HP (Hewlett-Packard)メーカー1.2の使用説明書/サービス説明書
ページ先へ移動 of 16
HP V ir tual C onnect Manager V er si on 1 .20 R elea se Not es and C ompatib ilit y Matr i x Part Number 467891-001 November 2007 (First Edition).
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to chan ge without no tice. The only warranties for HP products and services a re set forth in the express warranty statements accompanying such produc ts and services.
Contents 3 Con t en t s Hardware and firmwa re requir ements ............................................................................................. 4 HP Virtual Connect Manager firmware ..........................................................
Hardware and firmware requirements 4 H a rd w a re a n d fi rm wa re re q u i re m e n t s HP Virtual Connect Manager firmware The latest HP Virtual Connect Manager firmware package (version 1.20) contains the following firmwar e versions: • HP 1/10Gb VC-Enet version 1.
Hardware and firmware requirements 5 o HP NC326m PCI Express Dual Port Multifunct ion Gigabit Server Adapter o HP NC325m PCI Express Quad Port Gigabit Server Adapter o HP QLogic QMH2462 4Gb FC HBA for.
Hardware and firmware requirements 6 Product Recommended firmware ve rsion Minimum firmware version NC326i, NC325m, a nd NC326m Boot code version 3.28 and C Class option ROM 1.1.3* or later To use NC325m with the BL680c G 5 server blade, the option ROM must be updated to NC325m Boot code version 3.
Hardware and firmware requirements 7 Switch family Supported versions Unsupported switches McData and HP M-series Fibre Channel switches E/OS 9.03.00 E/OS 9.00.00 E/OS 8.02.00 • McDATA Intrepid 10000 Direc tor switch Cisco and HP C-series Fibre Channel switches SAN-OS 3.
New features 8 Ne w f eatur e s The VC-Enet version 1.20 firmware includes the fol lowing features: • HP BladeSystem c-Class c3000 Enclosur e support • HP ProLiant BL680c G5 Server Blade support .
New features 9 • Support for Multiple Users Multiple users are allowed within multiple VC Manager windows. • Support for longer passwords Password length has been extended to 39 characters. • Separate MAC and PXE assignments Previously, PXE support was associated with VC assigned MAC addres ses.
Important notes and recommendations 10 Important no tes and r ecommendati ons When a c-Class enclosure i s used with Virtual Connec t v1.20, the following conf iguration restrictions and guidelines apply: • Plan your interconnect module usage car efully before running the Virtua l Connect Domain Setup Wizard.
Important notes and recommendations 11 • Back up the Virtual Conne ct domain configurati o n eac h time changes are made. While saved in non-volatile memory and check-pointed to the neighboring module, HP recommends saving the configuration external to the encl osure.
Known issues 12 Kn own i s s u e s General • For configuration changes, the VC Manager can take up to 90 seconds for the new information to be saved to non-volatile storage. Configuration information might be lost if power is removed during this update time.
Known issues 13 • If an enclosure import is attempted with a server blade in a failed state, the Virtual Connect Manager might report an erroneous error. If the import comp letes, close the browser and log in again to verify the import was successful.
Known issues 14 • Virtual Connect Manager shows either a server blade or an interconnect module as degraded (but not both) for an I/O Ekey mismatch. • Network uplinks that are linked after the Networ k Setup Wizard has been started may not show proper link status in the wizard.
Known issues 15 • While executing individual (not automated) firmware updates, the Update button might appear after clicking the Activate bu tton for a VC-Enet module. o Ignore the Update button if it persists for more than 3 minutes. If the Update button appears for more than 3 minutes, then the firmware update failed and should be re-attempted.
Resolved issues 16 Re s o lve d i s s u e s The following issues that existed in Virtual Connect v1.16 have been re solved in Virtual Connect v1.20: • The Virtual Connect Manager now recovers fr om a dual-OA failover or the replacement of a single OA without requiring a reset of the Virtual Connect Manager.
デバイスHP (Hewlett-Packard) 1.2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 1.2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 1.2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 1.2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 1.2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 1.2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 1.2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 1.2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 1.2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
