HANNspreeメーカー1506-060B000の使用説明書/サービス説明書
ページ先へ移動 of 51
1506-060B000 28” Liquid Crystal Display T elevision Téléviseur à Écran à Cristaux Liquides TV de Pantalla de Cristal Líquido.
Table of Contents 1 English Regulatory Information ... ..................................................... ........ 3 Description of Warning Sy mbols ....................... .............. ............. 4 Safety Notices .............. ..............
Table of Contents 2 English 3. Adjusting On-Screen Display (OSD ) Settings ........... ............... 2 7 3.1 OSD Setting Menus ... ............................................... ....... 2 8 3.2 Adjusting Picture Settings ........ .............. ...
3 English R e gula tor y Infor mation FCC Compliance Statement 1 This device complies with part 15 of the F CC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any in terference received, including interference that may cause undesired operation.
4 English Description of W ar ning Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WA R N I N G This symbol is us ed to alert users to pay attention to import ant descriptions regarding usage, maintenance (repair), and additional important information related to this TV .
5 English Saf ety Notices Inst allation Safety Notes Location Avoid allowing the TV to get prolonged expo sure to sunlight or other strong sources of heat. Leave sufficient di stance between the TV and the wall to provide enough space for the emission of heat.
6 English Impor tant Safety Instr uctions 1. 2. 3. 4. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
7 English 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel.
8 English Personal safety Installation 1. T o avoid overloadi ng the power s upply , never plug t oo many electr ical devices into an outl et, power strip, or exten sion cable. 2. Dangerous high-voltage electric power component s are located inside the TV .
9 English Preface Thank you for purchasing a Hannspree Liquid Crystal Display T elevision (LCD TV). Y our new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology . Please carefully read this manual in it s entirety before setting up, using or operating your TV .
10 English Copyright © Copyright 2009 Hannspree, Inc. All rights reserved. This manual is prot ected by copyright and distributed under licenses restricting its use, copying and di stribution. No part of this manual may be reproduced in any form by any means without the prior wr itten authorization of Hannspree.
11 English 1 Getting Star ted 1.1 P ackage Contents Make sure the following co mponents are included in the box. Please contact Hannspree Customer Service immediate l y if anything is missing or damaged.
12 English 1.2 Introducing th e TV Y ou can watch NTSC/A TSC broadcast, cable, or digi tal television channels, and easily connect a VCR, STB or DVD pl ayer to the standard CVBS, S-V ideo, component, and HDMI inpu t ports (locatio n of these ports depends on model).
13 English 1.3 Control Panel Description Bu tton Function Power Power button. Press to turn the T V on or off. Input source INPUT Press to open the input source list or mark an item on the OSD menu. Menu MENU Press to open the OSD menu. Channel select Press to increase the channel number or move upward to the previous item o n the OSD menu.
14 English 1.4 Inpu t and Output J acks Description Co nnector Function Power connector Connect to the included pow er cord. HDMI 1 i nput Connect to an external device, such as a DVD pl ayer , set-top box, or a PC’s DVI/ HDMI port. HDMI 2 i nput Connect to an external device, such as a DVD player , a Set-T op-Box, or a PC’s DVI/ HDMI port.
15 English 1.5 R emote Contr ol Description Icon Function Power Press to turn the T V on or off. Input source INPUT Press to open the input source list. Keypad Use to select a channel directly . Press 0-9 to enter the program numbers (press 1 and 0 for channel 10).
16 English Sleep timer Press repeatedly to set the sleep time (Sleep off, 15, 30, 45, 60, 90, or 120 minutes). A Sleep Info appears on the midd le of the screen to show the remaining time. Cancel the timer by pressing the button to sleep off mode. Mute Press to eliminate audi o.
17 English Note: • For best result s, use the remote control wit hin a proper dist ance from the front of the TV . Do not exceed an angle of 30 degrees when pointing at TV. • The operational distance may be shortened when the sign al sensor is directly exposed to strong light.
18 English 1.6 Inser ting the Remote Contr ol Batteries 1 Open the battery compartment cover at the back of the remote con trol (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Close the battery compartment cover (C).
19 English 2 Setting up your TV 2.1 Basic Connections 2.1.1 P ower Connection 1 Connect the p ower cord to the AC IN in put jack on t he rear of the TV .
20 English 2.2 Connecting Exter nal Devices Connect external devices such as VCRs, Set-T op-Box, DVD players, video game consoles, earphones, or a PC to the T V usin g the appropriate ports on the re ar of the TV . 2.2.1 Connecting Exte r nal Ear phones Note: • External speakers or headphones are not included with the TV .
21 English 2.2.2 Connecting to A V Devices or or or HDMI 1 HDMI 2 A B C AUDIO Y Pb RL P r S-VIDEO RL VIDEO P r L R HDMI Y P b S-Video R L VIDEO AUDIO Audio Cable (Optional) Video Cable (Optional ) Aud.
22 English 2.2.3 Connecting a V CR/ STB/ DVD Play er Using Component V ideo Connect the TV to a VCR/ STB/ DVD player using the compone nt video inputs. 2.2.4 Connecting a V CR/ STB/ DVD Play er Using Composite V ideo Connect the TV to a VCR/ STB/ DVD pl ayer using the composite video input.
23 English 2.2.5 Connecting a PC using V GA Connect the TV to your PC to use it as the monitor using the VGA port as shown. 1 Connect the VGA port of the TV to the VGA outp ut of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC to listen to audio from the PC.
24 English 2.2.7 Connectin g HDMI HDMI (High Definition Multimedia Interface) assures tha t the best video signal is always sent from source to the TV . Refer to the following illustration to connect an HDMI device to t he TV . Note: When the HDMI cab le is connected , conne ctin g the audio cable is not nece ssary .
25 English 2.3 Using th e TV 2.3.1 T ur ning the TV On and Of f 1 Press on the control panel or r emote control. Th e power LED indicator on the TV chan ges from red to gre en, indica ting that t he TV is on . 2 Press again. The p ower LED changes f rom green to red, indicat ing that the TV i s of f .
26 English 3 Press to eliminate sounds, and press again or pr ess the vol ume buttons to restore th e original vo lume. 2.3.6 Editing Channel T a ble or Fa vorite Channel 1 Press MENU on the control panel or remote c ontrol, then select to enter the Channel menu.
27 English 3 Adjusting On-Scr een Display (OSD) Settings The On-Screen Di splay (OSD) menu system provides a qui ck and simple meth od to adjust the TV settings. The OSD menu ca n be accessed through the butto ns either on the control panel or the remote control.
28 English 3.1 OSD Sett ing Menus Follow the instructions indicated on the bottom of the OSD Function Me nu. Press / on the control panel or / arrow keys on the remote control to scroll through the menus. press INPUT/ VOL+ on the control panel or OK key on the remote control to select an item and then press MENU/ VOL- key to exit the OSD menu.
29 English 3.3 Adj usting Audi o Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to sele ct Audio men u. 3 Press / OK on the remote control or INPUT/ VOL+ on the control p anel to enter the Audio menu .
30 English 3.4 Adjusting Channel Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the contro l panel to select Channel menu . 3 Press / OK on the remote control or INPUT/ VOL+ on the control p anel to enter the Channe l menu.
31 English 3.5 Adjusting V - CHIP Settings 1 Press MENU to enter the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the contro l panel to select V -CHIP menu. 3 Press / OK on the remote control or INPUT/ VOL+ on the control p anel to enter the V -CHIP menu.
32 English 3.6 Adj usting Setup Sett ings 1 Press MENU to ente r the OSD Main Menu screen. 2 Press / on the remote control or CH S / CH T on the control panel to select Setup m enu. 3 Press / OK on the remo te control or INPUT/ VOL+ on the control p anel to enter the Se tup menu.
33 English 4 T r oubleshooting Situation Solution No picture and sound. • Connect the power cord pro perly . • Check if the power LED is on or not. • Press on the control panel or remote control. •p r e s s INPUT to cycle through connected video sources.
34 English 5 Specifica tions LCD Panel Size 28 inch TFT Screen Format 16:10 Panel Resolution 1920 (H) x 1200 (V) T V S y s t e m AT V : N T S C D T V : AT S C Video System HDMI Input x 2 YPbPr Input x.
35 English PC Mode Support T iming Video Mode Support Timing Mode Resolution (active dot) Horizontal Frequency (KHz) V ertical Frequency (Hz) Nominal Pixel Clock (MHz) VGA DVI to HDMI VGA 640x480@60Hz 31.469 59.941 25.175 V V SVGA 800x600@60Hz 37. 879 60.
36 English 6 Ap pendix: R emote Contr ol Guide 6.1 Intr oduction The electronic equipment type switch butto ns are used for switching the current electronic equipment type on the remote control. The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE and TV .
37 English 6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” the n pressing RETURN does affect the “02” alread y input.
38 English 1. Press the correspondi ng electronic equipment bu tton. The indica tor light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the se tting mode has been entered.
39 English 4. During the setting process, releasing th e electronic equipme nt button exits the setting mode immediately without chang ing the status prior to setting. 5. Buttons other than CH+/CH- are not f unctional during search. Channel bu ttons include CH+ and CH-.
40 English 6. Default volu me lock setting: 7. Default cha nnel lock setting: Electro nic equipment VOL+, VOL- and Mute Note TV T ransmit TV code Provided by manufacturer CABLE T ransmit CABLE code Un.
41 English 6.1.7 Description There is no multi-fu nction code setting ope ra tion under TV mode but a fixed code for the TV manufacturer . Th erefore, code se tting and code-searching function s are disabled under this mode; other functions such as volume lock, channel lock and code display are operable .
42 English 6.3 Component Pr og ram Co des Setup Code f or V CR’ s ABC 2102 Admiral 2012, 2022 Aiko 2025 Aiwa 2005, 2027 Alienware 2102 America Action 2025 American High 2004 Amoisonic 2027 Anam 2020.
43 English Setup Code f or V CR’s Magnin 2024 Marantz 2004, 2016 Marta 2005 Matsushita 2 004, 2020 Media Center PC 2102 MEI 2004 Memorex 2004, 2020, 2005, 2012, 2007, 201 1, 2024, 2017, 2022, 2027 M.
44 English Setup Code f or V CR’s T ashiko 2005 Ta t u n g 2010, 2014 T echnics 2004, 2020 Te c o 2004, 205, 2012, 2006 T eknika 2004, 20 05 Tiv o 2048, 2044, 2098, 2059 TMK 2024 To s h i b a 2010, .
45 English Setup Code f or D VD’ s Norcent 2078 Onkyo 2029, 2046, 2064 Oritron 2051 Panasonic 2028, 210 1 Philips 2029, 203 6, 2050 Pioneer 2033, 2039 Polarold 2090, 2086 Polk Audio 2036 Portland 20.
46 English Setup Code f or Cable Regal 0016, 0014 Runco 000 1 Samsung 0001, 0010 Scientific Atlanta 0059, 0037, 0020, 0003 Sony 0041 S tarcom 0002, 0006 Supercable 0015 Supermax 0038 T ocom 0005 To r .
47 English Setup Code f or CD Carver 3019, 3022 Dkk 3001 DMX Electronics 3019 Dynam ic Bass 3022 Fisher 3022 Garrard 3027 Genexxa 3005 Harman/ Kardon 3019, 3020 Hitachi 3005 Integra 3013 JVC 3009 Kenw.
48 English Setup Co de for Audio Amp / T uner’s Carver 3042 Denon 3051, 3040 Fonmix 3051 Harman/ Kardon 3014 Hitachi 3047 Integra 3017 JBL 3014 JVC 3010 Kenwood 3050, 3056 KLH 3053 Magnavox 3042, 30.
49 English 7 Setting the TV on the Wall Dissembling the stand base: 1 Disconnect all the cables and cords from the TV to prevent breakage. 2 Carefully place the TV face down on a so ft and flat surface (b lanket, foam, cloth, etc) to prevent any damage to the TV .
50 English 8 Using the Cable Or ganizer Organzie your cables by routing the cable s through the cable clamp..
デバイスHANNspree 1506-060B000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HANNspree 1506-060B000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHANNspree 1506-060B000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HANNspree 1506-060B000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HANNspree 1506-060B000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HANNspree 1506-060B000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHANNspree 1506-060B000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HANNspree 1506-060B000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHANNspree 1506-060B000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
