HaierメーカーHWM60-10の使用説明書/サービス説明書
ページ先へ移動 of 18
Fully Automatic W ashing Machine User's manual This manual is for Please read this manual carefully before using. Retain it for future reference. HWM60-10 User's manual.
Specifications.....................................................................................the 2 nd cover Names of the parts................................................................................................1 Safety precautions ..
1 Meaning and description of the symbols Names of the par ts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user .
2 Safety precautions Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department.
3 Safety precautions Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine. Do not wash laundries with volatile materials (such as thinner, petrol etc.) The handicapped or children without care shall not use the machine.
4 Installa tion and adjustment The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine.
5 How to change the direction of the drain hose 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2.Do not trample or press the drain hose. If the drain hose is too long, cut it at mid point.
6 Water tap,suitable Water tap,not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage. 3.Loosen the screw till the water tap can be accessed.
7 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer . 3.Fasten the nut.
8 Pr eparation bef or e washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise.
9 The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity . The thickness, size, type of the cl oth will inf - luence the actual washing capacity.
10 U se the operation buttons The user selects a suitable water level depending on the load. " W ATER LEVEL"button a. Description of the function of the buttons POWER ON/OFF ST ART PA U S E .
11 U se the operation buttons b. Operating procedure and e xplanations f or the buttons POWER ON/OFF ST ART P AUSE PROGRAM DELA Y TIME WA TER LEVEL SOAK WAS H RINSE SPIN PROCEDURE ST A TUS PROGRAM ST A TUS JEANS GENTLE QUICK WASH WASH SPIN ST ANDARD After switching on, the "Sta ndard" program will be the default.
12 Even there's no water in the tub, the spinning will star t after a certain period. Do not use soak process for woolen laundries . Wash the laundries that are prone to lose colors separately from other laundries. The pulsator w ill not rotate unless the water is fille d to selecte d water level.
13 After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "" button over 2 seconds to set a delay time wash program. Refer to T he button of "" on page 10.
14 Clean After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. When washing, lint filter must be used After using, please clean it in time. Lint filter: 1.Pull upward to detach 2.
15 (If th ere's br eakdown, pl ease pu ll off t he p ower plug b efore checking) The following phenomena are no t bre akdowns sometimes. P lease confirm again before se nding it to repair. If t here ar e re al br eakdowns, p lease c ome to t he special m aintenance de partment or after-sale se rvice de partment o f our co mpany.
16 Packing list Guarantee User's manual Name Components of the water inlet hose Bottom plate T apping screws One piece Five pieces One set Quantity Fulyl automatic washing machine Lint filter One.
デバイスHaier HWM60-10の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Haier HWM60-10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier HWM60-10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier HWM60-10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier HWM60-10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier HWM60-10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier HWM60-10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier HWM60-10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier HWM60-10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。