HumaxメーカーCRCI-5500の使用説明書/サービス説明書
ページ先へ移動 of 42
Safety......................................................... 1 Copyright & Glossary................................. 2 Remote Control Unit .................................. 3 ~ 4 STB Connections ....................................... 5 ~ 7 Reference .
1 Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully . MAINS SUPPL Y : 190 - 250V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock.
2 • VIACCESS TM is a trademark of France T elecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V . • Irdeto is a trademark of Mindport BV . • Nagravision is a registered trademark of KUNDELSKI S.A. • Conax is a trademark of T elenor Conax AS.
3 Remote Control Unit ST ANDBY TV/SA T TV/RADIO MUTE MENU CURSOR OK P+/P- HELP EPG RCL (Recall) RS-101P NUMERIC BUTTONS INFORMA TION (RED) SOUNDTRACK (GREEN) SUBTITLE (YELLOW) UHF (BLUE) EXIT V+/V - T.
4 NUMERIC BUTTONS Press to select a service, enter your PIN Code or numeric on the menu. INFORMA TION (RED) Press to display the programme information box on the screen. And this button functions same as the RED button on the menus. SOUNDTRACK (GREEN) Press to display the soundtrack list for the current service.
5 STB Connection TV LED(AMBER) The LED lights on in TV mode. RADIO LED(GREEN) The LED lights on in RADIO mode. DISPLA Y Shows service number , error messages, RCU commands and time in Standby mode. ST ANDBY LED(RED) Indicates that the STB is under standby .
6 1. Connect one end of a 21-pin SCART cable to the TV SCAR T connector on the STB and the other end to a SCART socket on your TV . 2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV .
7 STB Connection TV with VCR and Motorised System (DiSEqC 1.2) 1. Connect one end of a 21-pin SCART cable to the TV SCAR T connector on the STB and the other end to a SCART socket on your TV . 2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR.
8 Reference All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously . If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.
9 The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part.
T o adjust the volume level, use the buttons or buttons. T o temporarily stop the volume, press the Mute( )button. T o cancel mute, press the Mute( )button again or press the buttons or buttons. When you want to change the audio language of current service, press the Green( )button firstly .
11 Guide of Main Menu The select service displays the required service list which can be viewed in Simple or Advanced mode. Y our STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services.
12 T o select the desired in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: 1.
13 Guide of Main Menu 1. Press the Green( )button on the remote control unit to select the Favourite service list. N N N N o o o o t t t t e e e e : The groups are labeled in four dif ferent alphabet characters (A,B,C,D). 2. Use the buttons to select a favourite group that you want.
14 Y ou can watch a programme being shown and reserve it in the TV Guide mode. T o enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. T o select the TV/Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide.
Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name.
16 This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units.
17 Guide of Main Menu Y ou can set the Current T ime and W akeup T ime in this mode. Furthermore, the Service Number in the W akeup mode and Sleep T ime (standby mode) can be set. When a VCR is connected, recording can be automatically done according to W akeup/Sleep T ime Setting.
18 Set the video mode for the TV SCAR T output. Set the audio mode which is output from the TV SCAR T and RCA/Cinch Jack. (Stereo/Mono) lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service.
19 Guide of Main Menu Select the OSD T ransparency , Information Box Display T ime and so on. Select the OSD T ransparent type. It affects Information box, Soundtrack, Subtitle, Service list, T ime and Quick mode of TV Guide. Use the buttons to toggle transparent, opaque, 20%, 40%, 60% and 80%.
20 • Move 1. Press the Green( )button to move the service to where you want to locate. Then, the icon( ) will be displayed in front of the service number . 2. Use the buttons to select a new location. 3. Press the button to fix the location. 4. Press the button to return to the original location.
21 Guide of Main Menu • Y ou can move the service only within the Favourite group. • Coloured keys are available when the cursor is located in the middle window . (Except when the middle window is disabled(grey).) • T o select the Favourite group; 1.
The Organise Radio Services functions same as TV Services except that it uses Radio Services. Y ou can delete or move Radio Services and change the attributes of them. The Organise All Services lets the user Delete, Move, Lock, Skip or Rename Radio services on the All Radio services list.
23 Guide of Main Menu 4-3. Service Searching Enter the PIN Code to access the Service Searching menu as you access the Parental Control or Service Organising menu. Press the button to start Service Search after setting the parameters. ** The default PIN Code is .
24 1. Select the L.O. Frequency that is set to antenna. 2. Use the buttons to select the LNB frequency (Universal, 5150, 9750, 10600, 10750, 1 1475MHz or 0, 1, ......., 9). 3. If the required LNB Frequency is not available, then select “0” and enter the frequency manually using the Numeric buttons(0~9).
25 Guide of Main Menu Service Search OSD • If you press the button during the search, then Service Search stops and the searching menu will appear . • When you find all the services, the following picture appears. • Before saving it, you can select the services you want to delete.
26 Set the search parameters(Frequency , Symbol Rate, etc.) to manually find the services that you have selected in the transponder . The bar on bottom of the submenu shows the signal quality(BER) of the entered parameters. Select the target antenna for Manual Search.
27 Guide of Main Menu Performs a manual search with the ability to enter PID(Video/Audio/ PCR) values. This mode is necessary when you search for the signal that has abnormal service Infornation tables. The setting of the sub items is the same as Manual Search.
28 When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency . Select the target antenna for Automatic Service Search.
The picture searches with varying Frequency , Symbol Rate and FEC etc. Satellite Name is the name that the user selects to correspond with Antenna Alternative of Antenna Setting. The progress bar(%) appears on bottom of the picture. During the search, services that are found are displayed as follows: 1.
The user will select a single programme provider by selecting its distributor label and you can get the information of available entitlements. • Subscription Y ou can see the vaild period of each service. • PPV (Pay Per View) If you purchased events in advance, the entitlements of Pay Per View events will be displayed.
31 Motorised system DiSEqC 1.2 User Instructions 1. Satellite Setting Menu Options If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.
32 3. Initial Satellite Position Search 4. Motor Limit Setting This is required when you first set your receiver up to use DiSEqC 1.2 and sets the positions of all pre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated.
33 Motorised system T o set the West Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your West Limit.
34 6. Moving to a pre-set Satellite 7. Searching for services on your selected satellite 8. Automatic Search Once you have stored the positions of the satellites you want (see left below) you can now search for the services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search.
T roubleshooting Guide 35.
36.
37 Menu Map.
38 Gneral Smart Card Information Available Entitlemants Maturity Rating PIN Code Mail Box.
39 Specification Conditional Access Interface T uner & Channel PCMCIA CryptoWorks Embedded 2 Slot Common Interface 1 Slot Smart card MPEG T ransport Stream A/V Decoding Memory Y ou can use a special antenna switch with DiSEqC commands.
40 A/V & Data In/Out TV SCART VCR SCART VIDEO AUDIO R/L S/PDIF RS-232C Video Output(CVBS, S-V ideo, RGB) Audio Output (Resolution : 20 bits DAC, Max. 2 V rms) Video Output(CVBS) Video Input(CVBS, S-V ideo, RGB) Audio Output(Resolution : 20 bits DAC, Max.
HOCRCI5500.700.
デバイスHumax CRCI-5500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Humax CRCI-5500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHumax CRCI-5500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Humax CRCI-5500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Humax CRCI-5500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Humax CRCI-5500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHumax CRCI-5500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Humax CRCI-5500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHumax CRCI-5500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
