HaierメーカーNX-565の使用説明書/サービス説明書
ページ先へ移動 of 45
Before operating the unit, please read this manual thoroughly . OWNER S MANUAL ' OWNER'S MANUAL A TSC TV/AV/D VD COMBO POWER TV/DVD OPEN/CLOSE Q.VIEW INFO MUTE 12 3 4 5 6 7 8 9 9 0 0 CC P.MODE CH+ CH- VOL _ MENU OK STOP SETUP PAUSE/STEP REV FWD .
1 PRECAUTIONS FCC WARNING -This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
IMPORT ANT SAFEGUARDS 2 RISK ELECTRIC S HOCK DO N OT OPEN CAUTION ! ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BA CK). NO USER SERVICEABLE PA RT S INSIDE.
3 Important safety Instructions 17) POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power lines or circuits.
4 Important safety Instructions 23) REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
Installation Preparation for the remote control Battery installation Tips for remote operation Remove the battery cover. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
.
Using the Remote Control Q.VIEW button: DTV Audio CC P.MODE (picture mode): OK button TV Sleep button CH.LIST (channel list) GUIDE FAV .LIST (favorite list) SIZE: Aspect Ratio Control under 16:9 digit.
8 You can connect the DVD,VCR and stereo system to the output to enjoy a higher quality of picture and sound effect. ANT IN DC IN T he other video and audio equipment Connections.
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CABLE), see the Cable TV connections.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a Converter/Descrambler box, connect the 75 ohm Coaxial Cable directly to the RF IN Jack on the back of the unit.
Video Game Using the audio/video inputs If you connect the TV to a camcorder or Video Game, you can select different modes by pressing TV/AV . Press TV/AV repeatedly to select the desired mode.
Setting the language and blue screen Y ou can choose from three different languages (English, French and Spanish) for the on-screen displays. 1 Press POWER ( ) to turn on the TV. 2 Press MENU , and then press VOL+/- button to select FUNCTION menu, then press CH- button to enter.
AUTO SCAN (DTV/ATV) (When using antenna) The channels broadcasted in DTV and A TV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized. AUTO SCAN (CATV) (When using basic cable) The channels broadcasted in CATV are automatically scanned and memorized.
Channel menu SETTING SKIP 1 Press MENU , and then press VOL+/- button to select CHANNEL menu, then press CH- button to enter. 2 Press CH+/- button to select the SKIP option, then press VOL+/- button to select ON or OFF . After the programs are preset, you can skip some programs to select your favorite channels only.
You can select the channel by using either CH +/- button or Channel number buttons. How to select the channel in each way is shown below. Channel selection CABLE VHF 2-13 STD/HRC/IRC 14-36 (A) (W) 37-.
This section describes how to adjust the volume when viewing TV . The MUTE function, which is useful when you have a visitor or a phone call, will be als o described. 1 Using VOL +/- button You can adjust the audio volume with VOL +/- button on the remote control.
You can display the currently selected channel number or other information such as the audio mode on the screen for checking. In the analog mode, the currently selected channel number and the audio mode are displayed. 1 Display the channel number and the audio mode.
Video menu 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to select VIDEO Option, then press CH- button to enter . 3 Press CH+/- to select the desired option, then press VOL+/- to adjust. SETTING VIDEO 18 Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged.
Audio menu 1 Press MENU button. The main menu screen will appear. 2 Press VOL+/- button to select AUDIO Option, then press CH- button to enter . 3 Press CH+/- to select the desired option, then press VOL+/- to adjust. SETTING AUDIO 19 Volume This will adjust the sound output level.
Manual time setting You must set the time manually for ON/OFF Timer. After a power failure or disconnection of the power, the time will get lost. In this case, reset the preset time. NOTE: EXAMPLE: Setting the time to "8:30 AM" TO SET TIME 1 Press MENU.
Setting the ON/OFF timer This feature allows you to have the TV automatically turn on/off at a time. If you program 1 Press MENU. The main menu screen will appear. SETTING THE TIMER ON 21 predetermined the ON/OFF TIMER, the TV will turn on/off at the time your predetermined time.
Function menu SETTING THE NTSC CAPTION 1 . Press the MENU button and then use VOL+/- button to select the FUNCTION menu. 2 . ress CH+/- button to select NTSC CAPTION . 3 . Then use VOL+/- button to select caption: You can also press CC button on the remote control to select the desired caption.
TO REGISTER P ASSWORD An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV Corresponds to use theparental control function, you must register a password. NOTES: If you forget the password, you cannot set the .
TO CHANGE PASSWORD NOTES: If you forget the password, you cannot set the Parent Control. To avoid forgetting the password, write it down and keep it in a safe place. 5 Enter the new password using the number buttons (0-9) . 7 Press MENU until the MENU screen disappears.
To use the TV after is Parent Control activated. When the program applied to the Parental Control setting is received, enter the password. When the password is entered correctly the protection will be temporarily overridden. NOTE: The Parental Control function is activated only on programs and tapes that support the rating.
1 Enter the PARENT AL LOCK menu. TO SET THE MPAA RATING 2 Press CH+/- button to select MPAA RATING , then press VOL+ button to enter the submenu. 3 Press CH+/- button to select the desired rating.
NOTES: Captions: This closed caption mode will display text on the screen in English or another language (depending on the set- ting of the closed captions). Generally , closed captions in English are transmitted on captions CC 1 and closed captions in other languages are transmitted on Captions CC 2.
DTV caption menu SETTING CLOSED CAPTION MODE 1 Press MENU. The main menu screen will appear. 2 Press VOL+/- button to select FUNCTION then press CH- button to enter the submenu. 3 Press CH+/- button to select DTV CAPTION. 4 Press VOL+ button and then press CH+/- button to select CLOSED CAPTION .
SETTING THE DTV CAPTION STYLE The DTV caption style function lets you change the caption size and font style. 29 DTV caption menu 1 Press MENU. The main menu screen will appear. 2 Press VOL+/- button to select FUNCTION then press CH- button to enter the submenu.
SETTING THE DTV CAPTION STYLE(continue) Style Select this option to select the font style of caption display according to your own preference. Press the VOL+/- button to select Style1, Style2, Style3, Style4,Style5, Style6, Style7, Style8. Size Select this option to select the size of caption display according to your own preference.
Daylight saving time is automatically set by specially broadcasted signals. This menu item allows you to disable the automatic setting of daylight saving time. This is useful if you live in an area or state where daylight saving is not applied, but you receive channels from other areas where daylight saving signals are broadcasted.
- This activates some, but not all, electronic program guides (EPG data) when it is used and transmitted by some DTV station providers. It is only supported when receiving DTV channels. 1. Press the GUIDE button to switch on GUIDE. 2. Press the VOL+/- button to select desired program.
1 2 3 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). If you want to return to the last watched program channel 8, you can simply press the Q.VIEW button. If you want to return to channel 18, press the button again.
34 DVD Features Basic Playback Preparations 1. Press OPEN/CLOSE to open the disc tray, place a disc in the disc tray. There are two different disc sizes. Place the disc in the correct GUIDE on the disc tray. If the disc is out of the GUIDE, it may damage the disc and cause the DVD player to malfunction.
35 Advanced Playback Advanced Playback PROGRAM When playing discs, press "PROGRAM" to enter program mode. Press the digit buttons to select the program number that you want. When finished move the cursor to select "ST ART" . This will start the program playback.
36 Special Playback Functions JPEG DISC PLAYBACK MP3 PLAYBACK SCREEN SAVER FUNCTION When playing an MP3 disc, a navigation menu will be displayed automatically . In the menu, use UP or DOWN cursor buttons to choose the folder, then press PLA Y/ENTER to enter the folder.
37 DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press PLA Y/ENTER to confirm.
38 DVD System Setup(Continued) DVD System Setup General Setup Page CAPTIONS: This function allows you to display or hide the caption. SCREEN SAVER: If the screen saver is on, then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .
39 DVD System Setup(Continued) DVD System Setup The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played.
40 The following discs can be played: Playable Discs You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labelled as above. The performance of CD-R or CD-RW disc depends on the way the disc was burned.
41 Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD LD SVCD VCD CD Encode method Digital/MPEG Analog Digital Digital/ MPEG Digital Capacity 650MB 650MB 650MB 133 minutes .
Troubleshooting guide T o assist in location possible faults use help guide below . BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Ensure that the power supply is connected to the TV set and turned on.
Specifications The specifications offered you here are for reference only. With product improvement there may be some differences between the description and the final product. NOTE Design and specifications are subject to change without notice. Dimensions quoted in this manual are approximate.
01 0090500177I.
デバイスHaier NX-565の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Haier NX-565をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier NX-565の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier NX-565の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier NX-565で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier NX-565を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier NX-565の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier NX-565に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier NX-565デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。