HighpointメーカーRocketRAID 2680の使用説明書/サービス説明書
ページ先へ移動 of 36
RocketRAID 2680 SAS/SA T AII Host Adapter User ’ s Guide Revision: 1.0 Date: August 2008 HighPoint T echnologies, Inc. 1.
Copyright Copyright © 2008 HighPoint T echnologies, Inc. This document contains materials protected by International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed in any form and for any purpose without the express written permission of HighPoint T echnologies, Inc.
T able of Contents Congratulations Specifications and Features .......................................................................................... 6 Operating System Support ......................................................................
Device Driver CD and HighPoint RAID Manage- ment 1 - Creating a Driver Diskette ...................................................................................... 2 0 2 - Device Driver Installation .................................................
HighPoint T echnologies, Inc. HighPoint T echnologies, long recognized as a leader in mass storage technologies specializes in the design and manufacturer of HBA (Host Bus Adapters) and HighPoint RAID IP (Intellectual Property).
Congratulations Congratulations Y ou have purchased one of the highest performing and most cost effective 8 channel SAS RAID controllers available.The RocketRAID 2680 offers the flexibility to support.
Congratulations • BIOS booting support • Online Array roaming • Automatic hard drive (insert / remove) detection • Automatic RAID rebuild • 64bit LBA support greater than 2TB per volume Arra.
Congratulations Operating System Support • W indows XP , 2003, V ista, 2008 (32 and 64-bit versions) • Linux (Fedora Core, Red Hat Enterprise / CentOS, SuSE, Debian, Ubuntu) • Mac OS X 10.
Hardware - Description and Installation 1 – RocketRAID 2680 Host Adapter layout RocketRAID 2680 Port1- Port2 - These represent the RocketRAID 2680’ s 2 Internal Mini-SAS ports. Each port can direct connnect up to 4 SA T A/SAS hard disks. BEEP1 – (alarm/speaker): the speaker emits and audible alarm in the case of disk/array failure.
Hardware – Description and Installation 2 – LED Connections LED connectors (Drive-activity/Drive-failure): LED support is discussed in greater detail in the LED Connection section.
Hardware – Description and Installation 3 – Hardware Installation Note: Make sure the system is powered-off before installing the RocketRAID host adapter.
3 . After installing the adapter, attach hard drives to the host adapter using the data cable. The RocketRAID 2680 model utilizes 2 Mini-SAS to Mini-SAS Cables are included in each retail box. This card can support up to 8 3Gb/s SAS or SA T A Hard Drives directly or upto 128 3Gb/s SAS or SA T A Hard Drives via SAS Expander .
RocketRAID BIOS Utility RocketRAID BIOS Utility The RocketRAID 2680 card will display it’ s BIOS screen during the system’ s boot process. Press Control + H when prompted, to access the BIOS settings Menu.
RocketRAID BIOS Utility BIOS Commands Create - this command is used to open the RAID Creation menu. Delete - this command will delete the selected RAID array. Add/Remove Spare - this command is used to assign hard disks to function as spare disks. The controller is capable of using spare disks to automatically rebuild broken or faulted RAID arrays.
RocketRAID BIOS Utility Highlight the tar get disks using the arrow keys, then select using Enter . A numeral will be displayed before each selected disk. Once all target disks have been selected, press ESC. The utility will display a warning, and ask you to press Y (yes) to initialize, or N (no) to cancel.
RocketRAID BIOS Utility 2 . Use the arrow keys to highlight the Array Name option and press Enter . The array name dialogue box will appear . Use the keyboard to input a new Array Name, and press the Enter key. Note: the Array Name command is optional – it is not necessary to name the array.
RocketRAID BIOS Utility 3 – Deleting Arrays Highlight the Delete command from the toolbar, and press Enter. The BIOS utility will display a list of available RAID arrays.
RocketRAID BIOS Utility The utility will display a warning message. Press Y (yes) to delete the array, or select N (no) to cancel. W arning: all data stored on the array will be lost – do not delete if the array contains critical data.
RocketRAID BIOS Utility 5 - Settings T o access the Settings menu, highlight the Settings command from the toolbar , and press Enter. Generally, single disks are designated to act as spares (disks that are not configured into RAID arrays). However, in some instances, disks that are members of RAID arrays may also be designated to act as a spare.
Device Driver CD and HighPoint RAID Management Device Drive CD and HighPoint RAID Man- agement Each retail box includes a copy of the HighPoint Products Software CD. This CD can be used to generate driver diskettes, and install the HighPoint RAID Management Utility Suite for a variety of operating systems.
Device Driver CD and HighPoint RAID Management 21 2 - Device Driver Installation W e recommend visiting the RocketRAID 2680 download page for the latest W indows Device Driver updates: http://highpoint-tech.com/USA/bios_rr2680.htm Drivers are posted in .
Device Driver CD and HighPoint RAID Management 22 Windows Driver Installation (Win2000, XP, Win 2003) Before installing the RocketRAID 2680 host adapter ’ s device driver , make sure the host adapter and all required hard disks have been installed into the system’ s chassis/ disk enclosure.
Device Driver CD and HighPoint RAID Management 23 Installation V erification After the driver has been installed, and the system has been restarted: 1 . Click the Start button, then right-click the “My Computer” icon. Select the Properties item from the pop up menu.
Device Driver CD and HighPoint RAID Management 24 Windows V ista/2008 Driver Installation Installing the driver during a fresh Windows Vista/2008 installation 1 . Boot from W indows V ista DVD. 2 . When the screen “ where do you want to install Windows ” appears, click “ Load driver ” and browse for the driver location.
Device Driver CD and HighPoint RAID Management 25 Installation V erification After the driver has been installed, and the system has been restarted: 1 . Click the Start button, then right-click My Computer icon. Select the Properties item from the popup menu.
Device Driver CD and HighPoint RAID Management 26 Several driver sets are also included with the RocketRAID 2680 Software CD. Each binary driver and source package includes an installation guide (.pdf format). Linux Driver sets: RR2680/Driver/Linux directory.
Device Driver CD and HighPoint RAID Management 27 Mac OS X Driver and W eb-based RAID Management Utility The driver and software package for the RocketRAID 2680 includes both the device driver for OS X, and a copy of the W eb RAID Management utility .
Device Driver CD and HighPoint RAID Management 28 Click “ Continue ” to proceed with installation Installing the driver and W eb-based RAID Management Interface Copy the Mac driver and software package from the RR2680 Software CD, to the Mac Desktop.
Device Driver CD and HighPoint RAID Management 29 Click “ Restart ” – after OS X reboots, the card will be recognized by the system. Y ou can configure arrays using the W eb RAID Management interface.
Device Driver CD and HighPoint RAID Management 30 3 - HighPoint RAID Management Utilities (HRM) The HighPoint RAID Management Utility Suite, also known as “HRM”, includes several user interface options. The latest version of the W eb Management utility user manual, is available from the following link: http://www.
Device Driver CD and HighPoint RAID Management 31 Red Hat Enterprise/CentOS, Fedora Core, Open SuSE – Installing the W eb-based Management utility Linux operating systems that support .rpm packages, allow you to double-click the HighPoint W eb RAID Management .
Device Driver CD and HighPoint RAID Management 32 Debian/Ubuntu Linux Distributions – Installing the W eb-based Management Utility For Debian/Ubuntu Linux distributions, you can use alien to convert the rpm pack- ages to a .deb package, then use “ dpkg -i ” command to install each package.
Customer Support Customer Support If you encounter any problems while utilizing the RocketRAID host adapter, or have any questions about this or any other HighPoint product, feel free to contact our Customer Support Department.
Customer Support 34 Contact Us HighPoint Corporate Headquarter USA Address 1161 Cadillac Ct. Milpitas, CA, 95035 W ebsite: http://www .highpoint-tech.com Phone: 1-408-942-5800 (9 am ~ 6 pm PST, M-F) Fax: 1-408-942-5801 E-mail: sales@highpoint-tech.com Support: support@highpoint-tech.
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Thank Y ou Thank you for purchasing the RocketRAID 2680 SA T AII/SAS RAID Host adapter . W e appreciate your support, and welcome any questions, comments or product suggestions you may have.
デバイスHighpoint RocketRAID 2680の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Highpoint RocketRAID 2680をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHighpoint RocketRAID 2680の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Highpoint RocketRAID 2680の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Highpoint RocketRAID 2680で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Highpoint RocketRAID 2680を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHighpoint RocketRAID 2680の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Highpoint RocketRAID 2680に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHighpoint RocketRAID 2680デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。