HuaweiメーカーHG530の使用説明書/サービス説明書
ページ先へ移動 of 29
HUAWEI HG530 Home Gateway User Guide.
Content s 1 W arnings and Precautions ....................................................... 1 2 Connecting the Cables and Getting St arted ........................... 4 2.1 Connecting The Cable s .....................................................
1 1 W arnings and Precautions T o use the device properly and safely , read these warnings and pr ecautions carefully and strictly observe them dur ing operation. Unless other wise specified, the term "device" refers to the device and its accessories.
2 device immediately , power it off, remove all the cables connected to it, and then contact an authorized service center . z During thunderstorms, power off the device, and then remove all th e cables connected to it to prevent it from getting damaged due to lightning strikes.
3 z Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950- 1 and it is tested and appr oved according to nati onal or local standards. Safety of Children Keep the device and its accessories out of the reach of chi ldren.
4 2 Connecting the Cables and Getting Star t ed Thank you for purchasing the HUA WEI HG530 Home Gatewa y (hereinafter referred to as the HG530). 2.1 Connecting The Cables If your telephone line is used for both the broadband net work access and a telephone connection, take the following figure as a reference for connecti ng the cables.
5 indicator stops blinking, the Power and ADSL indicators turn solid on, which indicates that the HG530 is working properl y ..
6 3 Setting the Network-Access Parameters By configuring the HG530 and your co mputer , you can choose any of the following methods to surf the Internet: z Accessing the Network Through the Embedded PPP Dial-Up Software on the HG530 z Accessing the Network Through the PPP Dial-Up Software on Y our Computer 3.
7 2) Select a PVC number, such as 1 , from the PVC drop-down combo box. 3) Enter the VPI and V CI that are prov ided b y the network operator in the VPI and VCI text boxes. 4) Select Yes from the Ac ti ve d rop-down combo box an d select Routing from the Mode drop-down combo box.
8 2. Install and configure the PPP di al- up software on your computer. The PPP dial-up software is pre-installed on certain computer operating systems.
9 4 Configuring the Wireless Network Connection If a wireless network adapter is installed on your computer , you can conn ect you computer to the HG530 through a wireless connection. The hardware installation methods and dr iver installation methods of wireless network adapters provided b y different companies vary from each other .
10 1) Right-click My Computer , and then choose Manage from the shortcut menu. 2) In the Computer Mana gement window, choose Computer Management (Local) > Serv i ces and Applications > Services .
11 5 Configuring the Device 5.1 Changing the Administrator Password Used for Logging In to the Web-Based Configuration Utility For safety reasons or to make the password easy to remember , you can change the administrator password for logi n after logging i n to the Web-based configuration utilit y .
12 5.2 Enabling or Disabling the Wireless Network Function Y ou can quickly en able or disable the wirele ss network function by pressing the WLAN button on the HG530. T o enable the wireless network function, press and hold the WLAN button for over one second, and th en release the button.
13 5.4 Changing the IP Ad dress Used for Logging In to the Web-Based Configuration Utility T o make the login IP address easy to remember , you can change the IP address after logging in to the W eb-based configuration utility . T o change the IP address, do as follows: 1.
14 After the preceding operations, the curr ent page jumps to the login page. Y ou can log in to the Web-based configuratio n utilit y by entering the default user name and password.
15 6 F AQs Can I use the terminal as a DHCP server? Y es, you can. The terminal incorporates the DHCP server software. How can I quickly restore the defaul t settings of the terminal? T o restore the .
16 1) In IP address , enter 192.168.1.100 . Ensure that this IP address is unique and not used b y other computers. 2) In Subnet mask , enter 255.255.255.0 . 3) In Default gateway , enter 192.168.1.1 . 6. Consult your network service provi der about the IP addr ess of the domain name server (DNS).
17 3) Replace telephone lines. If the ADSL indicator still blinks, contact your net work service provider . 3. Check whether the LAN indicator of the terminal is on. If the LAN indicator is off, perform further checks as follows: 1) Ensure that the network adapt er of the computer is enabled .
18 2) Restore the default settings of the terminal. If the problem persists, contact your network service provider . 7. Check whether the proxy server of t he Web bro wser is correctly configured. Take the Internet Explorer installe d on a computer that runs Windo ws XP as an example.
19 If the driver is improperly installed, install it properly . 5. Check whether the computer can receive the signals of a WLAN. T ake a computer that runs Windows XP as an example.
20 If your computer is far from your terminal, the effect s of the WLAN are affected. 4. Place your terminal and com puter in another direction. 5. Do not use your terminal to access a WLAN during thunder storms. What can I do if the WLAN of the terminal is not encrypted and the computer cannot access the WLAN? 1.
21 5. If the problem persists, restore t he default settings of the terminal. What can I do if Web pages often cannot be displayed during Web page browsing and can be displaye d after the terminal is restarted? 1. Ensure that the terminal and other devices such as telephones or fax machines are connected to the telep hone line through a splitter.
22 7 Appendix 7.1 Indicators Indicator Status Description On The HG530 is powered on. Power Off The HG530 is powered off. Blinking The HG530 is being activated . On The HG530 is activated. ADSL Off The HG530 is powered off. Blinking z The HG530 works in routing mode.
23 Indicator Status Description Blinking z The wireless network function is enab led. z Data is being transmitted through the WLAN. On z The wireless network function is enab led. z No data is being transmitted through the WL AN. WLAN Off The wireless network function is disabled.
24 Number Interface or Button Description 4 Reset You can press and hold the R eset button for over six seconds to restore the default settings of the HG530. NOTE After you restore the default settings, your customized data is lost. Therefore, use this function with caution.
25 Item Specification Entire-device power consumption < 6 W Ambient temperature for operation 0°C to 40°C (32°F to 104°F) Relative humidit y for operation 5% to 95%, non-condensing Dimensions (L × W × H) 156.4 mm × 52 mm × 124.3 mm Weight About 245 g ADSL standards z G.
26 Item Specification 802.11b 1 Mbit/s, 2 Mbit/s, 5.5 Mbit/s, 11 Mbit/s 802.11g 6 Mbit/s, 9 Mbit/s, 12 Mbit/s, 18 Mbit/s, 24 Mbit/s, 36 Mbit/s, 48 Mbit/s, 54 Mbit/s Wireless transmission rates 802.11n (with 1T1R antenna used) 6.5 Mbit/s, 13.0 Mbit/s, 13.
27 Notice Some features of the product and its a ccessories described herein rel y on the software installed, capacities and settings of local network, and may not be activated or may be limited by local n etwork operators or network service providers.
デバイスHuawei HG530の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Huawei HG530をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHuawei HG530の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Huawei HG530の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Huawei HG530で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Huawei HG530を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHuawei HG530の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Huawei HG530に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHuawei HG530デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
