Hitachiメーカー53SWX12Bの使用説明書/サービス説明書
ページ先へ移動 of 76
PROJECTION COLOR TV 61SWX10B 53UWX10B 61SWX12B 61UWX10B 53SWX10B 43UWX10B 53SWX12B OPERA TING GUIDE IMPORT ANT SAFETY INSTRUCTIONS 2-4 FIRST TIME USE 5-22 THE GENIUS REMOTE CONTROL UL TRA TEC BIT -MAP.
2 IMPORT ANT Follow all warnings and instructions marked on this projection television. W ARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY TIPS 3 1. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other . A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety .
SAFETY TIPS 4 PICTURE CAUTIONS Picture Burn Prevention ¥ Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers.
ACCESSORIES 5 1. Remote Control Unit CLU-571 1TSI (Part No. HL01641), or Remote Control Unit CLU-5713TSI (Part No. HL01643). 2. T wo ÒAAÓ size, 1.5V batteries (For Remote Control Unit).
HOW T O SET UP YOUR NEW HIT ACHI PROJECTION TV 6 CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion.
HOOK-UP CABLES AND CONNECT ORS 7 Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
FRONT P ANEL CONTROLS 8 FRONT VIEW a MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote.
FRONT P ANEL CONTROLS 9 f POWER light Y ou will see a red light when the TV is turned on. g PERFECT PICTURE sensor The Perfect Picture sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture.
FRONT P ANEL JACKS AND CONNECTIONS 10 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks.
REAR P ANEL JACKS 11 a Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture.
REAR P ANEL JACKS 12 f Component: Y -P B P R Inputs Inputs 4 and 5 provide Y -P B P R jacks for connecting equipment with this capability , such as a DVD player or Set T op Box. Y ou may use standard video signal for INPUT :4 and 5. Items g ~ j are for 53/61SWX10B and 53/61SWX12B only .
P B P R AUDIO TO HI-FI P B P R MONITOR OUT INPUT 1 AUDIO (MONO) L R AUDIO L R S-VIDEO S-VIDEO VIDEO VIDEO AUDIO L R (MONO) S-VIDEO VIDEO Y/VIDEO R L AUDIO L R L R Y/VIDEO AUDIO INPUT 2 INPUT 4 INPUT 5 (MONO) (MONO) ANT A TO CONVERTER ANT B DVD Player Stereo System Amplifier Laserdisc player , VCR, camcorder , etc.
FIRST TIME USE 14 P B P R AUDIO TO HI-FI P B P R STOP CONNECT ONL Y 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) R L REAR SPEAKER DVD Player Stereo System Amplifier Laserdisc player , VCR, camcorder , etc.
15 TIPS ON REAR P ANEL CONNECTIONS S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
16 CONNECTING EXTERNAL AUDIO SOURCES P B P R AUDIO TO HI-FI P B P R MONITOR OUT INPUT 1 AUDIO (MONO) L R AUDIO L R S-VIDEO S-VIDEO VIDEO VIDEO AUDIO L R (MONO) S-VIDEO VIDEO Y/VIDEO R L AUDIO L R L R .
FIRST TIME USE 17 Match the numbers below to the diagrams for speaker placement and refer to the table on page 18 for the different surround sound requirements.
FIRST TIME USE 18 SURROUND REQUIRED OPTIONAL EFFECT FEA TURE CONNECTION CONNECTION OFF 1 3 5 Receive mono and stereo sound. ST ADIUM 1 2 4 3 5 Listener has feeling of being at a stadium. ROCK ARENA 1 2 4 3 5 Listener has feeling of being at a rock concert.
19 CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder , laserdisc player , DVD player , or HDTV Set T op Box to your TV set is dependent on the model and features of each component. Check the owner ’s manual of each component for the location of video and audio inputs and outputs.
20 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
21 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2 AND 3 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below . 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
22 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE T O VIDEO 4 OR 5: Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below .
23 THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HIT ACHI Projection TV , the new remote control is designed to operate different types of VCRs, CA TV (Cable TV) converters, set-top-box, satellite receiver , DVD players, and other audio/video equipment with one touch.
24 HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV 1 POWER button Press this button to turn the TV set on or of f when the remote is in TV mode. (See page 23 for instructions on how to set the remote control to TV mode.) b TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode.
25 HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV g A V1, A V2, A V3, or CD, T APE, AMP buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 34) i SLEEP button Press this button to display the sleep timer in the lower left corner of the screen.
26 HOW T O USE THE GENIUS REMOTE TO CONTROL YOUR TV r THUMB STICK/SELECT button All the On-Screen Display features can be set or adjusted by using the THUMB STICK. The THUMB STICK will highlight functions or adjust and set dif ferent features. Press the THUMB STICK toward desired direction and press down to SELECT.
27 PICTURE-IN-PICTURE (PIP) NOTES: 1. When using Y -P B P R input, only 480i signal can be viewed as a single mode PIP . 2. When ANT B is selected as the main channel, the SW AP feature is disabled. 3. Only sound from the main picture can be heard. 4.
PICTURE-IN-PICTURE CONT . SPLIT MODE PIP Split Mode PIP displays the main picture and sub-picture evenly on the screen. SURF MODE PIP This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen.
29 PICTURE-IN-PICTURE (PIP) d FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc.
30 USING THE REMOTE T O CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. Y ou must first program the remote to match the remote system of your VCR. (refer to page 35 for pre-codes) 1.
USING THE REMOTE T O CONTROL CABLE BOX FUNCTIONS 31 Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. Y ou must first program the remote to match the remote system of your cable box.
USING THE REMOTE T O CONTROL SET -T OP-BOX/SA TELLITE RECEIVER FUNCTIONS 32 Operating the precoded function for your set-top-box/satellite receiver . This remote is designed to operate different types of set-top-box/satellite systems. Y ou must first program the remote to match the remote system of your set-top-box/satellite systems.
33 USING THE REMOTE T O CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player . This remote is designed to operate different types of DVD players. Y ou must first program the remote to match the remote syste m of your DVD player . (refer to page 35 for pre-codes) 1.
34 USING THE REMOTE T O CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. Y ou must first program the remote to match the remote system of your Audio/Video component.
35 VCR, CABLE, SA TELLITE, DVD and AUDIO/VIDEO CODES VCR BRAND. . . . . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . . . . . 01 Aiko. . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Aiwa . . . . . . . . . . . . . .
UL TRA TEC OSD 36 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL 1. Press MENU on the remote control to display the different features on your HIT ACHI Projection TV . 2. Press the THUMB STICK to highlight a dif ferent feature. 3. Press EXIT on the remote control to quickly exit from a menu.
UL TRA TEC OSD 37 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL SETUP Set Menu Language Choose English, French, or Spanish text. Plug & Play Optimum hook up for your system. Set Antenna/Cable Select Antenna or Cable TV . Set Channel Memory First time set up for channel buttons.
SET UP 38 SETUP Select SETUP when setting your TV up for the first time. Use the THUMB STICK G or H on the remote to highlight the function desired. NOTE: T o see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds.
SET UP 39 SETUP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer three questions and a graphic will be displayed, showing you the optimum setup for your personalized system. Press THUMB STICK G or H to highlight the correct answers to all three questions.
SET UP 40 SETUP Select ANTENNA if you are using an indoor or outdoor antenna. Select CA TV if you have cable TV . Use THUMB STICK G or H to highlight the correct signal mode. Press down on THUMB STICK to select highlighted signal. Press EXIT to quit MENU or THUMB STICK F to return to previous menu.
SET UP 41 SETUP This feature will automatically store active TV channels in SET CHANNEL MEMORY . This will allow you to skip unused channels when using CHANNEL UP ( G ) or DOWN ( H ). If the EXIT button is pressed while SET CHANNEL MEMORY function is engaged, programming will stop.
SET UP 42 SETUP Use this function after SET CHANNEL MEMORY is completed to add or erase additional channels to the remote control CHANNEL G or H buttons. Add or erase additional channels while still in EDIT CHANNEL MEMORY using CHANNEL G or H or the number buttons to change the channel.
SET UP 43 SETUP This function allows you to review which channels are labeled in NAME THE CHANNEL, which have been added to EDIT CHANNEL MEMORY (SCAN), and which are protected by SET P ARENT AL LOCKS. Press THUMB STICK G or H to review more channels. Press EXIT to quit menu or THUMB STICK F to return to previous menu.
SET UP 44 SETUP The time must be set before you can SET PROGRAM TIMER or TV TIME OUT . Use THUMB STICK G or H to set the time, date, and year . Press THUMB STICK F or E to change position. Press EXIT to quit menu or THUMB STICK F to return to previous menu when the CURSOR is in the first position.
SET UP 45 SETUP Y our HIT ACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color . T o produce these colors, however , the beams must be precisely aligned over each other so that the colors can be mixed.
SET UP 46 SETUP SETUP The PICTURE FORMA TS function is very useful when setting up reception High Definition, Standard Definition and NTSC signals. PICTURE FORMA TS Picture Formats Ant A 6 Aspect Style Normal Full Fill Smooth Wide V .
SET UP 47 SETUP V . POSITION This function allows you to select when aspect style is either Full or Fill or Smooth Wide. V ertical position can be changed with this mode. For example, it will be useful for centering the picture when there is gray area at both top and bottom of the picture with HDTV signal.
CUST OMIZE 48 CUSTOMIZE CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CA TV signal source is selected.
CUST OMIZE 49 CUSTOMIZE Use this feature to give a name to any of the five video inputs. Press THUMB STICK H to highlight NAME THE INPUTS. Press THUMB STICK E to select preset NAME THE INPUTS. Press THUMB STICK G or H to scroll through the preset INPUT NAME LIST .
CUST OMIZE 50 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 36 channels can be stored in the F A VORITE CHANNELS function. Channel stored with CHANNEL MEMORY will automatically be stored in F A VORITE CHANNELS.
CUST OMIZE 51 CUSTOMIZE Use this function to display F A VORITE CHANNEL selections as sub-pictures or to tune the main picture to a desired favorite channel. Select a category using THUMB STICK F or E . Press MENU and the category will be displayed as sub-pictures at the right edge of the screen.
CUST OMIZE 52 CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter SET P ARENT AL LOCKS is a four digit secret code number .
CUST OMIZE 53 CUSTOMIZE This function will automatically turn the TV on and of f, one time only , every day , or once a week. Use THUMB STICK E to select PROGRAM 1, 2, 3, or 4. Use THUMB STICK G or H to select the time the TV will turn on and off. Use THUMB STICK E to change position.
CUST OMIZE 54 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. Use THUMB STICK G or H , then press down on THUMB STICK to change VIDEO INPUT SENSOR setting. When AUTO is selected, the TV will turn on and tune to VIDEO: 4 automatically , when the VIDEO: 4 input device is turned on.
CUST OMIZE 55 CUSTOMIZE DISPLA Y : ON/OFF will turn the display on or off. AUTO will turn the display on when Mute/Soft Mute is on. MODE: C.C. (Closed Caption) is for the program you are viewing. TEXT is for additional information such as news reports or a TV program guide.
VIDEO 56 VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality . Use this function to change the contrast between black and white levels in the picture. This adjustment will only affect the picture when ADV ANCED SETTINGS PERFECT PICTURE is OFF .
VIDEO 57 VIDEO Y our HIT ACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture settings to produce the highest quality picture possible. When PERFECT PICTURE is highlighted, press down on THUMB STICK to turn the PERFECT PICTURE on or off.
AUDIO 58 AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality . AUDIO Exit Exit 90% 50% Bass Treble Balance Reset Advanced Settings 50% 50% THUMB STICK THUMB STICK M.
AUDIO 59 AUDIO Use ADV ANCED SETTINGS to improve the sound performance of your TV , depending on listening conditions. MTS MODE Multi-Channel T elevision Sound will allow you to select STEREO (a stere.
AUDIO 60 AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality . Use THUMB STICK G or H to highlight the function to be adjusted. When EQUALIZER is highlighted, press THUMB STICK E to select the frequency you would like to adjust (60, 250, 1K, 3K or 10K).
AUDIO 61 AUDIO Use ADV ANCED SETTINGS to improve the sound performance of your TV , depending on listening conditions. MTS MODE Multi-Channel T elevision Sound will allow you to select STEREO (a stere.
THEA TER 62 THEA TER Use THUMB STICK G or H to change THEA TER MODES settings. When NEWS mode is chosen, the following are automatically set: CONTRAST - 75%, COLOR TEMPERA TURE - W ARM, LOUDNESS - ON, PERFECT VOLUME - ON.
THEA TER 63 THEA TER Surround The following surround settings will reproduce the ÒliveÓ sound you would hear in concert halls, sports stadiums, movie theaters, etc. with only two speakers. T o enter the SURROUND MODE, use THUMB STICK G or H to highlight then press down on THUMB STICK to select SURROUND MODE of your choice.
THEA TER 64 THEA TER Use THUMB STICK G or H to change THEA TER MODES settings. When NEWS mode is chosen, the following are automatically set: CONTRAST - 75%, COLOR TEMPERA TURE - W ARM, LOUDNESS - ON, PERFECT VOLUME - ON.
THEA TER 65 THEA TER SURROUND The following surround settings will reproduce the ÒliveÓ sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 17-18.
THEA TER 66 THEA TER DOLBY PRO LOGIC Dolby Pro Logic provides four separate sound channels: front left, center , front right, and surround. For properly encoded programs marked the center sound channel contains the dialogue for the program viewed. The left and right channels produce sound effects that will match the action on the TV screen.
THEA TER 67 THEA TER DOLBY DIGIT AL Dolby Digital provides six independent sound channels: front left, center , front right, surround left, surround right, and sub woofer .
THEA TER 68 THEA TER Use THUMB STICK G or H to select DIGIT AL or ANALOG. Press EXIT to quit menu or THUMB STICK F to return to previous menu. Set audio input to Digital or Analog. This fueature is used only when viewing VIDEO:4 or VIDEO:5 inputs, since only these inputs can accept DIGIT AL audio input.
THEA TER 69 THEA TER Use THUMB STICK G or H to select ST ANDARD, NIGHT , MAXIMUM. Press EXIT to quit menu or THUMB STICK F to return to previous menu. When ST ANDARD is selected: It is the normal listening mode. It does not make full use of your televisions dynamic range, but is a good compromise for all day viewing/listening.
THEA TER 70 THEA TER SPEAKER SETUP Select specific speaker output, including a subwoofer . Press THUMB STICK G or H to highlight feature. Press down on THUMB STICK to select INTERNAL or EXTERNAL W/AMP . Use THUMB STICK E to change SURROUND or SUB WOOFER feature to your desired setting.
71 CARE OF YOUR HIT ACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty .
72 RECEPTION PROBLEMS ¥ IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 73 HIT ACHI Projection T elevision incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR T O HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
USEFUL INFO 74 ¥ V elocity Modulation ¥ Closed Caption Decoder ¥ 2-T uner Picture in Picture (Single, Split and Surf-3) ¥ Magic Focus (Auto Digital Convergence) ¥ Dual Antenna Inputs ¥ Video Input Sensor ¥ 3 Dimensional Y/C Comb Filter ¥ Full 1080i HDTV capable when used with a Set-T op Box.
USEFUL INFO 75 Hitachi America, L TD. Home Electronics Division 1855 Dornoch Court San Diego, CA 92154 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
QR48041.
デバイスHitachi 53SWX12Bの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi 53SWX12Bをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi 53SWX12Bの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi 53SWX12Bの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi 53SWX12Bで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi 53SWX12Bを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi 53SWX12Bの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi 53SWX12Bに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi 53SWX12Bデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。