HPメーカーCompaq nx5000 seriesの使用説明書/サービス説明書
ページ先へ移動 of 220
Main tenan ce and Ser vice Gu id e HP C ompaq Bu sines s Notebook nx5 000 Ser ies C ompaq Pr es ar i o V1000 N o tebook P C Doc ument P art Number : 3 4 90 5 2 -001 Apr il 2004 This guide is a troubleshooting reference used for maintaining and servicing the notebook.
© Copyright 2004 He wlett-P ackard Dev elopment Compan y , L.P . Microsoft and W indo ws are U.S. re gistered trademarks of Microsoft Corporation. Intel, Pentium, and Celeron are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Maintenance and S erv ice Gui de iii Cont e nt s Contents 1 Product Description 1.1 Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–33 1.
i v Maintenance and S ervi ce Gui de Con ten ts 3 Illustrated Parts Catalog 3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1 3.2 Notebook Major Components . . . . . . . . . . . . . . . . . . 3–2 3.3 Miscellaneous Plastics Kit Components .
Con ten ts Maintenance and S ervi ce Guide v 5.14 Heat Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–30 5.15 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–33 5.16 Display Assembly . . . . . . .
Maintenance and S ervi ce Guide 1–1 1 Pr oduc t D esc ription The HP Compaq Business No tebook nx5000 Series and the Compaq Presario V1000 notebook PC of fer adv anced modularity , an Intel® Pentiu.
1–2 Mainte nance and Serv ice Gui de Product D escr ipt ion 1.1 M o d e l s Notebook models are sho wn in T able 1-1, T able 1-2, and T able 1-3. Ta b l e 1 - 1 HP Compaq Business Notebook nx5000 an.
Product D escr ipt ion Maintenance and S erv ice Guide 1–3 Key Cnx U P 170 X5 60 y Ci 10 h XXXXXX-XXX 12 3 4 5 6 7 8 9 1 0 1 1 Ke y Description Options 8 Integrated communication/ wireless de vice M = Modem C = Combination modem + FE NIC N = None b = 802.
1–4 Mainte nance and Serv ice Gui de Product D escr ipt ion Ta b l e 1 - 2 HP Compaq Business Notebook nx5000 Models All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing .
Product D escr ipt ion Maintenance and S ervi ce Guide 1–5 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (Li.
1–6 Mainte nance and Serv ice Gui de Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (L.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–7 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (Li.
1–8 Mainte nance and Serv ice Gui de Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (L.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–9 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (Li.
1–10 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –11 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–12 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –13 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–14 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –15 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–16 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –17 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–18 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –19 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–20 Maintenance and Se r v i ce Guide Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –21 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–2 2 Maintenance and Serv ice Gui de Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–2 3 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–2 4 Maintenance and Serv ice Gui de Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–2 5 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–2 6 Maintenance and Serv ice Gui de Product D escr ipt ion All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–2 7 All HP Compaq Business Note book nx5000 models f eature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium ion (.
1–2 8 Maintenance and Serv ic e Guide Product D escr ipt ion T able 1-3 Compaq Presario V1000 N otebook PC Models All Compaq Presario V1000 no tebook PC models feature: ■ T ouchP ad pointing de vi.
Product D escr ipt ion Maintenance and S erv ice Guide 1–2 9 All Compaq Presario V1000 no tebook PC models feature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium io n (L.
1–30 Maintenance and Serv ice Gui de Product D escr ipt ion All Compaq Presario V1000 no tebook PC models feature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium io n (Li.
Product D escr ipt ion Maintenance and S erv ice Guide 1 –31 All Compaq Presario V1000 no tebook PC models feature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium io n (L.
1–3 2 Maintenance and Serv ic e Guide Product D escr ipt ion All Compaq Presario V1000 no tebook PC models feature: ■ T ouchP ad pointing de vice ■ Video memor y ■ 8- or 6-cell lithium io n (L.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–33 1. 2 F e a t u r e s ■ Intel Pentium M 2.0-, 1.8-, 1.7-, 1.6-, 1.5-, or 1.4-GHz processors, with 1.0-MB or 2.0-MB L2 cache, v arying by notebook model - or - Intel Celeron M 1.4-, 1.3-, or 1.
1–3 4 Maintenance and Se r v ic e Guide Product D escr ipt ion ■ External 65-watt A C adapter with power cord ■ 8-cell 4.4 Ah Li-Ion battery pack -or - 6-cell 4.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–35 1. 3 C l e a r i n g a P a s s w o r d If the notebook you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS. 1. Prepare the notebook for disassembly ( Section 5.
1–3 6 Maintenance and Serv ice Gui de Product D escr ipt ion 1. 4 P o w e r M a n a g e m e n t The notebook comes with po wer management features that extend battery operating time and conserv e po wer .
Product D escr ipt ion Maintenance and S ervi ce Guide 1–3 7 1 .5 External C omponen ts The external components on the front and right side of the notebook are sho wn belo w and described in T able 1-4.
1–3 8 Maintenance and Serv ic e Guide Product D escr ipt ion Ta b l e 1 - 4 Fr ont and Right-Side Components Item Component Function 1 Infrared por t Provides wireless comm unication between the notebook and an optional IrD A-compliant de vice. 2 Mute button On: Mutes the system v olume.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–3 9 The notebook rear panel and left-side components are sho wn belo w and described in T able 1-5. R ear and Le ft Com ponents Ta b l e 1 - 5 Rear and Left-Side Components Item Component Function 1 V ent Allows airflo w to co ol internal components.
1–40 Maintenance and Serv ice Gui de Product D escr ipt ion 5 S-Video connector Connects an optional S-Video de vice, such as a tele vision, VCR, camcorder , ov erhead projector , or video capture card. 6 Exter nal monitor connector Connects an optional e xter nal monitor or ov erhead projector .
Product D escr ipt ion Maintenance and S erv ice Guide 1 –41 The notebook wireless antennae are sho wn belo w and described in T able 1-6. W ir ele ss An tennae L ocati ons Ta b l e 1 - 6 Wireless Antennae Component Description Wireless antennae (2) T ransmit wireless data.
1–4 2 Maintenance and Serv ice Gui de Product D escr ipt ion The notebook ke yboard components are sho wn belo w and described in T able 1-7. K ey boar d C ompo nents.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–43 Ta b l e 1 - 7 Ke yboar d Components Item Component Function 1 Windows logo k e y Displa ys the Windows Star t menu. 2 fn ke y Ex ecutes frequently used system functions when pressed in combination with another ke y .
1–44 Maintenance and Se r v i ce Guide Product D escr ipt ion The notebook top components are sho wn belo w and described in T able 1-8. T op Compo nents Ta b l e 1 - 8 T op Components Item Component Function 1 Num lock light On: Num lock is on or the embedded numeric ke ypad is enab led.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–45 4 Displa y lid s witch* ■ If the notebook is closed while on, tur ns off the displa y . ■ If the notebook is opened while on, tur ns on the displa y . 5 P ower b utton* When the notebook is: ■ Off , press and release to tur n on the notebook.
1–4 6 Maintenance and Se r v ic e Guide Product D escr ipt ion T op Compo nents (C ontinued) Ta b l e 1 - 8 T op Components (Continued) Item Component Function 8 Presentation Mode but t on Alter nates between presentation modes . 9 T ouchP ad Mov es the pointer and selects or activ ates items on the screen.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–4 7 13 Batter y light On: A batter y pack is charging. Blinking: A batter y pac k that is the only a vailab le po wer source has reached a low-battery condition. When the batter y reaches a critical low-batter y condition, the batter y light begins bl inking more quic kly .
1–4 8 Maintenance and Serv ice Gui de Product D escr ipt ion The external components on the bottom of the notebook are sho wn belo w and described in T able 1-9. Bot tom Component s Ta b l e 1 - 9 Bottom Components Item Component Function 1 Intake v ent Allows airflo w to cool intern al components.
Product D escr ipt ion Maintenance and S ervi ce Guide 1–4 9 3 P or t replicator doc king latche s Secures the notebook to an optional P or t Replicator or adv anced P o r t Replicator . 4 Docking connector Connect s the notebook to an optional P or t Replicator or adv anced P o r t Replicator .
1–5 0 Maintenance and Serv ice Gui de Product D escr ipt ion 11 Mini PCI compar tment Holds an optional wireless LAN de vice. ✎ To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devices in your country.
Product D escr ipt ion Maintenance and S erv ice Guide 1 –51 1. 6 D e s i g n O v e r v i e w This section presents a design ov ervie w of k ey parts and features of the notebook. Refer to Chapter 3, “Illustrated P arts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps.
Maintenance and S ervi ce Guide 2–1 2 T roubleshooting Å W ARN IN G: Onl y author i z ed technic ians trained b y HP should r epair this equipment . All tr oubleshooting and r epair pr ocedur es ar e detailed to allo w only subass embl y/module -lev el r epair .
2–2 Mainte nance and Serv ice Gui de T r oubleshooting Using C ompu ter Setup Information and settings in Computer Setup are accessed from the File, Security , or Adv anced menus. 1. T urn on or restart the notebook. Press f10 while the F10 = R OM-Based Setup message is displayed in the lo wer left corner of the screen.
T ro ubleshooting Maintenance and S ervi ce Guide 2–3 Selecti ng fr o m the F ile Me nu Ta b l e 2 - 1 File Menu Select T o Do This System Inf or mation ■ Vie w identification inf or mation about the notebook, a P or t Replicator , and any batter y packs in the system.
2–4 Mainte nance and Serv ice Gui de T r oubleshooting Selec ting fr om t he Securit y Menu Ta b l e 2 - 2 Security Menu Select T o Do This Administrator pass w ord Enter , chan ge, or delete an Administrator pass word. P ower-On pass word Enter , change , or delete a pow er-on pass word.
T ro ubleshooting Maintenance and S ervi ce Guide 2–5 Selec ting fr om t he T ools Menu Selec ting from th e Ad v anced Menu T able 2-3 To o l s M e n u Select T o Do This HDD Self-T est options Run a quick co mprehensiv e self test on hard drives in the system that suppor t the test f eatures.
2–6 Mainte nance and Serv ice Gui de T r oubleshooting De vice Options ■ Enable/disab le the embedded numeric k eypad at star tup . ■ Enable/disab le m ultiple standard pointing de vices at star tup . (T o set the notebook to suppor t only a single, usually nonstandard, pointing de vice at star tup , select Disable ).
T ro ubleshooting Maintenance and S ervi ce Guide 2–7 De vice Options (continued) ■ Specify how the notebook recogniz es multiple identical P or t Replicator s that are identically equipped.
2–8 Mainte nance and Serv ice Gui de T r oubleshooting 2.2 Usin g Dia gnos tic s for Windo w s When you access Diagnostics for W indows, a scan of all system components is displayed on the screen before the diagnostics windo w opens.
T ro ubleshooting Maintenance and S ervi ce Guide 2–9 Obtainin g , Sav ing , or Printin g Dia gnosti c Te s t I n f o r m a t i o n 1. Access Diagnostics for W indows b y selecting Start > Settings > Contr ol Panel > Diagnostics f or W indows.
2–10 Maintenance and Se r v i ce Guide T r oubleshooting 6. Select the Begin T esting button. 7. Select a tab to vie w a test report: ❏ Status tab —Summarizes the tests run, passed, and failed during the current testing session.
T ro ubleshooting Maintenance and S erv ice Guide 2 –11 2. 3 T roub leshooting Flo wch arts T able 2-4 T roub leshooting Flo wchart Over view Flowchar t 2.1—Initial T roubleshooting Flowchar t 2.2—No P ower , P ar t 1 Flowchar t 2.3—No P ower , P ar t 2 Flowchar t 2.
2–12 Maintenance and Se r v i ce Guide T r oubleshooting Flo wch art 2. 1—Initial T roubleshootin g Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to Flowchart 2.
T ro ubleshooting Maintenance and S erv ice Guide 2 –13 Flo wchar t 2.2—No P o wer , P ar t 1 1. Reseat the power cables in the Port Replicator and at the AC outlet. 2. Ensure that the AC power sour ce is active. 3. Ensure that the power strip is working.
2–14 Maintenance and Se r v i ce Guide T r oubleshooting Flo wch art 2.3—No P o wer , P art 2 Continued from Flowchart 2.2—No Power , Part 1. Visually check for debris in battery socket and clean if necessary . Done N Y Power on? Check battery by recharging it, moving it to another notebook, or replacing it.
T ro ubleshooting Maintenance and S erv ice Guide 2 –15 Flo wchar t 2.4—No P o wer , P ar t 3 Continued from Flowchart 2.3—No Power , Part 2. Reseat AC adapter in notebook and at power sour ce. Internal or external AC adapter? Done Done Done Done Power on? Power on? Power on? Plug directly into AC outlet.
2–16 Maintenance and Se r v i ce Guide T r oubleshooting Flo wch art 2.5—N o P o w er , P art 4 Y N Continued from Flowchart 2.4—No Power , Part 3. Reseat loose components and boards and replace damaged items. Open notebook. Loose or damaged parts? Y Close notebook and retest.
T ro ubleshooting Maintenance and S erv ice Guide 2 –17 Flo wchar t 2.6—No Video, P ar t 1 A N Stand-alone or Port Replicator? No video. Replace the following one at a time. T est after each replacement. 1. Cable between notebook and notebook display (if applicable) 2.
2–18 Maintenance and Se r v i ce Guide T r oubleshooting Flo wchar t 2.7—No Video, P ar t 2 Y N Continued from Flowchart 2.6—No Video, Part 1. Done Adjust external monitor display .
T ro ubleshooting Maintenance and S erv ice Guide 2 –19 Flo wchar t 2.8—Nonfunc tionin g P ort Repl icator (i f applic able) Y N Reseat power cord in Port Replicator and power outlet. N Replace the following Port Replicator components one at a time.
2–20 Maintenance and Se r v i ce Guide T r oubleshooting Flo wch art 2.9—No O perating Sy s tem (OS) Loadin g No OS loading from hard drive, go to Flowchart 2.10—No OS Loading, Hard Drive, Part 1. Reseat power cord in Port Replicator and power outlet.
T ro ubleshooting Maintenance and S erv ice Guide 2 –21 Flo wch art 2. 1 0—No OS Loadin g, H ard Driv e, P art 1 Go to Flowchart 2.17—Nonfunc- tioning Device. Y Done N OS not loading from hard drive. Nonsystem disk message? Go to Flowchart 2.11—No OS Loading, Hard Drive, Part 2.
2–2 2 Maintenance and Serv ice Gui de T r oubleshooting Flo wch art 2. 1 1—No OS Loa ding , Hard Driv e, P art 2 Continued from Flowchart 2.10—No OS Loading, Hard Drive, Part 1. Reseat hard drive. Done CD or diskette in drive? 1. Replace hard drive.
T ro ubleshooting Maintenance and S ervi ce Guide 2–2 3 Flo wch art 2. 1 2—N o OS Loadin g, H ard Driv e, P art 3 Y System files on hard drive? Continued from Flowchart 2.11—No OS Loading, Hard Drive, Part 2. Clean virus. Done N Install OS and reboot.
2–2 4 Maintenance and Serv ice Gui de T r oubleshooting Flo wch art 2. 1 3—No OS Loa ding , Disk et te Driv e Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Nonsystem disk message? Bootable diskette in drive? Install bootable diskette and reboot notebook.
T ro ubleshooting Maintenance and S ervi ce Guide 2–2 5 Flo wch art 2. 1 4—No OS Loa ding , CD-ROM or D VD-R OM Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM Drive. Install bootable disc and reboot notebook.
2–2 6 Maintenance and Serv ice Gui de T r oubleshooting Flo wchar t 2. 1 5—No Audio, P art 1 No audio. N Notebook in Port Replicator (if applicable)? Internal audio? Audio? Done Undock. Audio? Done T urn up audio internally or externally . Go to Flowchart 2.
T ro ubleshooting Maintenance and S ervi ce Guide 2–2 7 Flo wch art 2. 1 6—N o Audio, P art 2 YN Continued from Flowchart 2.15—No Audio, Part 1. Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker .
2–2 8 Maintenance and Se r v ic e Guide T r oubleshooting Flo wchar t 2. 1 7—Nonfunc tioning De vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the notebook, and inspect cables and plugs for bent or broken pins or other damage.
T ro ubleshooting Maintenance and S ervi ce Guide 2–29 Flo wch art 2. 1 8—Nonfun ctionin g K e yboar d Y N OK? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external keyboard.
2–30 Maintenance and Serv ice Gui de T r oubleshooting Flo wchar t 2. 1 9—Nonfun ctionin g P ointin g De v ice Y N OK? Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect notebook to good external pointing device.
T ro ubleshooting Maintenance and S erv ice Guide 2 –31 Flo wch art 2.20—No Net w ork/Modem Connec tion Y Disconnect all power from the notebook and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated.
Maintenance and S ervi ce Guide 3–1 3 I llus trated P ar ts C atal og This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers and option part numbers.
3–2 Mainte nance and Serv ice Gui de Illustr ated P ar ts Cat alog 3.2 Notebook Major C ompon ents Noteboo k Major Components.
Illustr at ed P arts Catalog Maintenance and S ervi ce Guide 3–3 Ta b l e 3 - 1 Spare P arts: Notebook Major Components Item Description Spare P art Number 1 Display assemb lies f or use with HP Compaq Bu siness Notebook nx5000 14.1-inch, TFT , XGA 15.
3–4 Mainte nance and Serv ice Gui de Illustr ated P ar ts Cat alog Noteboo k Major Components.
Illustr at ed P arts Catalog Maintenance and S ervi ce Guide 3–5 T able 3-1 Spare P arts: Notebook Major Components (Continued) Item Description Spare P art Number 3 Ke yboar ds (include pointing st.
3–6 Mainte nance and Serv ice Gui de Illustr ated P ar ts Cat alog Noteboo k Major Components.
Illustr at ed P arts Catalog Maintenance and S ervi ce Guide 3–7 Ta b l e 3 - 1 Spare P arts: Notebook Major Components (Continued) Item Description Spare P art Number 6 MultiBay de vices 24X CD-ROM Driv e 8X/24X D VD-R OM Drive 4X D VD+R W/R and CD-R W Combo Drive 24X D VD/CD-R W Combo Drive Diskette driv e 8-cell, prismatic, 3.
3–8 Mainte nance and Serv ice Gui de Illustr ated P ar ts Cat alog Notebo ok Major Components.
Illustr at ed P arts Catalog Maintenance and S ervi ce Guide 3–9 T able 3-1 Spare P arts: Notebook Major Components (Continued) Item Description Spare P art Number 16 Pr ocessors Intel Celeron M processor , 1.4-GHz Intel Celeron M processor , 1.3-GHz Intel Celeron M processor , 1.
3–10 Maintenance and Se r v i ce Guide Illustr ated P ar ts Cat alog 3. 3 M iscell aneous Plas tic s Kit Com ponen ts Miscel lane ous P lastics Kit Components Ta b l e 3 - 2 Miscellaneous Plastics K.
Illustr at ed P arts Catalog Maintenance and S erv ice Guide 3 –11 8 Speaker assemb ly 9 Memor y shield 10 Left and r ight displa y hinge cov ers (2) 11 PC Card slot space sav ers (2) 12 Batter y be.
3–12 Maintenance and Se r v i ce Guide Illustr ated P ar ts Cat alog 3.4 Hard Driv es and MultiB a y De vices T able 3-3 Har d Drives and MultiBay De vices Spare P art Information Item Description S.
Illustr at ed P arts Catalog Maintenance and S erv ice Guide 3 –13 3.5 Miscell aneous Ta b l e 3 - 4 Miscellaneous (not illustrated) Spare P art Information Description Spare P art Number 3-wire pow.
3–14 Maintenance and Se r v i ce Guide Illustr ated P ar ts Cat alog Security car d 345856-001 Screw Kit (includes the f ollo wing scre ws; ref er to Appendix C , “Screw Listing, ” for more inf or mation on screw specifications and usage .) 353394-001 ■ Phillips PM3.
Maintenance and S ervi ce Guide 4–1 4 Remo v al an d Repl a cement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service.
4–2 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr eliminar ie s 4.2 Ser vice C onsidera tions The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures.
R emo v al and Replace ment Pr eliminar i es Maintenance and S ervi ce Guide 4–3 4.3 Pre v enting D am ag e to R emo v able Dr i v es Remov able driv es are fragile components that must be handled with care.
4–4 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr eliminar ie s 4.4 Pr e v enting El ec tr osta tic D ama ge Many electronic components are sensiti v e to electrostatic dischar ge (ESD). Circuitry design and structure determine the degree of sensiti vity .
R emo v al and Replace ment Pr eliminar i es Maintenance and S ervi ce Guide 4–5 ■ Store reusable electrostatic-sensiti v e parts from assemblies in protecti ve packaging or nonconducti v e foam. ■ Use transporters and con veyors made of antistatic belts and roller b ushings.
4–6 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr eliminar ie s 4.7 Groundin g Eq uipm ent an d Methods Grounding equipment must include either a wrist strap or a foot strap with a grounded notebook. ■ When seated, wear a wrist strap connected to a grounded system.
T able 4-1 sho ws ho w humidity af fects the electrostatic v oltage le ve ls generated by dif ferent acti vities. T able 4-2 lists the shielding protection provided b y antistatic bags and floor mats.
Maintenance and S erv ice Guide 5–1 5 Remo v al an d Repl acem ent Pr ocedure s This chapter provides remo v al and replacement procedures. There are 62 scre ws, standof fs, and pins that must be loosened, remov ed, or replaced when servicing the notebook.
5–2 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5 . 1 Serial Number When ordering parts or requesting information, provide the notebook serial number and model number located on the bottom of the notebook.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–3 5 .2 Disasse mbl y Sequenc e Chart Use the chart belo w to determine the section number to be referenced when removing notebook components. Disassembl y Sequence Chart Section Description # of Screws Remo ved 5.
5–4 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5 . 3 Preparing t h e Notebook for Di sassem bl y Before you begin an y remo v al or installation procedures: 1.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–5 4. Remov e the battery pack: a. T urn the notebook upside down, with the front panel to ward you. b . Slide and hold the battery release latch 1 to ward the back of the notebook.
5–6 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5. Remov e the battery bezel b y sliding it do wn and of f of the battery pack. ✎ The battery bezel is included in the Miscellaneous Plastics Kit, spare part number 353393-001.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–7 6. Remov e the hard dri v e by follo wing these steps: a. T urn the notebook upside down, with the rear panel to ward you. b . Remo ve the PM2.5×4.0 retaining scre w 1 that secures the hard dri ve door to the notebook.
5–8 Mainte nance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es e. Use the Mylar tab 1 to pull the hard dri ve 2 out of the bay . f. Remov e the hard dri v e.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–9 Ä CA UTION: The har d dr i v e should be disa ssembled onl y if it is damaged and mus t be r epair ed. U nnecess ar y disas sembl y of the har d dr iv e can r e sult in damage to the har d dr iv e and lo ss of info rmati on .
5–10 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5 .4 N otebook F eet The notebook feet are adhesi v e-backed rubber pads. The notebook feet are included in the Miscellaneous Plastics Kit, spare part number 353393-001. » Attach the notebook feet to the base enclosure as illustrated belo w .
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –11 5 .5 M ini PCI Communica tions Board 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. T urn the notebook upside down, with the rear to ward you. 3. Loosen the PM2.
5–12 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 6. Disconnect the 2 antenna cables 1 from the Mini PCI communications board. Note that the longer cable connects to the rear antenna terminal and the shorter antenna cable connects to the front antenna terminal.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –13 5. 6 M u l t i B a y D ev i c e 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. T urn the notebook upside down, with the left side to ward you. 3. Slide and hold the MultiBay release latch to the right 1 .
5–14 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5 .7 Bluetoot h Wir eless Com mun icat io n s Bo ar d 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. T urn the notebook upside down, with the right side to ward you.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –15 6. Remov e the two PM1.5×3.0 scre ws 1 that secure the Bluetooth board to the Bluetooth cov er . 7. Remov e the board 2 from the co ver . ✎ The Bluetooth cov er is included in the Miscellaneous Plastics Kit, spare part number 353393-001.
5–16 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5. 8 Ke y b o a r d 1. Prepare the notebook for disassembly ( Section 5.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –17 3. Remov e the tw o T8M2.5×9.0 scre ws that secure the ke yboard to the notebook. R emo v ing the K e y boar d Sc r e ws 4. T urn the notebook right-side up, with the front tow ard you.
5–18 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 6. Slide the 4 tabs on the top edge of the ke yboard to w ard you. R eleasing the K e y boar d L atc hes 7. Lift the rear edge of the ke yboard up and swing it to ward you until it rests on the palm rest.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –19 8. Release the ZIF connector 1 to which the ke yboard cable is attached and disconnect the cable 2 . Disconnec ting the K e yboar d Cable Re v erse the abov e procedure to install the ke yboard.
5–20 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5. 9 Sw i t c h C ove r 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the ke yboard ( Section 5.8 ). 3. Close the notebook. 4. T urn the notebook upside down, with the rear panel to ward you.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –21 7. Open the notebook. 8. Using a flat-bladed tool, lift up the left 1 and right 2 ends of the switch cov er to disengage it from the notebook. 9. Remov e the switch co ver 3 .
5–2 2 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5. 1 0 M o d e m B o a r d 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Release the ke yboard ( Section 5.8 ). 3. Remov e the switch co ver ( Section 5.9 ).
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–2 3 6. T urn the modem board 1 ov er and disconnect the modem cable 2 from the modem board. 7. Remov e the modem board. R emo v ing the Modem Boar d Re v erse the abov e procedure to install the modem board.
5–2 4 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5. 1 1 M e m o r y M o d u l e 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the ke yboard ( Section 5.8 ). 3. Press in on the latch to release the memory shield and lift the left side of the memory shield 1 until it rests at a 45-degree angle.
R emo v al and R eplacement Pr ocedure s Maintenance and S ervi ce Guide 5–2 5 5. Spread the retaining tabs 1 that secure the memory module to the socket. The module rises up. 6. Pull the module 2 aw ay from the socket at a 45-de gree angle. R emo v ing a Memo r y Module Re v erse the abov e procedure to install a memory module.
5–2 6 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5. 1 2 K e y b o a r d Pl a t e ✎ The ke yboard plate is included in the Miscellaneous Plastics Kit, spare part number 353393-001. 1. Prepare the notebook for disassembly ( Section 5.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–2 7 5. 1 3 Fa n A s s e m b l y 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Remov e the ke yboard ( Section 5.8 ). 3. Remov e the switch co ver ( Section 5.9 ).
5–2 8 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 7. T urn the notebook right-side up and open it. 8. Disconnect the fan cable 1 from the system board. 9. Remov e the PM2.5×7.0 scre w 2 that secures the f an assembly to the notebook.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–2 9 10. Lift the left side of the fan assembly 1 until it rests at an angle. 11. Slide the fan assembly up and to the left 2 to remo ve it from the notebook. R emo v ing the F an Assembl y Re v erse the abov e procedure to install the fan assembly .
5–30 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 5 . 1 4 H eat Sink 1. Prepare the notebook for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ K e yboard ( Section 5.8 ) ❏ Switch cov er ( Section 5.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –31 3. Lift the left side of the heat sink 1 up until the thermal grease bond between the heat sink and the processor disengages. 4. Slide the cooling f ins 2 forward until the y clear the top co ver .
5–3 2 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es ✎ Carefully clean any thermal grease residue from the underside of the heat sink 1 and processor surfaces 2 each time you remov e the heat sink. Then apply ne w thermal grease to both surfaces.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–3 3 5. 1 5 P r o c e s s o r 1. Prepare the notebook for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ K e yboard ( Section 5.8 ) ❏ Switch cov er ( Section 5.
5–3 4 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 2. Use a flat-bladed scre wdri v er to turn the processor lock scre w 1 one-quarter turn counterclockwise to release the processor from the socket. 3. Lift the processor 2 straight up to remov e it.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–3 5 5 . 1 6 Di spla y Assem bl y 1. Prepare the notebook for disassembly ( Section 5.3 ). 2. Disconnect the wireless antenna cables from the Mini PCI communications board ( Section 5.
5–3 6 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 4. Disconnect the display cable 1 from the system board. 5. Remov e the left and right wireless antenna cables from the groov e 2 in the top cov er . 6. Carefully work the wireless antenna cables 3 up through the hole in the system board from the Mini PCI compartment.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–3 7 7. Close the notebook. 8. T urn the notebook upside down, with the rear panel to ward you. 9. Remov e the follo wing scre ws: ❏ T wo T8M2.5×9.0 scre ws 1 from the rear panel.
5–3 8 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 10. T urn the notebook right-side up, with the front tow ard you. 11. Open the notebook until the display assembly is in an upright position. 12. Lift the display assembly 1 straight up to remov e it.
R emo v al and R eplacement Pr ocedure s Maintenance and S ervi ce Guide 5–3 9 5. 1 7 T o p C ove r 1. Prepare the notebook for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ MultiBay de vice ( Section 5.6 ) ❏ K e yboard ( Section 5.
5–40 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 3. Remov e the follo wing scre ws: ❏ T en T8M2.5×9.0 screws 1 along the front edge, sides, rear corners and center of the bottom of the notebook. ❏ Three T8M2.5x3.0 scre ws 2 from the MultiBay .
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –41 4. T urn the notebook right-side up, with the front tow ard you. 5. Release the ZIF connector 1 to which the T ouchPad cable is attached and disconnect the T ouchPad cable 2 .
5–4 2 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 7. Lift the right side 1 of the top cov er until it rests at a 45-degree angle. 8. Slide the top cov er to the left to disengage the audio connectors 2 from the top cov er .
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–4 3 5. 1 8 RTC B a t t e r y ✎ The R TC battery is included in the Miscellaneous Plastics Kit, spare part number 353393-001. 1. Prepare the notebook for disassembly ( Section 5.
5–44 Maintenance and Serv ice Gui de R emo val and R eplaceme nt Pr ocedur es 3. Lift the R TC battery out of the top co ver clip. R emo v ing the R T C Battery Re v erse the abov e procedure to install the R TC battery .
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–4 5 5. 1 9 S p e a k e r s ✎ The speakers are included in the Miscellaneous Plastics Kit, spare part number 353393-001 and with the base enclosure, spare part number 353388-001.
5–4 6 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 3. Release the ZIF connector 1 on the system board to which the LED board cable is attach ed and disconnect the cable 2 . 4. Lift up the tape 3 that holds the LED board connector cable to the speaker .
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–4 7 6. Remov e the PM1.5x4.0 scre w 1 that secures the speake r assembly to the base enclosure.
5–4 8 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5 .20 LED Board 1. Prepare the notebook for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ K e yboard ( Section 5.8 ) ❏ Memory shield ( Section 5.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5–4 9 3. Release the ZIF connector 1 on the system board to which the LED board cable is attached, and then disconnect the cable 2 . 4. Remov e the PM1.5x4.0 scre w 3 that secures the LED board to the base enclosure.
5–5 0 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5 .2 1 Bottom Bo ar d 1. Prepare the notebook for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ K e yboard ( Section 5.8 ) ❏ Switch cov er ( Section 5.
R emo v al and R eplacement Pr ocedure s Maintenance and S erv ice Guide 5 –51 3. Remov e the two PM2.5×5.0 scre ws 1 that secure the bottom board to the notebook. 4. Lift the front and rear edges of the bottom board to disconnect it from the system board 2 .
5–5 2 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5. 22 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo wing components are remov ed or di.
R emo v al and R eplacement Pr ocedure s Maintenance and S ervi ce Guide 5–5 3 ❏ Display assembly ( Section 5.16 ) ❏ To p c o v e r ( Section 5.17 ) ❏ Speaker assembly cable ( Section 5.19 ) ❏ LED board ( Section 5.20 ) ❏ Bottom board ( Section 5.
5–5 4 Maintenance and Serv ic e Guide R emo val and R eplaceme nt Pr ocedur es 5. Lift the front edge of the system board 1 until it rests at an angle. 6. Slide the system board to ward you at an angle 2 , and then lift it straight up to remov e it.
Maintenance and S ervi ce Guide 6–1 6 Spec ifica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Notebook Dimensions Height Width Depth 3.
6–2 Mainte nance and Serv ice Gui de Spe cifica tion s Stand-alone power requirements Nominal operating vo l ta g e P e ak operating po wer 14.4 V dc (8-cell batter y) 10.
Spe cifica tion s Maintenance and S ervi ce Guide 6–3 Ta b l e 6 - 2 14.1-inch XGA TFT Displa y Dimensions Height Width Diagonal 28.6 cm 21.4 cm 35.7 cm 11.2 in 8.4 in 14.1 in Number of colors 16M Contrast ratio 250:1 typical Refresh rate 60 Hz Brightness 150 nits typical (min) Pixel resolution Pitch Fo r m a t Configuration 0.
6–4 Mainte nance and Serv ice Gui de Spe cifica tion s Ta b l e 6 - 3 15.0-inch XGA TFT Displa y Dimensions Height Width Diagonal 30.4 cm 22.8 cm 35.7 cm 11.8 in 9.0 in 15.0 in Number of colors 16M Contrast ratio 250:1 typical Refresh rate 60 Hz Brightness 150 nits typical (min) Pixel resolution Pitch Fo r m a t Configuration 0.
Spe cifica tion s Maintenance and S ervi ce Guide 6–5 Ta b l e 6 - 4 15.0-inch SXGA+WV A TFT Display Dimensions Height Width Diagonal 30.4 cm 22.8 cm 35.7 cm 11.8 in 9.0 in 15.0 in Number of colors 16M Contrast ratio 250:1 typical Refresh rate 60 Hz Brightness 150 nits typical (min) Pixel resolution Pitch Fo r m a t Configuration 0.
6–6 Mainte nance and Serv ice Gui de Spe cifica tion s Ta b l e 6 - 5 Har d Drives 60-GB 60-GB 40-GB 40-GB 30-GB User capacity per drive 1 60 GB 60 GB 40 GB 40 GB 30 GB Dimensions Height Width We i g h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 102 g 9.5 mm 70 mm 102 g 9.
Spe cifica tion s Maintenance and S ervi ce Guide 6–7 Ta b l e 6 - 6 External A C Adapter W eight Adapter P ower cord 0.29 kg 0.13 kg 0.65 lb 0.29 lb P o wer supply Operating v oltage Operating current Operating frequency range Maximum transient 90 to 264 V A C RMS 1.
6–8 Mainte nance and Serv ice Gui de Spe cifica tion s Ta b l e 6 - 8 Optional High-Capacity 8-Cell, Li-Ion Battery Pa ck Dimensions Height Width Depth We i g h t 1.90 cm 7.60 cm 14.70 cm 0.43 kg 0.75 in 3.00 in 5.80 in 0.94 lb Energ y V oltage Amp-hour capacity W att-hour capacity 14.
Spe cifica tion s Maintenance and S ervi ce Guide 6–9 T able 6-10 24X Max D VD+R W/R and CD-R W Combo Drive Applicable disc Read: DV D - R DV D - R W D VD-RO M (D VD-5, D VD-9, D VD-10, DV D - 1 8 ).
6–10 Maintenance and Se r v i ce Guide Spe cifica tion s Data transfer rate CD-R (16X) CD-R W (8X) CD-R OM (24X) DV D ( 8 X ) D VD-R (4X) DV D - R W ( 2 X ) Multiword DMA mode 2 2,400 KB/s (150 KB/s.
Spe cifica tion s Maintenance and S erv ice Guide 6 –11 T able 6-11 24X Max D VD/CD-R W Combo Drive Applicable disc Read: DV D - R DV D - R W D VD-RO M (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) CD-R OM.
6–12 Maintenance and Se r v i ce Guide Spe cifica tion s Data transfer rate CD-R (24X) CD-R W (10X) CD-R OM (24X) DV D ( 8 X ) Multiword DMA mode 2 3,600 KB/s (150 KB/s at 1X CD rate) 1,500 KB/s (150 KB/s at 1X CD rate) 3,600 KB/s (150 KB/s at 1X CD rate) 10,800 KB/s (1352 KB/s at 1X D VD rate) 16.
Spe cifica tion s Maintenance and S erv ice Guide 6 –13 T able 6-12 8X/24X D VD-R OM Drive Applicable disc Read: D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) CD-R OM (Mode 1 and 2) CD Digital A u.
6–14 Maintenance and Se r v i ce Guide Spe cifica tion s Data transfer rate CD-R (24X) CD-R W (10X) CD-R OM (24X) DV D ( 8 X ) Multiword DMA mode 2 3,600 KB/s (150KB/s at 1X CD rate) 1,500 KB/s (150KB/s at 1X CD rate) 3,600 KB/s (150 KB/s at 1X CD rate) 10,800 KB/s (1352 KB/s at 1X D VD rate) 16.
Spe cifica tion s Maintenance and S erv ice Guide 6 –15 T able 6-13 24X CD-R OM Drive Applicable disc CD-R OM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F or m 1 and 2) CD-I ready (Mode 2, F or m 1 and 2) CD-R CD-R W Photo CD (single/multisession) CD-Bridge Center hole diameter 1.
6–16 Maintenance and Se r v i ce Guide Spe cifica tion s T able 6-14 System DMA Har dware DMA System Function DMA1 A v ailabl e f or parallel DMA2 Floppy Disk Controller DMA3 F ast Infr ared por t D.
Spe cifica tion s Maintenance and S erv ice Guide 6 –17 T able 6-15 System Interrupts Har dware IRQ System Function IRQ0 System timer IRQ1 Ke yboard controller IRQ2 Cascaded IRQ3 Infrared IRQ4 COM1 .
6–18 Maintenance and Se r v i ce Guide Spe cifica tion s T able 6-16 System I/O Addresses I/O Address (he x) System Function (shipping configuration) 000 - CF7 DMA controller ; PCI bus 010 - 01F Mot.
Spe cifica tion s Maintenance and S erv ice Guide 6 –19 I/O Address (he x) System Function (shipping configuration) 0A4 - 0BD Motherboard resources 0C0 - 0DF DMA Controller 0F0 - 0FF Numeric Data Pr.
6–20 Maintenance and Se r v i ce Guide Spe cifica tion s I/O Address (he x) System Function (shipping configuration) 778 - 77A P arallel P ort (LPT1) A79 ISAPNP Read Data P or t D00 - FFFF PCI b us .
Maintenance and S ervi ce Guide A–1 A Conn ec tor P in Assi gnm ents Ta b l e A - 1 RJ-45 Netw ork Interface Pin Signal Pin Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receive – 3 Receiv e + 7.
A–2 Mainte nance and Serv ice Gui de Connec tor P in Assignments Ta b l e A - 2 RJ-11 Modem Pin Signal Pin Signal 1 Unused 4 Unused 2T i p 5U n u s e d 3 Ring 6 Unused Ta b l e A - 3 Universal Seria.
Connec tor P in Assignments Maintenance and S ervi ce Guide A–3 Ta b l e A - 4 S-Video Pin Signal Pin Signal 1 Ground (Y) 3 Y -Luminance (Intensity) 2 Ground (C) 4 C-Chrominance (Color) Ta b l e A -.
A–4 Mainte nance and Serv ice Gui de Connec tor P in Assignments Ta b l e A - 6 Headphone Jac k Pin Signal Pin Signal 1 Ground 2 Left audio signal 3 Right audio signal Ta b l e A - 7 Micr ophone Pin.
Connec tor P in Assignments Maintenance and S ervi ce Guide A–5 Ta b l e A - 8 P arallel Pin Signal Pin Signal 1 Strobe 14 A uto linef eed 2 Data bit 0 15 Error 3 Data bit 1 16 Initialize paper 4 Da.
A–6 Mainte nance and Serv ice Gui de Connec tor P in Assignments Ta b l e A - 9 Serial Pin Signal Pin Signal 1 Carrier detect 6 Data set ready 2 Receive data 7 Ready to send 3 T ransmit data 8 Clear.
Maintenance and S ervi ce Guide B–1 B P o w er Cord Set Req uirements 3-Con duc tor P o w er Cord Set The wide range input feature of the notebook permits it to operate from any line v oltage from 100 to 120 or 220 to 240 v olts A C.
Maintenance and S ervi ce Guide C–1 C Sc r e w L ist ing This appendix provides specif ication and reference information for the scre ws used in the notebook. All scre ws listed in this appendix are a v ailable in the Miscellaneous Scre w Kit, spare part number 353394-001.
C–2 Maintenance and S ervi ce Guide Scr e w Listin g T orx T5M3 . 0x4. 0 Hard Dr i ve F rame L ocati ons Ta b l e C - 1 T orx T5M3.0×4.0 Screw Color Qty . Length Thread Head Width Silv er 2 4.0 mm 3.0 mm 5.0 mm Where used: T wo scre ws that secure the hard drive frame to the hard driv e (documented in Section 5.
Scr e w Listin g Maintenance and S ervi ce Guide C–3 Phillips P M3 . 0x3 .5 Har d Dr i v e F rame S cr ew L ocati ons Ta b l e C - 2 Phillips PM3.0×3.5 Screw Color Qty . Length Thread Head Width Silv er 2 3.5 mm 3.0 mm 5.0 mm Where used: T wo scre ws that secure the hard drive frame to the hard driv e (documented in Section 5.
C–4 Maintenance and S ervi ce Guide Scr e w Listin g He x M2 . 0×10. 0 Har d Dr i v e A lignmen t P in L ocati ons Ta b l e C - 3 Hex M2.0×10.0 Alignment Pin Color Qty .
Scr e w Listin g Maintenance and S ervi ce Guide C–5 Phill ips P M2 .5×3 . 0 Scr ew Location Ta b l e C - 4 Phillips PM2.5×3.0 Screw Color Qty . Length Thread Head Width Blac k 1 3.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the hard dr iv e to the notebook (documented in Section 5.
C–6 Maintenance and S ervi ce Guide Scr e w Listin g T or x T 8 M 2.5× 5.0 Fa n A s s em b ly S c rew Lo c a t i o n Ta b l e C - 5 T orx T8M2.5×5.0 Screw Color Qty . Length Thread Head Width Blac k 7 5.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the f an assembly to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S ervi ce Guide C–7 T or x T 8 M 2 .5 × 5.0 H e a t S i n k S crew Lo c a t io n s Ta b l e C - 5 T orx T8M2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Blac k 7 5.0 mm 2.5 mm 4.0 mm Where used: F our scre ws that secure the heat sink to the notebook (documented in Section 5.
C–8 Maintenance and S ervi ce Guide Scr e w Listin g T or x T 8 M 2.5× 5.0 T o p C ove r S crew L o c a t i on s Ta b l e C - 5 T orx T8M2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Blac k 7 5.0 mm 2.5 mm 4.0 mm Where used: T wo scre ws that secure the top cov er to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S ervi ce Guide C–9 Phillips P M2 . 0×4. 0 Bottom Boar d Sc r e w Locati ons Ta b l e C - 6 Phillips PM2.0x4.0 Screws Color Qty . Length Thread Head Width Blac k 9 4.0 mm 2.0 mm 4.0 mm Where used: T wo scre ws that secure the bo ttom board to the notebook (documented in Section 5.
C–10 Maintenance and S ervi ce Gui de Scr e w Listin g Phillips P M2 . 0x4. 0 S yst em Boar d Sc r e w L ocati ons Ta b l e C - 6 Phillips PM2.0x4.0 Screws (Continued) Color Qty . Length Thread Head Width Blac k 9 4.0 mm 2.0 mm 4.0 mm Where used: Six scre ws that secure the system board to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S erv ice Guide C –11 Phillips P M2 . 0x4. 0 Har d Dr i v e C o v er Sc r e w L ocati on Ta b l e C - 6 Phillips PM2.0x4.0 Screws (Continued) Color Qty . Length Thread Head Width Blac k 9 4.0 mm 2.0 mm 4.0 mm Where used: One screw that secures the hard driv e cov er to the notebook (documented in Section 5.
C–12 Maintenance and S ervi ce Gui de Scr e w Listin g Phillips P M2 . 0×3 . 0 Modem Boar d Scr ew L ocati ons Ta b l e C - 7 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Blac k 2 3.0 mm 2.0 mm 4.0 mm Where used: T wo scre ws that secure the modem board to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S erv ice Guide C –13 Phillips P M1.5×3 . 0 Bluetooth C o v er Sc r e w L ocati ons Ta b l e C - 8 Phillips PM1.5×3.0 Screw Color Qty . Length Thread Head Width Blac k 2 3.0 mm 1.5 mm 3.5 mm Where used: T wo scre ws that secure the Blueto oth board to the Bluetooth cov er (documented in Section 5.
C–14 Maintenance and S ervi ce Gui de Scr e w Listin g P T or x T 8 M 2 .5 × 9 .0 K eyb o a rd A c c e s s Sc rew Lo c a t i o n s Ta b l e C - 9 T orx T8M2.5×9.0 Screw Color Qty . Length Thread Head Width Silv er 2 9.0 mm 2.5 mm 5.0 mm Where used: T wo scre ws that secure the ke yboard to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S erv ice Guide C –15 T or x T 8 M 2 .5 × 9 .0 Swi t ch C ove r S crew Lo c a t io n s T able C-10 T orx T8M2.5×9.0 Screw Color Qty . Length Thread Head Width Blac k 16 9.0 mm 2.5 mm 5.0 mm Where used: T wo scre ws that secure the s witch cov er to the notebook (documented in Section 5.
C–16 Maintenance and S ervi ce Gui de Scr e w Listin g T or x T 8 M 2 .5 × 9 .0 D i s p l ay A ss e m b l y Sc rew Lo c a t i o n s T able C-10 T orx T8M2.
Scr e w Listin g Maintenance and S erv ice Guide C –17 To r x T 8 M 2. 5 × 9 .0 To p C o v e r S c r e w L o c a t i o n s T able C-10 T orx T8M2.5×9.0 Screw (Continued) Color Qty . Length Thread Head Width Blac k 16 9.0 mm 2.5 mm 5.0 mm Where used: T en screws that secure the top co v er to the notebook (documented in Section 5.
C–18 Maintenance and S ervi ce Gui de Scr e w Listin g T or x T 8 M 2 .5 × 6.0 Fa n A s se m b l y Sc rew Lo c a t i o n T able C-11 Phillips PM2.5×6.0 Screw Color Qty . Length Thread Head Width Blac k 1 6.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the f an assembly to the notebook (documented in Section 5.
Scr e w Listin g Maintenance and S erv ice Guide C –19 Phillips M2 . 5×3 .0 T op Co v er Sc r ew L ocati ons T able C-12 Phillips M2.5×3.0 Screw Color Qty .
C–20 Maintenance and S ervi ce Gui de Scr e w Listin g Phillips P M1.5x4. 0 Speak er Ass embl y Sc r e w L ocati on T able C-13 Phillips PM1.5x4.0 Screw Color Qty . Length Thread Head Width Blac k 2 4.0 mm 1.5 mm Where used: One screw that secures speak er assemb ly to the base enclosure (documented in Section 5.
Scr e w Listin g Maintenance and S erv ice Guide C –21 Phillips P M1.5x4. 0 LED Board Sc r e w Locatio n T able C-13 Phillips PM1.5x4.0 Screw (Continued) Color Qty . Length Thread Head Width Blac k 2 4.0 mm 1.5 mm Where used: One screw that secures the LED board to the base enclosure (documented in Section 5.
C–2 2 Maintenance and S ervi ce Gui de Scr e w Listin g Phillips P M2 .5×11. 0 H ar d Dr i v e C onnecto r Sc r e w L ocatio n T able C-14 Phillips PM2.5x11.0 Screw Color Qty . Length Thread Head Width Blac k 1 11.0 mm 2.5 mm 5.0 mm Where used: One screw that secures the hard dr ive connector to the system board (documented in Section 5.
Scr e w Listin g Maintenance and S ervi ce Guide C–2 3 He x M2 . 5×9 . 0 S y stem Boar d S tandoff L ocati ons T able C-15 Hex M2.5×9.0 Standoffs Color Qty . Length Thread Head Width Silv er 2 9.0 mm 2.5 mm Where used: T wo standoffs that secure the system board to the notebook (documented in Section 5.
Maintenance and S ervi ce Guide Inde x–1 In de x 1394 connector 1–40 353393-001 5–11 A AC adapter spare part number 3–13 specifications 6–7 audio troubleshooting 2–26 B battery bay, locati.
Inde x–2 Mainte nance and Servi ce Gui de Inde x components bottom 1–48 front 1–37 keyboard 1–41 , 1–42 left-side 1–37 rear panel 1–39 right-side 1–39 top 1–44 Computer Setup Advance.
Inde x Maintenance and S ervi ce Guide Inde x–3 DVD+RW/R and CD-RW Combo Drive spare part number 3–7 , 3–12 specifications 6–9 DVD/CD-RW Combo Drive spare part number 3–7 , 3–12 specificat.
Inde x–4 Mainte nance and Servi ce Gui de Inde x G grounding equipment and methods 4–6 H hard drive disassembly 5–9 illustrated 3–4 , 3–6 OS loading problems 2–21 removal 5–7 spare part .
Inde x Maintenance and S ervi ce Guide Inde x–5 Mini PCI communications board removal 5–11 spare part numbers 3–7 , 5–11 Mini PCI compartment cover illustrated 3–2 , 3–10 removal 5–11 Mi.
Inde x–6 Mainte nance and Servi ce Gui de Inde x plastic parts 4–2 pointing device, troubleshooting 2–30 Port Replicator spare part numbers 3–13 troubleshooting 2–19 power button, location 1.
Inde x Maintenance and S ervi ce Guide Inde x–7 DVD+RW/R and CD-RW Combo Drive 6–9 DVD/CD-RW Combo Drive 6–11 DVD-ROM drive 6–13 hard drive 6–6 I/O addresses 6–18 interrupts 6–17 noteboo.
Inde x–8 Mainte nance and Servi ce Gui de Inde x W Windows applications key, location 1–43 Windows logo key, location 1–43 wireless LAN card removal 5–11 spare part numbers 3–7 , 5–11 wire.
デバイスHP Compaq nx5000 seriesの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP Compaq nx5000 seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP Compaq nx5000 seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP Compaq nx5000 seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP Compaq nx5000 seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP Compaq nx5000 seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP Compaq nx5000 seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP Compaq nx5000 seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP Compaq nx5000 seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
