HaierメーカーHWM90-98の使用説明書/サービス説明書
ページ先へ移動 of 20
Computerized Full-auto W ashing Machine Contents Before using Using Process Names of the parts..........................The 2nd cover Safety precautions...............................................1 Installation and adjustment.......................
.
Saf ety pr ecautions Earth The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc.
Dismantle Install Saf ety pr ecautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow . T ake special care of the children.
Inner cover shaft Outer tub cover shaft groove Outer tub cover Inner cover Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver , then lift the machine up gently .
1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way . 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. T o make smooth drainage, cut the front end of the hose slantingly .
The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water faucet, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat an d smooth.
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1.
Using process Using process 1 Pr epar a tion before washing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably .
Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity .
.
TIMES WASH RI NSE MINUTES MINUTES MINUTES SOAK DISINFECT SPI N /DISINFECT + DOUBLE DRIVE WASH WASH WITH STERILIZA TION DIGIT AL TUBE DISPLA Y INTEGRA TED WITH THE MERITS OF THREE KINDS OF W ASHERS Des.
Page 16 This function is used to protect the children and prevent them from changing the washing procedure. Push and hold the WA TER LEVEL button and SPIN/DISINFECT button, then push down the POWER ON/OFF button. The digitron displays " " . Y ou can continue setting desired washing procedures.
Page 1 1 POWER ON/OFF PROGRAM WAS H RINSE SPIN/DISINFECT TIMES Steps of using the operation buttons and description of the steps Push the "POWER ON/OFF " button to switch on the power . 2 Push the "PROGRAM" button to select suitable automatic program.
Page 9 Page 1 1 Program W ater level W ash(minutes) 1~10 About About 20 Normal About 5 1~10 About 10-14 About 25-29 3 About 2 About 6 Common 1~10 About 34-36 About 9-1 1 1~10 About 10 About 48 About 7.
ST ART TIME REMAINED(MINUTE) RESERVE(HOURS LA TER) RESERVE Push the "ST ART/P AUSE" button PA U S E 5 Close the top lid 6 Finish washing After Finishing wash alarm automatically As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid. 4.Hang up the power cord and drain hose.
There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory . Common phenomena Phenomena Explanation The spinning is intermittent when it starts. The wash procedure pauses.
P ac king list Computerized Automatic washing machine Components of the water inlet hose One Between the upper cushion of the washing machine package and the upper seal of the package carton Inside th.
Specifica tion table Model HWM90-98 Rated voltage frequency 220V -240V ~ 50Hz Rated washing / spinning capacity 9.0kg Water level/W ater quantity (about) 1/18L 2/24L 3/30L 4/36L 5/42L 6/48L 7/54L 8/60L 9/66L 10/68L Max water consumption About 120L (Highest water level; Normal program) Water Injection pressure 0.
デバイスHaier HWM90-98の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Haier HWM90-98をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier HWM90-98の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier HWM90-98の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier HWM90-98で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier HWM90-98を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier HWM90-98の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier HWM90-98に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier HWM90-98デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
