HPメーカーDigital Projector VP6121の使用説明書/サービス説明書
ページ先へ移動 of 35
HP VP6100 Series Digital Pr ojector User’ s Guide.
Notice Copyright © 2004 by Hewlett-Packard. All rights reserved. No part of this publication ma y be reproduced, trans mitted, transcribed, stored in a retrieval system or translated into any languag.
T able of Contents 3 Table of Contents User’ s Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T able of Contents 4 User’ s Guid e Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 9 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduc tion 5 User’ s Gui de INTR ODUCTION Wa r n i n g T O PREVENT SHOCK, DO NO T OPEN THE CABINET . NO USER –SER- VICEABLE P AR TS IN SIDE. REFER SE R VICING T O QU ALIFIED SER VICE PERSONNEL. PLEASE READ THIS USER’S GUIDE BEFORE Y OU OPER- A TE Y OUR PROJECT OR.
Intr oduction 6 User’ s Gui de Shipping Contents The pr ojector is shipped with the cables r equir ed f or connection to stan dard PC or laptop com puters. Car efully unpack and v erify t hat you ha v e all the items sho wn belo w . If an y of these ite ms ar e missing, please contact personn el at the place of pur chas e.
Introduc tion 7 User’ s Gui de Pr ojector Description Pr ojector External contr ol panel (see next page) Audio/ Video conne ctor Pr ojection len s Audio jack Fr ont adjuster USB mouse connector IR r.
Intr oduction 8 User’ s Gui de External Contr ol P anel Po w e r T urns the pr ojector on or off. Auto Sync Automatically determines the best pic ture settin gs for cu rrent received signals. < > ^ v Menu Menu displa ys the menu sys tem and closes the m enu sy stem.
Introduc tion 9 User’ s Gui de Adjuster The pr ojector is equipped wit h 2 quick-r elease adjuster fe et. Push the buttons to adjust its tilt an gle . 1. Lift the pr ojector up and pr ess the adj uster button to r elease the adjuster . 2. The adjuster w ill dr op into p osition and be lock ed.
Intr oduction 10 User’ s Gui de Remote Contr ol Description Remote Contr ol Effectiv e Range The rem ote sensors are loc ated on the fr ont and the back of the pr ojector . It can function in a range of 30 degr ees horizontally and 30 degr ees vertically r elative to a line that is a right angle to the remote sensors.
Introduc tion 11 User’ s Gui de Replacing the Batter y Caution A void e xcessive heat and humidity . There ma y be danger of an explosion if batteries ar e incorr ectly r eplaced. Replace onl y with the same or equivale nt type r ecommended b y the manufact ure r .
Installation 12 User’ s Gui de INSTALLATION Scr een Size Place the pr ojector at the r equired distance fr om the scr een according t o the desir ed pictur e size (see the table below).
Installation 13 User’ s Gui de • VP6110, VP6111 (SV GA) screen size chart Connecting to V a rious Equipment The internal speak er is good f or a small audience. If you ha ve a larger audienc e , y ou ma y want to connect the audio sour ce directl y to a separate so und system inst ead of the project or .
Installation 14 User’ s Gui de Connecting to V arious Eq uipment It only tak es a few seconds to connect y our projector to y our desktop or notebook computer , VCR, or other systems. Ho we ver , a Mac adapter is nee ded for conne ction to Macintosh computers.
Installation 15 User’ s Gui de 4. Video d evice or VCR 5. Out put moni tor.
Operat ion 16 User’ s Gui de OPERATION Star t Up 1. Plug the pow er cor d into the pr ojector and into a wall sock et. 2. T urn on the main pow er switch. 3. Pre ss and hold PO WER to star t the unit. The back-lit PO WER k ey flashes blue and sta ys blue when the power is turned on.
Operation 17 User’ s Gui de Digital K eysto ne Cor r ection K eysto ning ref ers to the situation where the pr ojected image is noticeably wider at either the top or b ottom.
Operat ion 18 User’ s Gui de Sour ce Selection When se veral input sour ces ar e a vailable , pr ess the SO URCE k ey to mak e a selection fr om the r emote contr ol or from the menu system . Video and Audio Adjustme nts -- the Menu S ystem 1. On the pr ojector or r emote contr ol, press the Menu button.
Operation 19 User’ s Gui de Quick T ab FUNCTION DESCRIPTION Sour ce Selects pictur e sour ce . *The operation of this functi on depends on the S ource Scan setting. Ke y s t o n e Corr ects slanted edges of the image. Picture mode Adjusts pictur e for type of input.
Operat ion 20 User’ s Gui de Adjust T ab FUNCTION DESCRIPTION Brightness Brightens or dark ens the image . Contrast Sets di fference between ligh t and dark areas. Fr equency Adjusts timing relati ve to input signal. *This func tion is available only w hen the input source is PC .
Operation 21 User’ s Gui de Audio T ab FUNCTION DESCRIPTION Mute Stops audio output. Vo l u m e Changes loudness of audio Tr e b l e Changes loudness of higher fr equencies.
Operat ion 22 User’ s Gui de Setup T ab FUNCTION DESCRIPTION Languag e Selects language for menus. Use < / > k ey to sele ct the desir ed lan- guage . Po s i t i o n Adjusts the image to match the pr ojector placement. Sour ce scan Sets whether pr ojector sear ches for input signal.
Operation 23 User’ s Gui de PIP T ab These functions ar e a vailable only when the input so urce is PC and a video or S-video sour ce is also connected. FUNCTION DESCRIPTION Sour ce Selects an input source f or the pictur e-in-pictur e . Size Selects the size of the pic- tur e-in-picture.
Operat ion 24 User’ s Gui de Shutdo wn 1. Pre ss and hold PO WER and a warning message will appear . T o turn off the pr ojector , pr ess PO WER again. 2. The fan will contin ue to run for a ppr oximately tw o minutes. 3. T urn off the main pow er switch.
Maintenance 25 User’ s Gui de MAINTENANCE Lamp Information Lamp LED Indicator Lamp Replacement When the Lamp Indicat or lights up r ed or a message appears suggesting the time of lamp r eplacement, please instal l a new lamp or consult y our dealer .
Maintenance 26 User’ s Gui de 1. T urn off the pr ojector . Disconnect the pow er cord fr om the outlet and the pr ojector . 2. Loosen the scr ew and re mov e the lamp co ver . If the lamp is hot, av oid burns by waiting 45 min utes until the lamp has coole d.
Maintenance 27 User’ s Gui de T emperatur e W arning Indicator Accessories Y ou can buy HP accessories for y our pr ojector , such as the following: • Carrying case • Pr emium remote contr ol (p.
T r oubleshooting 28 User’ s Gui de T R OUBLESHOOTING Common Pr oblems & Solutions PROBLEMS TR Y THESE SOLUTIONS NO PO WER • Mak e sure t he powe r cord is inserted fully into t he pow er cord socket. • Mak e sure t he powe r cord is inserted fully into t he pow er outlet.
T r oubleshooting 29 User’ s Gui de Status Messa ges On-Scr een Messag es Description SEARCHING Pr ojector is sear ching for input. A CQUIRING SIGNAL Pr ojector has identified the input signal and is running the auto image adjustment function. OUT OF RANGE Input signal fr equency exceeds the pr ojector’ s range .
Specifications 30 User’ s Gui de SPECIFICATIONS Pr ojector Specifications T echnical Specifications Note: All specifica tions are subject to change without notice . General Model name VP6120, VP6121 (XGA) VP6110, VP6111 (SV GA) Optical Displa y system 1-CHIP DMD Lens F/Number F/2.
Specifications 31 User’ s Gui de Timing Char t Resolution H Sync (kHz) V Sync (Hz) Remark 640x350 31.5 70.1 640x400 37.9 85.1 VESA 720x400 31.5 70.0 720x400 37.9 85.1 VESA 640x480 31.5 60.0 VESA 640x480 37.9 72.8 VESA 640x480 35 66.7 Macintos h 640x480 43.
Dimensions 32 User’ s Gui de DIMENSIONS Unit: mm 307.5 307.5 242.23 242.23 109.46 109.46.
Regulator y and Safety 33 User’ s Gui de REGULATOR Y AND SAF ETY This section pr esents inf ormation that sho ws how your digital p r ojector com plies with r egulations in cer tain r egions.
Regulator y and Safety 34 User’ s Gui de to Identify and Resolve Radio-TV Interference Pr oblems . This booklet is a vailable fr om the U .S. Gove rnment Printing Office, W ashington, DC 20402, St ock Number 004-000-00345-4. At the first printing o f this manual, the telephone number was (202) 512-1800.
Regulator y and Safety 35 User’ s Guide Eur opean Union NOTE : For regulatory identification pur poses, your produ ct is assigned a Regulatory Model Number . Th e Regulatory Model Number for your product is listed in the declaration below . This regulatory number is different from the marketing name an d product number .
デバイスHP Digital Projector VP6121の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
HP Digital Projector VP6121をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP Digital Projector VP6121の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP Digital Projector VP6121の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP Digital Projector VP6121で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP Digital Projector VP6121を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP Digital Projector VP6121の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP Digital Projector VP6121に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP Digital Projector VP6121デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
