Hawking TechnologyメーカーH-DS20Lの使用説明書/サービス説明書
ページ先へ移動 of 30
H-DS20L USB 2.0 Docking Station.
FCC W arning This equipment has been tested and found to com ply with the regulati ons for a Class B digita l device, pursuant to Part 15 of the FCC Rul es. These li mits are desi gned to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Basic Overview……………………………………………………………………...…….4 Safety Instructions………………………………………………………………...4 Introduction……………………………………………………………………….
SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. Always read the safety instructions carefully . Keep this User ’ s Manual for future reference. Keep this equipment away from hum id environments. Lay this equipment on a reliable, flat surface before setting it up.
SYSTEM REQUIREMENTS PC or Mac MS W i ndows 98SE, ME, 2000, XP & Mac OS9.x & 10.1 A vailable USB Port 64 MB RAM or above Pentium 233 MHz or higher P ACKAGE CONTENTS Dock.
Type Docking Station With LAN Computer Port 1 upstream port Type B receptacle 2 USB 2.0 downstream ports, Type A receptacle 1 PS/2 Keyboard port Mini Din 6-pin 1 PS/2 Mouse port Mini Din 6-pin 1 File .
LED S tatus Indicators Once the USB Port Replicator is connected, the Hub Link LED is lit green and the LAN LED is lit after the Ethernet cable is connected. Ty p e # of LEDs Color Descriptions 1 Red The AC to DC power adapter is plugged into the power port 2 Green When any of the hub ports, which are connected to USB devices, are activated.
Figure 2. Upstream Port and Power Connector Connect to power adaptor Connect to PC ( I ) Connect the power adapter and plug it into the back of the docking station. Find an unused electrical outlet and plug it in the power adapter. Plug the flat end (A plug) of the USB cable into a free USB port on your PC.
1. Two-Port Hub Before you connect a USB device to one of the Hub ports, please follow the software installation instructions provided in the subsequent pages of this User ’ s Manual.
Installation for Windows 98SE & ME 1. The H-DS20L Install wizard searches for new drivers. Click Next to continue. 2. Select "Search for the best driver for your device [Recommended]," and click Next to continue.
3. Select "CD-ROM drive", and click Next to continue. 4. W indows will now search for the driver file for the device. Click Next to continue.
5. W indows has finished installing the software. Click Finish to end the W izard. * NOTE: Repeat the previous steps as needed. 6. If your operating system is Windows ME, click No to continue.
7. The "W elcome to the Install Shield W izard for PC-Linq" dialog window appears. Click Next to continue. 8. 9. Setup will add the program icon to the Program Folder listed below. Click Next to continue. Windows has finished installing the software.
10. The PC-Linq icon will appear on the desktop. Installation verification Because the docking station is USB 2.0, the hub driver is based on the host device.
15.
W i ndows ME 16.
17.
Installation for Windows 2000 1. The H-DS20L Install wizard helps you install a device driver. Click Next to continue. 2. Select "Search for a suitable driver for my device [recommended].
3. Select "Floppy disk drives" and click Next to continue. The wizard found a driver. Click Next to continue. 4. 19.
5. Select "C:WINNTsystem32drivers" for built-in hub driver (usbhub20.sys). Click Open to continue. 6. Click OK to continue. 20.
7. W indows has finished installing the software. Click Finish to continue. 8. This wizard helps you install a device driver . Click Next to continue. 21.
9. Select "Search for a suitable driver for my device [recommended]." Click Next to continue. 10. Select CD-ROM drives and click Next to continue.
11. The wizard found a driver . Click Next to continue. 12. W indows has finished installing the software. Click Finish to continue. * NOTE: Repeat the previous steps as needed.
13. The "Welcome to the Install Shield W izard for PC-linq" dialog window appears. Click Next to continue. 14. name, or se Setup will add the program icon to the Program Folder. You m ay type a new folder lect the default folder name. Click Next to continue.
Installation verification Because our docking station is USB 2.0, the hub driver is based on the host device. The device name may vary on your host device driver .
1. Installation for Windows XP The H-DS20L Install wizard helps you install a device driver. Select "Install the software automatically [Recomm ended].
3. The wizard has finished installing the software. Click Finish to continue. * NOTE: Repeat the previous steps as needed. 4. The "Welcome to the Install Shield Wizard for PC-linq" dialog window appears.
5. Setup will add the program icon to the Program Folder. You may type a new folder name, or select the default folder name. Click Next to continue. The PC-Linq icon will appear on the desktop. Note: If you connect the docking station to a PC via a USB 2.
Installation verification Because the docking station is USB 2.0, the hub driver is based on the host device. The device name may vary on your host device driver .
30.
デバイスHawking Technology H-DS20Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hawking Technology H-DS20Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHawking Technology H-DS20Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hawking Technology H-DS20Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hawking Technology H-DS20Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hawking Technology H-DS20Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHawking Technology H-DS20Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hawking Technology H-DS20Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHawking Technology H-DS20Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。