HitachiメーカーOPTIGEN AP 720STMの使用説明書/サービス説明書
ページ先へ移動 of 22
AP 720S TM LCD Panel Guide OPTIGEN® Semi-Automated Instrument.
1 Confidentiality Notice The materials and information contained here in are being provided by Hitachi Chemical Diagnostics to its customer solely for custom er ’ s use for its internal business purposes. Hitachi Chemical Diagnostics retains all rights, title, interest in and copyrights to the materials and inform ation herein.
2 ― T able of Contents ― Page 1 Operation Key…………………………………………………………... 3 2 Screen Display and Operation Method 2-1 Initialization……………………………………………………… 4 2-2 Main Menu……………………………………………………….
3 1 Operation Key Display: Liquid Crystal Panel Operation Key: Only the touch panel key in the shaded f i eld is executable. Press the Operation Key to execute the function. See Figure 1. Numerical V alue Input Key: Numerical value can be registered b y ‘ENT’ key .
4 2 Screen Display and Operation Method 2-1 Initialization [Screen Dis play] (Figure 3) (Figure 4) [Summary] Figure 3 will display approximately 5 sec onds after the power is turned on. Then the screen will change autom atically to the initialization sc reen, Figure 4.
5 2 Screen Display and Operation Method 2-2 Main Menu [Screen Dis play] (Figure 5) (Figure 6) [Summary] Figure 5 is the Main Menu screen after completion of Figure 4. Panel 36 is the default panel. Figure 6 is the Main Menu screen afte r selecting Panel 20 in Figure 7.
6 2 Screen Display and Operation Method 2-3 Panel T ype Selection [Screen Dis play] (Figure 7) [Summary] Select 36-allergen or 20-a ller gen panel in Figure 7.
7 2 Screen Display and Operation Method 2-4 Auto-Run (Process 1 to Pr ocess 7) [Screen Dis play] (Figure 8) (Figure 9) (Figure 10) (Figure 1 1) (Figure 12) (Figure 13) (Figure 14) (Continued on next p.
8 (Auto-Run, cont.) [Summary] Figure 8 is a confirmation screen. The Op erator needs to check that the W a sh Buffer Bottle and Antibody Reservoir are filled, and that the W aste Bottle is emptied prior to the Auto-Run.
9 2 Screen Display and Operation Method 2-5 Auto-Run (Photoreagent Setup and Pr ocess 8) [Screen Dis play] (Figure 15) (Figure 16) (Figure 17) [Summary] Figure 15 will alarm Operator that Photoreagen t is needed. The display shows the elapsed time from the start of auto-pause.
10 2 Screen Display and Operation Method 2-6 Auto-Run (Process End) [Screen Dis play] (Figure 18) [Summary] Figure 18 will alarm the Operator of the completion of Auto-Run. The display shows the elapsed time from the completi on of Auto-Run. “Alarm Of f” key will stop the alarm.
11 2 Screen Display and Operation Method 2-7 Maintenance [Screen Dis play] (Figure 19) (Figure 20) (Figure 21) (Figure 22) (Figure 23) (Figure 24) (Figure 25) (Figure 26) (Continued on next page).
12 (Maintenance, cont.) [Summary] Figure 19 provides the Prime, Rinse and Clock functions. [Operation Key] (Figure 19) Prime: T o Figure 20 Prime Operation screen Rinse: T o Figure 22 Ri nse Operation.
13 2 Screen Display and Operation Method 2-8 Pause [Screen Dis play] (Figure 27) (Figure 28) (Figure 29) (Figure 30) (Figure 31) (Figure 32) (Figure 33) (Figure 34) (Continued on next page).
14 (Pause, cont.) [Summary] Figure 27 to Figure 33 the alarm will indicate that th e current operation is pause d. The screen will display the [Run S tatus] in cluding the time elapsed from the start of the pause. A message “Information=” m a y be displayed in the screen, Figure 33.
15 (Examples of alarm messages, cont.) o Example) “Information =C2 L” “C2 L” indicates failure from the head pa rt of top/bottom carrier drive or sensor failure.
16 2 Screen Display and Operation Method 2-9 S tart/End Pr ocess and Position Setup [Screen Dis play] (Figure 35) [Summary] Figure 35 will appear when power interruption occurs during Auto-Run or the current process is cancelled/paused during Auto-Run.
17 2 Screen Display and Operation Method 2-10 Alarm [Summary] The alarm screen will appear when a problem occurs during the Auto-Run. The alarm will sound and can be stopped by pressing the “Alarm Of f” key . There are two kinds of alarm screens. The first ala rm screen is for con firmation.
18 Figur e 37 - Alarm Screen of Data Initializ ation (Confirmation) [Screen Dis play] (Figure 37) [Summary] Figure 37 shows data error has occurred af ter initialization. The Operator needs to press “Ok” so that the data for the instrument will be recovered and the def ault values will be implemented.
19 Figur e 39 - Alarm Screen of No Pettes [Screen Dis play] ( F i g u r e 3 9 ) [Summary] If the control software detect s that there is no pette at th e start of the run, Figure 39 will appear . If the run needs to be conti nued, setup pettes in the Pette Rack, and press ‘Retry’ key to continue.
20 Figur e 41 - Alarm Screen of Wr ong S tart Pette Setup [Screen Dis play] (Figure 41) [Summary] If the control software detects that the position of the start pette is wrong at the start of the run, Figure 41 will appear . If the run needs to be continued, setup the pettes correctly , press ‘Retry’ key to con tinue.
Auto-Run Pause Maintenance AP720S™ Panel Flowchart Interrupted run 21.
デバイスHitachi OPTIGEN AP 720STMの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hitachi OPTIGEN AP 720STMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi OPTIGEN AP 720STMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi OPTIGEN AP 720STMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi OPTIGEN AP 720STMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi OPTIGEN AP 720STMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi OPTIGEN AP 720STMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi OPTIGEN AP 720STMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi OPTIGEN AP 720STMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
