HyundaiメーカーTucson (2005)の使用説明書/サービス説明書
ページ先へ移動 of 272
2005 jmhma-11.p65 9/24/04, 10:10 AM 1.
Seoul Korea Printing: OCT. 15, 2004 Publication No.: A2EO-EU4OB Printed in Korea SERVICE STATION INFORMATION FUEL: UNLEADED gasoline only Pump Octane Rating of 87 (Research Octane Number 91) or higher. FUEL TANK CAPACITY US.gal (Imp.gal., liter) 2.7L: 17 (14.
10 10 INDEX jmhma-10.p65 9/24/04, 10:10 AM 1.
10 INDEX 2 A Air bag ............................................................................................... 1-30 Air Cleaner Filter ............................................................................... 6-11 Air Conditioning Care ...
10 INDEX 3 Consumer Information ...................................................................... 8-12 Cooling Fans ..................................................................................... 6-24 Corrosion protection Cleaning the interior .
10 INDEX 4 H Hazard Warning System . ................................................................. 1-56 Heating and Cooling Cont rol ............................................................. 1-84 Heating and Ventilation Air flow control ......
10 INDEX 5 R Rear Seat Adjusting seatback angle ............................................................. 1-15 Folding rear seatback .................................................................. 1-15 Rear Window Defroster Switch .............
10 INDEX 6 Traction ........................................................................................ 8-10 Towing A trailer (or vehicle) ...................................................................... 2-23 Emergency .....................
9 Measuremen t ................................................................ 9-2 Engine ........................................................................... 9-3 Lubrication Chart ........................................................... 9-4 9 VEHICLE SPECIFICA TIONS jmhma-9.
9 VEHICLE SPECIFICATIONS 2 J010A01JM-AAT MEASUREMENT 170 (4,325) 70 (1,795) 66 (1,680) 103 (2,630) 60 (1,540) 60 (1,540) Overall Length Overall Width Overall Height (Unladen) Wheel base Wheel tread Front Rear J060A01JM-AAT FUEL SYSTEM J020A01JM-AAT POWER STEERING in.
9 VEHICLE SPECIFICATIONS 3 GASOLINE 0.039 ~ 0.043 in. (1.0 - 1.1 mm) 2.7 V6 6-Cyl., V-type DOHC 86.7 × 75.0 2,656 1-2-3-4-5-6 Auto lash Auto lash Auto lash Auto lash 650 ± 100 BTDC 12° ± 5° 2.
9 VEHICLE SPECIFICATIONS 4 Oil & Grease Standard API SJ, SL or ABOVE, SAE 5W-20, 5W-30 ILSAC GF-3 or ABOVE SAE 10W-30 [ABOVE 0°F (-18°C)] HYUNDAI GENUINE PARTS SAE MTF SAE 75W/85 (API GL-4) HYUNDAI GENUINE ATF SP III, DIAMOND ATF SP III, SK ATF SP III or other brands approved by Hyundai Motor Co.
Vehicle Identification Number (VIN) .............................. 8-2 Engine Number ............................................................. 8-2 Tire Information ............................................................. 8-2 Recommended Inflation Pressures .
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 2 ENGINE NUMBER VEHICLE IDENTIFICATION NUMBER (VIN) I010B01A-AAT I010A02JM-AAT The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 3 ! TIRES I030A01JM-AAT RECOMMENDED INFLATION PRES- SURES I020A02A-AAT TIRE INFORMATION The tires supplied on your new Hyundai are chosen to provide the best perfor- mance for normal driving.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 4 Federal law requires tire manufacturers to place standardized information on the sidewall of all tires.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 5 1. Manufacturer or Brand name o Manufacturer or Brand name is shown. 2. Tire size (example: P235/60R16 99T) o The "P" indicates the tire is de- signed for passenger vehicles.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 6 I030D01JM-AAT TIRE TERMINOLOGY AND DEFINI- TIONS Air Pressure: The amount of air inside the tire pressing outward on the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa).
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 7 Intended Outboard Sidewall: The side of an asymmetrical tire, that must al- ways face outward when mounted on a vehicle. Kilopascal (kPa): The metric unit for air pressure.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 8 Vehicle Capacity Weight: The number of designated seating positions multi- plied by 150 lbs.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 9 HEF-241 I070A01A-AAT TIRE BALANCING A tire that is out of balance may affect handling and tire wear. The tires on your Hyundai were balanced before the car was delivered but may need balancing again during the years you own the car.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 10 ! WARNING: o Driving on worn-out tires is dan- gerous! Worn-out tires can cause loss of braking effectiveness, steering control and traction. When replacing tires, never mix radial and bias ply tires on the same car.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 11 SPARE TIRE AND TOOLS I100A02E-AAT Your Hyundai is delivered with the fol- lowing: Spare tire and wheel Wheel nut wrench, Wrench bar Jack HJM4007 I110A01A-AAT SHOP MANUAL A Hyundai Shop Manual is available from your authorized Hyundai dealer.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 12 I130B04A-AAT Tire Quality Grading Department of Transportation quality grades - All passenger vehicle tires must conform to Federal Safety Stan- dards in addition to these grades.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 13 Traction AA, A, B, C - The traction grades, from highest to lowest, are AA, A, B, and C.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 14 REPORTING SAFETY DEFECTS I130C01A-AAT If you believe that your vehicle has a defect which could cause a.
8 CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS 15 I140A01A-AAT Any claim or dispute you may have related to your vehicle's warranty or the duties co.
7 Emission Control System ............................................. 7-2 Catalytic Converter .......................................................
7 EMISSION CONTROL SYSTEMS 2 EMISSION CONTROL SYSTEM H010D01A-AAT 3. Exhaust Emission Control System The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performace. H010B01A-AAT 1.
7 EMISSION CONTROL SYSTEMS 3 CATALYTIC CONVERTER ! WARNING: o Use unleaded fuel only. o Maintain the engine in good operating condition. Extremely high catalytic con- verter temperatures can result from im- proper operation of the electrical, igni- tion or multiport electronic fuel injec- tion.
6 Engine Compartment .................................................... 6- 2 General Checks ............................................................ 6-4 Checking the Engine Oil ............................................... 6-5 Changing the Oil and Filter .
6 DO-IT-YOURSELF MAINTENANCE 2 ENGINE COMPARTMENT G010A01JM-GAT (2.7 Gasoline) 1. Power steering fluid reservoir 2. Brake & Clutch fluid reservoir 3. Air cleaner 4. Fuse and Relay box 5. Windshield washer fluid reservoir 6. Engine oil level dipstick 7.
6 DO-IT-YOURSELF MAINTENANCE 3 G010B01JM-AAT (2.0 Gasoline) G010B01JM 1. Power steering fluid reservoir 2. Engine oil filler cap 3. Brake & Clutch fluid reservoir 4. Air cleaner 5. Fuse and Relay box 6. Windshield washer fluid reservoir 7. Engine oil level dipstick 8.
6 DO-IT-YOURSELF MAINTENANCE 4 GENERAL CHECKS G020C01A-AAT Vehicle Interior The following should be checked each time when the vehicle is driven: o Lights operation o Windshield wiper operation o Horn.
6 DO-IT-YOURSELF MAINTENANCE 5 CHECKING THE ENGINE OIL G030A01A-AAT Engine oil is essential to the performance and service of the engine. It is suggested that you check the oil level at least once a week in normal use and more often if you are on a trip or driving in severe conditions.
6 DO-IT-YOURSELF MAINTENANCE 6 WARNING: Be very careful not to touch the radiator hose when adding the engine oil as it may be hot enough to burn you. ! CHANGING THE OIL AND FILTER If the oil level is close to or below the "L" mark, add oil until it reaches the "F" mark.
6 DO-IT-YOURSELF MAINTENANCE 7 6. Install a new oil filter in accordance with the instructions on the carton or on the filter itself. Do not over-tighten. (Tightening torque : 1.2 ~ 1.6 kgf.m) Be sure that the mounting surface on the engine is clean and that the old gasket is removed completely.
6 DO-IT-YOURSELF MAINTENANCE 8 G050B01A-AAT Recommended Engine Coolant Use a high quality ethylene-glycol coolant in a 50/50 mix with water. The engine coolant should be compatible with aluminum engine parts. Additional corrosion inhibitors or additives should not be used.
6 DO-IT-YOURSELF MAINTENANCE 9 ! ! WARNING: The cooling fan is controlled by engine coolant temperature and may sometimes operate even when the engine is not run- ning. Use extreme caution when working near the blades of the coolant fan so that you are not injured by a rotating fan blade.
6 DO-IT-YOURSELF MAINTENANCE 10 SPARK PLUGS G060B01JM-AAT Replacing the Spark Plugs The spark plugs should be changed at the intervals specified in the vehicle maintenance schedule in Section 5 or whenever engine performance indicates they should be changed.
6 DO-IT-YOURSELF MAINTENANCE 11 HJM5038 CHANGING THE AIR CLEANER FILTER G070A01E-AAT To change the filter, unsnap the clips around the cover. When this is done, the cover can be lifted off, the old filter removed and the new filter put in its place. Genuine Hyundai Replacement Parts are recommended.
6 DO-IT-YOURSELF MAINTENANCE 12 G090A01JM FILLING THE WASHER RESERVOIR G090A01JM-AAT The washer fluid reservoir supplies fluid to the front and rear washer systems.
6 DO-IT-YOURSELF MAINTENANCE 13 CHECKING THE TRANSAXLE OIL (MANUAL) G100A02JM-AAT Transaxle lubricant in the manual transaxle should be checked at those intervals specified in the vehicle maintenance schedule in Section 5. Recommended Oil Use only HYUNDAI GENUINE PARTS MTF 75W/85 (API GL-4) or EQUIVALENT in the manual transaxle.
6 DO-IT-YOURSELF MAINTENANCE 14 ! ! G110D02O-AAT To Check the Transaxle Fluid Level Park the car on level ground with the parking brake engaged. When the transaxle fluid level is checked, the transaxle fluid should be at normal operating temperature and the engine idling.
6 DO-IT-YOURSELF MAINTENANCE 15 HJM5011 2. Remove the transaxle dipstick, wipe it clean, reinsert the dipstick as far as it will go, then remove it again. Now check the fluid level on the dipstick. It should be in the "HOT" range on the dipstick.
6 DO-IT-YOURSELF MAINTENANCE 16 HJM5007 ! G120E02A-AAT Adding Brake Fluid WARNING: Handle brake fluid carefully. It can damage your vision if it gets into your eyes. Use only DOT 3 or DOT 4 specification fluid from a sealed container. Do not allow the fluid can or reservoir to remain open any longer than required.
6 DO-IT-YOURSELF MAINTENANCE 17 ! G130B02A-AAT To Replace the Fluid Recommended brake fluid conforming to DOT 3 or DOT 4 specification should be used. The reservoir cap must be fully tightened to avoid contamination from foreign matter or moisture. NOTE: Do not allow any other liquids to contami- nate the brake fluid.
6 DO-IT-YOURSELF MAINTENANCE 18 When the air conditioning is being used regu- larly, the compressor drive belt tension should be checked at least once a month with the engine turned off. To check the drive belt tension, press down on the belt halfway between the engine crankshaft and compressor pulleys.
6 DO-IT-YOURSELF MAINTENANCE 19 G150A01JM 3. Remove the air conditioner filter cover by pressing both side's clips. HJM2135 ! B145A01JM 4. Remove the air conditioner filter by lifting it. 5. Installation is the reverse order of disassem- bly. CAUTION: Be sure to install the air conditioner filter in the direction of the arrow sign.
6 DO-IT-YOURSELF MAINTENANCE 20 G180A01L G160A01HR G160A01HR CHECKING BRAKE PEDAL CLEARANCE G180A01A-AAT You need a helper to check the brake pedal clearance. With the engine running, have your helper press down on the brake pedal several times and then hold it down with a force of about 110 lbs (50 kg, 490 N).
6 DO-IT-YOURSELF MAINTENANCE 21 G190A01GK DOHC CVVT V6 Water Pump Pulley 0.2~0.24 in. (5~6 mm) Power steering COMP Auto tensioner Alternator Pulley Crankshaft Pulley Alternator Eng.pulley CHECKING DRIVE BELTS Drive belts should be checked periodically for proper tension and adjusted if necessary.
6 DO-IT-YOURSELF MAINTENANCE 22 G200B02L ! fuse of the same rating into place. The fuse should be a snug fit. If it is not, have the fuse clip repaired or replaced by a Hyundai dealer.
6 DO-IT-YOURSELF MAINTENANCE 23 CHECKING THE BATTERY ! G210A01A-AAT WARNING: Batteries can be dangerous! When working with batteries, carefully observe the follow- ing precautions to avoid serious injuries. The fluid in the battery contains a strong solution of sulfuric acid, which is poisonous and highly corrosive.
6 DO-IT-YOURSELF MAINTENANCE 24 POWER STEERING FLUID LEVEL G230A03A-AAT G220C01A-AAT Checking Condenser Cooling Fan The condenser cooling fan should come on automatically whenever the air conditioning is in operation. The power steering fluid level should be checked regularly.
6 DO-IT-YOURSELF MAINTENANCE 25 HEADLIGHT AIMING ADJUSTMENT ! 6. Draw a vertical line (through the center of each headlight beam pattern) and a horizon- tal line (through the center of each headlight beam pattern) on the aiming screen. And then, draw a parallel line at 0.
6 DO-IT-YOURSELF MAINTENANCE 26 REPLACEMENT OF LIGHT BULBS ! G260A02A-AAT Before attempting to replace a light bulb, be sure the switch is turned to the "OFF" position. The next paragraph shows how to reach the light bulbs so they may be changed.
6 DO-IT-YOURSELF MAINTENANCE 27 HJM5016 HJM5013 HJM5017 G270A02O-AAT Headlight and Front Turn Signal Light 1. Allow the bulb to cool. Wear eye protection. 2. Open the engine hood. 3. Always grasp the bulb by its plastic base, avoid touching the glass.
6 DO-IT-YOURSELF MAINTENANCE 28 G270B01JM-AAT Rear Combination Light ! WARNING: This halogen bulb contains gas under pres- sure and if impacted could shatter, result- ing in flying fragments. Always wear eye protection when servicing the bulb. Protect the bulb against abrasions or scratches and against liquids when lighted.
6 DO-IT-YOURSELF MAINTENANCE 29 HJM5022 (1) (2) (3) (4) G270I02JM-GAT Front fog Light (If installed) HJM5047 1. Remove the cover with a phillips screw driver. 2. Remove the bolts with a wrench. 3. Disconnect the power cord. HJM5049 HJM5050 4. Replace to the new bulb.
6 DO-IT-YOURSELF MAINTENANCE 30 G270C02JM-AAT Cargo Light 1. Open the tail gate. 2. Remove the cover with a flat blade screw- driver. 3. Replace to the new bulb. HTB284 G270C02TB-GAT Luggage Compartment Light (If Installed) G270C01JM 1. Remove the cover with a flat blade screw driver.
6 DO-IT-YOURSELF MAINTENANCE 31 G270E01JM G270E01O-AAT Front Side Marker Light 1. Remove the cover with a phillips screw- driver. 2. Disconnect the connector. 3. Replace with a new bulb. HJM5024 G270E02HR G270E03HR 3. Replace with a new bulb. jmhma-6.
6 DO-IT-YOURSELF MAINTENANCE 32 G270G01O-AAT Interior Light 1. Remove the cover with a flat blade screw- driver. G270H01O-AAT Glove Box Illuminated Light 1. Open the glove box. 2. Remove the cover with a flat blade screw- driver. HJM5025 HJM5026 HJM5045 2.
6 DO-IT-YOURSELF MAINTENANCE 33 3. Disconnect the connector. 4. Replace with a new bulb. HJM5039 HTB284 jmhma-6.p65 9/24/04, 10:00 AM 33.
6 DO-IT-YOURSELF MAINTENANCE 34 BULB WATTAGE G280A01JM-AAT Part Name Front Postion Light Glove Box Illuminated Light Head Light (Low/High) Interior Light Front Fog Light (If installed) Turn Signal Light Side Marker Front Door Edge Warning Light (If installed) No.
6 DO-IT-YOURSELF MAINTENANCE 35 FUSE PANEL DESCRIPTION G200C01JM-GAT Engine Compartment G200C01JM NOTE: Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
6 DO-IT-YOURSELF MAINTENANCE 36 G200E01JM-AAT Inner Panel G200E01JM jmhma-6.p65 9/24/04, 10:00 AM 36.
6 DO-IT-YOURSELF MAINTENANCE 37 FUSE P/WDW-LH P/WDW-RH TAIL RH RR HTR A/BAG CLUSTER TAIL LH AUDIO C/LIGHTER & P/OUTLET SPARE RR FOG HTD MIRR AUDIO IG COIL IMMO P/OUTLET S/HTR A/CON SW START PROTEC.
6 DO-IT-YOURSELF MAINTENANCE 38 FUSE IG-SW ROOM LP AMP T/SIG A/BAG IND RR WIPER A/CON IGN HAZARD S/ROOF STOP H/FREE ECU FF WIPER 4WD DEICER TCU ABS PROTECTED COMPONENTS Ignition switch Room lamp, A/C .
5 Maintenance Intervals ................................................... 5-2 Scheduled Maintenance ................................................ 5-4 Maintenance under Severe Usage Conditions ............. 5- 6 Explanation of Scheduled Maintenance Items .
5 VEHICLE MAINTENANCE REQUIREMENTS 2 F010C01A-AAT Specified Scheduled Procedures These are the procedures such as inspections, adjustments and replacements that are listed in the maintenance charts starting on page 5-4.
5 VEHICLE MAINTENANCE REQUIREMENTS 3 F020A02Y-AAT SCHEDULED MAINTENANCE REQUIREMENTS o Inspection should be performed any time a malfunction is experienced or suspected. o Receipts for all emission control system services should be retained to demonstrate compliance with conditions of the emissions system warranty.
5 VEHICLE MAINTENANCE REQUIREMENTS 4 R: 100.000 miles / 120 months SCHEDULED MAINTENANCE F030B02JM-AAT R :Replace I : Inspect and, after Inspection, clean, adjust, repair or replace if necessary.
5 VEHICLE MAINTENANCE REQUIREMENTS 5 Note : (1 ) When replace drive belt and inspect water pump. (2 ) For every 48 months or 37,200 miles (60,000 km), whichever occurs first : "I" For every .
5 VEHICLE MAINTENANCE REQUIREMENTS 6 MAINTENANCE UNDER SEVERE USAGE CONDITIONS SEVERE DRIVING CONDITIONS A - Repeatly driving short distance of less than 5miles(8km) in normal tempera ture or less tha.
5 VEHICLE MAINTENANCE REQUIREMENTS 7 F060D01A-AAT o Fuel Lines, Fuel Hoses and Connec- tions Check the fuel lines, fuel hoses and connec- tions for leakage and damage.
5 VEHICLE MAINTENANCE REQUIREMENTS 8 F070D01A-AAT o Manual Transaxle Oil Inspect the manual transaxle oil according to the maintenance schedule. NOTE: If the oil level is low, check for possible leaks before adding oil.
5 VEHICLE MAINTENANCE REQUIREMENTS 9 F070L01A-AAT o Suspension Mounting Bolts Check the suspension connections for loose- ness or damage. Retighten to the specified torque. F070G02A-AAT o Brake Fluid Check brake fluid level in the brake fluid reser- voir.
4 Corrosion Protection ..................................................... 4- 2 To Help Prevent Corrosion ........................................... 4-2 Washing and Waxing .................................................... 4- 3 Cleaning the Interior .
4 CORROSION PREVENTION AND APPEARANCE CARE 2 CORROSION PROTECTION E020B01A-AAT Keep Your Car Clean The best way to prevent corrosion is to keep your car clean and free of corrosive materials. Attention to the underside of the car is particu- larly important.
4 CORROSION PREVENTION AND APPEARANCE CARE 3 WASHING AND WAXING E020E01A-AAT Don't Neglect the Interior Moisture can collect under the floor mats and carpeting to cause corrosion. Check under the mats periodically to be sure the carpeting is dry.
4 CORROSION PREVENTION AND APPEARANCE CARE 4 E030D01A-AAT When to Wax Again You should polish and wax the car again when water no longer beads on a clean surface but spreads out over a larger area. E030C01A-AAT Polishing and Waxing Always wash and dry the car before polishing or waxing or using a combination cleaner and wax.
4 CORROSION PREVENTION AND APPEARANCE CARE 5 CLEANING THE INTERIOR E040B01A-AAT To Clean the Leather Upholstery (If installed) In the normal course of use, leather upholstered surfaces will, like any material, pick-up dust and dirt. This dust and dirt must be cleaned off or it may work into the surface of the leather, caus- ing damage.
4 CORROSION PREVENTION AND APPEARANCE CARE 6 ANY QUESTIONS? E040D01A-AAT Cleaning the Seat Belts To clean the seat belts, use a cloth or sponge with mild soap or detergent and warm water. Do not use strong detergents, dye, bleach or abra- sive materials on the seat belts as this may weaken the fabric.
If the Engine will not Start .............................................. 3-2 Jump Starting ................................................................ 3-3 If the Engine Overheats ................................................ 3-4 Spare Tire .
3 2 WHAT TO DO IN AN EMERGENCY IF THE ENGINE WILL NOT START ! D010A01A-AAT D010B02A-AAT If Engine Doesn't Turn Over or Turns Over Slowly D010C02Y-AAT If Engine Turns Over Normally but Does Not Start 1. Check fuel level. 2. With the key in the "OFF" position, check all connectors at ignition, coil and spark plugs.
3 WHAT TO DO IN AN EMERGENCY 3 JUMP STARTING ! o If you should accidentally get acid on your skin or in your eyes, immediately remove any contaminated clothing and flush the area with clear water for at least 15 minutes. Then promptly obtain medical attention.
3 4 WHAT TO DO IN AN EMERGENCY IF THE ENGINE OVERHEATS ! ! ! WARNING: While the engine is running, keep hair, hands and clothing away from moving parts such as the fan and drive belts to prevent injury.
3 WHAT TO DO IN AN EMERGENCY 5 ! 4. As the temporary spare tire is spe- cifically designed for your vehicle, it should not be used on any other vehicle. 5. The temporary spare tire should not be used on any other wheels, nor should standard tires, snow tires, wheel covers or trim rings be used with the temporary spare wheel.
3 6 WHAT TO DO IN AN EMERGENCY IF YOU HAVE A FLAT TIRE D050A02A-AAT If a tire goes flat while you are driving: 1. Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off the road as this may cause a loss of control.
3 WHAT TO DO IN AN EMERGENCY 7 CHANGING A FLAT TIRE D060A02HP-AAT The procedure described on the follow- ing pages can be used to rotate tires as well as to change a flat tire.
3 8 WHAT TO DO IN AN EMERGENCY D060E01A-AAT 4. Put the Jack in Place The base of the jack should be placed on firm, level ground. The jack should be positioned as shown in the drawing. HJM4010 D060D01A-AAT 3. Loosen Wheel Nuts The wheel nuts should be loosened slightly before raising the car.
3 WHAT TO DO IN AN EMERGENCY 9 D060F03E-AAT 5. Raising the vehicle After inserting the wrench bar into the wheel nut wrench, install the wrench bar into the jack as shown in the drawing. To raise the vehicle, turn the wheel nut wrench clockwise. As the jack begins to raise the vehicle, double check that it is properly positioned and will not slip.
3 10 WHAT TO DO IN AN EMERGENCY ! D060H02O-AAT 7. Reinstall Wheel Nuts To reinstall the wheel, hold it on the studs, put the wheel nuts on the studs and tighten them finger tight. The nuts should be installed with their small di- ameter ends directed inward.
3 WHAT TO DO IN AN EMERGENCY 11 D060I01E-AAT 8. Lower Vehicle and Tighten Nuts Lower the car to the ground by turning the wheel nut wrench counterclock- wise. Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated completely over the nut.
3 12 WHAT TO DO IN AN EMERGENCY IF YOUR VEHICLE MUST BE TOWED D080A01O-GAT If your vehicle has to be towed, it should be done by your Hyundai dealer or a commercial tow truck service. This will help assure that your vehicle is not damaged in towing. Also, profes- sionals are generally aware of local laws gov- erning towing.
3 WHAT TO DO IN AN EMERGENCY 13 ! 1 ) If the vehicle is being towed with the rear wheels on the ground, be sure the parking brake is released. NOTE: Before towing, check the level of the auto- matic transaxle fluid. If it is below the "HOT" range on the dipstick, add fluid.
3 14 WHAT TO DO IN AN EMERGENCY For emergency towing when no commercial tow vehicle is available, attach a tow cable, chain or strap to one of the towing hooks under the front/rear of your vehicle. Be very careful when attempting this procedure when the ve- hicle is on any unpaved surface to avoid dam- age to your vehicle.
3 WHAT TO DO IN AN EMERGENCY 15 IF YOU LOSE YOUR KEYS D120A01A-AAT If you lose your keys, many Hyundai dealers can make you a new key if you have your key number. If you lock the keys inside your car and you cannot obtain a new key, many Hyundai dealers can use special tools to open the door for you.
DRIVING Y OUR HYUND AI 2 Engine Exhaust Can Be Dangerous! ............................ 2- 2 Before Starting the Engine ............................................ 2-4 Key Positions ................................................................ 2-4 Startin g .
2 DRIVING YOUR HYUNDAI 2 WARNING: ENGINE EXHAUST CAN BE DANGEROUS! C010A02JM-AAT Engine exhaust fumes can be extremely dangerous. If, at any time, you smell exhaust fumes inside the vehicle, open the windows immediately. o Do not inhale exhaust fumes.
2 DRIVING YOUR HYUNDAI 3 ! ! WARNING: o The 2WD Tucson is not designed for off- road use. The 4WD Tucson is designed primarily for use on paved roads. How- ever, occasional use in off-highway con- ditions such as established unpaved roads and non-challenging off-road trails is allowed.
2 DRIVING YOUR HYUNDAI 4 KEY POSITIONS TO START THE ENGINE C040A01A-AAT CAUTION: The engine should not be turned off or the key removed from the ignition key cylinder while the car is in motion.
2 DRIVING YOUR HYUNDAI 5 NOTE: Do not hold the key in the "START" position for more than 15 seconds. o "ON" When the key is in the "ON" position, the ignition is on and all accessories may be turned on. If the engine is not running, the key should not be left in the "ON" position.
2 DRIVING YOUR HYUNDAI 6 OPERATING THE MANUAL TRANSAXLE 4. Turn the ignition key to the "START" position and release it when the engine starts. After the engine has started, allow the engine to run for 10 to 20 seconds prior to placing the vehicle in gear.
2 DRIVING YOUR HYUNDAI 7 NOTE: o To shift into reverse, rest the lever in neutral for at least 3 seconds after your car is completely stopped. Then move the lever into the reverse position. o During cold weather, shifting may be difficult until the transaxle lubricant has warmed up.
2 DRIVING YOUR HYUNDAI 8 HJM3018 OPERATING THE AUTOMATIC TRANSAXLE ! WARNING: o Avoid high cornering speeds. o Do not make quick steering wheel move- ments, such as sharp lane changes or fast, sharp turns.
2 DRIVING YOUR HYUNDAI 9 NOTE: Depress the brake pedal and push the button when shifting. Push the button when shifting. The selector lever can be shifted freely. The first few shifts on a new vehicle, or if the battery has been disconnected, may be somewhat abrupt.
2 DRIVING YOUR HYUNDAI 10 ! o To maintain the required levels of ve- hicle performance and safety, the sys- tem may not execute certain gearshifts when the selector lever is operated. o Before driving away from a stop on a slippery road, push the selector lever forward into the +(UP) position.
2 DRIVING YOUR HYUNDAI 11 ! C090I02L-GAT CAUTION: o Shift into "R" and "P" position only when the vehicle has completely stopped. o Do not accelerate the engine in reverse or any of the forward positions with the brakes applied.
2 DRIVING YOUR HYUNDAI 12 ! WARNING: ABS will not prevent accidents due to im- proper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always main- tain a safe distance between you and ob- jects ahead. Vehicle speeds should always be reduced during extreme road condi- tions.
2 DRIVING YOUR HYUNDAI 13 ! Driving Hints TCS does not actively apply brakes. Be sure to decelerate the car sufficiently before entering curves. CAUTION: When the TCS indicator blinks, SLIP con- trol function has been activated. It also means that the road is slippery or your car is accelerating excessively.
2 DRIVING YOUR HYUNDAI 14 ! CAUTION: Driving with varying tire or wheel size may cause the ESP system to malfunction. When replacing tires, make sure they are the same size as your original tires. ! C310B01JM-AAT ESP ON/OFF Mode When the ESP is operating, the ESP indicator in the instrument cluster will blink.
2 DRIVING YOUR HYUNDAI 15 C310D01JM-AAT Indicators and Warning The indicators should illuminate when the igni- tion key is turned to ON or START but should go out after three seconds. If the indicators do not illuminate, or the ESP or ESP-OFF indicator does not go out after 3 seconds, have the vehicle checked by an authorized dealer.
2 DRIVING YOUR HYUNDAI 16 HJM1029 Roll tester(Speedometer) Temporary free roller o In unavoidable cases, if the vehicle is being towed with all four wheels on the ground, it should only be towed forward. o While towing, check the following items. 1. The ignition switch is in "ACC" or "ON".
2 DRIVING YOUR HYUNDAI 17 ! CAUTION: o While the full-time 4WD vehicle is being raised on a jack, never start the engine or cause the tires to rotate. There is danger that rotating tires touch- ing the ground could cause the vehicle to go off the jack and to jump forward.
2 DRIVING YOUR HYUNDAI 18 GOOD BRAKING PRACTICES C130A01A-AAT WARNING: Nothing should be carried on top of the cargo area cover behind the rear seat. If there were an accident or a sudden stop, such objects could move forward and cause damage to the vehicle or injure the occu- pants.
2 DRIVING YOUR HYUNDAI 19 o Use caution when parking on a hill. Engage the parking brake and place the gear selec- tor lever in "P" (automatic transaxle) or in first or reverse gear (manual transaxle). If your car is facing downhill, turn the front wheels into the curb to help keep the car from rolling.
2 DRIVING YOUR HYUNDAI 20 SMOOTH CORNERING C150A01A-AAT Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle accelera- tion. If you follow these suggestions, tire wear will be held to a minimum.
2 DRIVING YOUR HYUNDAI 21 C160D01A-AAT Check Battery and Cables Winter puts additional burdens on the battery system. Visually inspect the battery and cables as described in Section 6. The level of charge in your battery can be checked by your Hyundai dealer or a service station.
2 DRIVING YOUR HYUNDAI 22 C160K01A-AAT Carry Emergency Equipment Depending on the severity of the weather where you drive your car, you should carry appropri- ate emergency equipment.
2 DRIVING YOUR HYUNDAI 23 USE OF LIGHTS C180A01A-AAT Check your lights regularly for correct opera- tion and always keep them clean. When driving during the day in conditions of poor visibility, it is helpful to drive with headlights on low beam. This enables you to be seen as well as to see.
2 DRIVING YOUR HYUNDAI 24 C190E01JM x 100 = 10% (MAX) C190E01JM-AAT Trailer Weight Limit o Keep the tongue load 10% of the total trailer load. o Tongue load o Tongue loads can be increased or de- creased by re-distributing the load in the trailer.
2 DRIVING YOUR HYUNDAI 25 ! WARNING: o Improperly loading your vehicle and trailer can seriously affect its steering and braking performance causing a crash which could cause serious injury or death. o Towing a trailer affected vehicle han- dling and braking.
2 DRIVING YOUR HYUNDAI 26 CAUTION: If overheating should occur when towing, (the temperature gauge reads near the red zone), taking the following actions may reduce or eliminate the problem. 1. Turn off the air conditioner. 2. Reduce highway speed. 3.
2 DRIVING YOUR HYUNDAI 27 Steps for Determining Correct Load Limit ( 1)Locate the statement "The combined weight of occupants and cargo should never exceed XXX pounds'' on your vehicle's placard. ( 2 )Determine the combined weight of the driver and passengers that will be riding in your vehicle.
2 DRIVING YOUR HYUNDAI 28 C190F03JM Total 1400 lbs (635 kg) 860 lbs (390 kg) 540 lbs (245 kg) Item A B C Description Vehicle Capacity Weight Subtract Occupant Weight 172 lbs (78 kg) x 5 Available Carg.
2 DRIVING YOUR HYUNDAI 29 C190G01JM-AAT Compliance Label The compliance label is located on the driver's side of the center piller outer panel. The label shows the size of your original tires and the inflation pressures needed to obtain the gross weight capacity of your vehicle.
2 DRIVING YOUR HYUNDAI 30 NOTE: o Overloading your vehicle may cause damage. Repairs would not be covered by your warranty. Do not overload your vehicle. o Using heavier suspension com- ponents to get added durability might not change your weight rat- ings.
1 FEATURES OF YOUR HYUNDAI 84 HEATING AND COOLING CONTROL B710A01JM-GAT 1. Side Defroster Nozzle 2. Side Ventilators 3. Windshield Defroster Nozzles 4. Center Ventilators B710B02O-AAT CENTER VENTILATOR The center ventilators are located in the middle of the dashboard.
1 FEATURES OF YOUR HYUNDAI 85 B670A01JM-AAT There are three controls and two switches for the heating and cooling system. They are: 1. Air flow control 2.
1 FEATURES OF YOUR HYUNDAI 86 With the "Fresh" mode selected, air enters the vehicle from the outside and is heated or cooled according to the function selected.
1 FEATURES OF YOUR HYUNDAI 87 HJM2114 HJM2113 Bi-Level Air is discharged through the face vents and the floor vents. Floor-Level Air is discharged through the floor vents, wind- shield defroster nozzle, side defroster nozzle and side ventilator.
1 FEATURES OF YOUR HYUNDAI 88 HJM2115 Defrost-Level Air is discharged through the windshield de- froster nozzle, side defroster nozzle and side ventilator. If the "Defrost" mode is selected, the A/C will be turned turn on automatically and "Fresh" mode will be activated to improve windshield defrost- ing.
1 FEATURES OF YOUR HYUNDAI 89 HJM2117 Cool Warm B670E02A-AAT Temperature Control This control is used to adjust the degree of heating or cooling desired. B690A01E-AAT For normal heating operation, set the air intake control to the fresh air ( ) position and the air flow control to the floor ( ) position.
1 FEATURES OF YOUR HYUNDAI 90 VENTILATION BI-LEVEL HEATING B710A01S-AAT B700A02E-AAT Your Hyundai is equipped with bi-level heating controls. To use this feature: o Set the air intake control to the fresh air ( ) position. o Set the air flow control at the bi-level ( ) position.
1 FEATURES OF YOUR HYUNDAI 91 NOTE: When the A/C is operated continuously on the floor-defrost level ( ) or defrost level ( ), it may cause fog to form on the exterior windshield because of the temperature difference. At this time set the air flow control to the face level position ( ) and fan speed control to the low position.
1 FEATURES OF YOUR HYUNDAI 92 B740C01S-AAT Dehumidified Heating For dehumidified heating: o Turn on the fan control switch. o Turn on the air conditioning switch. The air conditioning indicator light should come on at the same time. o Set the air intake control to the "Fresh" mode ( ) .
1 FEATURES OF YOUR HYUNDAI 93 B740D01A-AAT Operation Tips o If the interior of the car is hot when you first get in, open the windows for a few minutes to expel the hot air. o When you are using the air conditioning system, keep all windows closed to keep hot air out.
1 FEATURES OF YOUR HYUNDAI 94 AUTOMATIC HEATING AND COOLING CONTROL SYSTEM B970A01Y-AAT (If installed) Your Hyundai is equipped with an automatic heating and cooling control system controlled by simply setting the desired temperature. TYPE A (Without A.
1 FEATURES OF YOUR HYUNDAI 95 Photo sensor HJM2086 NOTE: o If the battery has been discharged or disconnected, the temperature mode will reset to Centigrade degrees.
1 FEATURES OF YOUR HYUNDAI 96 B980B01Y-AAT Fan Speed Control Switch The fan speed can be set to the desired speed by pressing the appropriate fan speed control button. The higher the fan speed is, the more air is delivered. Pressing the "OFF" button turns off the fan.
1 FEATURES OF YOUR HYUNDAI 97 B980C01JM-GAT Air Intake Control Switch (With A.Q.S) (If installed) This is used to select fresh outside air or recirculate inside air automatically. : OFF : ON Fresh Mode : Air enters the vehicle from the outside and is heated or cooled according to the function selected.
1 FEATURES OF YOUR HYUNDAI 98 B980D01Y-AAT Heating and Cooling System Off Press the "OFF" button to stop the operation of the heating and cooling system. ! ated in "AUTO" mode when turning the ignition to the "ON" position if the "AUTO" mode was used before shutting off the engine.
1 FEATURES OF YOUR HYUNDAI 99 HJM2113 HJM2112 Floor-Level When selecting the "Floor-Level" mode, the indicator light will come on and the air will be discharged through the floor vents, windshield defroster nozzle, side defroster nozzle and side ventilator.
1 FEATURES OF YOUR HYUNDAI 100 AIR CONDITIONER FILTER (IN FRONT OF BLOWER UNIT) B760A03E-AAT (If installed) The air conditioner filter is located in front of the blower unit behind the glove box. It operates to decrease the amount of pollutants entering the car.
1 FEATURES OF YOUR HYUNDAI 101 STEREO SOUND SYSTEM B750A02A-AAT How Car Audio Works AM broadcasts can be received at greater distances than FM broadcasts.
1 FEATURES OF YOUR HYUNDAI 102 ! o Fading - As your car moves away from the radio station, the signal will weaken and sound will begin to fade. When this occurs, we suggest that you select another stronger station.
1 FEATURES OF YOUR HYUNDAI 103 K260A01JM-GAT STEREO RADIO OPERATION (K260) (If installed) K260A01JM 1. POWER ON-OFF/ VOLUME /MODE Control Knob 2. TUNE/SEEK Select Button 3.
1 FEATURES OF YOUR HYUNDAI 104 K260B01JM-GAT 1. POWER ON-OFF Control Knob The radio unit may be operated when the ignition key is in the "ACC" or "ON" position. Press the knob to switch the power on. The LCD shows the radio frequency in the radio mode or the CD track indicator in the CD mode.
1 FEATURES OF YOUR HYUNDAI 105 ! BASS Control To increase the bass, rotate the knob clock- wise, while to decrease the bass, rotate the knob counterclockwise.
1 FEATURES OF YOUR HYUNDAI 106 K260C01JM-GAT COMPACT DISC PLAYER OPERATION (K260) (If installed) K260B01JM 2. TRACK UP/DOWN 3. FF/REW Button 4. REPEAT Button 5.
1 FEATURES OF YOUR HYUNDAI 107 B260D02O-AAT 1. Playing CD o Insert the CD with the label facing upward. o Insert the CD to start CD playback, during radio operation. o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
1 FEATURES OF YOUR HYUNDAI 108 CAUTION: o Do not insert warped or poor quality discs into the CD player as damage to the unit may occur. o Do not insert anything like coins into the player slot as damage to the unit may occur. o Do not place beverages close to the audio system.
1 FEATURES OF YOUR HYUNDAI 109 HMP280A01TB-GAT STEREO RADIO OPERATION (M280) (If installed) 1. POWER ON-OFF VOLUME Control Knob 2. BAND Selector M280A01JM 3 . TUNE/SEEK Select Knob (JOY STICK) 4. SCAN Button 5. Best Station Memory Button (BSM) 6. PRESET Buttons 7.
1 FEATURES OF YOUR HYUNDAI 110 ! HMP280B01TB-GAT 1. POWER ON-OFF Control o The radio unit may be operated when the ignition key is in the "ACC" or "ON" position.
1 FEATURES OF YOUR HYUNDAI 111 o Press band selector to set the band for AM, FM and FM2. o Select the desired station to be stored by seek, scan or manual tuning. o Determine the preset station select button you wish to use to access that station. o Press the station select button for more than two seconds.
1 FEATURES OF YOUR HYUNDAI 112 7. TAPE EJECT Button 1. FF/REW Button ( / ) HMP280C01TB-GAT CASSETTE TAPE PLAYER OPERATION (M280) (If installed) M280C01JM 2. AUTO MUSIC Select Button ( / ) 3. TAPE PROGRAM Button 4. REPEAT Button 5. Equalizer (EQ) 6. DOLBY Button jmhma-1b.
1 FEATURES OF YOUR HYUNDAI 113 H290D01O-GAT 1. FF/REW o Fast forward tape winding starts when the FF ( ) button is pressed during PLAY or REW mode. o Tape PLAY starts when the FF ( ) button is pressed again during FF mode. o Tape rewinding starts when the REW ( ) button is pressed during PLAY or FF mode.
1 FEATURES OF YOUR HYUNDAI 114 o This equipment is designed to be used only in a 12 volt DC battery system with negative ground. o This unit is made of precision parts.
1 FEATURES OF YOUR HYUNDAI 115 HMP280E01TB-GAT COMPACT DISC PLAYER OPERATION (COMPATIBLE WITH MP3/WMA/AAC) (M280) (If installed) 1. AUDIO/MP3 CD Select Button M280E01JM 3. Track UP/DOWN Button ( / ) 5. RANDOM Button 4. REPEAT Button 6. EQUALIZER Button 7.
1 FEATURES OF YOUR HYUNDAI 116 H290F02O-GAT 1. AUDIO/MP3 CD Select Button o Insert the CD with the label facing upward. o Insert the CD to start CD playback, during radio operation or cassette tape playing.
1 FEATURES OF YOUR HYUNDAI 117 8 . SCAN o Press the SCAN button to playback the first 10 seconds of each track. o To playback the first 10 seconds of each track in the selected folder, press the SCAN button for 2 seconds or longer. (MP3 CD only) o Press the SCAN button again within 10 sec.
1 FEATURES OF YOUR HYUNDAI 118 CAUTION: o Do not insert warped or poor quality discs into the CD player as damage to the unit may occur. o Do not insert anything like coins into the player slot as damage to the unit may occur. o Do not place beverages close to the audio system.
1 FEATURES OF YOUR HYUNDAI 119 HMP280G01JM-GAT CD CHANGER OPERATION (M280) (If Installed) 1,4. Disc select Knob (JOY STICK) (ENT) M280G01JM 2. FF/REW Button ( / ) 3. Track UP/DOWN Button ( / ) 5. REPEAT Button 6. RANDOM Button 7. SCAN Button 8. Equalizer (EQ) jmhma-1b.
1 FEATURES OF YOUR HYUNDAI 120 B290H02JM-GAT 1. DISC Select Knob (JOY STICK) To select the CD you want push the DISC select knob (JOY STICK) to up and down.
1 FEATURES OF YOUR HYUNDAI 121 ! CAUTION: o Do not insert warped or poor quality discs into the CD changer as damage to the unit may occur. o Do not insert anything like coins into the changer slot as damage to the unit may occur. o Do not place beverages close to the audio system.
1 FEATURES OF YOUR HYUNDAI 122 INDICATION Er2 Er3 Er6 Er7 Er8 HHH B890A01TB-GAT AUDIO FAULT CODE (M280 only) If you see any error indication in the display while using the CD or Tape mode, find the cause in the chart below. If you cannot clear the error indication, take the car to your Hyundai dealer.
1 FEATURES OF YOUR HYUNDAI 123 6. EQ Button J290A01JM-GAT STEREO RADIO OPERATION (J290) (If installed) J290A01JM 1. POWER ON/OFF/VOLUME Control Knob 2. BAND Select Button 3. SEEK Select Button 4. PRESET STATION Select Buttons 5. BEST STATION MEMORY 7.
1 FEATURES OF YOUR HYUNDAI 124 CLASSIC → JAZZ → ROCK → DEFEAT J290B01JM-GAT 1. POWER ON-OFF/VOLUME Control Knob The radio unit may be operated when the ignition key is in the "ACC" or "ON" position. Press the button to switch the power on.
1 FEATURES OF YOUR HYUNDAI 125 Mode Select Knob Pressing the MODE button changes the BASS, MIDDLE, TREBLE, FADER and BALANCE mode. The mode selected is shown on the display. After selecting the each mode, rotate the mode select knob clockwise or counterclockwise.
1 FEATURES OF YOUR HYUNDAI 126 J290C01JM-GAT CASSETTE TAPE PLAYER OPERATION (J290) (If installed) J290C01JM 1.TAPE PROGRAM Button 3. DOLBY Button 4.REPEAT Button 5.
1 FEATURES OF YOUR HYUNDAI 127 J290D01JM-GAT 1. TAPE PROGRAM Button This allows you to play the reverse side of the tape by merely pressing the program button. The PLAY and an arrow will appear in the display to show tape direction. 2. EJECT Button o When the EJECT button is pressed with a cassette loaded, the cassette will eject.
1 FEATURES OF YOUR HYUNDAI 128 1.LOAD Button J290E01JM-GAT COMPACT DISC PLAYER / CD AUTO CHANGER OPERATION (J290) (If installed) J290E01JM 2.Playing CD 3.EJECT Button 4. DISC Select Button 5.RANDOM Play Button 6.REPEAT Button 7.TRACK UP/DOWN 8.FF/REW Button 9.
1 FEATURES OF YOUR HYUNDAI 129 J290F02JM-GAT 1. LOAD Button This compact disc playing will accommodate up to six discs. To insert one disc do the following: 1. Press and release the LOAD Button. 2. Green light on both sides of the slot will be illuminated and the will blink ten times on the display.
1 FEATURES OF YOUR HYUNDAI 130 5. RANDOM Button With random, you can listen to the tracks in random, rather than sequential order, on all of the discs or on one disc. To use random, do the following: o Press and release the RDM button to play the tracks on all of the discs or on one disc that are loaded, in random order.
1 FEATURES OF YOUR HYUNDAI 131 CAUTION: o Do not insert warped or poor quality discs into the CD player as damage to the unit may occur. o Do not insert anything like coins into the player slot as damage to the unit may occur. o Do not place beverages close to the audio system.
1 FEATURES OF YOUR HYUNDAI 132 INDICATION Er2 Er3 Er6 Er8 HHH no CD B890A01Y-AAT AUDIO FAULT CODE If you see any error indication in the display while using the system in the CD or Tape mode, find the cause in the chart below. If you cannot clear the error indication, take the car to your Hyundai dealer.
1 FEATURES OF YOUR HYUNDAI 133 CARE OF CASSETTE TAPES CARE OF DISCS B850A02L B850A02F-AAT Proper Handling Storage When not in use, place your discs in their individual case and store them in a cool place away from the sun, heat, and dust.
1 FEATURES OF YOUR HYUNDAI 134 o Be sure that the cassette label is not loose or peeling off or tape ejection may be difficult. o Never touch or soil the actual audio tape surfaces. o Keep all magnetized objects, such as elec- tric motors, speakers or transformers away from your cassette tapes and tape player unit.
1 FEATURES OF YOUR HYUNDAI 135 CAUTION: o Be sure to remove the antenna before washing the car in an automatic car wash or it may be damaged. o Before entering a place with a low height clearance, be sure to adjust the roof antenna low. o When reinstalling your antenna, it is important that it is fully tightened to ensure proper reception.
A030A01JM OWNER'S MANUAL A030A01JM-AAT Operation Maintenance Specifications All information in this Owner's Manual is current at the time of publication. However, Hyundai reserves the right to make changes at any time so that our policy of continual product improvement may be carried out.
A010A02A-AAT WARRANTIES FOR YOUR HYUNDAI VEHICLE o New Vehicle 60 Months/60,000 Miles Limited Warranty o New Vehicle 120 Months/100,000 Miles Limited Powertrain Warranty (original owner only) o Anti-P.
A040A01A-AAT FOREWORD Thank you for choosing Hyundai. We are pleased to welcome you to the growing number of discriminating people who drive Hyundais. The advanced engineering and high-quality construction of each Hyundai we build is something of which we're very proud.
A070A01A-AAT CAUTION: MODIFICATIONS TO YOUR HYUNDAI Your Hyundai should not be modified in any way. Such modifications may adversely affect the performance, safety or durability of your Hyundai and may, in addition, violate conditions of the limited warranties covering the vehicle.
A090A01A-AAT SAFETY AND VEHICLE DAMAGE WARNING This manual includes information titled as WARNING, CAUTION and NOTE. These titles indicate the following: WARNING: This indicates that a condition may result in harm, serious injury or death to you or other persons if the warning is not heeded.
A100A03A-AAT Guide to Hyundai Genuine Parts 1. What are Hyundai Genuine Parts? Hyundai Genuine Parts are the same parts used by Hyundai Motor Company to manu- facture vehicles. They are designed and tested for the optimum safety, performance, and reliability to our customers.
T ABLE OF CONTENTS SECTION 5 1 2 3 4 6 7 8 9 10 FEATURES OF YOUR HYUNDAI DRIVING YOUR HYUNDAI WHAT TO DO IN AN EMERGENCY CORROSION PREVENTION & APPEARANCE CARE VEHICLE MAINTENANCE REQUIREMENTS DO-.
INSTRUMENTS AND CONTROLS B250A01JM-AAT B250A01JM-U jmhma-0.p65 9/24/04, 10:10 AM 10.
1. Panel Brightness Control Knob (Rheostat Switch) 2. 4WD Lock Switch (If installed) 3. Traction Control System (TCS) Switch (If installed) / Electronic Stability Program (ESP) Switch (If installed) 4. Instrument Cluster 5. Multi-Function Light Switch (If installed) 6.
YOUR VEHICLE AT A GLANCE SRS (Airbag) Service Reminder Indicator (SRI) B255A01JM-AAT INDICATOR SYMBOLS ON THE INSTRUMENT PANEL Turn Signal Indicator Lights High Beam Indicator Light Low Oil Pressure W.
1 Fuel Recommendations ................................................ 1-2 Breaking in Your New Hyundai ..................................... 1-3 Keys .............................................................................. 1-3 Door ...........
1 FEATURES OF YOUR HYUNDAI 2 B010A01JM FUEL RECOMMENDATIONS CAUTION: Your Hyundai's New Vehicle Limited War- ranty may not cover damage to the fuel system and any performance problems that are caused by the use of fuels containing methanol or fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.
1 FEATURES OF YOUR HYUNDAI 3 KEYS BREAKING IN YOUR NEW HYUNDAI B010F01A-AAT Operation in Foreign Countries If you are going to drive your Hyundai in another country, be sure to: o Observe all regulations regarding registra- tion and insurance. o Determine that acceptable fuel is available.
1 FEATURES OF YOUR HYUNDAI 4 B030C01E-1 DOOR LOCKS ! B040A01A-AAT B030C01JM-AAT ILLUMINATED IGNITION SWITCH (If installed) Whenever either front door is opened, the igni- tion switch will be illuminated for your conve- nience, provided the ignition switch is not in the "ON" position.
1 FEATURES OF YOUR HYUNDAI 5 UNLOCK LOCK HJM2007 B040B01JM-AAT Locking, unlocking front doors with a key o The door can be locked or unlocked with a key. o Lock the door by turning the key toward the front of the vehicle and unlock it by turning the key toward the rear.
1 FEATURES OF YOUR HYUNDAI 6 The door can be locked without a key. To lock the door, first push the inside lock switch to the "LOCK" position so that the red mark on the switch is not visible, then close the door.
1 FEATURES OF YOUR HYUNDAI 7 B045D01JM-AAT Locking From the Inside (Passenger's side) To lock the door from the inside, simply close the door and push the lock switch to the "LOCK" position. When this is done, neither the outside nor the passenger's inside door handles can be used.
1 FEATURES OF YOUR HYUNDAI 8 B070B01JM UNLOCK LOCK THEFT-ALARM SYSTEM B075B01O-AAT Armed Stage Park the car and stop the engine. Arm the system as described below. B070A01A-AAT (If installed) This system is designed to provide protection from unauthorized entry into the car.
1 FEATURES OF YOUR HYUNDAI 9 1 ) Remove the ignition key from the ignition switch. 2 ) Make sure that the hood and tail gate are closed and latched. 3 ) Lock the doors using the transmitter of the keyless entry system. After completion of the steps above, the turn signal lights will blink once to indicate that the system is armed.
1 FEATURES OF YOUR HYUNDAI 10 B070E02HP-AAT Replacing the battery When the transmitter's battery begins to get weak, it may take several pushes on the button to lock or unlock the doors, and the LED will not light. Replace the battery as soon as possible.
1 FEATURES OF YOUR HYUNDAI 11 POWER WINDOWS B060A03Y-AAT The power windows operate when the ignition key is in the "ON" position. The main switches are located on the driver's armrest and control the front and rear windows on both sides of the vehicle.
1 FEATURES OF YOUR HYUNDAI 12 HJM2033 ! B080B02A-AAT Adjusting Seat Forward and Rearward To move the seat toward the front or rear, pull the lock release lever upward. This will release the seat on its track so you can move it forward or rearward to the desired position.
1 FEATURES OF YOUR HYUNDAI 13 ! WARNING: To minimize risk of severe injury in the event of a collision or a sudden stop, both the driver and passenger seatbacks should always be in an upright position while the vehicle is in motion.
1 FEATURES OF YOUR HYUNDAI 14 ! HJM2041 B080H02JM-GAT Seatback table The seatback table is made by folding the front passenger seat forward. To operate the seatback table 1. Lower the headrest. 2. With the recliner control lever pulled up, fold the front passenger seatback forward to the flat position.
1 FEATURES OF YOUR HYUNDAI 15 ! The seat warmer is provided to warm the front seats during cold weather. With the ignition key in the "ON" position, push either of the switches to warm the driver's seat or the passenger's seat.
1 FEATURES OF YOUR HYUNDAI 16 ! ! 3. To return the seatback to its normal position, pull the seatback folding lever and reverse the above procedure. o When you return the seatback to its upright position, always be sure it is locked into position by pulling and pushing on the top of the seatback.
1 FEATURES OF YOUR HYUNDAI 17 ! B140A01B-AAT REAR SEAT WARNING For the safety of all passengers, luggage or other cargo should not be piled higher than the top of the seatback. B140A01JM SEAT BELTS B150B03Y-AAT Infant or Small Child All 50 states have child restraint laws.
1 FEATURES OF YOUR HYUNDAI 18 WARNING: Sitting in a reclined position or lying down when your vehicle is in motion can be dangerous. Even if you buckle up, your seat belts can't do their job when you're re- clined. The shoulder belt can't do its job because it won't be against your body.
1 FEATURES OF YOUR HYUNDAI 19 ! B160A01A-AAT CARE OF SEAT BELTS Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.
1 FEATURES OF YOUR HYUNDAI 20 B190A01Y-AAT SEAT BELTS-Front Passenger and Rear Seat 3-Point System with Combination Locking Retractor Combination retractor type seat belts are in- stalled in the rear seat positions to help accom- modate the installation of child restraint systems.
1 FEATURES OF YOUR HYUNDAI 21 ! NOTE: Although the combination retractor pro- vides the same level of protection for seated passengers in either emergency or auto- matic locking modes, it is recommended that seated passengers use the emergency locking feature for improved convenience.
1 FEATURES OF YOUR HYUNDAI 22 ! WARNING: o When using the rear seat center belt, you must lock all metal tabs and buckles. If any metal tab or buckle is not locked, it will increase the chance of injury in the event of collision. o Never unlock the metal tab (a) and the buckle (b) with the following excep- tions.
1 FEATURES OF YOUR HYUNDAI 23 ! ( 1 ) In case of folding rear seatbacks down. ( 2 ) If transporting an object on the rear seat may cause damage to the rear seat center belt. o Lock the metal tab (a) and the buckle (b) immediately after folding rear seatbacks up.
1 FEATURES OF YOUR HYUNDAI 24 B230B01E-AAT Using a Child Restraint System For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should be of appropriate size for the child and should be installed in accordance with the manufacturer's instructions.
1 FEATURES OF YOUR HYUNDAI 25 B230C05O-AAT Installing a Child Restraint Seat with the "Tether Anchorage" System Three child restraint hook holders are located on the rear luggage compartment floor. To install the child restraint seat tether This symbol indicates the location of each user ready tether anchorage.
1 FEATURES OF YOUR HYUNDAI 26 ! WARNING: o Do not install a child restraint seat at the center of the rear seat using the vehicle's ISOFIX anchors.
1 FEATURES OF YOUR HYUNDAI 27 ! WARNING: If the child restraint seat is not anchored properly, the risk of a child being seriously injured or killed in a collision greatly in- creases. The ISOFIX anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions.
1 FEATURES OF YOUR HYUNDAI 28 HXG229 In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. B180B02JM-AAT Pre-tensioner Seat Belt Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts.
1 FEATURES OF YOUR HYUNDAI 29 ! The seat belt pre-tensioner system consists mainly of the following components. Their loca- tions are shown in the illustration. 1. SRS airbag warning light 2. Retractor pre-tensioner assembly 3. Buckle pre-tensioner assembly 4.
1 FEATURES OF YOUR HYUNDAI 30 ! WARNING: o Pre-tensioners are designed to operate only one time. After activation, pre- tensioner seat belts must be replaced. All seat belts, of any type, should always be replaced after they have been worn during a collision.
1 FEATURES OF YOUR HYUNDAI 31 ! CAUTION: If the seat position sensor is not working properly, the SRS airbag warning light on the instrument panel will illuminate even if there is no malfunction of the SRS airbag system, because the SRS airbag warning light is connected with the seat position sensor.
1 FEATURES OF YOUR HYUNDAI 32 B240A02JM ! Rear impact Side Impact Rollover o The driver should sit back as far as possible while still maintaining control of the vehicle. If you are sitting too close to the airbag, it can cause death or seri- ous injury when it inflates.
1 FEATURES OF YOUR HYUNDAI 33 The SRSCM continually monitors all elements while the ignition is "ON" to determine if a frontal or near-frontal impact is severe enough to require airbag deployment or pre-tensioner seat belt deployment.
1 FEATURES OF YOUR HYUNDAI 34 A fully inflated airbag, in combination with a properly worn seat belt, slows the driver's or the passenger's forward motion, reducing the risk of head and chest injury.
1 FEATURES OF YOUR HYUNDAI 35 ! o The SRS can function only when the ignition key is in the "ON" position. If the SRS SRI does not come on, or continu- ously remains on after illuminate for .
1 FEATURES OF YOUR HYUNDAI 36 ! The occupant classification system is designed to enable(may inflate) the right front passenger's frontal air bag anytime the system senses that a person of adult size is sitting properly in the right front passenger's seat.
1 FEATURES OF YOUR HYUNDAI 37 The occupant classification system can func- tion only when the ignition key is in the "ON" position. If the "PASSENGER AIR BAG OFF" indicator is illu.
1 FEATURES OF YOUR HYUNDAI 38 ! WARNING: ! WARNING: o The occupant classification system can function only when the ignition key is in the "ON" position.
1 FEATURES OF YOUR HYUNDAI 39 ! WARNING: WARNING: o The side impact airbag is supplemental to the driver's and the passenger's seat belt systems and is not a substitute for them. Your seat belts must be worn at all times while the vehicle is in motion.
1 FEATURES OF YOUR HYUNDAI 40 ! o If you sell your vehicle, make certain that this manual is transferred to the new owner. o If your car was flooded and has soaked carpeting or water on the floor, don't try to start the engine; have the car towed to an authorized Hyundai dealer.
1 FEATURES OF YOUR HYUNDAI 41 B240D01JM-AAT Additional Safety Precautions o Never let passengers ride in the cargo area (trunk) or on top of a folded-down back seat. All occupants should sit upright, fully back in their seats with their seat belts on and their feet on the floor.
1 FEATURES OF YOUR HYUNDAI 42 INSTRUMENT CLUSTER AND INDICATOR LIGHTS B260A01JM-AAT B260A01JM-U jmhma-1a.p65 9/24/04, 10:07 AM 42.
1 FEATURES OF YOUR HYUNDAI 43 1. Tachometer 2. Turn Signal Indicator Light 3. Seat Belt Warning Light 4. Supplemental Restraint (AirBag) System Service Reminder Indicator (SRI) 5. Speedometer 6. Parking Brake/Low Brake Fluid Level Warning Light 7. Low Oil Pressure Warning Light 8.
1 FEATURES OF YOUR HYUNDAI 44 WARNING AND INDICATOR LIGHTS B260B01JM-AAT SRS (Airbag) Service Reminder Indicator (SRI) The SRS service reminder indicator (SRI) comes on for about 6 seconds after the ignition key is turned to the "ON" position or after the engine is started, after which it will go out.
1 FEATURES OF YOUR HYUNDAI 45 ! B260H02A-AAT Parking Brake/ Low Brake Fluid Level Warning Light The brake fluid level warning light indicates that the brake fluid level in the brake master cylinder is low and hydraulic brake fluid conforming to DOT 3 or DOT 4 specifications should be added.
1 FEATURES OF YOUR HYUNDAI 46 B260L02HP-GAT DOOR AJAR WARNING LIGHT AND CHIME (If Installed) The door ajar warning light warns you that a door is not completely closed and the chime warns you that the key is in the ignition switch.
1 FEATURES OF YOUR HYUNDAI 47 B260T01O-GAT 4WD System Warning Light (If installed) When the key is turned to the "ON" position, the 4WD(Four Wheel Drive) system warning light will come on and then go off in a few seconds.
1 FEATURES OF YOUR HYUNDAI 48 B270A01O-AAT BRAKE PAD WEAR WARNING SOUND The front and rear disc brake pads have wear indicators that should make a high-pitched squealing or scraping noise when new pads are needed. The sound may come and go or be heard all the time when the vehicle is moving.
1 FEATURES OF YOUR HYUNDAI 49 B330A03A-AAT TACHOMETER The tachometer registers the speed of your engine in revolutions per minute (rpm). CAUTION: The engine should not be raced to such a speed that the needle enters the red zone on the tachometer face.
1 FEATURES OF YOUR HYUNDAI 50 Reset Switch B310B02JM HJM2185 A Type B Type B310B02JM-EAT ODOMETER/TRIP ODOMETER 1. Odometer The odometer records the total driving distance in miles and is useful for keeping a record for maintenance intervals. NOTE: Any alteration of the odometer may void your warranty coverage.
1 FEATURES OF YOUR HYUNDAI 51 2. Distance to Empty B400B03JM-A o This mode indicates the estimated distance to empty with the current fuel in the fuel tank and distance to empty symbol. o When refueling with more than 2 gallons (8 liters), the trip computer will recognize refu- eling.
1 FEATURES OF YOUR HYUNDAI 52 MULTI-FUNCTION LIGHT SWITCH B340A01A-AAT COMBINATION TURN SIGNAL, HEADLIGHT AND HIGH-BEAM SWITCH Turn Signal Operation Pulling down on the lever causes the turn signals on the left side of the car to blink. Pushing upwards on the lever causes the turn signals on the right side of the car to blink.
.
1 FEATURES OF YOUR HYUNDAI 54 WINDSHIELD WIPER AND WASHER SWITCH B340G01L-GAT Auto Light (If installed) To operate the automatic light feature, turn the barrel on the end of the multi-function switch.
1 FEATURES OF YOUR HYUNDAI 55 B350C01O-AAT Adjustable Intermittent Wiper Operation To use the intermittent wiper feature, place the wiper switch in the "INT" position. With the switch in this position, the interval between wipes can be varied from approximately 1 to 18 seconds by turning the interval adjuster barrel.
1 FEATURES OF YOUR HYUNDAI 56 HJM2098 HJM2097 HAZARD WARNING SYSTEM FRONT FOG LIGHT SWITCH B370A01A-AAT The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible.
1 FEATURES OF YOUR HYUNDAI 57 NOTE: The ignition must be in the "ON" position for the rear window defroster to operate. CAUTION: Do not clean the inner side of the rear window glass with an .
1 FEATURES OF YOUR HYUNDAI 58 CIGARETTE LIGHTER B420A01A-AAT For the cigarette lighter to work, the key must be in the "ACC" position or the "ON" position. To use the cigarette lighter, push it all the way into its socket. When the element has heated, the lighter will pop out to the "ready" position.
1 FEATURES OF YOUR HYUNDAI 59 HJM2159 ASHTRAY / COIN TRAY B430A01JM-AAT The front ashtray/coin tray may be opened by pushing and releasing the ashtray lid. To re- move the ashtray to empty or clean it, lift the ashtray upward and pull it out. The ashtray coin tray light will only illuminate when the external lights are on.
1 FEATURES OF YOUR HYUNDAI 60 SUNROOF ! B460A01Y-AAT (If installed) Sun Shade Your HYUNDAI is equipped with a sliding sun- shade which you can manually adjust to let in light with the sunroof closed, or to block sunlight. WARNING: Never adjust the sunshade while driving.
1 FEATURES OF YOUR HYUNDAI 61 B460C01JM-AAT Tilting the Sunroof Auto tilt open To use the autotilt feature, momentarily (more than 1 second) press the TILT UP button on the overhead console. The sunroof will tilt all the way open. To stop the sunroof tilting at any point, press any sunroof control button.
1 FEATURES OF YOUR HYUNDAI 62 Close To close the sunroof, press the CLOSE button on the overhead console and hold it until the sunroof is closed. NOTE: After washing the car or after there is rain, be sure to wipe off any water that is on the sunroof before operating it.
1 FEATURES OF YOUR HYUNDAI 63 INTERIOR LIGHT B480B01JM-AAT Map Light Push in the map light switch to turn the light on or off. This light is convenient as a map light at night or as a personal light for the driver and the passenger. HJM2028 3. Insert the hexagonal head wrench provided with the vehicle into the socket.
1 FEATURES OF YOUR HYUNDAI 64 HJM2145 B490A01JM-AAT INTERIOR LIGHT The interior courtesy light has two buttons. The two buttons are: o DOOR In the "DOOR" position, the interior courtesy light comes on when any door is opened regard- less of the ignition key position.
1 FEATURES OF YOUR HYUNDAI 65 B510A01A-AAT Manual Type The outside rearview mirrors are equipped with a remote control for your convenience. It is operated by the control lever in the bottom front corner of the window.
1 FEATURES OF YOUR HYUNDAI 66 The outside rearview mirrors can be adjusted to your preferred rear vision, both directly be- hind the vehicle, and to the rear of the left and right sides. The remote control outside rearview mirror switch controls the adjustments for both right and left outside mirrors.
1 FEATURES OF YOUR HYUNDAI 67 DAY/NIGHT INSIDE REARVIEW MIRROR ! B510C01A-AAT FOLDING THE OUTSIDE REARVIEW MIRRORS To fold the outside rearview mirrors, push them toward the rear. The outside rearview mirrors can be folded rearward for parking in narrow areas.
1 FEATURES OF YOUR HYUNDAI 68 2. Press the "COMP" button for more than 3 seconds. The current zone number will appear in the display. 3. Press the "COMP" button until the new zone number appears in the display. After you stop pressing the button, the display will show a compass direction within a few sec- onds.
1 FEATURES OF YOUR HYUNDAI 69 ! TAIL GATE B540A01JM-AAT o Pull and raise the "DOOR" release lever to open the tail gate. o To close, lower the door, then press down on it until it locks. To be sure the door is securely fastened, try to pull it up again.
1 FEATURES OF YOUR HYUNDAI 70 B540C01JM-GAT LUGGAGE COMPARTMENT LIGHT Luggage compartment light has a 3-position switch. The three positions are: o In the "DOOR" position, the luggage com- partment light comes on when the tail gate is opened, then goes out when it is closed.
1 FEATURES OF YOUR HYUNDAI 71 B650A01S-AAT Stowage Precautions 1. Do not place objects on the cargo security screen. Such objects may be thrown about inside the vehicle and possibly injure vehicle occupants during an accident or when brak- ing. 2. For better fuel economy, do not carry unnec- essary weight.
1 FEATURES OF YOUR HYUNDAI 72 Raise the luggage under tray cover with the grip. After using it lock the luggage under tray cover by turning the lever toward "LOCK". HJM2168 HJM2167 Before using the luggage under tray, remove the luggage mat.
1 FEATURES OF YOUR HYUNDAI 73 Luggage Side Trim HJM2163 There are small article trays in the luggage side trim. B655A01JM-GAT Covering shelf screen (If Installed) Covering shelf screen veils the luggage room to hang the screen hook to a headrest pole.
1 FEATURES OF YOUR HYUNDAI 74 ! B540D03HP-GAT Luggage Net (If Installed) Some objects can be kept in the net in the luggage compartment. Use the luggage net on the floor or at the back of the luggage compartment to prevent objects from sliding.
1 FEATURES OF YOUR HYUNDAI 75 HJM2018 REMOTE FUEL-FILLER LID RELEASE B560A02JM-AAT The fuel-filler lid may be opened from inside the vehicle by pulling up on the fuel-filler lid opener located on the front floor area on the left side of the vehicle.
1 FEATURES OF YOUR HYUNDAI 76 B560A01JM ! WARNING: o If you open the fuel filler cap during high ambient temperatures, a slight "pres- sure sound" may be heard. This is nor- mal and not a cause for concern. Whenever you open the fuel filler cap, turn it slowly.
1 FEATURES OF YOUR HYUNDAI 77 ! Before closing the hood, return the support rod to its clip to prevent it from rattling. Lower the hood until it is about 1 ft. (30 cm) above the closed position and let it drop. Make sure that it locks into place. WARNING: o Always double check to be sure that the hood is firmly latched before driving away.
1 FEATURES OF YOUR HYUNDAI 78 FLOOR MAT ANCHOR ! B571A03Y-AAT When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor in your vehicle. This keeps the floor mat from sliding forward. WARNING: o Make sure the floor mat is properly placed on the floor carpet.
1 FEATURES OF YOUR HYUNDAI 79 FRONT DOOR EDGE WARNING LIGHT B620A01S-AAT A red light comes on when the front door is opened. The purpose of this light is to assist when you get in or out and also to warn passing vehicles. B620A01JM HJM2067 STEERING WHEEL TILT LEVER ! To Adjust the Steering Wheel: 1.
1 FEATURES OF YOUR HYUNDAI 80 B610A01JM HORN B610A01L-GAT Press the pad on the steering wheel to sound the horn. HJM2043 REAR SEAT ARM REST B611A01Y-AAT This arm rest is located in the center of the rear seat back.
1 FEATURES OF YOUR HYUNDAI 81 B660C01JM B660C04E-AAT To Cancel the Cruise Speed To disengage the cruise control system, pull the control switch toward the steering wheel to the "CANCEL" position. Additionally, the following actions will disengage the system: o Depress the brake pedal.
1 FEATURES OF YOUR HYUNDAI 82 B660D01JM B660D01E-AAT To Resume the Preset Speed B660E01E-AAT To Reset at a Faster Speed 1. Push the control switch upward to the "RE- SUME (ACCEL)" position and hold it. 2. Accelerate to desired speed and release the control switch.
デバイスHyundai Tucson (2005)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Hyundai Tucson (2005)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはHyundai Tucson (2005)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Hyundai Tucson (2005)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Hyundai Tucson (2005)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Hyundai Tucson (2005)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はHyundai Tucson (2005)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Hyundai Tucson (2005)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちHyundai Tucson (2005)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
