HyundaiメーカーM220Wの使用説明書/サービス説明書
ページ先へ移動 of 43
MULTI FUNCTION MONITOR MODELS : M220W I W220T I W240T.
Kind of equipment : Multi Function Monitor Safety : EN60065:2001 / IEC60065 : 2001 EMC : EN 55013 : 2001 + A1: 2003 EN 55022 : 1998 + A1:2000 + A2:2003 EN 55024 : 1998 + A1:2001 + A2:2003 EN 55020 : 2002 + A1:2003 EN 61000-3-2:2000 , EN 61000-3-3:1995+A1:2001 T ype-Designation : L22MDE081 / L24MDF080 WE Hyundai IT CORP .
ENGLISH T able of Contents General Information Image Sticking Precaution ....................................................1 Safety Precaution .................................................................2 Contents of the Package ...............
1 General Information ENGLISH When watching a still Image within motion pictures and Wide/P anorama/Zoom/ /4:3 screen/14:9 1. Note : - When the central area of the screen and the screen edges are fixe.
2 General Information ENGLISH Safety Precaution The contents of this section are provided for the safety of users and their property. Please read the instructions carefully before using. Do not connect multiple electrical appliances to a single outlet.
3 General Information ENGLISH If there is a persistent accumulation of dusts or water on the plug, please make sure to wipe it off using a dry cloth. - It may cause a fire or an electric shock. Firmly plug in the power cord so that it does not pull out.
4 General Information ENGLISH Do not place any heat sources such as radiators and heat registers, etc. near the TV. - It may cause a fire. Do not block ventilating slits with a table cloth. - Blocking the ventilation slits may produce internal heat increase, resulting in a fire.
5 General Information ENGLISH Do not install the product on the floor. - This may cause the TV to fall resulting in serious injury. Unplug the product during lightning or thunderstorms and never touch the antenna cable. - It may cause a fire or an electric shock.
6 General Information ENGLISH Contents of the Package When opening the package, please ensure to check the following accessories. Antenna Cable (coaxial cable) Power Cord Remote Control & 2 batteries (1.
7 General Information ENGLISH Parts Names and Functions Front V iew -W220T/W240T Menu button Use this button to display or exit from the menu mode. Source button Use this button to select each item from the menu mode. Channel buttons Use these buttons to change channels.
8 General Information ENGLISH Rear V iew -W220T/W240T Power input terminal Antenna input terminal RS232 input terminal DTV Upgrade terminal HDMI input terminal Full Scart input terminal D-SUB input terminal Audio input terminal Audio Output terminal ✓ - it's for technical service do not use at home.
9 General Information ENGLISH Front V iew -M220W * This product image may be a bit different from the actual product. Menu button Use this button to display or exit from the menu mode. Source / Select button Source : Use this button to switch among inputs connected to the TV.
10 General Information ENGLISH Rear V iew -M220W Power (AC) input terminal Antenna input terminal RS232 input terminal DTV Upgrade terminal HDMI input terminal Full Scart input terminal D-SUB input terminal Audio input terminal ✓ - it's for technical service do not use at home.
11 Connections ✓ When inserting a 75 ohm coaxial cable into the input connection, ensure the wire tip not to bend. ✓ If you experience poor signal reception, we recommend you purchase a signal amplifier for better picture quality.
12 Connections How to Connect t he PC 1. Connect the PC signal cable (15-pin D-sub) between the output terminal of PC and the D-sub input terminal of TV. 2. Connect the Audio cable between Audio output terminal of PC and Audio input terminal for PC on the rear of TV.
13 Connections *1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. *2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.
14 Connections Remote Control 1. POWER/STANDBY 2. MUTE 3. PREVIOUS PROGRAM 4. MENU SELECTION Use this button to select menu items. 5. MENU Use this button to call the OSD on the screen. 6. PROGRAM SELECTION 7. SOURCE 8. A/D TV Use this button to switch the input source from analog to digital.
15 Connections How to Insert Batteries in the Remote Controller * Battery type :1.5V/AAA Press and hold part and push to open cover. Insert batteries with proper polarities of + and -. Use the remote control with cover closed. T eletext & Faste xt Function 1.
16 Connections Different OSD Menu You can confirm OSD menu of three different types. How to Set the OSD Screen ANALOG TV - Terrestrial broadcasting for supporting analog PAL/SECAM system. H-SCART - Basically the same as Full SCART in function but not supporting RGB Video signals.
17 Picture Setup ENGLISH Press MENU button. Menu items appear on the screen. Press [OK] button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / or [OK] buttons to select “Picture mode”. The menu changes in the following order.
18 Picture Setup ENGLISH Press MENU button. Menu items appear on the screen. Press [OK button to select “Picture” Icon. picture mode is highlighted.
19 Picture Setup ENGLISH Press MENU button. Menu items appear on the screen. Press [OK] button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons to move to “COLOR TONE”. Press / or [OK] buttons to select “COLOR TONE”.
20 ENGLISH Press MENU button. Menu items appear on the screen. Press [OK] button to select “Picture” Icon. “PICTURE MODE” is highlighted. Press / buttons to move to “NR”. Press / buttons to select to “NR”. Press / or [OK] buttons to set ON/OFF .
21 Sound Setup ENGLISH How to Adjust the Desired Audio Mode Users can adjust sound mode automatically as they want. Press MENU button. Menu items appear on the screen. Press / buttons to move to “SOUND” icon. Press [OK] button to select “SOUND” icon.
22 ENGLISH Sound Setup / Channel Setup Press MENU button. Menu items appear on the screen. Press [OK] button to select “SOUND” Icon. “MODE” is highlighted. Press / buttons to move to “SOUND MODE”. Press / or [OK] buttons to select to SOUND MODE .
23 Channel Setup ENGLISH Press MENU button. Menu items appear on the screen. Press / Buttons to move to “CHANNEL” icon. Press [OK] button to select “CHANNEL” Icon. “COUNTRY” is highlighted. Press / Buttons to move to “MANUAL STORE”. Press / or [OK] button to select “MANUAL STORE”.
24 Channel Setup ENGLISH Press MENU button. Menu items appear on the screen. Press / Buttons to move to “CHANNEL” icon. Press [OK] buttons to select “CHANNEL” Icon. “COUNTRY” is highlighted. Press / Buttons to move to “add/delete, sort,name”.
Press MENU button. Menu items appear on the screen. Press [OK] utton to select “Set up” Icon. “Reset” is highlighted. Press / [OK] or buttons to select to “RESET”. Press [OK] buttons to choose to RESET . Press EXIT button to TV viewing or press MENU button to return to the previous menu.
26 Function Setup ENGLISH Press Menu button. Menu items appear on the screen. Press [OK] button to select “SET-UP” Icon. “RESET” is highlighted. Press / buttons to move to “TIME”. Press / or [OK] buttons to select “TIME”. Time menu appears, then “CLOCK” is highlighted.
27 Function Setup ENGLISH How to set osd tone Press MENU button. Menu items appear on the screen. Press [OK] button to select "set up"icon “RESET” is highlighted. Press / buttons to move to "osd tone" Press / or [OK] buttons to select to "osd tone".
28 Function Setup ENGLISH How to Set T elete xt in A TV You can use Teletext service in analog TV mode. If it is included in you receiving channels. Press “TTX/MIX” button and wait.
29 Function Setup / DTV Channel Setup ENGLISH Press MENU button. Menu items appear on the screen. Press / Buttons to move to “DTV CHANNEL” icon. Press [OK] button to select “DTV CHANNEL” Icon.
30 ENGLISH ENGLISH DTV Channel Setup Press MENU button. Menu items appear on the screen. Press / Buttons to move to “DTV CHANNEL” icon. Press [OK] button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. Press / Buttons to move to “MANUAL SCAN”.
31 DTV Channel Setup Press MENU button. Menu items appear on the screen. Press / Buttons to move to “DTV CHANNEL” icon. Press [OK] button to select “DTV CHANNEL” Icon. “AUTO SCAN” is highlighted. Press / Buttons to move to “GUIDE”. Press [OK] buttons to select GUIDE” Program Guide menu appears.
32 DTV Channel Setup How to Select Channel List Users can change the current channel to any other channel they want. Press MENU button. Menu items appear on the screen. Press / buttons to move to “DTV CHANNEL” icon. Press [OK] button to select “DTV CHANNEL” Icon.
33 DTV Channel Setup 1. Press number key [4] will open a message box for you to enter password, and the default password is “0000”. 2. There are five items of “TV Channel List Edits”: Delete, Skip, Lock, Edit, and elete all. 3 . Press [Exit] key to exit “TV Channel List Edit” menu.
34 DTV Channel Setup Setting TV System You can press [Left/Right] key to select on or off. LCN Mode can control the channel whether sort by the sequence information in the streams. The options are: On / Off. You can press [Left/Right] key to select each mode circularly.
35 DTV Channel Setup Setting Region and Time When you enter to “Region & Time” menu, you will see “Region” and “Time Setting” items like below: Region: Region is used for selecting the country which you are in. You can press [Left/Right] key to select each mode circularly.
36 DTV Channel Setup Setting Parental Lock In “Parental Lock” function, press [OK] key, there will pop a dialogue for you to input the password. The default password is “0000”.
37 DTV Channel Setup How to Set T elete xt in DTV Press [TTX/MIX] to show teletext information. Select “on” OSD , and select language on the OSD. Press [TTX/MIX] key to control about the background of the teletext like below the picture 1 2 3 How to Set Subtitle Press [S.
38 Appendix T roubleshooting Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Picture is distorted or frozen while watching digital broadcasting.
39 Appendix After setting the time, I turned TV off and turn it on. The programmed information has been erased. Symptom Too much noise occurs. No sound while viewing a cable channel Picture is OK but sound does not come out. One of the speakers does not produce sound.
40 Appendix Product Specifications - The above specifications may be subject to change without prior notice. M220W 1 (A/V) 1 D-SUB 1680 X 1050 @ 60 Hz 1680 X 1050 @ 60 Hz 3W x2ch 1 PAL/SECAM L FM, NICAM 38 SCART, PC, HDMI 100-240v AC Typical 50W Typical 1.
デバイスHyundai M220Wの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Hyundai M220Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHyundai M220Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hyundai M220Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hyundai M220Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hyundai M220Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHyundai M220Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hyundai M220Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHyundai M220Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。