HPメーカー4800 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 27
HP Scanj et 4 8 00 se r i es Photo S canner Us er's manual.
HP Scanjet 4800 series User's Manual.
Copyright and license © 2005 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice.
Contents 1 How to use the scanner ........ ........... ............ ........... ........... .............. .......... .........2 Scanner setup and initialization ......... ......... ............... ................ ................... .........2 Where to get additional information .
1 How to use the scanner This manual describes how to use the HP Scanjet 4800 series scanner and its accessories, resolve installation problems, and reach customer support. Scanner setup and initialization To set up your scanner and install the scanning software, see the setup poster shipped with your scanner.
Front panel and accessories overview This section presents an overview of the scanner front panel and the transparent materials adapter (TMA). Front panel buttons Icon Feature name Description Scan button Scans pictures, graphics, documents, or objects.
Scan from the HP Solution Center Scan from the HP Solution Center when you want more control during the scanning process, such as when you want to preview the image before the final scan, use more advanced features, or change scan settings. To start the HP Solution Center: 1.
Note If you want to preview scans before they are sent to their destination, select Show Preview in the HP Scanning dialog box. Also see Preview a scanned image in the onscreen Help. 1. Place the original face down on the scanner glass, as indicated by the reference marks, and then close the lid.
Note If you want to preview scans before they are sent to their destination, select Show Preview in the HP Scanning dialog box, or begin your scan from HP Solution Center. Also see Preview a scanned image in the onscreen Help. 1. Place the original face down on the scanner glass, as indicated by the reference mark.
Scan film This section contains information about using the transparent materials adapter (TMA) to scan positives, including 35 mm slides, and negatives. This section describes two HP Scanjet 4800 models. The procedures are not the same for each model.
3. Remove the negative strip holder, if present, from the slide holder. 4. Place the slides into the slide holder. Insert the slides with the top of the slides pointing up and with the front of the slides facing you. 5. Close the scanner lid. Note Make sure that the slides are flat and do not overlap.
Note You must use the negative strip holder to scan 35 mm negatives. Always return the negative strip holder to its storage place inside the slide holder in the scanner lid when done. Before you begin! Check the model number on the scanner lid. The steps below are for the HP Scanjet 4850.
6. Close the scanner lid. 7. Press the Scan Film button ( ) on the scanner, or click Scan Film in HP Solution Center. 8. Select Picture . 9. Select Scan negatives using the Transparent Materials Adapter (TMA) . If you want to preview the scanned picture, select the Show Preview check box on the screen, or begin the scan from HP Solution Center.
3. Place positives in the appropriate template, with the top of the image pointing up. – Place slides in the slide template. Start at the top and fill in rows as you go. – Place medium-format or large-format film strips in the large-format template.
Scan negatives — HP Scanjet 4890 The transparent materials adapter (TMA) is built into the scanner lid. Slides, negatives, and medium- and large-format film have their own unique media holders called “templates.” The templates are rectangular frames that you can use to optimally place your media for scanning.
Note If a light shield is provided, use the negative light shield to cover the remaining area in the in the negative holder if you are scanning fewer than the maximum number of negative frames with the TMA. This ensures that no extra light leaks into the scan.
● To scan positives, such as 35 mm slides, or negatives by using the TMA, press the Scan Film button ( ) on the top of the scanner, or click Scan Film in HP Solution Center. ● When cropping images, completely remove the borders to reduce excess light interference.
Note If Show Preview was selected, you must click the Accept button in the preview screen to initiate the scan. When prompted, click Yes to scan additional pictures, or click No to send the scanned image(s) to the specified location.
2 Care and maintenance Occasional cleaning of your scanner helps ensure higher-quality scans. The amount of care necessary depends upon several factors, including the amount of use, and the environment. You should perform routine cleaning as necessary.
3 Troubleshooting This section contains solutions for common problems with the scanner and the transparent materials adapter (TMA). Scanner installation or setup problems This section contains solutions for installation and setup problems. Uninstall and reinstall the softw are The problem might have occurred because of an incomplete installation.
Cable type Action cable to the scanner and then turn on the computer, in that order. USB cable The USB cable is connected between the scanner and the computer. ● Use the cable that was included with the scanner. Another USB cable might not be compatible with the scanner.
correctly connected, verify that the scanner is turned on, and then test the scanner by using the following procedure: 1. Disconnect the USB cable and power cable from the scanner.
4 Product support Accessibility Web site Customers with disabilities can get help by visiting ww w.hp. com/hpinfo/community/ accessibility/prodserv/ . HP Scanjet Web site Visit www. hp .c o m for a variety of information: ● Learn tips for scanning more effectively and creatively.
while you are in front of your computer and scanner. For faster service, please be prepared to provide the following information: – the scanner model number (located on the scanner) – the scanner .
5 Regulatory information and product specifications This section contains regulatory information and product specifications for the HP Scanjet 4800 series scanner and accessories. Scanner specifications Name Description Scanner type Flatbed with transparent materials adapter (TMA) Size HP Scanjet 4850 : 505 mm x 300 mm x 100 mm (19.
Name Description Up to sixteen 35 mm slides, 30 negative frames, 6 medium-format film, or 1 large-format film for HP Scanjet 4890 Media capacity Slide: 1.05 mm to 3.26 mm thick and 49.8 mm to 50.8 mm on any side Size 287 mm x 84 mm x 50 mm (11.3 x 3.3 x 1.
Chapter 5 24 HP Scanjet 4800 series.
デバイスHP 4800 Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
HP 4800 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP 4800 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP 4800 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP 4800 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP 4800 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP 4800 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP 4800 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP 4800 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。