HooverメーカーWindTunnelTMの使用説明書/サービス説明書
ページ先へ移動 of 13
Self-Propelled W indTunnel ™ by HOOVER Congratulations on your purchase! This WindTunnel ™ vacuum cleaner takes HOOVER ® T ype “Y” Allergen Filtration filter bags This product was designed fo.
Fill in and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information.
3 1. Assembling cleaner Carton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle screws (in bag with owner’ s manual) B. Hose, cleaning tools and wands C. Handle D.
Place smaller diameter end of wand, into bottom of rack. Snap wand into clip at the top. Repeat with other wand. STEP II Attach hose 1-5 1-8 1-9 1-6 1-7 Align end of hose with projection (E) over slots (F) in dirt duct on back of handle. Slide hose into (F) and twist hose to lock it into place.
14. Brush roll control: slide control to “Carpet” for cleaning with brush r oll ON or to “Hard” for cleaning with brush roll OFF . 15.Carpet height control: slide knob to cor r ect setting for height of carpet being cleaned. 16.Headlight 17.‘Dirt FINDER’display* 18.
2 - 9 Brush roll control Note: When handle is in upright posi- tion, brush roll is automatically OFF. Move the brush roll control only when the handle is in the upright position. Slide control to “Carpet” to turn brush r oll ON for cleaning carpet or rugs.
7 indicator (some models only) When red is in the OFF window, brush r oll is STOPPED. When red is in the ON window brush roll is ROT A TING. Cleaning lightweight 2 - 1 0 2 - 1 1 2 - 1 2 2 - 1 3 flexible rugs St and on one end of rug and move cl eaner to ward other end or edg e.
3 - 1 8 2 - 1 9 Changing filter bag Disconnect cleaner from electrical outlet. H Where to buy Filter bags may be purchased from Authorized Hoover Dealers (Depot), Leading Retailers, from Hoover Factor y Service Centers, or through The Hoover Company on-line at www.
How to reattach filter door The filter door is designed with a “break-away“ feature which allows it to snap free if it is pushed open too far . T o reattach, align hinges (C) of cover with slots on sides of filter area. Press door back into place.
3 - 1 2 3 - 1 3 3 - 1 1 D C 3 - 9 3 - 1 0 Belt replacement The belts are located under the bottom plate of the cleaner and should be checked from time to time to be sur e they are in good condition. The flat (wide) belt is described below; the other is described under “Brush roll r eplacement”.
Installing brush roll Grasp brush roll and fit it into position by first sliding end, opposite the belt, into the rectangular slot (G) on side of clean - er . Push other side of brush roll (H) into place. Belt may fit loosely when proper - ly installed.
Possible Cause Possible Solution • Incorrect carpet height setting • Move carpet height control to a higher setting Problem: Cleaner won’t run P ro bl e m : Cleaner / tools won’t pick up Possi.
13 Full One Year W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner ’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase.
デバイスHoover WindTunnelTMの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hoover WindTunnelTMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHoover WindTunnelTMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hoover WindTunnelTMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hoover WindTunnelTMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hoover WindTunnelTMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHoover WindTunnelTMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hoover WindTunnelTMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHoover WindTunnelTMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。