HPメーカーPROBOOK 4530Sの使用説明書/サービス説明書
ページ先へ移動 of 153
HP ProBook 4530s Notebook PC HP ProBook 4730s Notebook PC Maintenance and Service Guide.
© Copyright 2011 Hew lett-Packard Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel and Core are trademarks or registered trademarks of Intel Corporation in the United States an d other countries.
Safety warning notice WARNING! To reduce the possibility of heat-related inju ries or of ove rheating th e computer, do not place the compu ter directly on your lap or o bstruct the computer air ven ts.
iv Safety warning no tice.
Table of contents 1 Product description ............ ......... ........... ......... ......... .......... .......... ........... ........ ............ ... ............. ........ ......... .. 1 2 External component id enti fication ...... ......... ...
Grounding guidelines ................ ......... ............ ......... ........... ......... .......... ........... ......... ......... 43 Electrostatic dis charge damage ................. ........................... ...................... ...... 43 Packaging and transporting guidelines .
Determ ining the BIOS ve rsion . ............ ............... .............. ........... ................ .... 114 Downloadi ng a BIOS updat e ............ .......... ........... .......... .......... ........... ........... 114 Using System Diagnostics .
viii.
1 Product description Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) Product Name HP ProBook 4530s Notebook PC √√ HP ProBook 4730s Noteb ook PC √ Processors Intel® Core™ i7 processor, Qu ad Core 2630QM, 2.00-GHz (Turbo up to 2.90) pr ocessor 6-MB L3 cache, 8 threads √√ Intel Core i7 processor, Du al Core 2620M, 2.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) AMD Radeon™ HD 6490M, 512-MB or 1 -GB (discrete) √√ Panel All display assemblies include 2 wireless local area netwo rk (WLAN) antennas All displays are LED backlit √√√ 39.6-cm (15.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) Supports the following drives: ● 750-GB, 7200-rpm ● 500-GB, 7200-rpm ● 320-GB, 7200-rpm ● 250-GB, 7200-rpm ● 640-GB, 5400-rpm ● 500-GB, 5400-rpm ● 320-GB, 5400-rpm ● 250-GB, 5400-rpm √√√ Fixed optical drives Supports the following 12.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) Supports the following WLAN formats: ● Ralink 802.11 b/g/n 1×1 ● Realtek 802.11 b/g/n 1×1 ● Atheros 802.11 b/g/n +BT Combo ● Ralink 802.11 a/b/g/n +BT Combo ● Realtek 802.11 b/g/n +BT Combo ● Intel 802.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) 90-W √√ 65-W √ In-line cavity 8-cell, 73-Wh Li-ion battery √ L-shape 9-cell, 93-Wh Li-ion battery √√ 6-cell, 55-Wh Li-ion battery.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) Windows 7 Professional 64 with Microsoft Office 2010 Starter √√√ Windows 7 Professional 64 with Microsoft Office 2010 Personal √√.
Category Description 4530s (UMA) 4530s (Disc) 4730s (Disc) Windows 7 Professional 64 √√√ Windows 7 Professional 32 √√√ Windows 7 Home Basic 32 √√√ Windows 7 Home Premium 64 √√√.
2 External component identification Display Component Description (1) Speakers (2) Produce sou nd. (2) Internal display switch Turns off the display or initiates Sleep if the display is closed while the power is on. NOTE: The display switch is not visi ble from the outside of the computer.
Component Description (7) Webcam (select models only) Record s video and captures still photographs. To use the webcam, select Sta rt > All Programs > ArcSoft TotalMedia Suite > WebCam Compan ion . *The antennas are not visible from the outsid e of the comput er.
Lights Component Description (1) TouchPad light ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (2) Caps lock light ● White: Caps lock is on. ● Off: Caps lock is off. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state.
Buttons and fingerprint r eader (select models only) Component Description (1) Power button ● When the computer is off, p ress the button to turn on the computer. ● When the computer is on, press the b utton briefly to initiate Sleep. ● When the computer is in the Sleep state, pr ess the button briefly to exit Sleep.
Component Description (2) QuickWeb button ● When the computer is off or in Hibernation, press the button to open HP QuickWeb. ● When the computer is in Microsoft Windows, press th e button to open the default Web browser. ● When the computer is in HP QuickWeb, press the button to open the default Web browser.
Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) Function keys Execute frequently us ed system functions when p ressed in combination with the fn key. (3) num lk key Enables/disables the embedded numeric keypad when pressed in combination with the fn key.
Front Component Description (1) Drive light ● White: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive.
Left Component Description (1) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (2) AC adapter light ● White: The computer is connected to external power and the battery is 90 to 99% charged.
Component Description (8) ExpressCard slot Reads and writes to ExpressCards. (9) USB port Connects an optional USB device. (10) USB port Connects an optional USB device. Right Component Description (1) USB ports (2) Connect optional USB devices. (2) RJ-11 (modem) jack (select model s only) Connects a modem cable.
Bottom Component Description (1) Battery and access cover release latch es Release the battery from the battery bay, and the access cover from the computer. (2) B attery bay Holds the battery. (3) S IM slot Contains a wireless subscriber identity module (SIM) model 4530s only).
3 Illustrated parts catalog Service tag When ordering pa rts or requestin g information, provide the comput er serial numbe r and model description provided on the service tag. ● Product name (1) . This is the product name affix ed to the front of the computer.
Computer major components Computer majo r components 19.
Item Description Spare part number (1) Display panel For use in silver HP ProBook 4530s mod els: ● 39.6-cm (15.6-inch) HD, anti-glare, without webcam 647001-001 ● 39.6-cm (15.6-inch) HD, anti-glare, with webcam 647002-001 ● 39.6-cm (15.6-inch) HD, anti-g lare, with webcam and WWAN 647003-001 ● 39.
Item Description Spare part number (7) Modem module NOTE: The modem module spare part kit does not includ e a modem module cable. The modem module cable is included in the Cabl e Kit, spare part number 646303-0 01 for 4530s models, 646304-001 for 4730 s models.
Item Description Spare part number Intel Core i3 processors, Dual C ore 2350M, 2.3-GHz processor 3-MB L3 cach e 653340-001 2330M, 2.2-GHz processor 3-MB L3 cach e 653339-001 2310M, 2.1-GHz processor 3-MB L3 cache (inclu des thermal grease ) 638037-001 Intel Pentium processors B950, 2.
Item Description Spare part number Realtek 8188BC8 802.11a/b/g/n 2x2 WiFi and Bluetooth 3.0+HS Combo Adap ter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Arge ntina.
Item Description Spare part number Ralink 8190BC8 802.11b/g/n 2x2 WiFi and Bl uetooth 3.0+HS Combo Adapter for u se in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Arge ntina, .
Item Description Spare part number Intel Centrino® Advanced-N 6230 for use in Afghanistan, Albania, Alger ia, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia , Aruba, Australia, Austria, Aze.
Item Description Spare part number 4-GB 621569-001 2-GB 621565-001 1-GB 639736-001 (23) Hard drive 750-GB, 7200-rpm 633252-001 640-GB, 5400-rpm 603785-001 500-GB, 7200-rpm 634925-001 500-GB, 5400-rpm .
Display components Item Description Spare part number (1) Display bezel For use with HP ProBook 4530s models with a webcam 646266-001 For use with HP ProBook 4530s models without a webcam 646265-001 F.
Item Description Spare part number For use with HP ProBook 4530s models 646281-001 For use with HP ProBook 4730s models 646282-001 (3) Webcam module 642795-001 Microphone module (not illustrated) 642797-001 (4) Display panel 39.6-cm (15.6-inch) HD, anti-glare 646311-001 39.
Plastics Kit Item Description Spare part number Plastics Kit for use in 4530s models 646309-00 1 Plastics Kit for use in 4730s models 646310-00 1 (1) RJ-11 protective insert (2) Secure Digital card pr.
Cable Kit Item Description Spare part number Cable Kit for use in 453 0s models 646303-001 Cable Kit for use in 473 0s models 646304-001 (1) Battery connector cable (2) Power connector cable (3) RJ-11.
Description Spare part number 250-GB, 7200-rpm 635225-001 250-GB, 5400-rpm 622641-001 Hard Drive Hardware Kit (includes hard drive bracket, insula tor, and screws) 647944-001 Miscellaneous parts Descr.
Description Spare part nu mber For use with model 4530s 646305-001 For use with model 4730s 646306-001 Sequential part number listing Spare part number Description 449137-001 RTC battery 490371-001 Po.
Spare part number Description 593127-001 Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, An tigua and Barbuda,.
Spare part number Description 622641-001 250-GB, 5400-rpm hard drive 622643-001 320-GB, 5400-rpm hard drive 628824-001 Modem module NOTE: The modem module spare part kit does not in clude a modem module cable. The modem mo dule cable is included in the Cable Kit, spare part nu mber 646303-001 for 4530s models, 646304-001 for 4730s models.
Spare part number Description 631255-001 Intel Core i7 processor, 2540M, 2.6-GHz (turbo up to 3.3-GHz) p rocessor, 3-MB L3 cache (includes thermal material) 632155-001 HP lc2010 HSPA Mobile Broadband Module 633252-001 750-GB, 7200-rpm hard drive 633805-001 6-cell, 47 WHr, 2.
Spare part number Description 640926-001 Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola , Antigua and Barbuda, Argentina, Armenia, Aruba, Au stra.
Spare part number Description 646274-001 Display Cable Kit for use in 4730s HD+ models 646275-001 Webcam cable 646276-001 WLAN antennas for use in 4530s models 646277-001 WLAN antennas for use in 4730.
Spare part number Description 646300-141 Keyboard for use in Turkey 646300-161 Keyboard for use in Latin America 646300-171 Keyboard for use in Saudi Arabia 646300-211 Keyboard for use Hungary 646300-.
Spare part number Description 647001-001 39.6-cm (15.6-inch) display assembly, HD, ant i-glare, without webcam, for use in 4530s models 647002-001 39.6-cm (15.6-inch) display assembly, HD, anti- glare, with webcam, for use in 4530s models 647003-001 39.
Spare part number Description 658340-001 System board for use in 4530s models with UMA graphics with WWAN and USB 2.0 in all countries and regions except for Russia and the People's Re public of China 658341-001 System board for use in 4530s models with UMA graphics withou t WWAN and with USB 2.
4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw .
Cables and connectors CAUTION: When servicing the computer, be sure that c ables are placed in their prop er locations during the reassembly p rocess. Improp er cable placem ent can damage th e computer. Cables must be handle d with extreme care to avo id damage.
Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrost atic discharge (ESD). Circuitry design and st ructure determine the deg ree of sensitiv ity.
Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts an d assemblies wi th conductive or approv ed containe rs or packaging.
Equipment guidelines Grounding equi pment must include eith er a wrist strap o r a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resi stance in the ground cords.
Component replacement procedures This chapter provides removal an d replacement proced ures. There are as many as 95 screws and screw locks, in 15 different sizes, that must be removed, replaced, or loosened when servicing the computer . Make special note of each screw and screw lock size and location du ring removal and repl acement.
Battery Description Spare part num ber 9-cell, 93 WHr, 2.8 Ah Li-ion battery , for use only in 4530s models 633809-001 8-cell, 73 WHr, 2.8 Ah Li-ion battery , for use only in 4730s models 633807-001 6-cell, 55 WHr, 2.8 Ah, for use only in 4530s mode ls 650938-001 6-cell, 47 WHr, 2.
SIM NOTE: This section applies only to co mputer models with WWAN capability. NOTE: If there is a SIM inserted in th e SIM slot, it must be remove d before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembli ng the computer.
Bottom door Description Spare part num ber Bottom door for use in 4530s models 646263-001 Bottom door for use in 4730s models 646264-001 Before disa ssembling the co mputer, follow these steps: 1.
Optical drive NOTE: All optical drive spare part kits include an optical d rive bezel. Description Spare part num ber For use in 4530s mo dels: Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive 647951-001 B.
4. Remove the optical drive (3) from the computer. 5. If it is necessary to replace the optical drive bracket, position the optica l drive with the rear toward y ou. 6. Remove the two Phillips PM2.0×3.0 screws (1) th at secure the optical drive bracket to th e optical drive.
Hard dr ive NOTE: All hard drive spare part kits incl ude a hard drive bracket and screws. Description Spare part num ber 750-GB, 7200-rpm hard drive 633252-001 640-GB, 5400-rpm hard drive 603785-001 .
4. Remove the ha rd drive (3) from the hard drive bay. 5. If it is necessary to re place the hard drive bracket, re move the tape (1) that secures the Mylar cover down onto the bracket, and then lift to open the Myla r cover (2) . 6. Remove the two Phillips PM3.
Memory modules NOTE: Primary and expansion memory is insta lled in a stacke d configuration in the bo ttom of the computer. Description Spare part num ber 1-GB (PC3-10600, 13 33-MHz, DDR3) 639736-001 2-GB (PC3-10600, 13 33-MHz, DDR3) 621565-001 4-GB (PC3-10600, 13 33-MHz, DDR3) 621569-001 Before removing the memory module, follo w these step s: 1.
3. Remove the memory module (2) by pul ling the module a way from the slot at an angle. NOTE: Memory modules a re designed with a n otch (3) to prevent incorrect insertion into the memory module slot. NOTE: The computer uses tw o memory sockets . The top socket hou ses the expans ion memory module and is show n in the following image.
WWAN module CAUTION: The WWAN module and the WL AN module are not in terchangeable . Description Spare part num ber HP lc2010 HSPA Mobile Broadband Module 63215 5-001 HP un2430 EV-DO/HSPA Mobile Broadband Mo dule 634400-001 Before removing the WWAN module, follow these steps: 1.
4. Remove the WWAN module (3) by pulling the module away from the slo t at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect inse rtion.
WLAN/Bluetooth combo card The computer uses a card that provides both WLAN and Blu etooth functionality. CAUTION: The WLAN module and the WWAN module are not inte rchangeable. Description Spare part num ber Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.
Description Spare part num ber Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Arub a, Australia, Austria.
Description Spare part num ber Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Alba nia, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Arub a, Australia, Austr.
3. Disconnect th e power from the c omputer by first unplugging the power cord from the AC ou tlet, and then unpl ugging the AC adap ter from the comput er. 4. Remove the batt ery (see Battery on page 47 ). 5. Remove the bottom door (see Bottom door on pa ge 49 ).
4. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN module s are designed with a no tch (4) to prevent incorrect insertion.
Keyboard NOTE: For a detailed list o f available keyb oards, see Sequential part number listing on page 32 . Description Spare part num ber Keyboard 646300-xxx Before removing the keyboard, fo llow these steps: 1.
4. Insert a screwdriver or similar tool into the gap near the WWAN module comp artment and push to disengage the keyboard. 5. Position the compute r uprigh t with the fron t toward you. 6. Open the compute r as far as possible. 7. Lift and rotate the keyboa rd (1) until it rests on the palm rest (2) .
10. Remove the keyboard (3) . Reverse this procedure to insta ll the keyboard. Top cover Description Spare part num ber Top cover for use in mo del 4530s: With a fingerprint reader and USB 3.0 646251-001 Without a fingerprint reader and w ith USB 3.0 646253-001 With a fingerprint reader and USB 2.
4. Remove the batt ery (see Battery on page 47 ). 5. Remove the following compo nents: a. Bottom door (see Bottom do or on page 49 ). b. Optical drive (see Optical drive on page 50 ) c. Keyboard (see Keyboard on page 63 ) Remove th e top cov er: 1. Position the computer upside-down with the front toward you.
3. Remove the following scre ws that se cure the top cover to the computer: (1) 3 Phillips PM2.0×4.0 screws from the optical drive bay (2) 3 Phillips PM2.5×2.5 b roadhead screws from the battery ba y NOTE: The following i mage shows model 45 30s. Model 4730 s has 5 screws in th e battery bay 4.
7. Position the compute r on its side with the display open. 8. Insert a screwdriver through th e holes in the b a ttery bay and pre ss to disengage the top cover from the c omputer.
10. To remove the top cover, pull up on the top of the top cover (1) , pull upward on the left (2) and right sides (3) , and then lift the bott om of the top cover (4) to remove it enough to access the card reader ca ble undernea th. 11. Lift the front of the top co ver slightly to gain access to the cable and connector underneath.
Card reader board Description Spare part num ber Card reader board for use in 4530s models 646292-00 1 Card reader board for use in 4730s models 646293-00 1 Before removing the card reader, follo w these steps: 1.
5. Rotate the Tou chpad button bo ard upward (4) , and then remove it (5) . Reverse this procedure to insta ll the card reader. Speaker assembly Description Spare part num ber Speaker assembly for use.
NOTE: The following image shows mo del 4530s. Speake r appearance diffe rs in mode l 4730s. 1. Position the top cove r upside-down with the front toward you. 2. If disassembling model 45 30s, remove the power button board cable from atop the left speaker (1) .
Quick Launch board Description Spare part num ber Quick Launch board for use in 4530s models 646296-001 Quick Launch board for use in 4730s models 646297-001 Before removing the Quick Lau nch board, follo w these steps: 1.
4. Lift the side of th e board (3) , slide it out from u nder the tab, and then remove the board from the top cove r (4) . Reverse this procedure to in stall the Qu ick Launch board.
NOTE: Model 4530s shown belo w. Power button boa rd a ppearance differs in mo del 4730s. 1. Position the top cove r upside-down with the front toward you. 2. Remove the Phillips PM2.0×4.0 screw (1) that secures the board to the top cover. 3. Lift the boar d up at an angle (2) , and then remove it from the top cover (3) .
Modem module NOTE: The modem module spare part kit does not includ e a modem module cable. The mo dem module cable is in cluded in the Ca ble Kit, spare part numbe r 646303-001 for 4 530s models, 646304-001 for 47 30s models. See Cable Kit on page 30 for more Cable Kit spare part number information.
4. Disconnect th e modem module cable (3) from the modem module. Reverse this procedure to in stall the modem module. Component replacement procedures 77.
Lid switch Description Spare part num ber Lid switch for use in 4530s models 646289-001 Lid switch for use in 4730s models 646290-001 Before removing the lid switch, fo llow these steps: 1.
4. Lift the board from th e computer (4) . Reverse this procedure to install the lid switch. Component replacement procedures 79.
USB board Description Spare part num ber USB board for use in 4530s models 646287-001 USB board for use in 4730s models 646288-001 Before removing the USB board, follow these ste ps: 1.
5. Lift the board and cable straight up out of the computer (5) Reverse this procedure to insta ll the USB board. Component replacement procedures 81.
Optical drive connector Description Spare part num ber Optical drive connector 646286-001 Before removing the optical drive connecto r, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system.
3. Lift the optical drive co nnector from the computer (2) . Reverse this procedure to in stall the optical d rive connector. Component replacement procedures 83.
RJ-11 jack cable NOTE: The RJ-11 jack cable is include d in the Cable Kit, spare part number 646303-001 for 4530s models, 64630 4-001 for 4730s models.
4. Remove the RJ-11 jack fr om the clip built in to the base enclos ure (3) . Reverse this procedure to in stall the RJ-11 jack cabl e. System board NOTE: All system board spare part kits include replacement thermal material.
Before removing the system board, follow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system. 2. Disconnect all ext ernal devices connected to the computer.
2. Disconnect th e webcam cable (1) and the display cable (2) from the system board, and remove the cables from th e routing clip (3) . 3. If removing the system board from model 4730s, sk ip to step 6. If removing the system board from mode l 4530s, remove the two Phillips PM 2.
6. If removing the system boa rd from model 4730 s, remove the three To rx T8M2.0×5.0 screws (1) that secure the system board to the comp uter, and the two Torx T8M2.0× 5.0 screws (2) that secure the hard drive exte nsion board to the computer. 7. Lift the optical drive conn ector latch (3) , and then disconnect the optica l drive cable (4) .
Hard drive extension board (4730s models) Description Spare part num ber Hard drive extension board 64629 1-001 Before removing the hard drive ex te nsion bo ard, follow these steps: 1.
2. Pull the hard drive extension board straight off the system bo ard. Reverse this procedure to in sta ll the ha rd drive extension boa rd. 90 Chapter 4 Remova l and replacement procedures.
RTC battery Description Spare part num ber RTC battery 449137-001 Before r emoving th e RTC bat tery, foll ow these steps: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system.
3. Lift the battery from the system board (2 ) . Reverse this procedure to in stall the RTC battery. 92 Chapter 4 Remova l and replacement procedures.
Fan Description Spare part num ber Fan 646285-001 Before removing the fan, follow these step s: 1. Shut down the co mputer. If you are unsure whether th e computer is off or in Hibe rnation, turn the computer on, and th en shut it down thr ough the operating system.
4. Remove the fan fro m the system board (3) . Reverse this procedure to insta ll the fan. NOTE: To prop erly ventilate the comput er, allow at le ast a 7.6-cm (3-in) clea rance on the l eft side of the computer. The computer uses an electric fan for ventilation .
Heat sink All heat sink spare part kits in clude replace ment thermal material. Description Spare part num ber Heat sink for use in comput ers with UMA graphics 646283-001 Heat sink for use in computer s with discrete gr aphics 646284-001 Before removing the heat si nk, follow the se steps: 1.
3. Remove the heat sink from the system board (7) . 4. To remove the UMA h eat sink, in the ord er indicated, loosen the four captive Phill ips screws (1) — (4) that secure the heat sink to the system board. 5. Remove the heat sink from the system board (5) .
NOTE: For UMA models, thoroughly clean thermal mate rial from the surface of the system board (1) and heat sink (2) each time you remove the heat si nk. All heat sink and pro cessor spare part ki ts include thermal material. Reverse this procedure to insta ll the heat sink.
Description Spare part num ber 2410M, 2.3-GHz (turbo up to 2.9-GHz) processor with 3-MB L3 cache 638039-001 Intel Core i3 processors, Dual Core 2350M, 2.3-GHz processor 3-MB L3 cache 653340-001 2330M, 2.2-GHz processor 3-MB L3 cache 653339-001 2310M, 2.
Remove the proce ssor: 1. Position the computer upside-down with the front toward you. 2. Use a flat-bladed screwdriver to turn the processor locking scre w (1) one-half turn counterclockwise until you hear a cli ck. 3. Lift the processor (2) straight up and remove it.
Power cable The power cable is in cluded in the Cable Kit, spare part number 64 6303-001 for 4530s mo dels, 646304-001 for 4730s mode ls. Before removing the power cable, follow th ese steps: 1.
3. Lift the power cable assembly fro m the computer (2) . Reverse this procedure to in stall the power cable. Component replacemen t procedures 101.
Display assembly All display assemblies include WLAN antenna transceivers and cables. WWAN models include 2 WWAN antenna transceivers and cables. For a list of individual display spare parts, see Display components on page 27 . Description Spare part number For use in silver HP ProBook 4530 s models: ● 39.
3. If necessary, disconnect the webcam cable (1) and display cable (2) from the system board, and then remove the cab les from the clip (3) . Component replacemen t procedures 103.
4. Remove the four Philli ps PM2.5×7.0 screws (1) from the hinges, and then re move the display from the c omputer (2) . When installing th e display assembly, be sure that the wireless an tenna cables ar e routed and arranged properly.
5. If you need to remove the hinge covers from the d isplay hinges, pull th e hinges straight up and off the di splay to r emove the m. Display hinge covers a re available using spare part number 6 46281-001 fo r 4530s models and 646282-001 for 4730s mod els.
7. Flex the to p (3) of the bezel, the inside edges of the left an d right sides (4) , and then th e bottom (5) of the bezel until it disengages from the displa y enclosure.
9. If it is necessary to replace the webcam module (shown in th e followi ng image) or micro phone module from the display enclosure, disconnect the cabl e from the module (1) , and then gently pull the module away from the double-sided tape on th e display enclosure (2) .
12. Disconnec t the display pane l cable from the bac k of the display pan el by lifting the tape over the connector (1) , and then disconnecting the cable fro m the panel (2) . The display cable is available using spa re part number 6057 66-001 for mod els without a webcam, 646273-0 01 for 4530s HD+ mode ls, 646274-001 for 4 730s models.
14. Remove the display hin ges (2) . Display hinges are avai lable using spare part number 646279-00 1 for 4530s models and 646280-001 for 4730s mod els. 15. If you need to remo ve the WLAN or WWAN a ntennas, lift the WLAN anten na cables (1) or WWAN antenna cables (2) from the clips an d routing paths (3) built into the display enclos ure.
16. To remove the display cable (1) or webcam cable (2) from the disp lay enclosure, remove the cable from the clips (3) and routing paths in th e display enclosure. The display cable is available using spa re part number 6057 66-001 for mod els without a webcam, 646273-0 01 for 4530s HD+ m odels, 646 274-001 for 4730s models.
Component replacemen t procedures 111.
5 Computer Setup (BIOS) and System Diagnostics Using Computer Setup Computer Setup, or Basic Input/Ou tput System (BIOS), controls communication betwe en all the inpu t and output devices on the system (such as disk drive s, display, keyboard, mous e, and printer).
To exit Computer Setup menu s, choose one of the following method s: ● To exit Computer Setup menus without saving your chan ges: Click the Exit icon in the lower-left corn er of the screen, and then follow the o n-screen instructions.
Updating the BIOS Updated versions of the BIOS may be availabl e on the HP Web site . Most BIOS update s on the HP Web site are packaged in compressed files cal led SoftPaqs . Some download packa ges contain a file n amed Read me.txt, which contains information regarding installing and troubleshooting the file.
NOTE: If you connect your comp uter to a networ k, con sult the network administrator before installing any software upd ates, especially system BIOS up dates. BIOS installation procedures vary . Follow any instructions that are d isplayed on the scree n after the download is complete.
6 Specifications Computer specifications Metric U.S. Dimensions , 4530s models Length 2 5.6 cm 10.1 in Width 37.5 cm 14.8 in Height (front to rear) 2.9 to 3.6 cm 1.1 to 1.4 in Weight (equipped with optical drive, 1 DIMM, hard drive, optical drive, WLAN module, 6 cell battery) 2.
Metric U.S. Operating 125 g, 2 ms, half-sine Nonoperating 200 g, 2 ms, half-sine Random vibr ation Operating 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate Nonoperating 1.5 0 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min sweep rate NOTE: Applicable product safety standards specify thermal limits for plastic surfaces.
Metric U.S. PPI 100 Surface treatment Anti-glare or BrightView Contrast ratio 300:1 (typical) – Anti-glare 500:1 – BrightView Response time 8 ms Brightness 200 nits (typical) Viewing angle SVA Backlight LED Luminance uniformity @ 13 poin ts 1.4 (typ), 1.
43.9-cm (17.3-in), HD+ display specifications Metric U.S. Active diagonal size 43.9-cm 17.3-in Resolution 1600x900 (HD+) Active area 382.08x214.92 PPI 106 Surface treatment Anti-glare or BrightView Co.
Hard drive specifications 750-GB* 640-GB* 500-GB* 320-GB* 250-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm 70 mm 70 mm Weight 115 g 101 g 101 g 101 g 101 g Interfac.
Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD -TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD , Video CD), Multisession CD (Photo- CD, CD-EXTRA, Portfolio, CD-R, C D- RW), CD-R, CD-RW, DVD-RO M (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW.
DVD±RW and CD-RW SuperMulti DL Combo Drive specifications Applicable disc Read: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD- ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisessi.
Blu-ray Disc ROM with SuperM ulti DVD±R/RW DL Drive Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I , CD-I Bridge (Photo-CD, Video CD), Multisess.
DVD-ROM Drive specifications Applicable disc DVD-ROM (DVD-5, DVD-9, DVD-10 , DVD-18, CD-ROM (Mode 1 and 2), CD D igital Audio, CD-XA ready (Mode 2, Form 1 and Form 2), CD -I (Mode 2, Form 1 and Form 2), CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge Center hole diameter 1.
Specification information in Device Manager Device Manager allo ws you to view and control the hard ware attached to th e computer, as we ll as provides hardw are specificat ion information. You can also a dd hardware or modify devi ce configurations u sing Device Manager.
7 Backup and recovery Windows 7 ● Backing up your information ● Performing a system recovery To protect you r information, use Windows Backup and Restor e to back up individu al files and folder s.
new software and data files, yo u should continue to b ack up your system on a regular basis to maintain a reasonably current backu p. The system repair discs (select models only) are used to start up (boot) the computer and repair the operating system in case of system instability or failure.
Using the Windows recovery tools To recover informat ion you previo usly backed up: 1. Select Start > All Programs > Maintenance > Backu p and Restore . 2. Follow the on-screen instructions to recover your system settings, your computer (select models only), or your files.
3. If the HP Re covery partit io n is listed, restart the co mputer, and then press esc while the “Press the ESC key for Startup Me nu” message is displayed at the bottom of the screen. 4. Press f11 while the “Press <F11> for recovery” messag e is displayed on th e screen.
Windows Vista To protect your information, use the Backup an d Restore Center to back up individua l files and folders, back up your entire hard drive (selec t models only), or cr eate system restore points. In case of system failure, you can use the backup file s to restore the contents of yo ur computer.
To create a backup using Backup and Restore Center: NOTE: Be sure that the computer is con nected to AC power before you start the backup process. NOTE: The backup process may ta ke over an hou r, depending on file size and the sp eed of the computer.
4. Select Repair your computer . 5. Follow the on-screen instructions. NOTE: For additional information on recovering info rmation using the Wind ows tools, perfo rm a search for these topics in Hel p and Support. Using f11 recovery tools CAUTION: Using f11 complete ly erases hard dr ive conten ts and reformats the hard drive.
NOTE: This process takes several minutes. 1. If possible, bac k up all personal files. 2. Restart the computer, and then in sert the Window s Vista operating system DVD into the optical drive before the Window s operating system loads. 3. When prompted, pre ss any keyboard key.
8 Power cord set requirements The wide range input fe ature of the co mputer permits it to ope rate from any line volt age from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor powe r cord set included wi th t he computer meets the req uirements for use in the country or region where the e quipment is purchased .
Requirements for specific countries and regions Country/region Accredited a gency Applicable note numb er Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 Fr.
9 Recycling Battery When a battery has reached the end of its use ful life, do n ot dispose of the ba ttery in general household waste. Follo w the local laws a nd regulati ons in your area for computer b attery disposal. Display WARNING! The backlight contains mercury.
Perform the following ste ps to di sassemble the display assembly: 1. Remove all screw covers (1) and screws (2 ) that secure the display bezel to the display assembly. 2. Lift up and out o n the left and ri ght inside edges (1) and the top and b ottom inside edge s (2) of the display beze l until the bezel disengag es from the display assemb ly.
4. Disconnect all disp lay panel cables (1) from the display i nverter and remove the in verter (2) . 5. Remove all screws (1) that secure the display panel a ssembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure.
10. Remove the display pan el frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlig ht cover (2) and swing it outward. 13. Remove the backlight cover. 14.
15. Remove the backlight cables (1) from the clip (2) in the display panel . 16. Position the d isplay panel upside-d own. WARNING ! The backlight contains mercury. Exercise caution when removing an d handling the backlight to avoid damag ing this compon ent a nd causing exposu re to the mercury.
18. Remove the backlight from the backlight frame. 19. Disconnec t the display pa nel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display re ar panel. 21. Release the LCD panel (3) from the d isplay rear panel.
Index A AC adapter light 15 AC adapter, spare part numbers 31, 33 access cover release latches 17 antennas disconnec ting 56, 61 audio, product description 3 audio-in (microphone) jack 14 audio-out (h.
remov al 50 spare part number 26, 30, 39, 50 E electrostati c discharge 43 esc key, identifying 13 Ethernet, product description 3 ExpressCard slot insert, illustrated illustrated 29 ExpressCard slot,.
ports external monitor 15 HDMI 15 product description 4 USB 16 power button bo ard remov al 74 spare part number 20, 37, 74 power button, identifying 11 power cable removal 1 00 spare part number 100 .
USB ports, identifying 16 V vents, identifying 15, 17 W webcam 9 product description 3 spare part number 28, 36 webcam light, id entifying 8 webcam, identify ing 9 Windows 7 operating system DVD 129 W.
デバイスHP PROBOOK 4530Sの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
HP PROBOOK 4530Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHP PROBOOK 4530Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。HP PROBOOK 4530Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。HP PROBOOK 4530Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
HP PROBOOK 4530Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHP PROBOOK 4530Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、HP PROBOOK 4530Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHP PROBOOK 4530Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。