HP (Hewlett-Packard)メーカー330, 350Cの使用説明書/サービス説明書
ページ先へ移動 of 184
This is the cyan on page 1 (seq: 1) This is the black on page 1 (seq: 1) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen C4699-90031 English HP DesignJet 330 and 350C .
330 350C ii Company confidential. Pelican User ’s Guide, Ed1, Final Freeze Status: frozen This is the cyan on page ii (seq: 2) This is the black on page ii (seq: 2) This User’ s Guide for the HP DesignJet 330 and 350C plotters contains the following types of information: setup use maintenance troubleshooting reference material.
iii Company confidential. Pelican User ’s Guide, Ed 1, Final Freeze Status: frozen This is the cyan on page iii (seq: 3) This is the black on page iii (seq: 3) Where to find the most commonly needed information T o find how to ... Go to ... Install the plotter .
iv Company confidential. Pelican User ’s Guide, Ed1, Final Freeze Status: frozen This is the cyan on page iv (seq: 4) This is the black on page iv (seq: 4).
v This is the cyan on page v (seq: 5) This is the black on page v (seq: 5) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen Finding information ii W elcome ix 1 Setting.
vi This is the cyan on page vi (seq: 6) This is the black on page vi (seq: 6) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen 3 Controlling your plot’ s appearance W.
vii This is the cyan on page vii (seq: 7) This is the black on page vii (seq: 7) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen 6 Reconfiguring your plotter T o see t.
viii This is the cyan on page viii (seq: 8) This is the black on page viii (seq: 8) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen Solving print-quality problems 9–.
This is the red on page ix (seq: 9) This is the yellow on page ix (seq: 9) This is the magenta on page ix (seq: 9) This is the green on page ix (seq: 9) This is the blue on page ix (seq: 9) ix This is the cyan on page ix (seq: 9) This is the black on page ix (seq: 9) Company confidential.
x This is the cyan on page x (seq: 10) This is the black on page x (seq: 10) Company confidential. Pelican User ’s Guide, ed1, Final. Freeze Status: frozen Accessories Roll-feed and legs assembly Ex.
350C xi This is the cyan on page xi (seq: 1 1) This is the black on page xi (seq: 1 1) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen Media 1 Y ou can plot on sheet media up to E/A0 size or D/A1 size, depending on the plotter model you have.
xii This is the cyan on page xii (seq: 12) This is the black on page xii (seq: 12) Company confidential. Pelican User ’s Guide, ed1, Final. Freeze Status: frozen Print quality Y ou can choose between three print quality options : Best Normal Fast In general, the better the print quality you choose, the slower the plotting routine.
xiii This is the cyan on page xiii (seq: 13) This is the black on page xiii (seq: 13) Company confidential. Pelican User ’s Guide, Ed1, Final. Freeze Status: frozen Software applications and drivers.
xiv This is the cyan on page xiv (seq: 14) This is the black on page xiv (seq: 14) Company confidential. Pelican User ’s Guide, ed1, Final. Freeze Status: frozen.
1–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–1 (seq: 15) This is the black on page 1–1 (seq: 15) Fast track 1-2 Setup checklis.
1–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–2 (seq: 16) This is the black on page 1–2 (seq: 16) Fast track If you meet all the following requirements: If you are happy with English as the language for the plotter ’ s internal plots.
1–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–3 (seq: 17) This is the black on page 1–3 (seq: 17) Setup checklist Having unpacked and assembled the plotter , you can use the checklist below as you complete each task explained in this chapter .
1–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–4 (seq: 18) This is the black on page 1–4 (seq: 18) T ask 1: Check that you have all the items r equired 1 Y ou will need the following items, which wer e supplied with the plotter .
1–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–5 (seq: 19) This is the black on page 1–5 (seq: 19) 3 Y ou will also need the following items, which wer e not supplied with the plotter .
1–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–6 (seq: 20) This is the black on page 1–6 (seq: 20) T ask 2: (Optional) Install a memory expansion module For details of the memory modules available, see page 10–16.
1–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–7 (seq: 21) This is the black on page 1–7 (seq: 21) Before handling a memory modu.
1–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–8 (seq: 22) This is the black on page 1–8 (seq: 22) T ask 3: Position the plotter If you have fitted the optional roll-feed kit, you must also fit the legs assembly for stability , so this task does not apply .
1–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–9 (seq: 23) This is the black on page 1–9 (seq: 23) T ask 4: Switch on Be sure that the power cord supplied with your plotter matches your ac power connection requir ements.
1–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–10 (seq: 24) This is the black on page 1–10 (seq: 24) T ask 5: Load the print cartridge(s) 1 Make sure that, on the front panel, the Film and Error lights are flashing.
This is the yellow on page 1–1 1 (seq: 25) This is the magenta on page 1–1 1 (seq: 25) 330 350C 1–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final.
This is the yellow on page 1–12 (seq: 26) This is the magenta on page 1–12 (seq: 26) 1–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–12 (seq: 26) This is the black on page 1–12 (seq: 26) 3 For each cartridge in the set: 1 T ake the cartridge out of its box.
1–13 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–13 (seq: 27) This is the black on page 1–13 (seq: 27) 4 When all the cartridges are installed, lower the cover . On the front panel, the Ready light should flash for up to about a minute and then go off.
1–14 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–14 (seq: 28) This is the black on page 1–14 (seq: 28) T ask 6: (Optional) Change.
1–15 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–15 (seq: 29) This is the black on page 1–15 (seq: 29) 2 Media T ype Make sure the front-panel Media T ype is set to Plain . If necessary , press the Media T ype key until the Plain light is on.
1–16 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–16 (seq: 30) This is the black on page 1–16 (seq: 30) 5 The plot is a Setup Sheet in English. Y ou can ignore all the information except the box in the top left, headed “1.
1–17 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–17 (seq: 31) This is the black on page 1–17 (seq: 31) T ask 7: Connect the plotter to your computer If you are connecting the plotter dir ectly to your computer 1 Decide whether to use the parallel or serial interface.
1–18 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–18 (seq: 32) This is the black on page 1–18 (seq: 32) If you are connecting the .
1–19 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–19 (seq: 33) This is the black on page 1–19 (seq: 33) T ask 8: (Optional) Configur e the plotter In the majority of cases, there is no need to change any of the plotter ’ s default settings.
1–20 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–20 (seq: 34) This is the black on page 1–20 (seq: 34) 2 Media T ype Make sure the front-panel Media T ype is set to Plain . If necessary , press the Media T ype key until the Plain light is on.
1–21 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–21 (seq: 35) This is the black on page 1–21 (seq: 35) 23 4567 8 0.13 0.70 0.35 0.50 0.25 0.18 1.00 HP–GL/2 HP–GL(7586B) 30 min 5 min 1 min 0.
1–22 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–22 (seq: 36) This is the black on page 1–22 (seq: 36) An example of a Setup Sheet is shown on the previous page. That example is for an E/A0-size plotter .
1–23 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–23 (seq: 37) This is the black on page 1–23 (seq: 37) 5 Follow the instructions on the Setup Sheet.
1–24 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–24 (seq: 38) This is the black on page 1–24 (seq: 38) T ask 9: Set up the plotte.
1–25 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–25 (seq: 39) This is the black on page 1–25 (seq: 39) When choosing from a device list, follow these preferences, which are listed here in priority sequence.
1–26 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1–26 (seq: 40) This is the black on page 1–26 (seq: 40) T ask 10: Send a sample or demo plot T o verify a successful configuration, choose a sample plot in your application and try to print it on the plotter .
2–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–1 (seq: 41) This is the black on page 2–1 (seq: 41) Caring for your media 2–2 C.
350C 2–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–2 (seq: 42) This is the black on page 2–2 (seq: 42) Caring for your media If.
2–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–3 (seq: 43) This is the black on page 2–3 (seq: 43) Supported media types and relative costs Media type selection on the front panel Supported HP media 1 Non–HP media also known as .
2–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–4 (seq: 44) This is the black on page 2–4 (seq: 44) Physical characteristics of m.
350C 2–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–5 (seq: 45) This is the black on page 2–5 (seq: 45) Recommended print-qualit.
2–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–6 (seq: 46) This is the black on page 2–6 (seq: 46) T ypical media-type choices b.
2–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–7 (seq: 47) This is the black on page 2–7 (seq: 47) Before loading media Roll/Sheet Specify whether you are going to load a sheet or a roll On the front panel, if the Roll light on, the plotter believes you are loading a roll.
2–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–8 (seq: 48) This is the black on page 2–8 (seq: 48) 2 Print Quality Specify the print quality setting Press the Print Quality key until the light comes on against the print quality setting you require.
2–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–9 (seq: 49) This is the black on page 2–9 (seq: 49) Loading sheet media T o load a sheet (without the r oll-feed option installed) T o learn how to load a sheet correctly first time, follow steps 1 through 7.
2–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–10 (seq: 50) This is the black on page 2–10 (seq: 50) 3 Which side down? As you load the sheet, it is the underside on which the plotter will print.
2–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–1 1 (seq: 51) This is the black on page 2–1 1 (seq: 51) 4 Hold the sheet by its edges, about 18 cm (7 in) from the top.
2–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–12 (seq: 52) This is the black on page 2–12 (seq: 52) 7 IMPOR T ANT . While keeping the right-hand side aligned with the line of holes, push the sheet in one swift and decisive movement up into the entry slot.
2–13 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–13 (seq: 53) This is the black on page 2–13 (seq: 53) 8 The plotter takes about a minute to check the alignment. While it’ s doing this, the Ready light on the front panel flashes.
This is the green on page 2–14 (seq: 54) 2–14 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–14 (seq: 54) This is the black on page .
This is the green on page 2–15 (seq: 55) 2–15 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–15 (seq: 55) This is the black on page .
2–16 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–16 (seq: 56) This is the black on page 2–16 (seq: 56) 5 The plotter checks the alignment again. While it’ s doing this, the Ready light on the front panel flashes.
2–17 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–17 (seq: 57) This is the black on page 2–17 (seq: 57) Loading roll media T o change the r oll Y ou can order spare spindles as accessories – see page 10–17.
This is the green on page 2–18 (seq: 58) 2–18 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–18 (seq: 58) This is the black on page 2–18 (seq: 58) 2 If the old r oll is not used up , then remove the media from the media path, as explained here.
2–19 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–19 (seq: 59) This is the black on page 2–19 (seq: 59) 3 Remove the old roll by pulling firmly first on the left end of the spindle and then on the right.
2–20 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–20 (seq: 60) This is the black on page 2–20 (seq: 60) 5 Remove the new roll from its wrapping, Place it on the spindle, so that, as the media winds up from behind the roll, the media stop still on the spindle is on the right.
This is the yellow on page 2–21 (seq: 61) 2–21 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–21 (seq: 61) This is the black on page.
2–22 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–22 (seq: 62) This is the black on page 2–22 (seq: 62) 4 Make sure the entire leading edge of the roll – left and right – is placed inside the entry slot.
This is the green on page 2–23 (seq: 63) 2–23 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–23 (seq: 63) This is the black on page 2–23 (seq: 63) 6 Realigning the media is an essential , not optional, part of the r oll-loading pr ocedur e.
2–24 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–24 (seq: 64) This is the black on page 2–24 (seq: 64) 8 Align the edges of the media coming out of the plotter with the same edges going into the plotter , by pulling them taut with both hands and aligning them by eye.
This is the green on page 2–25 (seq: 65) 2–25 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–25 (seq: 65) This is the black on page 2–25 (seq: 65) 10 While the cover is open, the plotter will pause, waiting for you to trim the front edge of the roll.
2–26 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–26 (seq: 66) This is the black on page 2–26 (seq: 66) T o load a sheet with the .
2–27 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–27 (seq: 67) This is the black on page 2–27 (seq: 67) Unloading media Drying time On some media types, the ink needs to dry before the plot is unloaded.
2–28 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–28 (seq: 68) This is the black on page 2–28 (seq: 68) T o unload a sheet at the end of a plot 1 When the Load Media light comes on (not flashing), the plot is finished.
2–29 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–29 (seq: 69) This is the black on page 2–29 (seq: 69) T o cut and unload a plot fr om a roll If the roll-feed option is installed, your plotter includes a built-in cutter .
This is the green on page 2–30 (seq: 70) 2–30 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–30 (seq: 70) This is the black on page 2–30 (seq: 70) T o cut and unload a plot from a roll in Pause mode This mode is the default, and is indicated by the Roll light not flashing.
2–31 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–31 (seq: 71) This is the black on page 2–31 (seq: 71) 2 Press Continue Plotting to confirm that you’ve cut it. The Ready light comes on to confirm that the plotter is ready for the next plot.
This is the green on page 2–32 (seq: 72) 2–32 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2–32 (seq: 72) This is the black on page .
3–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–1 (seq: 73) This is the black on page 3–1 (seq: 73) W ays to control the plot’ .
3–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–2 (seq: 74) This is the black on page 3–2 (seq: 74) W ays to contr ol the plot’ s appearance Note. Throughout this chapter there are references to “pens”.
3–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–3 (seq: 75) This is the black on page 3–3 (seq: 75) Page size The Page size option applies only when using roll media, and is used to define the way in which the plotter emulates a sheet of media when printing your plot.
3–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–4 (seq: 76) This is the black on page 3–4 (seq: 76) When do you need to adjust the page size in the plotter? Normally you don’t need to.
3–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–5 (seq: 77) This is the black on page 3–5 (seq: 77) T o adjust the page size in the Setup Sheet Size in Setup Sheet Comments Inked area The plotted page size is the inked area plus margins.
3–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–6 (seq: 78) This is the black on page 3–6 (seq: 78) Page size and clipped plots W.
3–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–7 (seq: 79) This is the black on page 3–7 (seq: 79) Rotating a plot Can you rotate any drawing using the Setup Sheet? No. The Rotate option available in the Setup Sheet is applicable only if: the file contains no raster data.
3–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–8 (seq: 80) This is the black on page 3–8 (seq: 80) Exactly what is rotated? W ith roll media , both the drawing and the page orientation are rotated.
3–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–9 (seq: 81) This is the black on page 3–9 (seq: 81) The Rotate feature and clippe.
3–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–10 (seq: 82) This is the black on page 3–10 (seq: 82) Plotting a mirror image Y ou can plot a mirror image of a drawing, using the Setup Sheet, without changing the drawing in your software, The available options are: Mirror off .
350C 330 3–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–1 1 (seq: 83) This is the black on page 3–1 1 (seq: 83) Changing the t.
330 3–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–12 (seq: 84) This is the black on page 3–12 (seq: 84) Changing the plotter.
330 350C 3–13 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–13 (seq: 85) This is the black on page 3–13 (seq: 85) Printing color drawings in monochrome Y ou can successfully print color drawings in monochrome with either the HP DesignJet 330 or the HP DesignJet 350C.
350C 330 3–14 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–14 (seq: 86) This is the black on page 3–14 (seq: 86) Important points about monochrome printing The monochrome plot will render colors as grayscales .
330 Note that glossy media types are not supported on the HP DesignJet 330. 3–15 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–15 (se.
3–16 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 3–16 (seq: 88) This is the black on page 3–16 (seq: 88) T o change the print quality on the fr ont panel Print Quality For details of each print quality level, see the table on the previous page.
4–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 4–1 (seq: 89) This is the black on page 4–1 (seq: 89) T o cancel a plot 4-2 T o cop.
4–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 4–2 (seq: 90) This is the black on page 4–2 (seq: 90) T o cancel a plot T o cancel the current plot while it is being received, or while it is printing, press Cancel .
4–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 4–3 (seq: 91) This is the black on page 4–3 (seq: 91) T o advance the media Pressing the Form Feed key advances the media out of the media exit slot.
4–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 4–4 (seq: 92) This is the black on page 4–4 (seq: 92).
5–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–1 (seq: 93) This is the black on page 5–1 (seq: 93) Their purpose and how to prin.
350C 5–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–2 (seq: 94) This is the black on page 5–2 (seq: 94) Their purpose and how to print them V arious pre-defined plots are supplied with your plotter .
5–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–3 (seq: 95) This is the black on page 5–3 (seq: 95) Using the Black Cartridge Ali.
5–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–4 (seq: 96) This is the black on page 5–4 (seq: 96) 2 When you have correctly loaded the sheet (when the Ready light is on and steady), press the Setup and Replot keys simultaneously .
5–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–5 (seq: 97) This is the black on page 5–5 (seq: 97) 1 2 3 In each of the two large boxes, mark the best set of lines by filling in the oval.
5–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–6 (seq: 98) This is the black on page 5–6 (seq: 98) Three important points concerning the Black Cartridge Alignment Procedure: Always use the Black Cartridge Alignment Sheet immediately after printing it.
This is the yellow on page 5–7 (seq: 99) This is the magenta on page 5–7 (seq: 99) 5–7 Company confidential. Pelican User ’s Guide, Ed 1, Final.
This is the magenta on page 5–8 (seq: 100) 5–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–8 (seq: 100) This is the black on page.
This is the yellow on page 5–9 (seq: 101) This is the magenta on page 5–9 (seq: 101) Red Green 5–9 5–9 5–9 Company confidential. Pelican User ’s Guide, Ed 1, Final.
5–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 5–10 (seq: 102) This is the black on page 5–10 (seq: 102) The part headed T o chec.
6–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–1 (seq: 103) This is the black on page 6–1 (seq: 103) T o see the current configu.
6–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–2 (seq: 104) This is the black on page 6–2 (seq: 104) T o see the current configuration of the plotter T o see the current configuration of your plotter , print the Setup Sheet, as explained from page 1–19.
6–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–3 (seq: 105) This is the black on page 6–3 (seq: 105) T o change the serial interface settings Parallel W ith a parallel interface, no front-panel configuration is necessary .
6–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–4 (seq: 106) This is the black on page 6–4 (seq: 106) T o change the I/O timeout setting Some software may not write a proper file terminator at the end of the file.
330 6–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–5 (seq: 107) This is the black on page 6–5 (seq: 107) T o upgrade your plotte.
6–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–6 (seq: 108) This is the black on page 6–6 (seq: 108) 1 Make sure that the plotter is switched OFF and that neither the power cord nor an interface cable is connected.
6–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–7 (seq: 109) This is the black on page 6–7 (seq: 109) Before handling a memory mo.
6–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–8 (seq: 1 10) This is the black on page 6–8 (seq: 1 10) 4 T emporarily place the module on a conductive pad, for example the one containing the new SIMM.
6–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–9 (seq: 1 1 1) This is the black on page 6–9 (seq: 1 1 1) 9 1 W ith the plotter still switched OFF , raise the cover to access the cartridge carriage on the left.
This is the yellow on page 6–10 (seq: 1 12) This is the magenta on page 6–10 (seq: 1 12) 6–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–10 (seq: 1 12) This is the black on page 6–10 (seq: 1 12) 11 Remove the cover from the three left-hand cartridge selectors.
6–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–1 1 (seq: 1 13) This is the black on page 6–1 1 (seq: 1 13) 13 From the upgrade kit, take the new overlay for the front panel. 1 Peel the adhesive layer from the back.
6–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 6–12 (seq: 1 14) This is the black on page 6–12 (seq: 1 14).
7–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–1 (seq: 1 15) This is the black on page 7–1 (seq: 1 15) Replacing cartridges 7-2 .
This is the green on page 7–2 (seq: 1 16) 7–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–2 (seq: 1 16) This is the black on page.
7–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–3 (seq: 1 17) This is the black on page 7–3 (seq: 1 17) Using genuine HP supplies T o ensure best performance, Hewlett-Packard Company recommends using only genuine HP supplies in HP inkjet printers and plotters.
350C 7–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–4 (seq: 1 18) This is the black on page 7–4 (seq: 1 18) Before r eplacing ca.
This is the yellow on page 7–5 (seq: 1 19) This is the magenta on page 7–5 (seq: 1 19) 7–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–5 (seq: 1 19) This is the black on page 7–5 (seq: 1 19) T o replace one or mor e cartridges 1 Access the cartridge carriage.
This is the yellow on page 7–6 (seq: 120) This is the magenta on page 7–6 (seq: 120) 7–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–6 (seq: 120) This is the black on page 7–6 (seq: 120) 3 1 T ake the new cartridge out of its box.
This is the green on page 7–7 (seq: 121) 7–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–7 (seq: 121) This is the black on page 7.
This is the yellow on page 7–8 (seq: 122) This is the magenta on page 7–8 (seq: 122) Green 7–8 (seq: 122) 350C 350C 7–8 Company confidential. Pelican User ’s Guide, Ed 1, Final.
7–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–9 (seq: 123) This is the black on page 7–9 (seq: 123) Cleaning the plotter Clean only the outside of the plotter .
7–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 7–10 (seq: 124) This is the black on page 7–10 (seq: 124).
8–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–1 (seq: 125) This is the black on page 8–1 (seq: 125) FRONT -P ANEL 8 LIGHTS Fron.
This is the green on page 8–2 (seq: 126) 8–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–2 (seq: 126) This is the black on page 8–2 (seq: 126) Front-panel lights The lights on the front panel provide the means for your day-to-day “communication” with the plotter .
This is the green on page 8–3 (seq: 127) 8–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–3 (seq: 127) This is the black on page 8–3 (seq: 127) Pattern of lights Explanation and Action The current plot is too large for the plotter ’s memory .
This is the green on page 8–4 (seq: 128) 8–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–4 (seq: 128) This is the black on page 8–4 (seq: 128) Pattern of lights Explanation and Action The plotter is ready , but you need to load media.
This is the green on page 8–5 (seq: 129) 8–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–5 (seq: 129) This is the black on page 8–5 (seq: 129) Pattern of lights Explanation and Action The current Print Quality selection is Best.
This is the green on page 8–6 (seq: 130) 8–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 8–6 (seq: 130) This is the black on page 8–6 (seq: 130) Pattern of lights Explanation and Action The plotter is ready to plot.
9–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–1 (seq: 131) This is the black on page 9–1 (seq: 131) Using the documentation 9-2.
9–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–2 (seq: 132) This is the black on page 9–2 (seq: 132) Using the documentation For the meanings of the lights on the front panel, see chapter 8.
This is the magenta on page 9–3 (seq: 133) 9–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–3 (seq: 133) This is the black on page 9–3 (seq: 133) Locating the source of your pr oblem 1 Check the status of the front-panel lights.
9–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–4 (seq: 134) This is the black on page 9–4 (seq: 134) Solving media-handling problems If the plotter will not accept your media Is the power on? No lights on the front panel = no power .
This is the magenta on page 9–5 (seq: 135) 9–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–5 (seq: 135) This is the black on page 9–5 (seq: 135) Clearing a media jam 1 Switch OFF the plotter and open the cover .
This is the green on page 9–6 (seq: 136) 9–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–6 (seq: 136) This is the black on page 9–6 (seq: 136) 2 Push the cartridge carriage all the way to the left, touching only the solid plastic parts of the carriage.
This is the green on page 9–7 (seq: 137) This is the magenta on page 9–7 (seq: 137) 9–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–7 (seq: 137) This is the black on page 9–7 (seq: 137) 4 Carefully remove any torn pieces from inside the plotter .
9–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–8 (seq: 138) This is the black on page 9–8 (seq: 138) Solving communication probl.
This is the magenta on page 9–9 (seq: 139) 9–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–9 (seq: 139) This is the black on page.
9–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–10 (seq: 140) This is the black on page 9–10 (seq: 140) If the plot is clipped This indicates a discrepancy between the actual plotting area on the loaded media and the plotting area as understood by your software.
This is the magenta on page 9–1 1 (seq: 141) 9–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–1 1 (seq: 141) This is the black o.
This is the magenta on page 9–12 (seq: 142) 9–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–12 (seq: 142) This is the black on p.
This is the yellow on page 9–13 (seq: 143) This is the magenta on page 9–13 (seq: 143) Green Blue Red 9–13 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–13 (seq: 143) This is the black on page 9–13 (seq: 143) 3 One or more of your cartridges may be out of ink.
This is the magenta on page 9–14 (seq: 144) 350C 350C 9–14 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–14 (seq: 144) This is the .
This is the magenta on page 9–15 (seq: 145) 350C 9–15 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–15 (seq: 145) This is the black on page 9–15 (seq: 145) If there ar e blurred lines (ink “bleeds” from lines) T ry a higher Print Quality level.
9–16 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–16 (seq: 146) This is the black on page 9–16 (seq: 146) If ink smears after you remove a plot Be sure the ink is dry before you remove the sheet.
This is the magenta on page 9–17 (seq: 147) 9–17 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–17 (seq: 147) This is the black on page 9–17 (seq: 147) Solving miscellaneous problems If the plotter does not plot Y ou may have a power problem.
9–18 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–18 (seq: 148) This is the black on page 9–18 (seq: 148) Getting help Hewlett-Packard has support services available to help you in case you have a problem with your plotter .
This is the magenta on page 9–19 (seq: 149) 9–19 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–19 (seq: 149) This is the black on p.
9–20 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 9–20 (seq: 150) This is the black on page 9–20 (seq: 150).
10–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–1 (seq: 151) This is the black on page 10–1 (seq: 151) Plotter specifications 1.
10–2 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–2 (seq: 152) This is the black on page 10–2 (seq: 152) Plotter specifications H.
10–3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–3 (seq: 153) This is the black on page 10–3 (seq: 153) Functional specifications (continued) Supported media sizes Width (carriage axis) Length (paper axis) me di a s i zes Minimum Maximum Minimum Maximum 210 mm (8.
10–4 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–4 (seq: 154) This is the black on page 10–4 (seq: 154) Physical specifications (Unpacked) Weight Length Depth Height Without roll-feed and legs option E/A0-size plotter D/A1-size plotter 31 kg (68.
10–5 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–5 (seq: 155) This is the black on page 10–5 (seq: 155) Environmental specificat.
10–6 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–6 (seq: 156) This is the black on page 10–6 (seq: 156) EMC specifications (electromagnetic compatibility) Canada Canadian Department of Communications, Radio Interference Regulations Class B compliant.
10–7 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–7 (seq: 157) This is the black on page 10–7 (seq: 157) Plotting area (= media size minus margins).
10–8 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–8 (seq: 158) This is the black on page 10–8 (seq: 158) Interface specifications Below are the parallel and serial interface specifications.
10–9 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–9 (seq: 159) This is the black on page 10–9 (seq: 159) Parallel (Bi-T ronics/Ce.
10–10 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–10 (seq: 160) This is the black on page 10–10 (seq: 160) Serial (RS-232-C) Cab.
10–1 1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–1 1 (seq: 161) This is the black on page 10–1 1 (seq: 161) Interface cables P.
10–12 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–12 (seq: 162) This is the black on page 10–12 (seq: 162) Regulatory notices T .
10–13 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–13 (seq: 163) This is the black on page 10–13 (seq: 163) Le présent appareil .
10–14 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–14 (seq: 164) This is the black on page 10–14 (seq: 164) DECLARA TION OF CONFORMITY according to ISO/IEC Guide 22 and EN 45014 Manufacturer ’ s Name: Hewlett-Packard Española S.
10–15 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–15 (seq: 165) This is the black on page 10–15 (seq: 165) Ordering accessories .
10–16 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–16 (seq: 166) This is the black on page 10–16 (seq: 166) HP Part Number The HP.
10–17 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–17 (seq: 167) This is the black on page 10–17 (seq: 167) HP Part Number Networ.
10–18 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–18 (seq: 168) This is the black on page 10–18 (seq: 168) HP part numbers for H.
10–19 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–19 (seq: 169) This is the black on page 10–19 (seq: 169) HP-GL/2 and HP R TL p.
10–20 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 10–20 (seq: 170) This is the black on page 10–20 (seq: 170).
1 1–1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1 1–1 (seq: 171) This is the black on page 1 1–1 (seq: 171) GLOSSARY 11 Glossary .
1 1–2 Company confidential. Pelican User ’s Guide. Ed 1. Draft 2. Freeze Status: not frozen This is the cyan on page 1 1–2 (seq: 172) This is the black on page 1 1–2 (seq: 172) ANSI size An American standard paper size; e.g. D, E, etc. application The software you use to create your drawings.
1 1–3 Company confidential. Pelican User ’s Guide. Ed 1. Draft 2. Freeze Status: not frozen This is the cyan on page 1 1–3 (seq: 173) This is the black on page 1 1–3 (seq: 173) inked area The smallest rectangle that contains all the content of the drawing, while maintaining its relative dimensions.
1 1–4 Company confidential. Pelican User ’s Guide. Ed 1. Draft 2. Freeze Status: not frozen This is the cyan on page 1 1–4 (seq: 174) This is the black on page 1 1–4 (seq: 174) spindle The rod that holds the roll of media in the roll-feed and legs option.
I-1 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page I-1 (seq: 175) This is the black on page I-1 (seq: 175) A accessories, 1-4–1-6 list, 10.
I-2 Company confidential. Pelican User ’s Guide, Ed 1, Final Freeze Status: frozen This is the cyan on page I-2 (seq: 176) This is the black on page I-2 (seq: 176) G gaps in lines, 9-12 glossary of .
I-3 Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page I-3 (seq: 177) This is the black on page I-3 (seq: 177) memory , 6-2, 10-16 and file size.
I-4 Company confidential. Pelican User ’s Guide, Ed 1, Final Freeze Status: frozen This is the cyan on page I-4 (seq: 178) This is the black on page I-4 (seq: 178) S safety , MSDS, 10-12 safety specifications, 10-6 self test. See color cartridge test procedure serial.
Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 1 (seq: 179) This is the black on page 1 (seq: 179) Printed Documentation for Users of the HP.
Company confidential. Pelican User ’s Guide, Ed 1, Final. Freeze Status: frozen This is the cyan on page 2 (seq: 180) This is the black on page 2 (seq: 180).
Please give us your feedback on the quality of this documentation Cir cle the appropriate scor e Overall ease of use of this manual Overall ease of use of the Quick Reference Guide Use of language in .
HP DesignJet Marketing Center Hewlett-Packard Company Building #7 16399 West Bernardo Drive San Diego, CA 92127 U.S.A. BUSINESS REPL Y MAIL FIRST CLASS MAIL PERMIT NO.
Please give us your feedback on the quality of this documentation Cir cle the appropriate scor e Overall ease of use of this manual Overall ease of use of the Quick Reference Guide Use of language in .
Hewlett-Packard Company Barcelona Division Attn: Learning Products Dept. Avda. Graells, 501 08190 Sant Cugat del V allès Spain R B Fold here and then staple or tape the ends together B AAA Any comments? Company confidential. Pelican User ’s Guide, Ed 1, Final.
デバイスHP (Hewlett-Packard) 330, 350Cの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 330, 350Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 330, 350Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 330, 350Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 330, 350Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 330, 350Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 330, 350Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 330, 350Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 330, 350Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
