplugged from the mains to avoid damaging your equipment.
Connection to External equipment 9 EN - After subscribing for a local cable TV station and installing a con- verter you can watch cable TV . - For further information of cable TV , contact the local cable TV station. In using connection 1 Select programme number in programme switch of cable box.
Connection to External equipment 10 • Component Input ports Y ou can get better picture quality if you connect DVD player with component input ports as below . How to connect Connect DVD video inputs to Y , P B , P R of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO INPUT .
Connection to External equipment 11 EN Connect the signal cable from the monitor output socket of the DVD player or Set top Box to the HDMI INPUT socket of the set. Connect the audio cable from the PC to the AUDIO INPUT sockets of the set. Press the INPUT SELECT button to select HDMI1 , HDMI2 .
Connection to External equipment 12 Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the RGB INPUT sock- et of the set. Connect the audio cable from the PC to the AUDIO INPUT sockets of the set. Press the INPUT SELECT button to select PC-RGB .
13 EN Basic operation Press the F / G button to adjust the volume. If you want to switch the sound off, press the MUTE button. Y ou can cancel it by pressing the MUTE , F / G , button. Y ou can select a programme number with the D / E or NUMBER buttons.
14 - The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Press the button and then use D / E button to display each menu. 1 1 Press the OK button and then use D / E button to select a menu item.
Setting up TV stations Sound adjustment 15 EN INFO GRUNDIG 1 Settings 2 Preset list 3 Installation 4 PIP 5 Information Select and open Exit Sound 1 Sound mode 2 Balance 3 Defaults 4 Equalizer 5 SPDIF format 6 Audio mode 7 SRS 8 TV speaker Select and confirm Exit Back Press the button and then use D / E button to select the Settings menu.
Setting up TV stations Sound adjustment 16 Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Sound . Press the OK button and then use D / E button to select Balance . Press the OK button and then use F / G button to make appropriate adjustments.
Setting up TV stations Sound adjustment 17 EN Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Sound . Press the OK button and then use D / E button to select Equalizer . Press the OK button and then use D / E button to select the desired sound item.
Setting up TV stations Sound adjustment 18 Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Sound . Press the OK button and then use D / E button to select SPDIF Format . Press the OK button and then use D / E button to select Dolby D or MPEG .
19 EN Setting up TV stations Sound adjustment SRS 7 7 TV Speaker 8 8 is a trademark of SRS Labs, Inc. -T ruSurround XT technology is incorporated under license form SRS Labs, Inc. - Manufactured under license form Dolby Laboratories. Press the button and then use D / E button to select the Settings menu.
20 Setting up TV stations Picture adjustment 20 Picture 1 Defaults 2 Brightness 3 Color 4 Contrast 5 Sharpness 6 T int 7 Color temperature 8 Format Select and confirm Exit Back Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Picture .
21 EN Setting up TV stations Picture adjustment 2 2 3 3 Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Picture . Press the OK button and then use D / E button to select the desired picture option.
22 Setting up TV stations Picture adjustment 4 4 Format 16:9 H.ZOOM V .ZOOM HV .ZOOM Select and confirm Exit Back Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Picture .
23 EN Setting up TV stations T imer Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Child lock . Press the OK button and then use D / E button to select Off or On . Press the button to return to normal TV viewing.
24 Setting up TV stations T imer Clock 1 1 - Auto time is set automatically from a digital channel sig- nal. Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select Timer . Press the OK button and then use D / E button to select Clock .
25 EN Setting up TV stations T imer On/Off Time 2 2 On time Select and Edit Exit Back 04:57 TV 3 VOL 30 On The off timer automatically switches the set to standby at the preset time. Press the button and then use D / E button to select the Settings menu.
Setting up TV stations T imer 26 T ime zone (in digital mode only) 3 3 D. Saving (in digital mode only) 4 4 The digital channel signal includes information for the current time provided by the broadcasting station. Press the button and then use D / E button to select the Settings menu.
DTV option Menu (in digital mode only) 27 EN Parental Control can be used to block specific channels, ratings and viewing sources. Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select DTV option .
DTV option Menu (in digital mode only) 28 2 2 Rating menu option - No Block All programs can be watched because there is no age limitation. - R & Above (Restricted 18+) Programs are blocked for children under the age of 18. - A V & Above (Adult Audience strong violence 15+) This program contains the strong violent contents.
DTV option Menu (in digital mode only) 29 EN 3 3 Set password Change the password by inputting a new password twice. Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select DTV option .
30 DTV option Menu (in digital mode only) 4 4 Favorite This function lets you select your favourite programmes directly . Press the button and then use D / E button to select the Settings menu. Press the OK button and then use D / E button to select DTV option .
31 EN Preset list Menu Press the button and then use D / E button to select the Preset list menu. Press the OK button to display the Preset list menu. Preset list 0 ----- 1 ----- 2 ----- 3 ----- 4 ---.
32 Preset list Menu Edit channel settings ( ) 1 Edit name VHF/UHF 21 0 DK 2 T ype 3 Channel entry 4 Finetuning 5 TV standard Select and open Exit Back Select a programme to be deleted with the D / E or F / G button. Press the button to display the Edit chan- nel settings menu.
Preset list Menu 33 EN Press the D / E button to select TV standard . Press the OK button and then use D / E button to select BG , I , DK , M . Edit channel settings ( ) 1 Edit name VHF/UHF 21 0 DK 2 .
Installation Menu 34 Press the button and then use D / E button to select the Installation menu. Press the OK button and then use D / E button to select Station search . Press the OK button and then use D / E button to select TV search , DTV search , All search .
35 EN Installation Menu Y ou can switch Front Light LED on or off. Press the button and then use D / E button to select the Installation menu. Press the OK button and then use D / E button to select Front Light . Press the OK button and then use D / E button to select Light On , Light Off .
36 Other Menu Yo u don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Press the -/-- button to select the number of minutes. The display ‘ ’ will appear on the screen, followed by 10 , 20 , 30 , 60 , 90 , 120 , 180 and 240 .
37 EN Connection of PC Yo u can adjust horizontal/vertical position, clock, phase, and auto-configure, reset as you prefer . Press the button and then use D / E button to select the Installation menu. Press the OK button and then use D / E button to select PC Control .
PIP (Picture-in-Picture) Feature 38 Press the PIP button to show the sub picture. • Each press of PIP button changes the screen display as shown below . 1 1 W atching PIP - PIP lets you view 2 dif ferent inputs (sources) on your monitor screen at the same time.
PIP (Picture-in-Picture) Feature 39 EN Press the POS button. Press the POS button repeatedly until desired position is achieved. The sub pictures move clockwise. 3 3 Moving the PIP Press the SIZE button to select the desired sub picture size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
40 Information Menu (In Digital mode only) - This function shows the present screen information. Press the button and then D / E button to select the Information menu. Press the OK button and then D / E button to select Information . Press the OK button.
41 EN T eletext T eletext (or TOP text) is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. T eletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weath- er , television programmes, share prices and many other topics.
42 T eletext Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group.
43 EN Displayable Monitor Specification Note: a. If the set is cold, there may be a small “flicker” when the set is switched on. This is normal, there is nothing wrong with the set. b. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor .
Guarantee 44 GUARANTEE This guarantee is subject to the following provisions : O It is only valid within boundaries of the country of purchase; O The product must be correctly assembled and operated i.
Note 45 EN.
Note 46.
T roubleshooting Check list 47 EN Check these items and try to adjust these Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor.
P/NO : MAN07GDP109 (GPN07MA030A, GRUNDIG) PO BOX 6287 Silverwater NSW 1811 http://www .grundig.net.au Grundig Helpline: 1800 509 394 Australia Grundig Helpline: 0800 450 259 New Zealand.
デバイスGrundig GLCD4000HD, GLCD4600HDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Grundig GLCD4000HD, GLCD4600HDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはGrundig GLCD4000HD, GLCD4600HDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Grundig GLCD4000HD, GLCD4600HDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Grundig GLCD4000HD, GLCD4600HDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Grundig GLCD4000HD, GLCD4600HDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はGrundig GLCD4000HD, GLCD4600HDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Grundig GLCD4000HD, GLCD4600HDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちGrundig GLCD4000HD, GLCD4600HDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
