HP (Hewlett-Packard)メーカーCE708A#BGJの使用説明書/サービス説明書
ページ先へ移動 of 178
HP COLOR LA SERJET ENTERPRISE CP5520 PRINTER SERIES Software Technical Reference.
.
HP Color LaserJet Enterprise CP5520 Series Printer Software Technical Reference.
Copyright and license Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.
Table of contents 1 Documen t and product basics ..... .............. .............. .............. .............. ............... .............. . 1 Purpose and scope ...... ........... ......... ........... ........... ........... ........... ......
Use the Back , Next, Finish, and Canc el buttons .......................................................... 27 Set a defau lt printer ... ......... .......... ........... .......... .......... .......... ........... .......... .......... ... 27 Install optiona l software .
Paper/Quality tab fea tures ......... ........... ........... .......... ........... ............ ........... ............ ......... .... .. 52 Paper Op tions ........ ........... ........... ........... ........... ........... .......... ........... .
Page Order ......... ............ ............ ............ ............ ......... ............ ............ ... 77 Document preview image ..... ........... .......... ........... ........... ........ ........... ........... ........... 77 Orientation .
Installing external fonts ...... ............. ............ ............. ........... ........ 99 Removing external fonts ........................................................... 100 Installabl e Options ........................ ...................
Troubles hooting the pro duct setup ..................................... ........ 121 Remove so ftware from Mac o perating syste ms ........... ............... ................ ............... ................ 122 HP Printer Utility for Mac ..... ...
Print-read y file printin g in UNIX systems ...................................................... ............. 149 Special p aper guidel ines ................... ............................ ................................. ...................... 150 Media attribu tes and comma nds .
x ENWW.
List of tables Table 1-1 Software CD s upported languag es ........... ........................ ........................ ........................ ........ 4 Table 1-2 Supported printer d river languages ...... .............. ............. ....
xii ENWW.
List of figures Figure 3-1 Software Installation — Connection Type scr een fo r US B co nn ect ed i nst all atio n ...................... 23 Figure 3-2 Software installation — Connection Type sc ree n fo r net wor k co nn ecte d in sta lla tio n .
Figure 4-23 Font Substitution Table ..................... .................... ..................... .................... .............. 98 Figure 4-24 HP Font Installer dialog box ... .............. .............. ............. ............. .
1 Document and product basics The chapter provides inform ation about these topics: ● Purpose and scope ● Software availability and localization ENWW 1.
Purpose and scope This software technical reference (STR) provides information about, and troubleshooting tips for, the printing-system software for the product.
Software availability and localization This section provides information about the avail ability of the HP Color LaserJet Enterprise CP5520 Series Printer printing-sys tem software and related software and fi rmware. Printing-system software on a CD is available from HP fulfillment centers.
The Utilities folder contains the file s to run these stand-alone utilit ies: ● FileToEmail ● Scrubber CD versions and language support The HP Color LaserJet Enterprise CP5520 Ser ies Printe r printing-system software CD is available with the following components and languages.
Table 1-1 Software CD supported languages (continued) Language Two-letter abbreviation HP-preferred name File designation Spanish ES Espanol ESWW Swedish SV Svenska SVWW Thai TH Thai THWW Traditional .
Driver languages The HP Color LaserJet Enterprise CP 5520 Series Printer product provid es driver support in the following languages. Table 1-2 Supported printer driver languages Component Language li.
Installer languages The HP Color LaserJet Enterprise CP5520 Series Pr inter product provides installer component support in the following languages. Table 1-3 Installer compon ent languages Component .
Documentation languages The HP Color LaserJet Enterprise CP5520 Series Printer product provides do cumentation in the following languages. Table 1-4 Document ation lang uages Component Language list ● HP Color LaserJet Enterprise CP5520 Series Printer User Guide (.
2 Windows software description Introduction The HP Color LaserJet Enterprise CP 5520 Series Printer produ ct comes with software and installers for Microsoft Windows and Apple Computer, Inc., Ma cintosh syste ms. Linux and UNIX systems are supported, and software is avail able on the Web.
Advanced color use Color Access Control The HP Color LaserJet Enterprise CP5520 Series Printer has the ability to monitor and control color print-job use. For more information about color acce ss control, go to the following Web site and loo k under Learn More .
3. Press the up arrow or the down arrow to scroll to Restrict Co lor Use , and then press the OK button. 4. Press the up arrow or the down arrow to scroll to one of the follo wing options, and then p ress the desired option: ● Enable Color . This is the default setting.
HP Print View Software Use HP Print View softwa re to change various pr int settings and see immediately how those changes affect your document. When you are satisfied with the print settings, print the job directly from HP Print View to your supported and networked printer.
Font support The basic fonts listed here are includ ed wi th Microsoft Windo ws software. NOTE: For complete font support information, see the Microsoft Windo ws documentation.
HP Driver Deployment Utility The HP Driver Deployment Utility (HP DDU) was created to simplify the deployment of print drivers onto a client computer. It is a simple utility that packages the printer-driver files, and the code needed to deploy them, into 2 files: an .
HP Driver Configuration Utility The HP Driver Configuration Utility (DCU) is a smal l Windows applicatio n used to edit the configuration file associated w ith a particular driver . The configurati on file controls the print driver settings and takes effect when the driver is installed.
16 Chapter 2 Windows so ftware description ENWW.
3 Install Windows software and utilities Introduction The HP Color LaserJet Enterprise CP 5520 Series Printer produ ct comes with software and installers for Microsoft Windows and Apple, Inc., Macintosh syst ems. Linux and UNIX systems are supported, and software is available on the Web.
Supported operating systems for Windows Windows operating systems provide full-featured support fo r the HP Color Lase rJet Enterprise CP 5520 Series Printer product. Operating syst ems that are not described here provide varying levels of functionality.
System requirements The system requirements for installing and using the HP Color Laser Jet Enterpris e CP5520 Series Printer printing-system software for Wind ows and Macintosh a re as follows: ● S.
Install overview The software for the produc t comes on a single CD. The software in staller first checks the versions of Windows In staller and Mi crosoft .NET ins talled on the system, and then inst alls the printing-system software from the CD onto the hard disk a nd updates Windows files.
Installation options The printing-system software can be used with the product in the following configurations: ● Install the printing-system software on a computer that is dire ctly connected to the product through a USB port.
Detailed Microsoft Windows installation instructions The dialog boxes shown here appear in the Windows XP Professional installation sequence. The order and appearance of dialog boxes can vary among operating systems.
4. Read the license agr eement, select the I have review ed and accept the installation agreements check box, and then click the Next button to continue to the Connection Type screen. 5. Select a connection type option on the Connection Type screen, based on how the product connects to the computer.
b. Connect the product to the computer when prompted at the Co nnect your Product now screen. c. Click the Next button. ● For wired network connected products, follow these steps: a. Select the Connect through a wired network opti on. Figure 3-2 Software installation — Connection Type screen for network connected installation b.
NOTE: At the product control panel, touch the Network Address button to identify the product IP address or host name. d. Click the Next button. e. A list of products is displayed on the Network Produc t(s) Found scree n.
6. When the installation completes, the following scr een appears. Register your produc t by selecting the Register this product with HP chec k box, make this product your default pr oduct by selecting the Set as default printer check box, and send a test page to the produc t by selecting the Print a test page check box.
Use the Back, Next, Fini sh, and Cancel buttons The following buttons appear on various dial og boxes during the installatio n process. ● Back . Click this button to return to the previous dialog box. ● Next . After you select any options on a given screen, click this butto n to procee d to the next step in the installation sequence.
Install optional software Use the following steps to install optional software progr ams: 1. Insert the HP Color LaserJe t CP5525n software CD into the CD- ROM drive. The installer program should open. If the installer program has not started after 30 seconds , complete these steps: a.
● HP Driver Configuratio n Utility (Online) ● Eco Print Solutions Console (Online) 4. Click the Get Specialized Drivers button to gain access to the fo llowing software: ● HP Universal Print Dri.
Uninstall software NOTE: If the printer driver was insta lled by using the HP Driver Installation Utili ty, follow the instructions in the Uninstall the printer driver by using the Windows Add or Remove P rograms feat ure on page 31 .
Uninstall the printer driver by using the Windows Add or Remove Programs feature If the printer driver was installed by the HP Driver Installation Utility (HP DIU), perfor m the following to uninstall the driver: NOTE: You do not need the HP Color LaserJet CP55 25n printing-system software CD to use this uninstall method.
4. The HP Driver Uninstall Utility launches. Click Uninstall to start the uninstall proce ss. Click Cancel to exit the HP Uninstall Utility. Figure 3-9 HP Driver Uninstall Utility screen 5. When the Uninstall is complete, you will be prompted to rebo ot the computer.
NOTE: To uninstall the software, you must l og on with Administrator privileges. 1. Close all progra ms. 2. On the Start menu, click Settings , and then do one of the following: Windows XP Professional and Windows Server 2003 : Click Printers and Faxes .
34 Chapter 3 Install Windows software and utilities ENWW.
4 HP PCL 6 print driver for Windows Introduction This chapter describes the features of the HP Color LaserJet Enterprise CP5520 Series Printer PCL 6 Print Driver for, Windows XP (32-bit), Windo ws Server 2003 (32-bit) , Windows Server 2008 (32-bit and 64-bit), Windows Vista (32-bit and 64-b it), and Windows 7 (32-bit and 64-bit).
● Device Settings tab features ● About tab features Change the printer driver settings for Windows Operating System To change the settings for all print jobs until the software program is closed To change the default settings for all print jo bs To change the device configuration settings Windows 7, XP, Server 2003, and Vista 1.
Click Properties after right-clicking the device name to gain access to the Properties tab set, which controls the driver behavi or and driver connections. Properties tab set The Properties tab set contains information about an d options for co nfiguring the product.
Help system The HP PCL 6 Print Dr iver includes a full-featur ed He lp system to provide assi stance with printing and configuration options. “What's this?” Help Windows XP, Windows Server 20 03, Windows Server 2008, Windows Vista, and Windows 7 support What's this? Help.
NOTE: In this example, the co nflict can be resolved ma nually. If the con flict is not resolved when the driver is closed, then the same dialog appears aga in when a print job is sent to the product.
Advanced tab features NOTE: The Advanced tab is located on the Printing Preferences tab set. Use the Advanced tab to change the layout of printed pages.
Copy Count Copy Count specifies the number of copies to print. This driver setting is usef ul fo r software programs that do not provide a co py count. If a co py count is ava ilable in the softwa re program, set the copy count in the software program.
Document Options The Document Options setting contains th e following controls: ● Advanced Printing Features ● Print Optimizations ● Printer Features ● Layout Options Advanced Printing Fe atur.
Printer Features The Printer Features setting contains th e following controls: ● Print All Text as Black The feature is Disabled by default. When Enabled is selec ted, the driver pr ints all text as blac k regardless of the original document text color.
Page Order specifies the order in which the pa ges of your document are printed. Front to Back prints the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last. NOTE: The page-ordering operation works on whole sheets of paper rather than on individual logical pages.
Printing Shortcuts tab features ● Use defined printing shortcuts ● Create a custom printing shortcut NOTE: The Printing Shortcuts tab is located on the Printing Preferences tab set. Use the Printing Shortcuts tab to store specific combination s of driver settings for easy use.
Use defined printing shortcuts The Printing Shortcuts tab contains the followin g pre-define d shortcuts: ● General Everyday Printing ● Eco-print (Two-sided Printing) ● Factory Defaults ● Enve.
● 5x8 ● A3 ● A4 ● A5 ● A6 ● RA3 ● SRA3 ● RA4 ● SRA4 ● B4 (JIS) ● B5 (JIS) ● B6 (JIS) ● 10x15 cm ● 8k 270x390 mm ● 16k 195x270 mm ● 8k 260x368 mm ● 16k 184x260 mm ● .
Paper source The following options are available: ● Automatically Select (default) ● Printer auto select ● Manual Feed in Tray 1 ● Tray 1 ● Tray 2 ● Tray 3 ● Tray 4 (available on HP Colo.
Paper type The following options are available: ● Unspecified (default) ● Plain ● HP Color Laser Matte 105g ● HP Premium Choice Matte 12 0g ● HP Color Laser Brochure Matte 160g ● HP Superi.
● Preprinted ● Prepunched ● Colored ● Bond ● Recycled ● Rough ● HP Tough Paper ● Opaque Film Orientation The following options are available: ● Portrait (defau lt) ● Landscape Eco-.
● Paper type: Unspecified ● Orientation: Portrait ● Color options: Color Envelopes ● Paper sizes: Envelope #10 ● Paper source: Automatically Select ● Paper type: Unspecified ● Orientation: Portrait Create a custom printing shortcut 1. Select General Everyday Printing as a base.
Paper/Quality tab features NOTE: The Paper/Quality tab is located on the Printing Preferences tab set. Use the Paper/Quality tab to specify paper size, type, and source. You can also use this tab to specify different paper selections fo r the front cover, first page, othe r pages, last pa ge, and back cover of the document.
Paper Options The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the pages of the document. The following figure shows the Paper Options group box and the selections that are available by default .
a paper-size setting, su ch as NotePad, or when you are produc ing a book or a booklet that does not require different paper sizes. NOTE: Certain softwar e programs can overr ide the size comm and and specify different p aper sizes within a single document.
The name that appears in the Name text box depends on th e following conditions: ● If a saved custom pa per size has been se lected from the dr op-down menu on the Paper/Quality tab, then the Name text box shows the name of the se lected custom paper size.
Table 4-1 PCL 6 custom paper sizes Tray Dime nsions Minimum Maximum Tray 1 (100-sheet multipurpose) Width 76 mm (3 in) 320 mm (12.6 in) Length 127 mm (5 in) 356 mm (18.5 in) Tray 2 (250-sheet) Width 148.0 mm (5.83 in) 297 mm (11.7 in) Length 182.0 mm (7.
Click the + next to Type Is and its subc ategories to v iew all of the paper types that the product supports, listed in th e following categories. ● Everyday <96g ◦ Unspecified ◦ Plain ◦ Li.
◦ Card Glossy 176-220g ◦ HP Color Laser Photo Glo ssy 220g ● Other ◦ Color Laser Transparency ◦ Labels ◦ Letterhead ◦ Envelope ◦ Preprinted ◦ Prepunched ◦ Colored ◦ Rough ◦ HP Tough Paper ◦ Opaque Film The default setting is Unspecified .
Use the Covers options to include a blank or preprinted cover on a document, or to include a front/ back cover from a source tray that is different fr om the one used for the re mainder of the document. The following ar e the Covers options: ● Add a blank or preprinted cover: Select which cover is customized: Front , Back , or Both .
The following ar e the Print pages on differen t paper opti ons: ● Pages in document. Select which pages are customized: the First page, the Last page, or specify a page range with the Pages option. ● Paper source: The Paper source setting specifies the source tray to use for pri nting a document.
The following ar e the Insert blank or preprinted pages options: ● Blank or preprinted sheet befor e page(s): Specify where in the docu ment you want to insert blank or pre printed pages by de signating the page numbers or page ranges that the blank or preprinted pages w ill precede.
Document preview imag e The document preview image is a line-drawn image of a page that represents graphics and text. The document preview image is always oriented so that the contents of the page are right-side-up.
Effects tab features NOTE: The Effects tab is located on the Printing Preferences tab set. Use the Effects tab to create unique paper ef fects such as scaling and wate rmarks.
Resizing Options The Resizing Options group box consists of the following controls: ● Actual Size (default) ● Print Document On ● Scale to Fit ● % of Actual S ize Actual Size Actual Size is the default setting. It prints the do cument without changing the document size.
preview images for a document forma tted for Legal-size paper with the Print Do cument On check box selected, and the ta rget size specifie d as Letter .
document preview image appears in the upper-right corner of the follo wing Printing Preferences driver tabs: ● Printing Shortcuts ● Paper/Quality ● Effects ● Finishi ng ● Color Switching between tabs does not change the location or ap pearance of th e document preview image.
Click Edit , and the Watermark Details dialog box ap pears. Figure 4-13 Watermark Details di alog box The dialog box shows a pr eview image and provid es options for creating a new watermark and controlling the message angle and font attribu tes. Click OK to accept all of t he changes that are made in the Watermark Details dialog box.
To delete a wa termark, se lect the watermark in the Current Watermarks list, and then click Delete . A warning appears asking whether y ou are sure you want to delete the selected item. Click Cancel if you want to keep the watermark. Click OK to delete the selected watermark.
◦ Yellow ◦ Green ◦ Cyan ◦ Blue ◦ Magenta ● Shading The default Shading setting for new and pr eset watermarks is Very Light . The following range of shades is available from the Shading dr.
Default watermark settings The following table sh ows Font Attribute settings for new and preset watermarks. Table 4-2 Font Attribute settings fo r new and preset watermarks Setting New watermark Pres.
Finishing tab features NOTE: The Finishing tab is located on the Printing Preferences tab set. Use the Finishing tab to print booklets and control the p aper output.
● Flip Pages Up ● Booklet Layout ● Pages per Sheet ● Print Page Borders ● Page Order Print on Both Sides NOTE: This feature is calle d Print on Both Sides (manually) for the HP Color LaserJet CP5525n, because th ese models do not include an au tomati c duplex unit.
◦ Envelope C6 ◦ Envelope DL Print on both sides automatically The duplexing unit in the HP Color LaserJet Enterprise CP5520 Series Printer product prints on two sides of a sheet of paper when the Print on Both Sides option is specified in the print job.
Select the paper t ype that corresponds to the paper that you are using for the print job. The following paper types have a different p rint modes when you manually pri nt on the secon d side: ● Pla.
Figure 4-15 Print on Both Sides Instruct ions dialog box When you have completed the steps that appear in the dialog box, the second half of the print job prints on the back side of the stack of paper. The driver does not require the program to specifically support odd- and even-page printing, becaus e the driver coordinates this function.
Booklet Layout The Booklet Layout drop-down menu, visible when Print on Both Sides is selected, offers choices that are based on the current paper size.
Print Page Borders Print Page Borders sets a line around each page image on a printed sheet to help visually define the borders of each logic al page. Page Order The Page Order drop-down menu contains.
Switching between tabs does not change the location or ap pearance of th e document preview image. When you move the mou se over the document p review image, the mouse curs or changes from an arrow to a gloved hand. You can toggle between port rait and landsc ape page orientation by clicking the image.
Job Storage tab features NOTE: The Job Storage tab is located on the Printing Preferences tab set or the Properties tab set. Use the job-storage feature to store print jobs in the HP Color LaserJet Enterpri se CP5520 Series Pr inter product memory or hard disk for printing at a later time.
5. Select Job Storage . 6. Select Disabled in the Change 'Job Storage' Setti ng dialog box that appears . If the job-storage feature is enabl ed (without installi ng a hard disk but with at .
● Status group box ● Job Stor age Mode ● PIN to print ● Job Notification Options ● User Name ● Job Name ● Use job-stor age features whe n printing Status group box The unlabeled group box on the Job Storage tab contains a status message about the destination of a print job.
After it is released for printing, the proof-and-hold job is immediately deleted from the product. If more copies are needed , you must rep rint the job from th e software program.
Stored Job To use the Stored Job option, a hard disk must be installed on the product an d the job-storage feature must be en abled. Use the Stored Job option to send a print job directly to th e printer hard disk without printing it. The print job is stored in the product as if it is an electronic file cabinet.
User Name Use the User Name settings to help identify the job at the product control panel. The following are the User Name settings: ● User Name. This option associates your Windows us er name with the stored print job. The Windows user name auto matically appears in th e text field below the User Name options.
Use job-storage features when printing To use job- storage features when printing, follow these step s: 1. Click File , and then click Print from the softwar e program. The Print dialog box appears. NOTE: Clicking the print icon in the software program toolbar prints the job without using job- storage features.
Delete a job-storage print job Sometimes it is necessary to delete a print job fr om the printer hard disk. You can do this from the product control panel. 1. Press the Home button to open the menus. 2. Press the up arrow or the down arrow until Retrieve Job From Device Memory is highlighted on the prod uct control panel, and then pr ess OK .
Color tab features NOTE: The Color tab is located on the Printing Preferences tab set. Use the Color tab to specify predefined colo r-opti on settings o r to fine -tune the color treatments and halftoning. Color output can also be converted to grayscale.
Color Options Use the Color Options group box to adjust the inde pendent color controls. The settings affect the print job color re ndering and print qu ality. The Color Options group box contains the following co ntrols: ● Automatic option (default) ● Manual option ● Settings button (Click this button to open the Color Settings dialog box.
Figure 4-19 Color Settings dialog box The Color Settings dialog box contains the following controls: ● General ◦ Edge Control ● Text ◦ Neutral Grays ◦ Halftone ● Graphics ◦ Neutral Grays.
General Use the General setting group to control Edge Control settings for all color printing. Edge Control determines how edges are rendered. Edge Control consists of three components: ● Adaptive H.
The following Halftone options are a vailable: ● Detail . This is the default option; it is useful fo r text and graphics that require sharp distinctions among lines or colors, or for images that contain a pattern or a high level of detail. Select this option for sharp edges and detail.
Vivid (sRGB) The Vivid (sRGB) feature instructs the printer to increase the color saturation in the midtones. Less colorful objects are rendered more colorful ly. This value i s recommended fo r pr inting business graphics . None Select None to instruct the printer to print RGB data in raw dev ice mode.
HP EasyColor If you are using the HP PCL 6 printer driver for Windows, the HP EasyColor technology automatically improves mixed-content documents that are printed from M icrosoft Off ice programs . This technolog y scans documents and automatically adjusts phot ographic images in .
Figure 4-20 Color tab 94 Chapter 4 HP PCL 6 pri nt driver for Windows ENWW.
Services tab features NOTE: The Services tab is located on the Printing Preferences tab set or the Properties tab set. The Services tab is shown in the following figure.
● Product manuals . View or download HP Color LaserJet Enterprise CP5520 Series Printer product manu als. ● Check for driver updates . Automatically check yo ur print drivers to see whether the correct and most up-to-date print drivers are installed.
Device Settings tab features NOTE: The Device Settings tab is located on the Properties tab set. Available options depend on the feat ure. The following fi gure shows the Device Settings tab.
The trays listed in the Form to Tray Assignment setting include standard trays and optional accessory trays. Generally, items that ar e installed separately have a separate Installable Options setting. The input trays listed here are also listed as paper source s on the Paper/Quality tab.
Click the External Fonts option to make the Properties button available. Click Properties to open the HP Font Installer dialog box, which is shown in the fo llowing figure. Figure 4-24 HP Font Installer dialog box Installing external fonts Follow these steps to install external fonts.
Removing external fonts 1. In Windows Vista and Wind ows 7, click the Star t button, click Control Panel , click Hardware and Sound , and then c lick Printer s . In Windows XP, Windows Server 2003, and Windows Server 2008, click Start , click Settings , and then clic k Printers and Faxes .
Automatic Configuration Use the Device Settings tab to tell the driver ab out the hardwa re configuration of the product. If bidirectional communication is enab led in a supported env ironment, up date this tab by selecting the Update Now setting in the Automatic Configuration setting.
NOTE: The HP Color LaserJet Enterprise CP5520 Series Printer product supports smart duplexing. The product uses the smart duplexing feature to detect in formation on both sides of the print job pages and only runs the pages through the duplexing unit if printable information appears on the second side of the page.
job that is sent when the mopier is disabled lose s the advantage of transmitting the print job once, because the job is sent through th e network for each collated copy. Mopier mode and collation Mopying and collating print jobs are independent but closely related functions.
About tab features NOTE: The About tab is located on the Properties tab set. The About tab provides detailed information about driver component versions. It contains an overall build version number (in parentheses after the model name) together with specific information abo ut each of the components.
5 Macintosh software and utilities Introduction The HP Color LaserJet Enterprise CP5520 Series Printer comes with software and installers for Apple, Inc.
Determine the Mac driver version Mac OS X 10.5 and 10.6 1. From the Apple menu , click the System Preferences menu and then clic k the Print & Fax icon. 2. Select the product in the left side of the window. 3. Click the Options & Supplies button.
Supported operating systems for Macintosh The product supports the following Mac operating systems: ● Mac OS X 10.4, 10.5, 10.6, and later NOTE: For Mac OS X 10 .
Change printer-driver settings for Mac Change the sett ings for all pr int jobs until the software program is closed Change the default settings for all print jobs Change the product configuration settings 1. On the File menu, click the Print button. 2.
● Set a password for the product. ● From the computer, lock out functions on the contro l panel to prevent unauthorized acc ess (see the printing-softw are help). Install notes This text file contains important information about product features, instructions for installing the printing-system software, and technical a ssistance.
Macintosh installation instructions On a Macintos h computer, the i nstallation p roc edures are b asically the same fo r a network administrator, a network client, an d a single user. Install the softwa re on any computer that has save rights to the product.
3. Follow the onscreen instructions to complete the software installation. NOTE: If you are installing the printing-system soft ware on a Macintosh OS X system, be patient. The installer must per form an initial search of the computer for up to 1 minute.
2. The installer pro gram opens. Figure 5-1 Mac installer opening screen NOTE: The file name displayed on your HP LaserJet installer browser screen may be different than the file name displayed in the above figure. NOTE: In the HP LaserJet installer br owser screen, double-click the Documents icon to gain access to the prod uct manuals.
3. In the HP LaserJet insta ller brow ser screen, double-click the prod uct icon to open the installer program Introduction dialog. Figure 5-2 Mac installer Introd uction dialog 4. Click the Con tinue button. The Licens e dialog appears. Figure 5-3 Mac installer License dialog 5.
6. Read the software license agreement, and then click the Continue file. The license agreement dialog appe ars. Figure 5-4 Mac installer license agreement dialog 7. Click the Dis agree button to end the installation and close the installer, or click the Agree button to continue the installation.
8. Select the destination for the software and click Continue . The Installation Type dialog appears. Figure 5-6 Mac installer Installatio n Type dialog ENWW Macintosh installation instructions 115.
9. Click the Go Bac k button to go back to the previous screen. To change the installation location, click the Change Install Location button, navigate to the desired location, click the Continue button, and then click the Inst all button. Go to step 9.
10. An authentication dialog appears. Type the requir ed user name and password, and then click the OK button. Figure 5-8 Mac installer authentication dialo g 11. The Installation d ialog appears. A pro gress bar shows the percentage of the ins tallation progress that has been completed.
12. When the installation is complete, the Summary dialog appears, stating that the installation wa s successful. Figure 5-10 Mac installer Summary dialog Click the Clo se button to exit the installer. NOTE: Complete the instructions in the ne xt section to set up a printer queue.
3. If you are insta lling the prod uc t using a USB connection, verify that the product appears in the printer list. The Name column in the printer list should di splay the product name.
If the Network Address button is not visible, you can fi nd the IP address or host name by printing a configuration page. i. At the product control panel, scroll to and touch the Administration button. ii. Open the following menus: ● Reports ● Configuration/Status Pages ● Configur ation Page iii.
7. In the Optional Trays: drop-down menu, select the trays th at are installed on the product. In Mac OSv 10.5 and v10.6 each tray is listed with a checkbox. 8. For Mac OS v10.4: In the Collation in Printer: drop-down menu, select the amount of memory and hard disk combination that is installed in the product.
If these st eps do not resolve the problem, delete the incorrect print queue, click Add , choose the product from the list, and then br owse manually for the product PPD. Remove software from Mac operating systems You must have administrator rights to remove the software.
HP Printer Utility for Mac The HP Printer Utility is a software program that gives you access to th e product in Mac OS X. The HP Printer Utility does not work when it is inst alled by us ing the AppleTa lk protocol . Use IP, Bonj our or Rendezvous to enable the HP Printer Utility.
Access to the HP (Printer) Utility In Mac OS X v10.4, v10.5, v 10.6, and later, foll ow these steps to gain access to the HP (Printer) Utility: 1. Mac OS X 10.4 and a bove: Open the Finder, c lick Applications , c lick Utilities , and then double-click Printer Setup Utility .
Supplies Status In the Information And Support section of the HP Utility, click Supplies Status to open the Supplies Status screen. Figure 5-13 Supplies Status screen Click Detailed Supplies Information… to open the Supplies Status details scre en. Use the scroll button to see information about the color print cartridges.
The product co nfigurati on page shows othe r settings; cl ick View Configuration Page . Color Usage NOTE: Functionality for this option is not supported on this product in the HP Pr inter Utility for Mac. Use the Embedded Web Server to use this functionality.
File Upload In the Information And Support section of the HP Utility, click File Upload to open the File Upload screen. Figure 5-16 File Upload screen The File Upload command is supported for file types that can be sent dire ctly to the product without first being opened through a software program.
Figure 5-17 Update Firmware screen After you have the firmwa re file, you are ready to begin the u pdate process. Complete the following steps: 1. In the Information And Support section of the HP Utility, sel ect Update Firmware , click Choose , browse to firm ware upgrade file , and then clic k Open .
Upload Fonts In the Information And Support section of the HP Utility, click Upload Fonts to gain access to fonts that you can upload to the HP Color LaserJet Enterpri se CP5520 Series P rinter product. Figure 5-18 Upload Fonts screen The drop-down menu in the Upload Fonts pane has the following options: ● Memory .
Commands The Commands screens gives the user the ability to send special character s or print co mmands to the product after the print job. Figure 5-19 Commands screen HP ePrint Center Simplified printing for internet connected products from anywhere.
Duplex mode For the HP Color LaserJet CP552 5ndn and HP Color LaserJet CP552 5nxh product models, the Printer Settings section includes a Duplex Mode setting. Click this setting to open the Duplex Mode screen. Figure 5-21 Duplex Mode screen Use the E nable Duplex M ode co mmand to print internal diagnostic and te st pages on both sides of the page.
Trays Configuration The Trays Configuration screen is shown in the following figure. Figure 5-22 Trays Configuration sc reen 1. In the Printer Settings section of the HP Utility, select Trays Configuration to change paper size and type for each of the tr ays installed on your produc t.
Figure 5-23 Enable Job Storing screen You can type a PIN for your job in the Enter Secure Job PIN field. Select the number of copies in the Copies to Print field. Select a stored job and click Print to print the job. Select a stored job and click Delete to delete the job.
E-mail Alerts In the Printer Settings section of the HP Utility, select E-mail Alerts to configure the HP Color LaserJet Enterprise CP5520 Series Printer pr oduct to send e-mail notifications to users. If a user name and passwo rd have been set, you might need to obtain them from the IT administrator.
Select Configuration , to modify the following settings: ● DHCP ● BootP ● Manual You can also use this screen to modify the following setting s: ● Host Name ● IP Address ● Subnet Mask ● Default Gateway To save new settings, click Apply Now .
The following options are available in the The highest priority service drop-down menu: ● Port 9100 ● IPP ● LPD-RAW ● LPD-TEXT ● LPD-AUTO ● LPD-BINPS (default) After you select a new setting, click Apply Now to save it.
In the User Defined Low Threshold area, select a percentage life remaining next to the cartridge or image transfer/fuser kit to defi ne the low threshold alert level for that cartridge or image transfer/ fuser kit. Click Apply Now to save the new settings.
To open the HP EWS, click Open Embedded Web Server . For information about HP EWS settings, consult the HP EWS online help. Restrict Color NOTE: Functionality for this option is not supported on this product in the HP Pr inter Utility for Mac. Use the embedded we b server to use this functiona lity.
6 Engineering details Introduction This chapter presents enginee ring detail for the following topics : ● Remote firmware update ● Printing print-re ady documents ● Special paper guidelines ● .
Remote firmware update The product features remote firmware upda te cap ability. The method for downloading remote firmware updates from the Web site is similar to that us ed to download the latest pr inting-system software and printer drivers. NOTE: Firmware for the embedded Jetdirect prin t server updates when th e product firmware is updated.
Use the HP Embedded Web Server 1. Open a brow ser window . 2. Enter the product IP address in the URL li ne to open the HP Embedded Web Server. 3. Click the Troubleshooting tab, and then click the Firmware Upgrade link.
Use the walkup USB port and the Device Maintenance menu 1. Download the .EXE file from the Web, and then un compress the .EXE file to gain access to the readme file and the .bdl upgrade file. 2. Copy the .bdl firmware upgrade file to a portable USB flash memory storag e device (thumb drive).
3. Turn the product on, and when the three control- panel lights are lit, press and hold the S top button 4. Use the arrow keys to scroll to the Administrator menu, and then press the OK button. 5. Use the arrow keys to scroll to the Downlo ad menu, and then press the OK button.
Perform a manual firmware upload 1. Click on Firmware/Firmware Repository in the Device Management pane. 2. A Firmware Repository window disp lays in the center of the screen 3. Click Upload in the u pper-right o f the window. 4. Browse to the .bdl file on the compu ter.
Printing print-ready documents Several methods are available for printing document s independentl y of the original software program that was used to create the document. Normally, the document is printed by opening the original application and printing it to a fi le, or is printed by means of a di stribut ion method such as internet downloading.
Print-ready file printing by using FTP on a direct network connection (Windows) If the HP Color LaserJet Enterprise CP5520 Series Printer uses a direct ne twork connection, use file transfer protocol (FTP) to print a print-ready file. Complete t he following steps for the operating s ystem: 1.
Print-ready printing by using a local Windows port To print directly by using a local Windows port, follow the instructions for your op erating system.
Print-ready file printing by using the LPR command NOTE: This direct printing method is for use in Windows XP , Windows Server 2003, Windows Server 2008, and Windows Vista. Complete the following steps to print a pr int-ready file by using the LPR command.
6. You can drag and drop the firmware file into th e Terminal folder (System/Applications/Utilities/ Terminal). Alternatively, you can type p ut <path> , where <path> is the location where the print- ready file was d ownloaded from the Web.
Special paper guidelines For more information on Special paper guidelines; Supported paper s izes; Supported pap er types; Tray and bin capacity; a nd Paper orientation se e the User Guide at the f ollowing link: www.hp. com/ go/ cljcm4540mfp_manu als .
Media attributes and commands This section includes the following information about paper attributes: ● Paper-source commands ● Paper-type commands examples Paper-source commands The PCL 6 Print driver attr ibute for paper source is ubyte # MediaSource or ubyte_array "string" MediaSource .
Paper-type commands examples The PCL 5 print driver escape sequence for paper ty pe is "Esc&n#Wdpapertype", where "n#" is the number of characters in the paper type plus 1. For example, in the sequence "Esc&n6Wd Plain", "Plain" has 5 letters plus 1, for a total of 6.
File to E-mail utility The File to E-mail utility co llects the data specified in an .INI file and then attaches the data files to an e- mail that can be se nt to HP Customer Support to a ssi st troubleshooting. The utility runs on the computer, but does not interact with the product.
154 Chapter 6 Engineerin g details ENWW.
Index A Adobe Acrobat Reader printing PDF files without 145 alerts, e-mai l Macintosh 134 Alterna tive Lette rhead Mo de supported products 43 B Back button, Wind ows insta llation dialog boxes 27 bla.
duplexing 72 supported products 48 Tray 3 101 E e-mail troubleshootin g File to E-mail utility 153 e-mail alerts Macintosh 134 envelopes, paper type commands 152 escape s equences paper source 151 pap.
director y structure, softwar e CD 110 e-mail alerts 134 File Upload command 127 firmware upgrades 127 fonts supported 109 HP EWS 108 HP Printer Utility 123 install notes 109 network settings 134 netw.
job storage settings, Jo b Storage tab 85 Job Storag e tab contents 79 Layout Options setting, Advanced tab 43 Macintosh 108 Manual settings, Color tab 88 mopier mode, Device Settings tab 102 Neutral .
R regional versions, CD 4 remote firmware updates about 140 determine current firmware level 140 downloading 140 HP Web Jetadmin 143 Macintosh 127 removing Mac software 122 RFU.
160 Index ENWW.
.
© 20 1 0 Hew lett-P ack ar d Dev elopment C ompan y , L.P . www .hp.com.
デバイスHP (Hewlett-Packard) CE708A#BGJの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP (Hewlett-Packard) CE708A#BGJをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP (Hewlett-Packard) CE708A#BGJの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP (Hewlett-Packard) CE708A#BGJの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP (Hewlett-Packard) CE708A#BGJで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP (Hewlett-Packard) CE708A#BGJを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP (Hewlett-Packard) CE708A#BGJの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP (Hewlett-Packard) CE708A#BGJに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP (Hewlett-Packard) CE708A#BGJデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
