HitachiメーカーPJ-TX100の使用説明書/サービス説明書
ページ先へ移動 of 50
1 ENGLISH Projector PJ-TX100 User's Manual - Operating Guide Thank you for purchasing this projector . WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding.
2 About this manual . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . 2 Projector features . . . . . . . . . . 3 Prepar ations . . . . . . . . . . . . . . 3 About contents of package . . . . . . . 3 Fastening the lens cover . . . . . . .
3 ENGLISH Projector features / Prepar ations Projector Projector features features This projector is used to project various computer signals as well as NTSC/P AL/ SECAP video signals onto a screen. Little space is required for installation and large images can easily be realized.
4 Par t names Lens ( 34 ) radiates powerful light for projecting an image. Lens cover ( 3 ) V ertical lens shift dials ( 7 ) Horizontal lens shift dials ( 7 ) Filter cover ( 33 ) (An air fi lter is inside.) Elevator button ( 7 ) is on the both sides.
5 ENGLISH Par t names ST ANDBY/ON button ( 12 ) prepares for turning the power on/off. POWER indicator ( 12 ) tells the state of power supply . MENU button ( 17 ) operates the menu function. INPUT button ( 13 ) toggles between the signal ports.
6 Setting up Setting up Setting up Ar r angement WARNING ►Install the projector in a suitable environment according to instrictions of the "User's Manual - Safety Guide". CA UTION ►In installation, pay attention enough to ventilation.
7 ENGLISH Setting up Using the lens shift dials CA UTION ►Do not put your fi ngers around the projection lens to prevent them from being caught by the lens and lens ring. The Lens of this projector can be shifted horizontally and vertically . When you want to adjust the picture position, use the lens shift dials.
8 Setting up Connecting your de vices WARNING ►Incorrect connecting could result in fi re or electrical shock. Whenever attempting to connect other devices to the projector , please thoroughly read the "User's Manual - Safety Guide", this manual and the manual of each device to be connected.
9 ENGLISH Setting up DVI-D Y C B /P B C R /P R COMPONENT VIDEO S-VIDEO VIDEO COMPUTER CONTROL DVI-D Y C B /P B C R /P R COMPONENT VIDEO S-VIDEO VIDEO COMPUTER CONTROL DVI-D Y C B /P B C R /P R COMPONE.
10 Settin up Connecting pow er suppl y WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fi re and/or electrical shock. • Only use the power cord that came with the projector . If it is damaged, contact your dealer to newly get correct one.
11 ENGLISH Remote control Using the LIGHT button T o illuminate the buttons of the remote control, press the LIGHT button of it. 1. Press the LIGHT LIGHT button. If you don’t push the LIGHT button again, the lights will turn off in several seconds. Using the remote contr ol CA UTION ►Be careful in handling the remote control.
12 Po wer on/of f Power on/off Power on/off WARNING ► When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector . NO TE • T urn the power on/off in right order . Please power on the projector before the connected devices.
13 ENGLISH Operating Operating Operating Selecting an input signal 1. Using the projector's button, press the INPUT button. Each time you press the INPUT button, the projector switches between its input ports. Select the signal you wish to project.
14 Operating Adjusting the zoom and f ocus 1. Use the zoom knob to adjust the screen size. 2. Use the focus knob to focus the picture. Zoom knob Focus knob Using the automatic adjustment f eature 1. Press the AUTO button (remote control). The automatic adjustment operation requires approximately 10 seconds.
15 ENGLISH Operating Selecting a mode of picture type 1. Press the MODE button (remote control) to toggle between the modes for picture type. These arrangements are combinations of a mode of GAMMA ( 19 ) and a mode of COLOR TEMP ( 19 ) . Choose a suitable mode according to the projected source.
16 Operating R ecalling your adjustment This projector can memorize 4 settings by the MY MEMORY function of the PICTURE menu ( 20 ) . Pressing the MEMORY button (remote control) calls the settings and adjusts the current picture. The memory which is not registered is skipped.
17 ENGLISH Multifunctional settings Multifunctional settings Multifunctional settings Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT , SETUP , SCREEN, OPTION and EASY MENU. Each of these menus is operated using the same methods.
18 Multifunctional settings EASY Menu EASY Menu Item Description ASPECT Select the ASPECT menu to toggle the mode of image aspect ratio. Refer to description of “ASPECT” in the “IMAGE” menu. ( 22 ) KEYSTONE Perform the KEYST ONE adjustment using ◄/► buttons.
19 ENGLISH Multifunctional settings PICTURE Menu PICTURE Menu Item Description BRIGHT Adjust the brightness using the ▲/▼ buttons. : Light Dark CONTRAST Adjust the contrast using the ▲/▼ buttons. : Strong Wea k GAMMA Select a GAMMA mode using the ▲/▼ button.
20 Multifunctional settings Item Description SHARPNESS Adjust the sharpness using the ▲/▼ buttons. : Clear Soft PROGRESSIVE Select the Progressive Mode: TV FILM TURN OFF memo This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO input or a COMPONENT VIDEO input of 525i or 625i signal.
21 ENGLISH Multifunctional settings PICTURE Menu (continued) Adjustment steps of the CUSTOM GAMMA or the CUSTOM COLOR TEMP Press the ENTER button while the CUSTOM menu of “GAMMA” or “COLOR TEMP” is displayed. And the test pattern appears at the top of the screen as shown in the right.
22 Multifunctional settings IMAGE Menu IMAGE Menu Item Description ASPECT Select an Aspect Ratio using the ▲/▼ buttons: At a COMPUTER input: 4:3 16:9 NORMAL • The NORMAL keeps the original aspect ratio of the input signal. • At a COMPUTER input, selecting an aspect ratio may display the message“SYNC IS OUT OF RANGE”.
23 ENGLISH Multifunctional settings Item Description H SIZE Adjust the horizontal size using the ▲/▼ buttons. : Large Small memo This item can be selected only at a RGB signal. memo When this adjustment is excessive, the picture may not be displayed correctly .
24 Multifunctional settings INPUT Menu INPUT Menu Item Description COLOR SP ACE Select a color space mode using the ▲/▼ buttons. : AUTO RGB SMPTE240 REC709 REC601 Selecting the AUTO automatically selects the optimum mode. memo This item can not be selected only at a VIDEO or a S-VIDEO signal.
25 ENGLISH Multifunctional settings Item Description INFORMA TION Pressing the ► (or the ENTER) button displays the INPUT INFORMA TION menu. The INPUT INFORMA TION menu shows the information about the current signal input as illustrated below . memo The “FRAME LOCK” message means the frame lock function is working.
26 Multifunctional settings SETUP Menu SETUP Menu Item Description KEYSTONE Adjust the Keystone (V ertical) Distortion: Upper in the data Lower in the data memo The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
27 ENGLISH Multifunctional settings SCREEN Menu SCREEN Menu Item Description LANGUAGE Select a menu language using the ▲/▼ buttons. : ENGLISH FRANÇAIS DEUTSCH ESP AÑOL IT ALIANO .
28 Multifunctional settings Item Description MESSAGE Select the TURN ON or the TURN OFF using the ▲/▼ buttons. : TURN ON TURN OFF When the TURN ON is selected, the following message function works. The message of the “AUTO IN PROGRESS” for the auto adjustment.
29 ENGLISH Multifunctional settings OPTION Menu OPTION Menu Item Description AUTO OFF Set the time using the ▲/▼ buttons. : Long (max. 99 minutes) Short (min.
30 Multifunctional settings Item Description SERVICE Pressing the ► (or the ENTER) button calls the SERVICE menu. SERVICE Menu Select an item using the ▲/▼ buttons, and press the ► (or the ENTER) button to perform each function. : F ANSPEED F ACTORY RESET F ANSPEED Select the fan speed level using the ▲/▼ buttons.
31 ENGLISH Maintenance Maintenance Maintenance LAMP WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
32 Maintenance Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1. T urn off the projector , and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2. C ontact your dealer to prepare a new lamp.
33 ENGLISH Maintenance Air fi lter WARNING ►Before replacing the lamp, make sure the power switch is off and the power cord is not plugged in, then wait at least 45 minutes for the lamp to cool suffi ciently . ►Use only the air fi lter of the specifi ed type.
34 Maintenance WARNING ►Please carefully read the "User's Manual - Safety Guide". ►Before caring, make sure the power switch is off and the power cord is not plugged in. ►Be cautious of high temperature. Do not touch about the lens and ventilation openings during use or immediately after prevent a burn.
35 ENGLISH T r oubleshooting T roubleshooting T roubleshooting R elated messages When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below .
36 T r oubleshooting Related messages (continued) Message Description SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit. Please confi rm the specs for this unit or the signal source specs.
37 ENGLISH T r oubleshooting R e garding the indicator lamps Lighting and fl ashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the table below . Please respond in accordance with the instructions within the table.
38 T r oubleshooting Regarding the indicator lamps (continued) POWER indicator LAMP indicator TEMP indicator Description Blinking In Red or Lighting In Red T urned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the unit to cool down at least 20 minutes.
39 ENGLISH T r oubleshooting Phenomena that may easily be mistak en for machine def ects WARNING ►Never use the projector if abnormal operations such as smoke, strange odor , excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter , etc.
40 Phenomena that may easily be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page No pictures are displayed. The PC cannot detect the projector as a plug and play monitor . Make sure that the PC’s can detect a plug and play monitor using other plug and play monitor .
41 ENGLISH Warr anty And After-Ser vice W arranty and after-service W arranty and after-service If a problem occurs with the equipment, fi rst refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or the service company .
.
1 ENGLISH Projector PJ-TX100 PJ-TX100W/E/U Users Manual - Qui c k Guide Thank you for purchasing this projector . WARNING ►Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding.
2 Ar rangement / Adjusting the pr ojector's ele vator Arrangement Arrangement WARNING ►Install the projector in a suitable environment according to instrictions of the "User's Manual - Safety Guide". CA UTION ►This projector has some intake vents also on the bottom.
3 ENGLISH Connecting your de vices Connecting your devices Connecting your devices DVI-D Y C B /P B C R /P R COMPONENT VIDEO S-VIDEO VIDEO COMPUTER CONTROL DVI-D Y C B /P B C R /P R COMPONENT VIDEO S-.
4 Connecting the power supply / Putting batteries into the remote control Connecting the power supply Connecting the power supply WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fi re and/or electrical shock.
5 ENGLISH Operating Operating Operating WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector . T ur ning on the pow er 1. Set the power switch to the ON position. 2. Press the button ST ANDBY/ON (projector) or POWER (remote control).
6 Lamp Lamp Lamp WARNING HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out , if jolted or scratched, handled while hot, or worn over time.
7 ENGLISH Lamp (continued) Lamp replacement If the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible. 1. T urn off the projector , and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes.
8 Air fi lter Air fi lter Air fi lter WARNING ►Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool suffi ciently . ►Use only the air fi lter of the specifi ed type.
デバイスHitachi PJ-TX100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hitachi PJ-TX100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHitachi PJ-TX100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hitachi PJ-TX100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hitachi PJ-TX100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hitachi PJ-TX100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHitachi PJ-TX100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hitachi PJ-TX100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHitachi PJ-TX100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。