HaierメーカーHL42XK1の使用説明書/サービス説明書
ページ先へ移動 of 46
Please READ this manual carefully before operating your TV , and retain it for future reference. TFT -LCD TV OWNER S MANUAL ' MODEL : S HL26R1 HL32R1 HL42XR1 HL26K1 HL32K1 HL32XK1 HL42XK1 HL32P1 .
2 TV LCD-TFT Warning RISK ELECTRIC SHOCK DO NOT OPEN CAUTION ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Owner s Manual 3 Safety Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SA VE THESE INSTRUCTIONS Thank you for purchasing the Haier product. This easy-to-use manual will guide y ou in get ting the best use of your product. Remember to record the model and serial number . They are on label in back of the unit. Model number serial number Date of purchase Staple your receipt to your manual.
Introduction Owner s Manual 5 Contents War ni ng . . . . . . . . .. .. .. .. .. .. . . . . . . . . . . . . . . . . . . . . . . Sa fe ty I ns tr uc ti on s . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction Co nt ro ls . . . . . . . .
This is a simplified representation of the TV front panel, side panel control buttons and side inputs. Introduction 6 TV LCD-TFT Controls 1. MENU : Menu display. 2. INPUT : Press to the input source mode. 3. VOL +/- : Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
Back panel connections Introduction Owner s Manual 7 Connection Options 2 1 1 Y Pb Pr L R L L R R VIDEO VIDEO S-VIDEO S-VIDEO VGA VGA VGA AUDIO VGA AUDIO AUDIO AUDIO AUDIO L R DVI AUDIO DVI AUDIO AUDI.
The remote control cannot be operated unless the batteries are properly loaded. When using the remote control, aim it at the remote sensor on the TV . Introduction Universal Remote control 8 TV LCD-TFT Function introduction 1. POWER Press to turn on and of f the TV.
ANT IN ANT IN ANT IN Over-the-air TV reception quality will depend on your antenna type, antenna location and antenna positioning. External Equipment Connections Antenna Connection Multi-family Dwelli.
2 1 1 Y Pb Pr L R L L R R VIDEO VIDEO S-VIDEO S-VIDEO VGA VGA AUDIO VGA AUDIO AUDIO AUDIO L R DVI AUDIO DVI AUDIO AUDIO AUDIO 2 L R AUDIO AUDIO COMPONENT IN COMPONENT IN VIDEO IN VIDEO IN 1 A V OUT AV.
2 1 1 Y Pb Pr L R L L R R VIDEO VIDEO S-VIDEO S-VIDEO VGA VGA VGA AUDIO AUDIO AUDIO AUDIO L R DVI AUDIO DVI AUDIO AUDIO AUDIO 2 L R AUDIO COMPONENT IN COMPONENT IN VIDEO IN VIDEO IN 1 A V OUT AV O U T.
2 1 1 Y Pb Pr L R L L R R VIDEO VIDEO S-VIDEO S-VIDEO VGA VGA AUDIO VGA AUDIO AUDIO AUDIO AUDIO AUDIO L R DVI AUDIO DVI AUDIO AUDIO 2 L R AUDIO AUDIO COMPONENT IN COMPONENT IN VIDEO IN VIDEO IN 1 A V .
2 1 1 Y Pb Pr L R L L R R VIDEO VIDEO S-VIDEO S-VIDEO VGA VGA AUDIO VGA AUDIO AUDIO AUDIO AUDIO L R DVI AUDIO DVI AUDIO AUDIO 2 L R AUDIO AUDIO COMPONENT IN COMPONENT IN VIDEO IN VIDEO IN 1 AV O U T AV O U T VGA IN VGA IN HDMI IN HDMI IN ANT IN ANT IN OPTICAL OUT OPTICAL OUT How to connect 1.
When the source device(DVD pl ayer or Set Top Box) supports HDMI How T o Connect 1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).
HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Analog Audio Cable (Stereo to RCA t ype) (not supplied with the product) Installation Cable sample Owner s .
HDMI4 IN HDMI3 IN TO USE AC POWER SOURCE Use the AC polariz ed line c ord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet. Note Never connect the A C line c ord plug to other than the specified voltage. Use the attached power cord only .
Installation Owner s Manual 17 Removing the table stand and installing a wall mount bracket Remove 4X M4 screws securing the stand to the TV , then remove the stand.
Choose the Menu Language When you start using your set for the f irst time, you must select the language which will be used for displaying menus and indications. In the manual, the OSD (on screen display) may be different from your TV`s, because it is just an example to help you with the TV operation.
This TV set has two methods to set channels, which are respectively Channel Scan, Channel Skip. In this section, h ow to use the remote control to set channel i s explained. Y ou can also use buttons on the TV to set channel. Note The Channel menu will be only operated in normal TV mode.
Operation 20 TV LCD-TFT 1 Also can enter channel number directly ,eg:2-0. . Note If skip is ON on one channel, press CH+/- button, the channel will not appear . 2. Using CH+/- buttons. Press CH+ button to select a channel number in number increasing direction.
Operation Owner s Manual 21 Mode Select the mode of picture( ). Brightness This will adjust the light output of the complete picture, which will mainly affect the darker areas of the picture. Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.
Operation 22 TFT -LCD TV DNR T o adjust reduce the appearance of digitizing error by the compression: Off, Weak, Medium, Strong, Auto. Black Level Extender T o adjust the ability in the black areas detail of the picture: On and Off. White Peak Limiter T o adjust the ability in the white areas detail of the picture: On and Off.
Operation Owner s Manual 23 SAP Broadcasts Setup This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.
Operation 24 TV LCD-TFT Function menu 1. Press MENU button and then use / button to select Function menu. 2. Press / ENTER button and then use / button to select Screen Mode .
Operation Owner s Manual 25 Function menu 1. Press MENU button and then use / button to select Function menu. 2. Press / ENTER button and then use / button to select Time Setup. 3. Press or ENTER button and then use / button to select Date/Time. 4. Press / ENTER button and then use / button to select On or Off.
Operation 26 TV LCD-TFT Style Select this option to select the font style of caption display according to your own preference. Press / button to select Default or Custom . Size Select this option to select the size of caption display according to your own preference.
Operation Owner s Manual 27 Parental Control can be used to block specific channels, ratings and other viewing sources. The parental control function is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Operation 28 TV LCD-TFT 1. Press / button to select Lock item. 2. Press / button to select On or Off . Note If the Parental Lock is setting as Off, the change of the Parental Guide , MPAA Rating ,CA Eng Rating and CA Fren Rating will be no useful.
Select / Set Back EXIT Select / Set Back EXIT Select / Set Back EXIT Select / ENTER ENTER ENTER ENTER Set Back EXIT Operation Owner s Manual 29 Canadian French Language Rating Canadian English Language Rating CA Eng Rating CA Fren Rating 1. Press / button to select CA Eng Rating item.
Operation 30 TV LCD-TFT Brief Info shows the present screen information. Press DISPLAY button to show the Brief Info on the screen. Press DISPLAY button or EXIT button to exit. Brief Info Other Functions Function: Show the present screen information. Press button or EXIT button to exit.
Operation Owner s Manual 31 allows you to configure the way you choose to view the digital captioning(Off,service1,service2, service3,service4, service5 or service6). Select one of the digital service channels made available by the caption provider . There are 6 standard services.
1 .Supporting media and file format: Digital pictures (.JPG) and digital music (.MP3) files Due to differences in the file code and file mode, It is possible that some files cannot be read. 2 .Before starting operation, verify USB storage device is of FA T32 and FA T file system format.
Note Do not remove USB device from the TV until you have exited the USB mode otherwise you may damage the USB device. To play pictures and music together 1.Press button to select Music . Press ENTER to enter . 2.Press / button to select the desired music, and then press ENTER button to enter to play .
Operation 34 TV LCD-TFT Control Operation 1.Program the Controller to work with your device. 2.Changing device mode by pressing the TV DVD STB CABLE VCR AUD key . When device is set, related device LED will be on for 1 second and then be off. 3. A im the remote at the device.
Display mode 1. choose the device you wish to program. 2.To enter display mode, while press and holding ENTER key, press the INPUT key and device LED will be ON, keep the status for about 3 seconds and the LED will blink, indicating that the Controller is ready for programming, then release both keys.
Remote Control Codes Operation Universal Remote Control TV NO. Brand Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 NO.
Monivision Montgomery Ward Motorola MTC Multitech Multivision NAD NEC Netsat NET-TV Newave Nikko Norcent Noshi NTC Olevia Onwa Oppo Optimus Optoma Optonica Orion Otto Versand Panasonic Penney Philco P.
Remote Control Codes Operation DVD 250 355 330 307 280 323 361 328 349 257 258 258 025 026 027 028 078 117 172 192 342 343 319 351 332 252 164 167 223 328 281 344 249 343 340 062 079 251 381 123 323 3.
Operation Remote Control Codes 111 008 032 008 032 095 112 019 111 031 115 012 029 016 030 082 112 113 012 029 028 074 099 114 030 112 029 030 031 094 029 030 112 121 016 118 012 029 030 112 016 029 0.
Operation Remote Control Codes 076 076 036 072 067 078 027 066 083 099 077 006 007 008 009 010 011 012 017 022 023 024 025 026 040 043 047 048 049 050 052 053 055 057 085 086 088 091 096 097 000 001 0.
NO. Brand Code AUDIO Accuphase Acurus ADC Adcom Admiral ADS Aiwa Akai Alco Altec Lansing Amphion Media Works AMW Anam Angstrom Apex Arcam AudioSource Audiotronic Audiovox B & K Bang & Olufsen .
Operation Maintenance T o remove dirt or dust, wipe the cabinet with a soft, dry , lint-free cloth. Please be sure not to use a wet cloth. Cleaning the Screen Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV.
The specifications shown above may be changed without prior notice for quality improvement. 26.1X7.9 X19.7inches 662X200X501 mm 26.1X7.9 X19.6inches 662X200X500 mm 31.3X9.2 X22.9inches 796X233X582 mm 31.3X9.2 X22.9inches 796X233X582 mm 40.3X12.9 X28.7inches 1023X328X730 mm 40.
For the sake of time and cost, it is strongly recommended that you check out the problem by yourself according to the instructions listed hereunder before contacting the after-sales service for technical assistance. Note : Production of the LCD screen requires high and precision technologies.
Warranty This Haier brand product, when shipped in its original container, will be f ree from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or r.
R.
デバイスHaier HL42XK1の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Haier HL42XK1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier HL42XK1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier HL42XK1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier HL42XK1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier HL42XK1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier HL42XK1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier HL42XK1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier HL42XK1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。