HANNspreeメーカーWT09-12A1の使用説明書/サービス説明書
ページ先へ移動 of 61
NTSCTVTWEN1203 MAC-001 129 User's Manual 12.1" Liquid Cr ystal Display T ele vision WT09-12A1 2F , No.362, Jui-Kuang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service............................................ ........ 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............... 2 9 Brightness ............................................................ ... 3 0 Contrast ............................................................... ... 3 1 Video Setting .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you start readi ng, check your product number by looking at the rear of your TV .
4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been carefully checked for accu- racy; however , no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case th e product needs to be shipped in the future.
8 Optimal V iewing Dist ance MENU S O U R C E v o l u m e c h a n n e l B B U U n n G S 128 cm.
9 Import ant Safety Inst ructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wa ter . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point wh ere they exit from the appar atus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, ca rpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far fr om power trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital app aratus as set out in the Rad io Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liqu id Crystal Display TV . Y our LCD TV is designed to be safe, versatile, and easy to use. The design of product is based on the Bugs Bunny from Looney T unes of W arner Brothers, which makes it a fun addition to any room.
17 Make sure the following component s are included in the box. Co ntact your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guid e Wire Material Package G W .
18 Fr o n t V i e w Description Function 1 Select channel Changes the channel. Press CH + to increase the channel number . Press CH – to decrease the channel number . 2 Menu T urns the On-Screen Display (OSD) menus on and of f. 3 Signal sensor Receives signals from the remote control.
19 Input and Output P or ts Description Function 1 Antenna/cable TV line in Connects to a n antenna or CA TV cable television line. 2 DC-IN Connects to the inclu ded power adapter . 3 AV 2 Connects to the included 4-IN-1 cable. 4 Headphone line out Connects to h eadphones or other audio device.
20 Setting up the TV Stand . 1. Insert the bottom se ction of the stand into the base and insert the screw into the b ase ( A ). 2. Connect the to p sect ion of the stand to the bottom section ( B ). 3. Slide the TV supp ort strut into the stand as shown ( C ) until the button pops into th e slot ( D ).
21 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable.
22 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 port s on the back of the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player .
23 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are co lor-coded (black, red, white, yellow).
24 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the product.
25 Connecting the P ower Adapter 1. Connect the p ower cord to the power adapter as illustrated. 2. Plug the power adapter connector into the DC-IN on the rear panel of the TV . 3. Insert the thre e-pronged plug at the other en d of the power cord into a power outlet.
26 Using the R emote Control For best results, use the remote control within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 3 0 degrees when pointing at the signa l sensor . Refer to the following illustration.
27 T ur ning the TV On and Off 1. Press the POWE R button; the power indicator LED turns of f, indicating that the power has been turned on. 2. Press the POWE R button again; the power indicator LED shows red, indi - cating the TV is in st andby (off) mode.
28 Switching Source Signals Press the SOURCE button on the remote control or the SOURCE button on the control p anel to select the incoming source signal. The current source setting CH xx appears on the top lef t corner of the screen, A V1 or A V 2 appears on the bottom right corner of the screen.
29 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol panel.
30 Brightness 1. Press MENU to enter the OSD menus. 2. Press the CH UP or CH DOW N button to select Brightness. 3. Press MENU . The brightness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DOWN button to decrease the brightness.
31 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH DOWN or CH UP but - ton to sele ct Contrast. 3. Press MENU . The contrast slide bar is highlighted. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contrast.
32 Video Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN or CH UP button to select V ideo Set- ting. 2. Press MENU to enter the Video Settin g menu.
33 Hue 1. Press the CH DOWN or CH UP button to select Hue. 2. Press MENU to enter the Hue sub - menu. 3. Press the CH UP button to increase green and decrease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
34 Saturation 1. Press the CH DOWN or CH UP button to select Saturation. 2. Press MENU to enter the Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the saturation. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
35 Sharpness 1. Press the CH DOWN or CH UP button to select Sharpness. 2. Press MENU to enter the SHARP - NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpness. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
36 Color T emperature 1. Press the CH DOWN or CH U P but - ton to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. There are three default color temperatures to c hoo se from. St andard Co lor Press the CH DOWN or CH UP button t o select St anda rd, then press MENU .
37 Audio Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN or CH UP button to select Audio Setting. 2. Press MENU to enter the Audio Setting menu.
38 Tr e b l e 1. Press the CH DOWN or CH UP but - ton to select T reble. 2. Press MENU to enter the treble submenu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
39 Bass 1. Press the CH DOWN or CH UP but - ton to select Bass. 2. Press MENU to enter the Bass sub - menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
40 Balance 1. Press the CH DOWN or CH UP but t on to select Balance. 2. Press MENU to enter the Balance submenu. 3. Press the CH DOWN button to shift the balance to the lef t speaker . 4. Press the CH UP button to shift the balance to the right speaker .
41 Mute 1. Press the CH DOWN or CH U P but - ton to select Mute. 2. Press MENU to enter the Mute sub - menu. 3. Press the CH UP button to turn t he mute off. 4. Press the CH DOWN button to turn the mute on. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
42 Note The setting menu is available when current select source is TV . TV Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN or CH UP button to select TV Set - ting.
43 TV/CA TV 1. Press the CH DOWN or CH UP but - ton to sele ct TV/CA TV . 2. Press MENU to enter the TV/CA TV submenu. Receiving Cable TV Press the CH UP button to select CA TV , then press MENU . Receiving Broadcast TV Press the CH DOWN button to select TV , then press MENU .
44 MTS 1. Press the CH DOWN or CH UP but - ton to select MTS. 2. Press MENU to enter the MTS sub - menu. Select from the following options. MAIN Press the CH DOWN button or CH UP button to select MAIN. A green dot appears and MAIN is highlighted in yel - low .
45 Auto Program 1. Press the CH DOWN or CH UP but - ton to select Auto Program. 2. Press MENU to enter the Auto Pro - gram Setting submenu. 3. Press the CH DOWN or CH UP but - ton to select ON or OFF and press MENU . The screen shows “Auto Program..
46 Manual Program 1. Press the CH DOWN or CH UP but - ton to select “Manual Program”. 2. Press MENU to enter the Manual Pro - gram submenu. 3. Press the CH DOWN or CH UP but - ton to find the channel you want to add. Press MENU to sel ect the chan - nel.
47 Channel Add/Erase 1. Select the channe l you want to add or delete, for exampl e, Channel 28. 2. Press the CH DOWN or CH UP but - ton to sele ct CH. Add/Erase. 3. Press MENU to enter the Channel Add/Erase submenu. Select fro m the following options.
48 Favorite Ch annels 1. Press the CH UP button o r CH DOWN button to select Favorites CH. Edit. 2. Press MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favorite channels: M1, M2, M3, and M4. 4. Press the CH UP button o r CH DOWN button to select the channel number you want to set for M1.
49 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button t o select Mis- cellaneous Setting.
50 Language 1. Press the CH DOWN button o r CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T -Chinese (Tradition al Chinese). 4. Press the CH DOWN button o r CH UP button to select a language.
51 Sleep Timer The sleep timer turns the TV of f automatically after a set pe riod of time. 1. Press the CH DOWN button o r CH U P button to select Sleeper . 2. Press MENU to enter the Sleeper submenu. 3. The screen displays the available sleep timer setting: Of f, 30, 60, 90, and 120 minutes.
52 OSD Display This setting allows you to set th e amount of information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH D OWN button o r CH UP button to select OSD Display .
53 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOW N button o r CH UP button to select T ime Setting. 2. Press MENU to enter the Ti me Set- ting submenu. 3. The screen displays th e current set- ting. The hour is highlighted in yellow .
54 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function erases all of yo ur custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.
55 T urn the power off b efore you begin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning fluids.
56 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through con- nected video sources. • Press CH UP or CH DOWN to switch to other TV stations.
57 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly .
58 Item Specifications WT09-12A1 LCD Panel Size 12.1-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 246.
59 Aspect Ratio The ratio of width to height of a film, image or displ ay screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV .
60 S-V ideo Super-video, a video cabling standard used to transmit video by keep ing brightness (Y) and color informa tion (C) on separate channels. Most often used with camcorders, VCRs, and quality re ceiver s and amplifiers to provide sharper pic- tures.
デバイスHANNspree WT09-12A1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HANNspree WT09-12A1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHANNspree WT09-12A1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HANNspree WT09-12A1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HANNspree WT09-12A1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HANNspree WT09-12A1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHANNspree WT09-12A1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HANNspree WT09-12A1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHANNspree WT09-12A1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
