IBMメーカー22P6415の使用説明書/サービス説明書
ページ先へ移動 of 62
IB M ® Hig h R a t e Wi r e l e s s LAN G a t e w a y Us e r ’ s G u i d e OP T IONS by I B M.
Note: Before using this information and the pr oduct it supports, be sure to r ead the IBM High Rate Wir eless LAN Gateway Safety and Warranty Information that comes with your option.
Contents Preface ........................ v About this book ..................... v Registering your option .................. v Part 1: Product description ................ 1 - 1 Part 2: Configuration .................. 2 - 1 W eb-based interface ...
Connecting to other routers ................. 7 - 1 T r o u b l e s h o o t i n g .................... 7 - 2 Part 8: Notices .................... 8 - 1 iv IBM ® High Rate W ir eless LAN Gateway: User.
Preface About this book This User ’ s Guide contains instructions for installing and using the IBM ® High Rate W ireless LAN Gateway . The User ’ s Guide contains the product description and usage instructions.
vi IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 1: Product description The IBM High Rate W ireless LAN Gateway provides small of fices and home offices (SOHO) an economical way to connect a small local ar ea network (LAN) to the Internet using an external DSL/Cable modem. W ith its built-in wireless access point, you can connect your IEEE 802.
v DMZ : The IBM High Rate W ireless LAN Gateway can support some special applications and Internet games. W ith DMZ, one designated computer is removed fr om behind the built-in firewall and exposed to the Internet. This speeds up Internet gaming and might be requir ed from special applications.
v One IBM High Rate W ireless LAN Gateway unit v One AC power supply v One power cord Note: In the event that your Gateway comes with two power cords, be sur e to use the one labeled for your country . One is labeled for use in the United States and Canada, and one is labeled for use in Japan.
1-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 2: Configuration The IBM High Rate W ireless LAN Gateway has a W eb-based setup utility . Note: It is not recommended that multiple users be logged into the W eb-based setup utility at the same time. Web-based interface The W eb-based setup utility has an easy-to-use graphical user interface (GUI).
Note: All IBM High Rate W ireless LAN Gateways are factory-configur ed with ″ default ″ as the default Administrator name with no password needed. After login, the Language selection window opens. 5. Select your language by clicking the appropriate icon.
v Help : Displays related help information v Delete : Deletes an entry in the configuration table Saving configurations The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply .
2-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 3: Setting up the wireless access point in the IBM High Rate Wireless LAN Gateway The IBM High Rate W ireless LAN Gateway is a multifunctional device with an integrated IEEE 802.1 1b-compliant W iFi certified access point. Y ou can use it as a base station for your wireless network.
Channels are the spectrum range wher e your wir eless signals are transmitted. The clearer the channel, the better your network performance. Y ou can select the desired channel fr om the pull-down menu. W ired equivalency privacy (WEP) encrypts the packets sent by the wireless Gateway .
Wireless Settings - Advanced Request to send (R TS) Threshold: In some situations, not all clients in a WLAN are awar e of each other (hidden node problem). That can lead to dif fer ent WLAN clients transmitting to the Gateway at the same time, therefor e jamming both transmissions.
Wireless Settings - MAC Control Setup After you enable the MAC access limit function, then you can determine the access mode. In IEEE 802.1 1b-compliant devices, the MAC address is a means of controlling network access. MAC addresses can be found in the package of the network interface card (NIC).
Block or Allow: Y ou can list specific MAC addresses to block or allow in this window . Blocking a specific MAC address will allow everyone else with the correct settings to access the LAN and the Gateway . Allowing a specific MAC address will allow only that MAC addr ess access to the LAN and Gateway as long as WEP and ESSID ar e correct.
v Multicast Packets: 0 v Multicast Packets: 0 v Multicast Bytes: 0 v Multicast Bytes: 0 v W ireless T ransmit Error v W ireless Receive Error v Deferred T ransmissions: 0 v Packet FCS Errors: 0 v Retr.
– Retry Limit Exceed : The number of packets not transmitted doe to excessive retries – Single Retries : The number of packets successfully transmitted after exactly one retry – Multiple Retries.
3-8 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 4: Setting up client computers for Internet access This section provides information on setting up client computers for Internet access. Client computer requirements Client computers can use Microsoft ® W indows ® products, Novell Netware, Linux, or Unix.
5. Select Obtain an IP address automatically . 6. Click the DNS tab. 7. Select Disable DNS . 8. Save the changes, and then restart your computer . Y our computer will be able to access the Internet through the Gateway . Note: If you do not want to use DHCP service, you must manually configur e the IP addr ess of your computer .
9. Add the IP addr ess of the server to the DNS Server Search Or der list. 10. Save the changes, and then restart your computer . Y our computer can access the Internet through the server .
6. Click Properties . 7. Click to check the Obtain an IP address automatically radio button. 8. Click to check the Obtain DNS server address automatically radio button. 9. Click OK . 10. Click OK again. 11 . Restart your computer . Y our computer is able to access the Internet through the server .
7. Save the changes, and then restart your computer . Y our computer is able to access the Internet through the server . Setting up Windows NT 4.0 W orkstation clients Before setting up a W indows NT 4.0 W orkstation client, be sure that the TCP/IP pr otocol is installed with your Ethernet network card.
4-6 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 5: Using tools for advanced configuration This section provides instructions for using the advanced configuration tool in the W eb-based setup utility . Advanced configuration Click Advanced Configuration to display the Advanced Configuration table.
v DHCP : The DHCP featur e can be enabled or disabled. v DHCP Start Address : This is the starting IP addr ess of the IP addr ess pool in the DHCP server . The default is 192.168.1.1 1. v DHCP End Address : This is the end address of the addr ess pool in the DHCP server .
2. Click Add to add a new entry in the Fixed IP table. v IP Address : The specified IP addr ess for the client device. This IP address must be within the addr ess pool in the DHCP server . v MAC Address : The MAC address of the client device v Remark : The descriptions of the client device that needs the fixed IP address 3.
2. Click Add to add a new entry in the Excluded IP table. v IP Address : Enter the specified IP addr ess. The IP addr ess must be within the address pool of the DHCP server . v Remark : The descriptions of the excluded IP addr ess 3. Click Apply . A new entry is added to the Excluded IP table.
2. Click Add to add a new entry in the BOOTP IP table. v IP Address : The specified address used by the BOOTP protocol. This IP address must be within the addr ess pool in the DHCP server . v MAC Address : The MAC address of the client device used for that IP address v Remark : The descriptions of the IP addr ess 3.
v DMZ Host : In the blank field, type the IP addr ess of the computer you want to use for DMZ. Note: T urning on DMZ can cause potential security holes on your local network.
2. Click Advanced Configuration , and then click Firmware Upgrade to display the Firmware Upgrade page. 3. Browse for the file you just downloaded. 4. Click the update button. 5. Follow the on-screen instructions. Note: If the firmware upgrade pr ocess is interrupted, you will need to use the FirstAid Utility to reflash the firmwar e.
In this table, you can change the TCP/IP settings of the Ethernet LAN interface of the Gateway . v MAC Address : Displays the media access control (MAC) addr ess of the LAN interface. It is displayed in six pairs of hexadecimal numbers. v LAN IP Address : This is the IP addr ess of the Gateway on the LAN/WLAN interface.
Language select Click Advanced Configuration , and then click Language select to display the Language select page. Select English or Japanese in the Language pull-down menu. Selecting Default will display the language select page the next time you log into the IBM High Rate W ireless Gateway .
Click Advanced Configuration → MAC address clone to display the MAC address clone page. Select one of the following: v Auto acquire from first connected PC. Make sur e the PC with the desired MAC address is the only PC connected to the Gateway . Then select auto acquire and click on Apply .
Y ou can enable or disable packet filtering by selecting Enable or Disable from the pull-down menu at the top of the table. Note: It is recommended that you select Enable and click on Apply before configuring any of the available packet filtering rules.
2. Click Add . 3. Enter the IP addr ess of the Internet site that the LAN users are pr ohibited from accessing. 4. Click Apply . The IP rule table has a new entry added to it.
2. Click Add to add an entry into the Port rule table. v Service T ype : TCP or UDP service v Protocol : Select the protocol (or application) such as FTP or HTTP . If a well-known protocol is selected fr om the list, then the corresponding port number is set according to various Internet standar ds.
1. Click URL Rule to display the URL rule table. 2. Click Allow or Block . This will permit you to either block the specified URL, or allow ONL Y the specified URL. 3. Enter the URLs of the Internet sites that you wish to control access for the LAN users.
4. Click Apply at the bottom of the screen. Note: The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply .
destination and file name. T o restore a pr ofile, use the Browse button to find the name of the configuration file to be restor ed. Click the Upload button. T o download a file from the Gateway , click Download Config T extfile . The following dialog box is displayed: Click the Open button the work with the file in a text editor .
routers on your network and at least one of the r outers is connected to more than one network (or subnet). T o route TCP/IP , do the following: 1. Click Advanced Configuration → Static Routing T able to display the static routing table. 2. Click Add to add a new entry into the static routing table.
T o add a V irtual Server , do the following: 1. From the left-hand navigation bar , click Advanced Configuration → V irtual Server Configuration to display the V irtual Server table. Y ou can enable or disable the V irtual Server function by selecting Enable or Disable from the pull-down menu at the top of the table.
Click Apply to complete the configuration of your V irtual Server . Note: The configuration changes made through the W eb-based setup utility are automatically saved into the flash memory within 30 seconds after clicking Apply . Change password From the left-hand navigation bar , click Change password to display the Change password table.
Reset factory defaults From the left-hand navigation bar , click Reset factory defaults to display the Reset to factory default page. Click the Reset factory defaults button.
Restart Wireless Gateway T o restart your Gateway , click Restart wireless gateway . The following dialog box is displayed. Click OK to restart the IBM High Rate W ireless Gateway .
5-22 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 6: System information and help This section provides system information and information on the Help featur e of the IBM High Rate W ireless LAN Gateway . System Information T o display the system information table, click System Information . Click Refresh to read or r efresh the system status.
– DHCP : Displays the status (enabled or disabled) of the DHCP and the range of IP addr esses controlled by the DHCP server v Internet-Broadband Status : – MAC Address : The Ethernet MAC address o.
Part 6: System information and help 6-3.
6-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 7: Tips and T roubleshooting Connecting to other routers The IBM High Rate W ireless LAN Gateway can be connected to another router in the following manner: 1.
v Connect the router with the DHCP service to a LAN port on the Gateway . Note: The Gateway configuration page is still available at the new LAN IP addr ess.
After verifying that the LAN path works correctly , test the path from your computer to a remote device: 1. Connect your Gateway to the Internet with a DSL/Cable modem. 2. If you are using a W indows-based computer , click Start → Programs → Accessories → Command Prompt .
7-4 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
Part 8: Notices 1. Y ou are str ongly encouraged to download the latest drivers for your W ireless LAN clients (e.g. PC Card or USB devices) 2. Y ou must use Microsoft Internet Explor er 5.0 or later , or Netscape Navigator 4.0 or later , when accessing the W eb-based setup utility for the IBM High Rate W ireless LAN Gateway .
8-2 IBM ® High Rate W ir eless LAN Gateway: User ’ s Guide.
.
Part Number: 22P6415 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber . (1P) P/N: 22P6415.
デバイスIBM 22P6415の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
IBM 22P6415をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはIBM 22P6415の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。IBM 22P6415の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。IBM 22P6415で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
IBM 22P6415を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はIBM 22P6415の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、IBM 22P6415に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちIBM 22P6415デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
