HaierメーカーXQS70-98の使用説明書/サービス説明書
ページ先へ移動 of 19
Please read this manual carefully before using. Retain it for future reference. Double-drive Automatic W ashing Machine This manual is for XQS70-98 User's manual.
Contents Names of the parts.............. Safety precautions............................................... 2 Installation and adjustment................................ Install the water inlet hose.................................. ..6 Preparation before washing.
Water inlet valve Water absorption cushion Power cord Handle Top lid components Inner cover components Detergent box Control panel seat Outer tub cover Balance ring Attachment block 3 pieces Inner tub.
Safety precautions Earth The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc.
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the chil dren. Do not decompose, repair or alter the machine by yourself.
Inner cover shaft Outer tub cover shaft groove Outer tub cover Inner cover Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver, then lift the machine up gently .
1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.
The exit end face of the faucet Connection between the water inlet hose jointerand the water faucet water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth.
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1.
1 Pr eparation bef or e w ashing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle.
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity .
Description of the function of the buttons 4 Use the oper a tion buttons Mode and meaning of the VFD indicator Digital tube During sensing, it displays During operation of programs, it displays the remained time (minute) or remained times of the corresponding procedure The digital tube corresponding to the running program lights.
WATER LEVEL START PAUSE POWER ON/OFF PROGRAM RESERVE Reserve(hours later) Time remained(minutes) FIBRE COTTON WOOLLEN SILK QUICK POSTHASTE JEANS Page 16 10 8 6 4 2 9 7 5 3 1 NORMAL This function is used to protect the children and prevent them from changing the washing procedure.
Page 11 POWER ON/OFF PROGRAM WASH RINSE SPIN START PAUSE POWER ON/OFF PROGRAM RESERVE WATER LEVEL Reserve(hours later) Time remained(minutes) 10 8 6 4 2 9 7 5 3 1 WASH RINSE SPIN Times FIBRE COTTON WO.
Page 10 Page 12 Program Water level Wash(minutes) 1~10 About About 20 Fibre About 5 1~10 About 12 About 40 3 About 2 About 6 Normal 1~10 About 25-31 About 10-16 1~10 About 10 About 48 About 7 1~10 Abo.
START Time remained(minute) Reserve(hours later) RESERVE Push the "START/P AUSE" button PAUSE 5 Close the lid 6 Finish washing After Finishing wash alarm automatically As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid. 4.Hang up the power cord and drain hose.
There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory. Common phenomena Phenomena Explanation The spinning is intermittent when it starts. The wash procedure pauses.
Packing list 17 User's manual One One Component of the water inlet hose One One Name Quantity Bottom cover Topping screws Eight The end connecting to the washing machine Jointer connecting the wa.
デバイスHaier XQS70-98の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Haier XQS70-98をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHaier XQS70-98の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Haier XQS70-98の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Haier XQS70-98で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Haier XQS70-98を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHaier XQS70-98の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Haier XQS70-98に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHaier XQS70-98デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
