HP (Hewlett-Packard)メーカー5900 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 102
HP Deskjet 5900 series User's guide.
Hewlett-Packard Company notices The information contained in this document is subject to change without notice. All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of Hewlett- Packard, except as allowed under copyright laws.
Contents 1 Welcome ....................... ........................................ .............................. ...................4 2 Special features ................. ............... ................... ................ .................... ....
Fast/economical printing................... ................................ ........................... .........46 General everyday printing..................................................................................... 47 Presentation printing.
12 Supplies ............................................................... ................................................92 Paper........................ ....................... ....................... .......................... ...................
1 Welcome To find an answer to a question, select one of the following topics: ● Special features ● Get started ● Connect to the printer ● Print photos ● Print photos from a digital camera .
2 Special features Congratulations! You have purchased an HP Deskjet printer that is equipped with several exciting features: ● Borderless printing : Use the entire page surface when printing photos and brochures with the borderless printing feature.
3 Get started ● Printer features ● Buttons and lights ● Paper trays ● Print cartridges ● Ink-backup mode ● Automatic paper-type sensor Printer features The printer has several features to make printing easier and more efficient.
1 Automatic paper-type sensor 2 Print cartridges 3 Ink-backup mode 1 USB port Buttons and lights Use the printer buttons to turn the printer on and off, cancel a print job, and restart a job. The printer lights give you visual cues about the status of the printer.
1 Power button and light 2 Print Cartridge Status lights 3 PictBridge lights 4 Resume button and light 5 Print Cancel button Power button and light Use the Power button to turn the printer on and off. It can take a few seconds for the printer to turn on after you press the Power button.
1 Print Cartridge Status lights 1. The left status light represents the tri-color print cartridge, which is installed in the left side of the print cartridge cradle. – The light is on and solid when the tri-color print cartridge is low on ink. – The light flashes when the tri-color print cartridge needs to be serviced.
1 Connection light 2 Error light When the camera is connected correctly, the green Connection light is illuminated. The printer Power light flashes and the Connection light remains lit solid when printing from the camera. If the camera is not PictBridge-compatible or is not in PictBridge mode, the amber Error light flashes.
Paper trays For information about the paper trays, select one of these topics. Unfold the paper trays Follow these steps to unfold the paper trays: 1. Lower the In tray. 2. Lower the Out tray. 3. Pull out the Out-tray extension. In tray The In tray holds paper or other media.
1 In tray Paper guide Print on different sizes of media by sliding the paper guide to the right or to the left. Out tray Printed pages are deposited in the Out tray. 1 Out tray Raise the Out tray to load paper or other media. Lower the Out tray before printing.
To prevent paper from falling out of the Out tray, fully pull out the Out-tray extension. If you are printing in the FastDraft mode, unfold the Out-tray extension stop. 1 Out-tray extension 2 Out-tray extension stop Fold the paper trays Follow these steps to fold the paper trays: 1.
4. Raise the Out tray. 5. Raise the In tray. Print cartridges Three print cartridges can be used with the printer. 1 Black print cartridge 2 Tri-color print cartridge 3 Photo print cartridge Use print.
Replace print cartridges When buying print cartridges, look for the print cartridge selection number. You can find the selection number in three places: ● Selection number label: Look at the label on the print cartridge that you are replacing.
Exit ink-backup mode Install two print cartridges in the printer to exit ink-backup mode. For instructions about installing a print cartridge, see the print cartridge installation page. Automatic paper-type sensor The HP automatic paper-type sensor detects the paper in your printer, and then selects optimal print settings for that media.
4 Connect to the printer ● USB ● Networking USB The printer connects to the computer with a universal serial bus (USB) cable. The computer must be running Windows 98 or later to use a USB cable. For instructions about connecting the printer with a USB cable, see the setup poster that came with the printer.
5 Print photos The printer software offers several features that make printing digital photos easier and improve photo quality. Learn how to perform the following tasks: ● Print a borderless photo . ● Print a photo with a border . ● Use HP Real Life technologies to touch up photos.
If you are using photo paper with a tear-off tab, verify that the tab is pointing away from the printer. 5. Slide the paper guide firmly against the edge of the paper. 1 Small photos 2 Large photos Note Some panoramic paper sizes might extend beyond the edge of the In tray.
Note For maximum dpi quality, go to the Paper/Quality tab, and then click Maximum dpi in the Print Quality drop-down list. – Paper Type : An appropriate photo paper type – Paper Size : An appropriate borderless photo paper size – Orientation : Portrait or Landscape 5.
1 Small photos 2 Large photos Note Some panoramic paper sizes might extend beyond the edge of the In tray. 6. Lower the Out tray. Print Note If your software program includes a photo printing feature, follow the instructions that are provided with the software program.
Use the What's This? help to learn about the features that appear in the Printer Properties dialog box. HP Real Life technologies HP Real Life technologies make it easy for you to get better photos. Automatic red- eye removal and adaptive lighting to enhance detail in shadows are just a few of the technologies included.
The photo print cartridge can be purchased separately if it is not included with your printer. Install the photo print cartridge To install the photo print cartridge, remove the black print cartridge from the printer, and then install the photo print cartridge in the right side of the print cartridge cradle.
The 4800 x 1200 optimized dpi is the highest quality resolution for this printer. When 4800 x 1200 optimized dpi is selected in the printer software, the tri-color print cartridge prints in the 4800 x 1200 optimized dpi mode (up to 4800 x 1200 optimized dpi color and 1200-input dpi).
Follow these steps to select a color management option: 1. Open the Printer Properties dialog box. 2. Click the Color tab. 3. Click one of the following options in the Color Management drop-down list: – ColorSmart/sRGB : ColorSmart/sRGB is an appropriate option for most print jobs.
Storage ● Keep unused photo paper in a plastic bag. Store the packaged photo paper on a flat surface in a cool place. ● When you are ready to print, remove only the paper that you plan to use immediately from the plastic bag. When you have finished printing, return any unused photo paper to the plastic bag.
HP Image Zone help to learn about how you can use the software to easily select and share images by e-mail without the use of large file attachments. User's guide 27.
6 Print photos from a digital camera Learn how to print photos directly from a digital camera: ● About PictBridge ● PictBridge printing About PictBridge With a PictBridge-enabled camera, you do not need a computer to print digital photographs. Just plug the camera into the printer's PictBridge port.
Check the documentation that came with your camera to ensure that your camera supports PictBridge. Follow these steps to print photos from a PictBridge-compatible camera: 1. Load photo paper into the printer. For instructions about loading photo paper, click one of the following options: – Print borderless photos – Print photos with a border 2.
camera. Refer to the documentation that came with your camera for detailed information on printing from the camera. Chapter 6 30 HP Deskjet 5900 series.
7 Print other documents E-mail Letters Documents Envelopes Brochures Greeting cards Postcards Transparencies Labels Index cards Booklets Posters Iron-on transfers Printing tips : Minimize your cost and effort while maximizing the quality of your printouts with printing tips .
5. Lower the Out tray. Print 1. Open the Printer Properties dialog box. 2. Click the Printing Shortcuts tab. 3. In the What do you want to do? drop-down list, click General Everyday Printing or Fast/E.
5. Lower the Out tray. Print 1. Open the Printer Properties dialog box. 2. Click the Printing Shortcuts tab. 3. In the What do you want to do? drop-down list, click Presentation Printing , and then specify the following print settings: – Paper Type : Automatic or Plain paper – Paper Size : An appropriate paper size 4.
1 Letter or A4 paper 2 Legal paper (extends over the edge of the In tray) 5. Lower the Out tray. Print 1. Open the Printer Properties box. 2. Click the Printing Shortcuts tab.
Guidelines ● Avoid using envelopes that have the following features: – Clasps or windows – Thick, irregular, or curled edges – Shiny or embossed coatings – Wrinkles, tears, or other damage ● Align the envelope edges before inserting the envelopes in the In tray.
Guidelines ● Do not print borderless documents in ink-backup mode . Always have two print cartridges installed in the printer. ● Open the file in a software program and assign the brochure size. Ensure that the size corresponds to the paper size on which you want to print the brochure.
3. In the What do you want to do? drop-down list, click Presentation Printing , and then specify the following print settings: – Paper Type : Click More , and then select an appropriate brochure paper.
2. Click the Paper/Quality tab, and then specify the following print settings. – Size is : An appropriate card size – Type is : Click More , and then select an appropriate card type. – Print Quality : Normal 3. Select any other print settings that you want, and then click OK .
Transparencies To print transparencies, use the Printing Shortcuts tab. For great results, use HP Premium Inkjet Transparency Film. Guidelines Do not exceed the In tray capacity: 30 transparencies. Prepare to print 1. Raise the Out tray, and then remove all paper from the In tray.
Guidelines ● Use only paper, plastic, or clear labels that are designed specifically for inkjet printers. ● Use only full sheets of labels. ● Avoid using labels that are sticky, wrinkled, or pulling away from the protective backing. ● Do not exceed the In tray capacity: 20 sheets of labels (use only Letter or A4-size sheets).
Guidelines ● Use only cards and small media that meet the paper size specifications for the printer. For specifications, see the reference guide that came with the printer. ● Do not exceed the In tray capacity: 30 cards. Prepare to print 1. Raise the Out tray, and then remove all paper from the In tray.
Guidelines Do not exceed the In tray capacity: 100 sheets of paper. Prepare to print 1. Raise the Out tray. 2. Slide the paper guide all the way to the left. 3. Place plain paper in the In tray, pushing the paper into the printer until it stops. 4. Slide the paper guide firmly against the edge of the paper stack.
7. Click Continue to finish printing the booklet. Use the What's This? help to learn about the features that appear in the Printer Properties dialog box. Posters For poster printing, sections of the poster are automatically arranged on individual sheets that can be taped together.
5. Lower the Out tray. Print 1. Open the Printer Properties dialog box. 2. Click the Paper/Quality tab, and then specify the following print settings: – Size is : An appropriate paper size – Type is : Automatic or Plain paper 3.
5. Slide the paper guide firmly against the edge of the paper stack. 6. Lower the Out tray. Print Note If your software program includes an iron-on transfer printing feature, follow the instructions that are provided with the software program. Otherwise, follow the instructions below.
8 Printing tips Save time ● Use the Printing Shortcuts tab. ● Set printer default settings for options that you often use. ● Create print task quick sets for documents that you often print. ● Set the order that the pages print. Save money ● Use Fast/economical printing .
General everyday printing Use General everyday printing to print documents quickly. ● Documents ● E-mail Presentation printing Use Presentation printing to print high-quality documents, including: ● Letters ● Brochures ● Transparencies Print in grayscale Follow these steps to print in grayscale: 1.
Follow these steps to change the default settings: 1. Click the task tray icon. 1 Task tray icon The Printer Properties dialog box appears. 2. Select the options that you want to use as the default settings. 3. Click OK . A dialog box appears stating that the new settings will be used every time you print.
Note The print quality options that are available on the Printing Shortcuts tab vary depending on the type of document that you are printing. Set the page order The page order determines the order in which your multipage documents print. To set the page order, follow these steps: 1.
Before the document prints, a preview appears. 5. Do one of the following: – Click File and then click Print to HP Deskjet to print the document. – Click File and then click Cancel Printing to cancel the print job. Adjust the print settings as needed before trying to print the document again.
Follow these steps to select a specific paper type: 1. Open the Printer Properties dialog box. 2. Click the Printing Shortcuts tab. 3. In the Paper type drop-down list, click an appropriate paper type. 4. Select any other print settings that you want, and then click OK .
Delete a print task quick set Follow these steps to delete a print task quick set: 1. Open the Printer Properties dialog box. A Print Task Quick Sets drop-down list appears at the top of most tabs. 2. Go to Print Task Quick Sets on any tab where it appears.
Book binding Tablet binding Note Book binding is the most common type of binding. Book binding Follow these steps to print a two-sided document with a book binding: 1. Open the Printer Properties dialog box. 2. Click the Printing Shortcuts tab. 3. In the What do you want to do? drop-down list, click Two-sided (Duplex) Printing .
3. Select the following check boxes: – Print On Both Sides (Manually) – Preserve Layout – Flip Pages Up 4. Select any other print settings that you want, and then click OK .
Resize a document Use the printer software for either of these tasks: ● Print a document on a paper size different from the size for which it is formatted. ● Shrink or enlarge text and graphics on the printed page. Print on a different paper size Use this feature to print a document that is formatted for one paper size on another paper size.
Apply an existing watermark Follow these steps to apply an existing watermark to a document: 1. Open the Printer Properties dialog box. 2. Click the Effects tab. 3. Click a watermark in the Watermarks drop-down list. If you do not want to use one of the listed watermarks, create a new watermark .
9 Printer software ● Use the Printer Properties dialog box to select printing options. ● Use the What's This? help to learn more about specific print settings. ● View the Ink Status wi ndow for the approximate ink level of each print cartridge.
Note This feature might not be available in your operating environment. Print cartridge information and ordering For print cartridge information and to link to HP's Web site for ordering print cartridges, click the Print Cartridge Information button.
10 Maintenance ● Install print cartridges ● Set the auto-off feature ● Align the print cartridges ● Calibrate color ● Automatically clean print cartridges ● Print a test page ● View esti.
1 Selection number label ● Printer documentation: For a list of print cartridge selection numbers, see the reference guide that came with the printer.
6. Remove the replacement print cartridge from its packaging and carefully remove the plastic tape. Hold the print cartridge so that the copper strips are on the bottom and facing toward the printer. 1 Remove plastic tape Caution Do not touch the print cartridge ink nozzles or copper contacts.
8. Close the printer cover. The printer automatically prints a calibration page. For information about storing print cartridges, see Maintain print cartridges . For information about recycling empty print cartridges, see Print cartridge recovery . Warning Keep both new and used print cartridges out of the reach of children.
2. Open the printer Toolbox . 3. Click Align the Print Cartridges . 4. Click Align , and then follow the onscreen instructions. Note This feature might not be available in your operating environment. Calibrate color Perform a color calibration if the colors in photos that are printed with the photo print cartridge consistently look incorrect.
Note This feature might not be available in your operating environment. View estimated ink levels Follow these instructions to view the estimated ink levels of the print cartridges that are installed in the printer: 1. Open the printer Toolbox . 2. Click the Estimated Ink Levels tab.
Manually clean print cartridges If the printer is used in a dusty environment, a small amount of debris can accumulate on the print cartridge contacts.
Maintain print cartridges The following tips will help maintain HP print cartridges and ensure consistent print quality: ● Keep all print cartridges in their sealed packages until they are needed. Print cartridges should be stored at room temperatures (15° to 35° C or 59° to 95° F).
Printer Toolbox The printer Toolbox contains a number of useful tools to enhance the performance of the printer. Use the printer Toolbox to perform the following tasks: ● Set the auto-off function .
11 Troubleshooting ● Printer does not print ● Paper jam ● Paper problems ● Paper mismatch ● Printer is stalled ● Print cartridge problems ● Photos do not print correctly ● PictBridge p.
Check the print queue The printer will not print if a print job is stalled in the print queue. To resolve a print job that is stalled in the queue, complete the following steps: 1. For Windows 2000, click Start , click Settings , and then click Printers .
If you are printing labels, verify that a label did not become detached from the label sheet while passing through the printer. 5. Replace the rear access door securely. 6. If the paper jam cannot be removed from the back of the printer, raise the printer cover, remove the paper jam from the front of the printer, and then lower the cover.
document, always have the tri-color print cartridge and a black or photo print cartridge installed. Out-of-paper message If an out-of-paper message appears, follow these guidelines . Paper jam For information about clearing a paper jam, see the paper jam page.
If the paper size and type match the paper in the In tray, proceed to step 2 below. If the size and type do not match, select the matching paper size and type or change the paper in the In tray. 4. Press the Resume button to continue printing. In the printer software , follow these steps: 1.
2. Read the selection number on the print cartridge label. 1 Selection number 2 Warranty date 3. Check the list of print cartridges that can be used in the printer. a. Open the printer Toolbox . b. Click the Estimated Ink Level tab. c. Click the Print Cartridge Information button and view the list of print cartridge selection numbers.
Note You can print with one print cartridge in ink-backup mode if you do not have a replacement print cartridge available. 5. If the Print Cartridge Status light continues to flash after replacing the print cartridge, visit HP Technical Support at www.
Tab Setting Paper/Quality Size is : An appropriate paper size Type is : An appropriate photo paper Print Quality : Best or Maximum dpi Colors are tinted or incorrect If colors in photos appear tinted or incorrect, follow these steps: 1. Verify that neither print cartridge is low on ink .
Fading occurs on the edges of a photo Verify that the photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, then use photo paper that is not curled.
PictBridge problems Images in a connected digital camera do not print There are several reasons wh y images in a connected digital camera do not print: ● The digital camera is not PictBridge-compatible. ● The digital camera is not in PictBridge mode.
State of the lights Task Connection light is on and the Error light flashes twice The camera has requested an unsupported command. Print quality is poor Streaks and missing lines If your printed pages are missing lines or dots or if streaks appear, the print cartridges might be low on ink or might need to be cleaned .
● Verify that the protective piece of plastic tape has been removed from the print cartridges. 1 Remove plastic tape ● Consider selecting a higher print quality . Blank pages print ● The protective piece of plastic tape might still be attached to the print cartridges.
3. Click Document Options , and then click Printer Features . 4. Click Dry Time , then select Change in the drop-down list, and then click the Change button. A Dry Time slider appears. 5. Move the Dry Time slider toward Less or More . 6. Click OK . 7.
Envelope is printed at an angle 1. Slide the flap inside the envelope before loading it in the printer. 2. Confirm that the paper guide fits firmly against the edge of the envelope. 3. Reprint the envelope. Document does not reflect the new print settings The printer settings might differ from the software program print settings.
Horizontal lines appear on a photo If light or dark horizontal lines appear on photos: 1. Clean the print cartridges. 2. Reprint the photo. 3. If the lines still occur, align the print cartridges. 4. Reprint the photo. Image is printed at an angle Verify that no problem exists with the source image.
Ink smears Follow these guidelines if ink smears appear on the back of the photos, or if the paper sticks together: ● Use an HP photo paper. ● Verify that the photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it the opposite direction of the curl until the paper lies flat.
Fading occurs on the edges of a printout Verify that photo paper is not curled. If the photo paper is curled, place the paper in a plastic bag and gently bend it in the opposite direction of the curl until the paper lies flat. If the problem persists, then use photo paper that is not curled.
For most paper types If the photo has an unwanted border, try one of the following solutions: ● Align the print cartridges . ● Open the Printer Properties dialog box, click the Paper/Quality tab, .
Error messages Out of paper message If you receive an out of paper message, follow these guidelines . "There was an error writing to USB port" The printer might not be receiving correct data from another USB device or USB hub. Connect the printer directly to the USB port on the computer.
"Print cartridge is in the wrong slot" If you receive this error message, the print cartridge is installed in the wrong side of the print cartridge cradle. Always install the tri-color print cartridge in the left print cartridge cradle compartment.
1 Power light 2 Print Cartridge Status lights 3 Resume light Power light is flashing 1 Power light If the Power light is flashing, the printer is preparing to print.
Resume light is flashing 1 Resume light If the Resume light is flashing, check the following conditions: ● The printer might be out of paper. Place paper in the In tray, and then press the Resume button. ● There might be a paper jam. Follow these instructions to clear a paper jam .
1. The left status light represents the tri-color print cartridge, which is installed in the left side of the print cartridge cradle. 2. The right status light represents the black or the photo print cartridge . One of these print cartridges is installed in the right side of the print cartridge cradle.
Document prints slowly Multiple software programs are open The computer resources are insufficient for the printer to print at its optimum speed. To increase printer speed, close all unnecessary software programs when printing.
12 Supplies ● Paper ● USB cables Paper To order media such as HP Premium Paper, HP Premium Inkjet Transparency Film, HP Iron-On Paper, or HP Greeting Cards, go to www.
13 Specifications ● Printer specifications Printer specifications See the reference guide that came with your printer for complete printer specifications, including this information: ● Types, size.
14 Environmental information ● Environmental statement ● Print cartridge recovery Environmental statement Hewlett-Packard continuously improves the design processes of its deskjet printers to minimize the negative impact on the office environment and on the communities where printers are manufactured, shipped, and used.
Recycling information for the European Union Important recycling information for our customers in the European Union: To preserve the environment, this product must be recycled after its useful life as required by law. The symbol below indicates that this product may not be disposed in the general trash.
fabrication processes, copper wire, steel plates, and the precious materials used in electronics. Depending on the model, HP is able to recycle up to 65% of the print cartridge by weight. The remaining parts that cannot be recycled (ink, foam, and composite parts) are disposed of in an environmentally responsible manner.
Index A adaptive lighting 22 AdobeRGB 24 aligning print cartridges 62 auto-off feature 62 automatic paper type sensor 16 B booklet printing 41 borderless printing guidelines 81 brightness 24 brochure .
verifying print settings 74 Photo projects 26 PhotoREt printing 23 Photos Online sharing 26 Other projects 26 Sharing 26 photos, digital 22 PictBridge lights 9 PictBridge problems 77 postcard printing.
print cartridge problem message 73 Print Cartridge Status light is flashing 89 print is faded 78 printer does not feed paper 70 printer ejects paper 70 printer is not printing 68 printer is stalled 72.
100 HP Deskjet 5900 series.
デバイスHP (Hewlett-Packard) 5900 Seriesの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) 5900 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) 5900 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) 5900 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) 5900 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) 5900 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) 5900 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) 5900 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) 5900 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
